Published content as SCORM 1.3 (2004) - view Table of Contents?

I've published some UPK content (A module containing 13 topics) created in 3.6.1 as SCORM 1.3 (2004).
I have zipped up the content in the Publishing Content > LMS folder so that the imsmanifest file is in the root of the .zip. I have uploaded this file into an LMS (Activate LMS) but when I then launch the content from the LMS I do not see the TOC page and can only complete the first topic in the module. When I complete this Topic I can't then exit it (apart from closing the entire window) and this then doesn't update the module as being started.
The URL that the LMS is loading points only to the topic that does load.
Why is this and how can I configure the content so that the LMS points to the TOC page and not just a single topic.
Thanks,
Greg

The best way to import from my experience into an LMS is to import at 1.2. do not use the zip file. unzip the file to your LMS server, then import the .xml 1.2 manifest file.
if you are using 11.0. select show navigation buttons. This shows the entire structure of my file.

Similar Messages

Captivate 4 not Zipping Published content if SCORM options turned on!

I am having a HUGH issue... Captivate 4 is not Zipping published files if the SCORM options are turned on... I've been using captivate for years, it's not rookie mistake.
When you enable the scorm options and publish it doesn't zip the published content. If you disable SCORM it zips them just fine.
PLEAS HELP SOMEONE!!!! Adobe support is not help at all... one actually told me to return the product.

If that's the only issue, why not just zip the resulting content yourself? Both Mac and Windows offer built-in methods for creating .zip files...
IS that the only issue?
Does your lesson have scored interactions?
You've setup the preferences/tracking correctly?
.zip is checked in the publish options? And it just doesn't .zip?
Erik

Publishing to Skillport - SCORM/Reporting settings?

I'm currently publishing eLearning courses to Skillport using Adobe Presenter 7. These courses are simply slides with narration and a few embedded CP demos and no quizzing (I'm basing course completion on the end user viewing 100% of the slides). I am publishing to SCORM 1.2 RTE with the following Reporting options selected:
SCORM 1.2
Report Slide Views Only - 100%
Report Status as defined by report data
Report Score to LMS as Score
Only Report the score
These seem to be the only settings that track anything so far. The problem is, as soon as I launch a course, it is marked as 100% complete. Ideally I'd like to be able to track if the user only views 1/2 of the course (it should show 50%) or 80% etc. Does anyone have experience publishing courses to Skillport or know of any settings I can try? I've tried multiple combinations and can't seem to get anything to work (except the settings above which marks completion at 100% right away). Any help would be much appreciated, thanks in advance.

Simul8,
I'm not familiar w/ Skillport...but I do have experience w/ Docent, Blackboard, and GeoLearning LMS's.
I've also seen this kind of question come up a lot in the last several months, so if you don't mind, I'm going to steal one of my responses from a different post and copy it here...and who knows, perhaps something useful will come of it.
That said, even though you don't have any questions in your presentation, I'd strongly recommend adding a Quiz element anyway. The reason is that specific pieces of information can be communicated to an LMS that may not be available unless a Quiz is used. And remember: a Quiz is nothing more than a "container" or a "shell" that a presentation uses when you have question slides in your content.
While we're at it, here's something you can check: if your presentation is quiz-free, then most likely you won't see the "scorm_support" folder in the root of your published project. That will all change once you add a Quiz to your deck.
So let's try this: Get back into your deck and go into the Quiz Manager. Add a Quiz, and for now, set the Pass/Fail to 0. Leave everything else alone and click the Reporting tab and use the following settings:
Enable reporting and select "SCORM".
Immediately after that, click the Manifest button to toggle for SCORM 1.2.
You already have "slide views only" set, so that's okay.
Report Pass/Fail: "defined by report data"
At this point, Report Score / Reporting Level shouldn't matter because of the former selections/settings, so you can leave those alone.
Again, all we did is add a Quiz to the deck—there are no question slides to worry about! Having done all this, save and publish your deck and then test it on Skillport. If you determine that Skillport is throwing some wierd data (for example you might see: cmi.suspend_data = "not attempted" or cmi.total_time = "P"), then you may need to do some additional homework. If that's the case, what you'll need to do is manually update a variable in the scorm_support.js file (it can be found in the scorm_support folder in your published content's folder).
Look for the following line:
var g_nAPI = 0; // type of API to start searching for; allowable values: 0 - SCORM 2004; 1 - SCORM 1.2 (or 1.1)
Even though your content may have been published for SCORM 1.2, the variable g_nAPI is probably set for SCORM 2004. To overcome that problem, change that value to 1 to get the LMS communicating properly between Presenter and Skillport. I've run into a similar problem when launching Presenter content on a Blackboard system. Not fun. And I don't know why this happens, especially when you toggle for SCORM 1.2....but it does and it's frustrating.
Anyway, sorry for the long rant...and again, although I'm not specfically familiar w/ Skillport, I think the above will help.
Rob
http://www.robrode.com/yabb/

Workflow Problem : Publishing &Content Archiving

Hi all,
Thanks a lot for your help.
Let me be more clear in my question.
I am using the XML Form Builder 'Edit' page to uplaod a document. Once I click on the 'Save' button of the 'Edit' form, the content automatically gets displayed on the 'renderListItem' form and subsequently on the 'Show' form as well.
Also the document gets saved in the .xml format in one of the folders for which I have set up the workflow.
But now, the question is what is the point in setting up the workflow for a document when it gets displayed as soon as it is uploaded.
So I wanted to know how I can prevent the form from getting displayed on the 'renderItemList' form before it gets approved.(assuming that the user will always Submit the document for approval)
Jus for additional information, my workflow consists of the following,
Editor->approver->publisher->Reader(only for viewing the published contents)
Thanks and regards
Srikant

Mike, thanks for the response.
To your first question, I've looked here on MSDN as well as Google. Most information points to the indivivual not "publishing" their workflow to that list - that's not my situation. I click on the Publish button, but I get no workflow.
To your second point; I created a plain-vanilla list workflow (not a Reusable Workflow), and attached it to the desired list. When I show the workflows in SPD, my new workflow is listed under the List Workflows and when I view the SPD page displaying the
workflow settings for this workflow, and click on the "Open associated list" link, it pulls up the appropriate list.
To your third point; when I pull up the workflow settings from the list, it shows that "There are no workflows associated with this list" - as if the "publish" never happened.
This is driving me crazy!

Editing a previously published content item results in no workflow applied

Hi,
We have developed numerous workflows, which are configured as default from New menu configurations.
We are seeing two issues:
1) Copying an existing content item, the assigned workflow to the New menu is not applied. This is apparently by design in 11g (did work in 7.x) according to Oracle support. We have raised a product enhancement request
2) Editing a content item which has passed through its workflow stages and has been published, the previously assigned workflow is not assigned.
Issue 2) is what we are looking into now. Apparently (again) this is by design.
Is there a common approach that people are using to resolve this issue, in that editing a previously published content item, those changes will be subject to the original workflow stages before it will be re-published?
We have heard mentioned of listeners or further stages in the workflow...
Thanks

then use SPD to customize the task process to lock them out upon starting and give them rights again upon rejection.
http://office.microsoft.com/en-us/sharepoint-designer-help/use-the-task-process-editor-for-approval-workflows-HA101863538.aspx
Please mark my response as an answer if appropriate.
Learn.SharePoint.com
Hi
How was this resolved in the end. I to want to disable editing of document whilst workflow in progress. In SPD how is this achieved?
Thanks

Publish completed, but no new folio in viewer

I've published a new folio to our branded viewer, but it still hasnt shown up in the viewer. Usually, I can count on the folio showing up within minutes after the 'completed' message. I know there were server issues yesterday, so maybe there are still issues? Or latency?
This particular folio only has one article, and is horizontal only.
The completed messsage time was - Tue Nov 06 05:48 PST 2012
Thanks,
-Mark Kunoff
Informational Systems Specialist
IU Communications
Indiana University Public Affairs and Government Relations
[email protected]

folio should appear within couple of minute after successfull publish. Double check to make sure the folio status is not "Private"
Also, re-launch your viewer to re-fresh the library and see.

Publishing Content Items through API

Hello,
I am currently using EDK 5.3 for publishing content items. I have been sucessful in editing an existing content item using APIS. However It looks like APIS doesn't have a way to schedule to publish content items for a future date.
I tried to do some reverse engineering and found out that this information is stored in pcsscheduledcontent and pcsscheduleitems tables. I was able to figure out how to change the dates as this are stored in pcsscheduleitems table,however can't find out where are the values are being stored for time.
Say, I want to publish the content item for 08/28/2008 4:00 pm using the APIS, I am able to get to the date from the above 2 tables but really can't find out where the time is stored. I have tested from the User interface that the time is also retained based on the options we pick.
And also I have seen that the Loadid keeps on increasing for every change I make.
Can someone please help me/ guide me in the right direction?
Thanks.

pcsscheduledContent table. schedule something to be published in the future and then do a select on that table with an order by clause of :
ORDER BY ITEMBEGINDATE DESC
The itembegindate column contains the date AND time of the publishing schedule. you may just not be converting the value correctly.
hth,
Robert

Rtmt error exception in publish content on Critical Services cucm

Hi everybody, i have a problem with RTMT version 8.7 over CUCM 8.5.1.10000, when i try see the Critical Services of my cluster, i see a error "Exception in publish content", and it not show my service list, another functions of my RTMT have not any problem, only this. i attach an image.
Can anybody help to me or suggest what is the problem.
Thanks for advanced.

i found the problem just now, this occurs when you have a mixed cluster UCS/MCS, the reference of this bug is presented in the next link,
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCty47592
this was fixed in the release 8.6(2.23061.1) and up.

I am trying to publish my site so a client can view it. In the past I have not had trouble with this

I am trying to publish my site so a client can view it. In the past I have not had trouble with this

Adobe really does have the worst customer service/tech support of any product I have ever experienced. It is so unfortunate.
Date: Tue, 13 Aug 2013 08:26:34 -0700
From: [email protected]
To: [email protected]
Subject: I am trying to publish my site so a client can view it. In the past I have not had trouble with this
    Re: I am trying to publish my site so a client can view it. In the past I have not had trouble with this
    created by Brad Lawryk in Help with using Adobe Muse CC - View the full discussion
We need a little more info ..
Where are you publishing to and what is happening when you try and publish?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5590683#5590683
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5590683#5590683
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5590683#5590683. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Publisher Content to the Knowledge Directory

Hello,
I want to publish a single portlets published content to the knowledge directory. Let's call the portlet 'Policy Info'
So I created a publisher crawler. Unfortunately, it would not let me drill down to the exact portlet. I only gave me a choice at the root level of all the portlets. (I don't want all publisher portlet content item to show up in the KD).
I tried to create a filter that would grab only info from that specific portlet. But the filter does not have a property to specify the portlet name. I can create a filter on each content item, but that means adding or deleting a filter every change.
Any ideas how to get the published content from 1 specific folder into the KD?
Thanks,
V
Computers are like Old Testament gods; lots of rules and no mercy. ~Joseph Campbell

Vivek,
It should allow you to do so. You can drill down to the exact portlet folder and configure that folder in the Publisher Crawler.
Note: All root level folders are Hyperlinks, when displayed while creating a publisher crawler. Click on the root folder and navigate to your portlet folder.
Thanks,
Bharat
Bharat Karthik
[email protected]
http://www.eminenttech.com/

I can't publish preview any of my MX 2004 swf

Just upgraded to flash 8 on OSX, but now I can't publish
preview any of my MX 2004 files, I get an output error can't find
URL? If I create a new flash file in 8 and publish preview, it
works fine??? any pointers?

??

Error Code 116 when publishing content in UPK

Hi,
When publishing content i get the following error msg:
Parsing related applications .... [269]
Error: The application 'PSENTONE' folder does not contain an objects map database. [116]
Would appreciate any help on this.
Thanks in advance.

Hi,
When publishing content i get the following error msg:
Parsing related applications .... [269]
Error: The application 'PSENTONE' folder does not contain an objects map database. [116]
Would appreciate any help on this.
Thanks in advance.

Publishing Content Types from Hub in Bulk

I am able to publish content types from the hub just fine. However, I am in a migration scenario where over 1500 content types are being migrated to SharePoint Online from SP2013. We have successfully migrated these to the content hub, managed metadata stores,
etc. However, when they are migrated, the publish property does not migrate with it.
On-Premises, we could publish all of these with PowerShell so they could be consumed by the syndicated sites. Is there a way to publish all of these so that we don't have to go into each once via the UI?

Depends who you give access too. What I'd consider doing is making a copy of what you consider to be the template for the rest of the content types, save that to a unique category within the list of content types and then build the rest off that. Show the
client how to make changes to JUST that template and in theory you'll be fine.
Or, are the content types in use already?
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Publisher trouble : Published Content based portlets disabled

I've configured an environment with an instance of publisher. Later, I've created a publisher redirector, and republished all items in the publisher back office
For some obscur reasons, since this last modification, I cannot create new portlets based on the Published Content web service. I always got the message "This portlet has been deactivated. Contact your portal administrator."
I've checked the Published Content web service and it's enabled
Where is the error ? Must I configure something in another place ?
Another error, that has a probable relation with this previous error : I'm not able to do a "preview" of all my content items under the publisher back office, I always got an error saying me that or the page is unknown

The exact problem is : after importing the PTE file published_content_portlets.pte, I cannot use the newly imported portlets.
For example, when I want to create a new portlet base on the template "News" french localized, I cannot modify this new portlet : I got a popup which told me that the template is not properly configured or files are missing.
By the way, when I open the publisher explorer, I can see all the portlets I've imported but they are not published

Problem in zip generation when exporting Publisher content

Hi all
On AIX when exporting, the publisher content size of the generated zip located in ptcs/6.4/settings/migration/ is changing between exports.
For example, the first time export generates a 1234 bits file and the second (same content is exported) generates a 1238 bits file.
does anybody know why?

Hi all
On AIX when exporting, the publisher content size of the generated zip located in ptcs/6.4/settings/migration/ is changing between exports.
For example, the first time export generates a 1234 bits file and the second (same content is exported) generates a 1238 bits file.
does anybody know why?

Published content as SCORM 1.3 (2004) - view Table of Contents?

Similar Messages

Maybe you are looking for