Publishing and receiving a webcam broadcast
I have Flash Media Server 2 installed, and would like to
write an application whereby two people can chat one on one.
Now, I don't want to use simpleconnect, as I'd like to
integrate this into an existing website with it's own
authentication methods.
I've been attempting to get it working, but although I can
get the local webcam displaying fine, and can even tweak the
quality etc., I can't for the life of me get it published remotely.
If anyone has any pointers, that'd be great.
So far with regard to the video publishing part of it, I've
come up with:
quote:
localCam = Camera.get();
localVideo.attachVideo(localCam);
sConn = new NetConnection();
sConn.connect("rtmp://localhost/1", "test");
lStream = new NetStream(rConn);
lStream.publish(localCam);
Also, am I right in thinking that to retrieve a webcam stream
from the rtmp source, I would have to use
http://host/appinstance/clientid
Or would this not be the way?
Have you checked out the samples on devnet? You should find
everything you need there.
Why are you using rConn instead of sConn to establish your
netstream?
sConn = new NetConnection();
sConn.connect("rtmp://localhost/1", "test");
lStream = new NetStream(
rConn);
I think this was just a typo.
When you publish, give it a name:
Instead of using: lStream.publish(localCam);
do lStream.publish(username); // where username is a string
Check out the flashmediaserver_cs_asd.pdf, page 102.
Also, currently you don't care whether or not the connection
has been established. Make sure you wait before you create your
Netstream on top of the connection. There is a great article on how
to build such an application on Adobe Devnet:
http://www.adobe.com/devnet/flashcom/articles/broadcast_receiver.html
To build a 2-way chat you would also have to put both users
in the same "room". The easiest way to achieve this is to create
new application instances for each new user pair, then connect to
with rtmp://host/application/new_instance _name and play the video
of the other user.
There's some information in article
http://www.adobe.com/devnet/central/articles/vchat_04.html
This article is about how to build a 2-way video chat w/
central, but you can possibly strip out that code.
Instead, I recommend having a look at the docs, i.e.
flashmediaserver_cs_asd.pdf to be found in your documentation
directory.
Similar Messages
-
Feature request: get bytes sent and received
Is there a way to get the number of bytes sent a received? For other stats, I use code such as:
com.tangosol.coherence.component.net.Cluster cluster = (com.tangosol.coherence.component.net.Cluster)
((SafeCluster)com.tangosol.net.CacheFactory.ensureCluster()).getCluster();
PacketPublisher publisher = cluster.getPublisher();
PacketReceiver receiver = cluster.getReceiver();So, I'm looking for a way to get bytes transferred info out of the publisher and receiver objects.
Thanks,
MattMatt,
First, I'd like to underscore the fact that all this is not a public API yet and may change without notice.
Currently, you can get the number of sent and recieved packets:
publisher.getStatsSent();
receiver.getStatsReceived();To transalte this into bytes you'd have to factor it by the value of "cluster-config/packet-publisher/packet-size/preferred-length" element in "tangosol-coherence.xml" descriptor.
Gene -
Can anyone tell me what is "publish and subscribe model"?
hi experts:
can anyone tell me what is "publish and subscribe model" in detail?
many thanksPublish-Subscribe Model
Purpose
This model defines how you publish messages to and receive messages from a well-known node. Such nodes are referred to as topics. You can use the model for:
· Creating Message Producer to a Topic
· Creating Message Consumer to a Topic
· Managing Durable Subscriptions
Chk this for more.
http://help.sap.com/saphelp_nw04/helpdata/en/aa/34518672fa44c79340c1f61556443e/frameset.htm -
(RFC vs files), where Sender SAP and receiver multiple system
Publish and Subscribe using BPM or Without BPM (RFC vs files), where Sender SAP and receivers multiple system,.
This is my 1st BPM scenario in sandbox system
For this scenario
I Created 2 Data types
2 MT,
Service interface:
Request interface Mode:Asynchronous
Abstract Req interface,Mode:Asynchronous
Response Interface,Mode:Asynchronous
Abstract Respomse Interface ,Mode:Aysnchronous
Synchronous Interface ,Mode:Synchronous
2 Message mapping for Req and Resp
1 Operation Mapping
BPM design: Plz find the attatchement
Can anyone please help me how many Interface determinations,receiver determinations ,sender agreements,receiver agreements need to create for this.......
It will be good if anyone send the BPM design flow for this.........
can we do this scenario without BPM?
Regards
A.Muni kumar
Edited by: Muni 1234 on Jan 31, 2012 10:24 AMHi
Receiver is FTP only.....
SAP side is RFC.........
RFC sender will be initiating the scenario, and there is receiver is File, PI should go to file directory and take the file then send it back to RFC as response.
Sender: RFC
Receiver: File
1. is this scenario with condition based routing.. so that each time outof many receiver systems it will trigger any specific system.
if above is the case then you can achive this without BPM also..
Yes...its condition based routing...
I Used async in this scenario.....sender side configurations also done....
But when when I am triggering BAPI from SE37 I am getting an error
Exception SYSTEM_FAILURE
Message ID: 00 Message number: 341
Message:
Runtime error CALL_FUNCTION_NOT_FOUND has occurred
How to Solve this????
I checked the RFC destination which i created in TCP/IP..a nd i mentioned the same in se37 RFC target system..
Connection is Ok
Or we need to create proxy for MI and report for this?
Edited by: Muni 1234 on Feb 1, 2012 8:38 AM -
I can not publish and query services in Registry Server?Help please!
I want to use Registry Server in Jwsdp1.5 to publish and query services,but there is some problems:
2006-4-26 10:05:26 com.sun.registry_server.server.RegistryServerServlet init
����: NamingException: javax.naming.NameNotFoundException: Name org.xml.sax.driver is not bound in this Context
2006-4-26 10:05:27 com.sun.xml.messaging.saaj.soap.MessageImpl identifyContentType
����: SAAJ0537: ������������������������������������ SOAP ����
2006-4-26 10:05:27 com.sun.xml.messaging.saaj.soap.MessageImpl <init>
����: SAAJ0535: ��������������
javax.xml.registry.JAXRException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
at com.sun.xml.registry.uddi.RegistryServiceImpl.jaxmSend(Unknown Source)
at com.sun.xml.registry.uddi.RegistryServiceImpl.send(Unknown Source)
at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
at com.sun.xml.registry.uddi.UDDIMapper.findOrganizations(Unknown Source)
at com.sun.xml.registry.uddi.BusinessQueryManagerImpl.findOrganizations(Unknown Source)
at QueryByName.doPost(QueryByName.java:63)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:127)
... 34 more
Caused by: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:121)
... 34 more
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
at com.sun.xml.messaging.saaj.soap.MessageImpl.<init>(MessageImpl.java:231)
at com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl.<init>(Message1_1Impl.java:43)
at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl.createMessage(SOAPMessageFactory1_1Impl.java:32)
at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:354)
at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:150)
... 36 more
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Invalid Content-Type:text/html. Is this an error message instead of a SOAP response?
at com.sun.xml.messaging.saaj.soap.MessageImpl.identifyContentType(MessageImpl.java:295)
at com.sun.xml.messaging.saaj.soap.MessageImpl.<init>(MessageImpl.java:146)
... 40 more
can you help me?expectiong your advise!thank youI have created my own private registry, I hava installed JWSDP1.5.
I use a .jsp file and a servlet to publish services,the servlet is:
import javax.xml.registry.*;
import javax.xml.registry.infomodel.*;
import java.net.*;
import java.security.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Publish extends HttpServlet{
public void doGet(HttpServletRequest request,HttpServletResponse response)
throws ServletException,IOException{
doPost(request,response);
public void doPost(HttpServletRequest request,HttpServletResponse response)throws ServletException,IOException{
String userName=request.getParameter("username");
String authPassword=request.getParameter("password");
Connection connection = null;
RegistryService rs=null;
BusinessLifeCycleManager blcm=null;
BusinessQueryManager bqm = null;
Properties props=new Properties();
props.setProperty("javax.xml.registry.queryManagerURL","http://localhost:8080/RegistryServer");
props.setProperty("javax.xml.registry.lifeCycleManagerURL","http://localhost:8080/RegistryServer");
props.setProperty("javax.xml.registry.factoryClass","com.sun.xml.registry.uddi.ConnectionFactoryImpl");
//props.setProperty("com.sun.xml.registry.http.proxyHost",httpHost);
//props.setProperty("com.sun.xml.registry.http.proxyPort",httpPort);
// props.setProperty("com.sun.xml.registry.https.proxyHost",httpsHost);
// props.setProperty("com.sun.xml.registry.https.proxyPort",httpsPort);
try{
// Create the connection, passing it the
// configuration properties
ConnectionFactory factory =
ConnectionFactory.newInstance();
factory.setProperties(props);
connection=factory.createConnection();
PrintWriter out=response.getWriter();
out.println("<a href=\"/publishapp/publish.jsp\">You can click here to be Back </a>");
out.println("<H3>Created connection to registry</H3>");
rs=connection.getRegistryService();
blcm = rs.getBusinessLifeCycleManager();
bqm = rs.getBusinessQueryManager();
//out.println("Got registry service, query " +"manager, and life cycle manager");
// Get authorization from the registry
PasswordAuthentication passwdAuth =
new PasswordAuthentication(userName,authPassword.toCharArray());
Set creds = new HashSet();
creds.add(passwdAuth);
connection.setCredentials(creds);
out.println("<br>");
out.println("<H3>Established security credentials</H3>");
//receive organization name and description
String orgName=request.getParameter("orgname");
String orgDescription=request.getParameter("orgdescription");
// Create organization name and description
Organization org =
blcm.createOrganization(orgName);
InternationalString s =
blcm.createInternationalString(orgDescription);
org.setDescription(s);
//receive contactor name phone and Email
String contactName=request.getParameter("contactname");
String contactPhone=request.getParameter("contactphone");
String contactEmail=request.getParameter("contactemail");
// Create primary contact, set name
User primaryContact = blcm.createUser();
PersonName pName =
blcm.createPersonName(contactName);
primaryContact.setPersonName(pName);
// Set primary contact phone number
TelephoneNumber tNum = blcm.createTelephoneNumber();
tNum.setNumber(contactPhone);
Collection phoneNums = new ArrayList();
phoneNums.add(tNum);
primaryContact.setTelephoneNumbers(phoneNums);
// Set primary contact email address
EmailAddress emailAddress =blcm.createEmailAddress(contactEmail);
Collection emailAddresses = new ArrayList();
emailAddresses.add(emailAddress);
primaryContact.setEmailAddresses(emailAddresses);
// Set primary contact for organization
org.setPrimaryContact(primaryContact);
String serviceName=request.getParameter("servicename");
String serviceDescription=request.getParameter("servicedescription");
String serviceURL=request.getParameter("serviceurl");
String svcbindDescription=request.getParameter("svcbinddescription");
// Create services and service
Collection services = new ArrayList();
Service service =
blcm.createService(serviceName);
InternationalString is =
blcm.createInternationalString(serviceDescription);
service.setDescription(is);
// Create service bindings
Collection serviceBindings = new ArrayList();
ServiceBinding binding = blcm.createServiceBinding();
is = blcm.createInternationalString(svcbindDescription);
binding.setDescription(is);
// allow us to publish a fictitious URL without an error
binding.setValidateURI(false);
binding.setAccessURI(serviceURL);
serviceBindings.add(binding);
// Add service bindings to service
service.addServiceBindings(serviceBindings);
// Add service to services, then add services to organization
services.add(service);
org.addServices(services);
//receive Classification scheme name and value
String classificationScheme=request.getParameter("classificationscheme");
String classificationName=request.getParameter("classificationname");
String classificationValue=request.getParameter("classificationvalue");
// Set classification scheme to NAICS
ClassificationScheme cScheme =
bqm.findClassificationSchemeByName(null, classificationScheme);
// Create and add classification
Classification classification = blcm.createClassification(cScheme,
classificationName,classificationValue);
Collection classifications = new ArrayList();
classifications.add(classification);
org.addClassifications(classifications);
// Add organization and submit to registry
// Retrieve key if successful
Collection orgs = new ArrayList();
orgs.add(org);
BulkResponse response1 = blcm.saveOrganizations(orgs);
Collection exceptions = response1.getExceptions();
if (exceptions == null) {
out.println("<br>");
out.println("<H3>Service Registering is Sucessful!</H3>");
out.println("<br>");
out.println("<H3>service information saved is</H3>");
out.println("<H3>");
out.println(orgName);
out.println("</H3>");
Collection keys = response1.getCollection();
Iterator keyIter = keys.iterator();
if (keyIter.hasNext()) {
javax.xml.registry.infomodel.Key orgKey =
(javax.xml.registry.infomodel.Key) keyIter.next();
String id = orgKey.getId();
out.println("<H3>service key is </H3>");
out.println("<H3>");
out.println(id);
out.println("</H3>");
} else {
Iterator excIter = exceptions.iterator();
Exception exception = null;
while (excIter.hasNext()) {
exception = (Exception) excIter.next();
System.err.println("Exception on save: " +
exception.toString());
} catch (Exception e) {
e.printStackTrace();}
the exception in the tomcat50-jwsdp/logs:
javax.xml.registry.JAXRException: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
at com.sun.xml.registry.uddi.UDDIMapper.getAuthorizationToken(Unknown Source)
at com.sun.xml.registry.uddi.ConnectionImpl.setCredentials(Unknown Source)
at Publish.doPost(Publish.java:66)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
at com.sun.xml.registry.common.util.MarshallerUtil.jaxbMarshalObject(Unknown Source)
... 32 more
expecting yours advise, thanks!! -
My in-built Hp webcam broadcasts upside down. It is in a Hp pavillion dv9500 laptop, running windows vista. I believe it started when I upgraded to version 10, but cant re install version 9 to check. Does anyone have any ideas?
Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try the following settings to check when Yoga is in Tent mode
Open Skype, click on tools, and go to Options, Left panel click on Video Settings
Select Camera as integrated, Click on webcam settings, Click on Camera control tab
Here you can change the values of tilt , Pan to check
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español -
UDP Send and Receive with Remote Host Only Issue
I am seeing an issue using the UDP Sender and UDP Receiver example VIs that ship with LabVIEW. If I open the VIs and do not change any of the settings and run the UDP Receiver VI and then the UDP Sender VI the Receiver VI never reads anything. However if I change the boolean on the UDP Sender VI to broadcast it works fine.
The example program by default uses localhost so I have also tried to use the UDP Receiver on my Real Time controller and the UDP Sender on my laptop with the boolean set to remote host only and the remote host string set to the ip address of my real time controller and this did not work either. But if I change the boolean to broadcast it works.
I would like to be able to send to a remote host only and not have to broadcast my UDP message to everyone.
Please let me know if you have any suggestions.
Thanks,
Russell
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional InstructorElizabeth,
Thank you for the response. I am using LV 8.2.1 and wasn't seeing any errors.
However I am not seeing the issue today, I must have been an issue with our network yesterday.
Thank you,
Russell
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional Instructor -
Is Publish and Subscribe part of MobileMe?
I know I will be able to sync to other devices with my iPhone, iCal and MobileMe but I want other PEOPLE to see my calendars like I do right now with iCal using Publish and Subscribe.
So my questions is; will I be still able to Publish and Subscribe with MobileMe?
Oh, the calendars must be password protected as the notes will contain confidential company information.Publish-Subscribe Model
Purpose
This model defines how you publish messages to and receive messages from a well-known node. Such nodes are referred to as topics. You can use the model for:
· Creating Message Producer to a Topic
· Creating Message Consumer to a Topic
· Managing Durable Subscriptions
Chk this for more.
http://help.sap.com/saphelp_nw04/helpdata/en/aa/34518672fa44c79340c1f61556443e/frameset.htm -
Calendar Publishing and URL's?
I have a teacher that is wanting to use the published calendar feature to publish his class schedule and items he wishes to have the student to look at further or work on. I haven't been able to find a way to integrate his URL's into Calendar publishing so that the student can click on the links inside his calendar items and go directly to a web page he has listed. Is this possible?
Also the Supt would like to have a series of school calendars available to parents and staff to subscribe to. I have setup a group for Calendar publishing and assigned that group to the calendars already published. What is the best method for the end user to gain access to the calendars and be able to post items. I don't want just anyone being able to do so but would like to make it as easy as possible for the staff that are assigned to post items.
Is there any way to RSS feed the calendar events as well?
Thanks for the information.
Richardrhuhman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
NetStream publish and play synchronize buffers
NetStream publish and play synchronize buffers
I haven't tried to run your code, but something obvious is
the server-side code. It doesn't do anything.
When you publish a stream, you need to tell other client to
connect to it... manually. There are three thing to account for. A
client connecting needs to subscribe to all existing streams. A
client connecting needs to inform all existings clients that it has
published its stream and give them the stream name so they can
subscribe. The client needs to receive stream names of any new
(future) connecting clients so it can subscribe to their stream.
First you need to publish your stream... lets say this is
client A and publishes a stream named stream_A.
1. Then you need to send the stream name (stream_A) to all
other existing clients, so they can subscribe to it.
2. Then you need to receive the names of existing clients
streams, so the client can subscribe to them.
The logic in step 1, will handle any new clients connecting
in the future.
If anyone sees any errors in this or has a better method..
please feel free to add to it.... -
hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh. -
I Want To Transmit Audio from Mic and Video from WebCam on Another Computer. I have used AVTransmit2.java file and AVReceive2.java file for Transmission and Receiving but They Transmit Only Video On Another Computer on a network without any error. Any One Help me How Can i Transmit both Audio & Video at the Same time ????????
i m using This Command for Transmittion
java AVTransmit2 vfw://0 192.168.0.1 192.168.0.2 10000
and this Command For Receiving
java AVReceive2 192.168.0.1/10000 192.168.0.2/ 10002Excuse me foro my bad English but I speak English like Tarzan.
To trasmit both video and audio I created a MergingDataSource wich incorporates video and audio data sources. Then I created a Processor with this DataSource and a RTPManager for each track of the processor. It works.
Stupendoman -
Published and visible to all readers
Since we went live few weeks ago, I'm getting some weird messages on SP2010 Publishing site, every time someone sends a page for approval I see a blue bar with the message: "Status:
Published and visible to all readers", but the page is not approved, and the approvers cannot approve the pages. They just get an "Unpublish" button.
Also, from time to time I'm getting error messages saying I don't have access to the pages even tough I'm the administrator.
The funny part is that I don't have any issues when I access the site using the internal address http://myserver - It only happens accessing the domain name www.myserver.com wich works
just fine if I don't log in.
Also, I'm running 3 other public-facing sites and I don't have any issues on them. Page approval process works perfectly.
I've done my share of online searching and I cannot find any related issues. Is it AD? Is it the network or maybe a setting I missed on SP2010?
BTW, I'm running SP2010 with plenty of hard drive space and memory and no errors showing up in the logs.I still have the same issue.
The alternate mappings are correctly configured.
When I access the www.mysite.com I receive access denied. But when I access internal address http://sp2010 I have no issues.
For some reasons "Quick Deploy Items" list ID shows in the URL access denied page. When I refresh the access denied page another list ID shows in the URL which points to Pages list.
I've checked the Pages list permissions and I don't see any issues.
Another interesting fact is that when I access first www.mysite.com and try to log in I get access denied. And then I open another tab and access the same site but internally http://sp2010 which always works. Then I go back to www.mysite.com tab
and if I refresh it, I don't get access denied anymore. -
Telnet with TestStand (Send and Received data)
Hi,
I look for a long time a DLL allowing me to use the protocol via telnet TestStand for both : broadcast and received.
Today I found this DLL, which is free, it is part of a package extraputty.
I hope that this can help you.
extraputty.free.fr
Message Edited by Support on 02-04-2008 09:00 AMHi,
I have written a .NET Telnet Compenent for Teststand and it even works well.
Most of the code i have found at Codeproject.com .There is thread called TerminalControl.
You can use this with only a few modifications. The major task you have to do is to add
the TS stuff.
Greetings
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e= -
Open Qty and Received Qty for Open Purchase Order.
How to Fetch the open qty and received Qty of every Open purchase orders in EKPO table where ELIKZ = SPACE OR LOEKZ = SPACE. What are the table and field used? Kindly help me.
Hello Senthilramkumar,
Use ME2L/ME2N/ME2M with selection parameter WE101.
Hope this will help.
Maybe you are looking for
-
Hello, Any help on the following question will be most appreciated. I am looking at an FI document. In FAGLL03, I see a value of $257,656.29 for example, but in FBL5n is see a value of $86,277.20 for example not $257,656.29. The general ledger view a
-
How to get the fields in a display variant
Hello gurus, I have created variants for an ALV display that I can select on my selection. This works fine. Now I need to know during the execution of the program what are the fields that have been selected in the display variant so that I can export
-
How to default payment term from Site level
Hi All, When creating an Order, the payment terms are defaulting from the defined defaulting rules. As per the defaulting rules, it is supposed to pick as following seq.. 1 Related Record - Invoice To.Payment term 2 Related Record - Ship To.Payment t
-
Hello I experienced the "green screen" problem connecting a second monitor to a G5. I suppose it's a problem of wiring in the ADC-DVI adapter. Does somebody know how to hack the adapter to let the monitor get the right signal from red and blue channe
-
Web Questionnaire Error - uws_form_service
Hi experts, I am trying to open a vendor evaluation questionnaire after having pushed the 'Evaluate' button during a GR confirmation. The header page starts correctly (so I could see the 'Vendor Evaluation' title at the top) and then the following er