Publishing problem for v.10 and above - works fine in v.9

Hi,
I have this strange issue when I try to publish for v. 10 or above (which I need to get support for TLFTextFields). It works fine in v. 9. My Flash application runs, but there are two critical differences (making it unusable):
i) there is a complex vector (a geographical map, with each country or map area in a different color) which is either rendered as a bitmap and looks very blocky, or it does not display at all. Even when it is not visible, mouse-over events for each map area still trigger. This map should be displayed as a vector, and is displayed correctly in v. 9.
ii) the width no longer stretches to full-screen - but remains fixed width.
All I'm doing is publishing one version up - no other changes. It looks a bit as if I am publishing in AIR for iOS, but I'm not - I selected Flash Player 10.3 (or 11.1, 11.2, 11.3, 11.4 - all the same results).
I tried uninstalling and reinstalling Flash, deleting and restoring default preferences, copying the code into a whole new Flash file, removing TLFTextFields. Nothing has worked so far.
Many thanks for any advice!
Frank

Here is a list of deprecated elements of AS3.
Some classes that would work under Flash 9 wont work when targeting 10:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/deprecated.html
Maybe that gives You an idea, where the problem lies
This gives useful tips when using non-latin charctersets and swapping languages on the fly, that are loaded from xml files.
http://www.mikeziray.com/2009/10/19/dynamic-textfields-in-flash-as3-and-their-bugs/

Similar Messages

  • HT4157 I have a Verizon MiFi device I use as a WiFi for my Macbook and it works fine. I am trying to connect my i Pad to this wifi device and it just twirls around like it is unable to locate it. Wondering what I should do?

    I have a Verizon MiFi device that I use as a WiFi for my Macbook and it works great. I am trying to set up my new iPad to the same device for WiFi and it comes up as a selection but when I click on it all it does it twirl around and won't connect. Needing to know how to proceed to get it to connect? Thanks

    There are other things to try.
    Turn WiFi off on the iPad, restart it and then turn WiFi on again.
    Reset the network settings on the iPad. Settings>General>Reset>Reset Network Settings, that makes you have to start all over again.

  • I have had my Ipod touch 4th gen for 2+ years and was working fine until I upgraded to ios 6.1.3. Now I cannot play games and most of my apps keep crashing.

    My ipod was working just fine for the past 2 years and ever since upgrading to ios 6.1.3, i simply cannot play games or anymore such as Subway surfers, carrot fantasy, 4 pics 1 word, etc. I also noticed that i had 1.2 GB of free space on ios 5.1.1 but then decreased to 900+ MB after "upgrading" to ios 6.1.3. I then deleted one of my space-hungry apps (the sims freeplay) to clear up some space and now have 1.6 GB of free memory. Just a thought, could apple have purposely done this with their software update to actually make an older, phased-out product such as my ipod touch 4th gen work worse than it has in its  previous versions of softwares to force you to scrap it for a newer product?

    - Double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - iOS: Troubleshooting applications purchased from the App Store
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Downloaded Super iGoogle 3.0.0 for firefox (10.0.1) but does not work. Installed the same add on for google chrome and it works fine. Any suggestons? Win 7 64 bit.

    Super iGoogle for firefox not working

    Also please make sure that your Java plugins are up to date [[Troubleshoot issues with plugins like Flash or Java to fix common Firefox problems]]

  • Published Project for MAC (.app) and will not open external PDF files

    I have two captivate (7.x) projects that I published as Win .exe apps, and they work fine.  Published the same two projects as MAC (.app) and when I run the app on the iMac, and click a click box to open an external PDF, nothing happens. The PDFs are located in the "root" folder with the .app file.
    Any suggestions?
    Thanks!
    JackL
    Windows 7
    Adobe Captivate 7

    Thanks for the feedback. I was able to open some PDF files on Acrobat 5 that I recently scanned at a Fed Ex office with no issue whatsoever. I could extract pages, delete pages, etc, the software Acrobat 5 worked fine.
    What I wonder is there a way I can make a change to a PDF file that will then allow me to open it in Acrobat 5? I have a gut feeling there is an adjustment that I can make in Adobe Reader after opening it that will then make the file accessible in Acrobat 5. I am playing with it but no luck thus far.

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • HT5622 A month ago I dropped my iPhone in water and it works fine except for the signal  it always says "searching". Can you help with this problem?

    About a Month ago I dropped we went swimming and I dropped my iPhone in water and it works fine except at the top for the signal it says searching. Can you please help me with this problem?

    It's very likely that the phone is permanently damaged - water corrodes the very fine copper strips which form the circuitry very quickly - but only a service engineer can tell you what its condition is and whether it can be restored to health. If possible take it to an Apple Store (make an appointment) for a free assessment. Don't be surprised if you are told you will have to replace it.

  • HT204416 My Safari is no longer working with many sites.  However Chrome and Firefox work fine.  I would like to re-install Safari in an effort to clear up the problem I can not resolve.

    My Safari is no longer working with many sites.  However Chrome and Firefox work fine.  I would like to re-install Safari in an effort to clear up the problem I can not resolve.

    1. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    2. Select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Test.
    3. If the above steps don't resolve the problem, please describe it in more detail.

  • Hi, I have a problem with my Epson Stylus NX420. I had it connected and it worked fine but then all of a sudden it just stopped. It said it was offline, but it wasn't. So I tried to reinstall the printer, so i deleted it and clicked the   button to add

    Hi, I have a problem with my Epson Stylus NX420. I had it connected to my computer, and it worked fine. But I preformed a remodel and before the printer was connected to a windows desktop, and now it is not. I don't know if this could the be the cause of the problem. But I tried to print something and it showed me the printer as offline, but it wasn't. Thus to try to fix this, as I have done before I deleted the printer and tried to add it again. But as I went to add it, the printer was not there. I have searched the internet for an answer and I have found nothing. I do not understand why this has happened, nor how to fix it. Please help me.

    Because you had the printer connected to Windows, the print queue on your Mac was for this connection. With you moving the printer away from the Windows computer, the print queue on the Mac will no longer work and will show offline. So for the new connection of the printer you have to create a new print queue.
    Now the question is; how is the printer connected to the Mac. If it is connected by USB to the Mac then it should appear in the Default Add Printer view. If it is connected to the Mac via some other method, then could you reply with how it is connected.
    If it is connected to the Mac by USB then the most likely cause for the printer not appearing in the Default Add Printer view is thenUSB printer cable. So try disconnecting it and reconnecting it or even try another USB printer cable.

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezinginsending

    On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezing problem while it sends

    See:
    iOS: Troubleshooting Messages
    However, I suspect it is just a tempery network problem beyond your control

  • I m trying to send a email and sms alert using php and it works fine on all systems except on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india. plz help

    I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
    the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
    $headers = "MIME-Version: 1.0\n" ;
                $headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
                $headers .= "X-Priority: 1 (Highest)\n";
                $headers .= "X-MSMail-Priority: High\n";
                $headers .= "Importance: High\n";
                // Additional headers
                $headers .= 'From: Rakesh <[email protected]>' . "\r\n";
                foreach($disemail as $email)
                    $to = $email;
                    $subject = $succMessage['email_subject'];
                    $message = $smsText;
                    mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
            if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
            $smsText = utf8_encode($smsText);

    i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
    would like to have your thoughts though.
    $headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n  format=flowed Content-Transfer-Encoding: quoted-printable";

  • HT202157 I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the m

    I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the main page

    StagLemoore wrote:
    Thank you everyone for your suggestions and help.  Ended up logging out of my apple ID account.  Of note, when I did I did a quick test and checked out both the movies and tv show options, and it all worked perfectly.  I then logged back in, and now all my purchased and rentals are available which makes sense.  I guess with the update there was some weird bit of trons that required one to log out then back in.  Probably doing a rest in between may not hurt for some.  Thanks again for all the assistance. Cheers.
    It looks like there is a Apple doc for this problem here -> Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating

  • My iPhone 5 doesn't send any text messages or i messages and the problem isn't with the sim card as i tried it with another iPhone 5 and it worked fine.

    my iPhone 5 doesn't send any text messages or i messages and the problem isn't with the sim card as i tried it with another iPhone 5 and it worked fine.

    OK. Thanks for sharing.
    Have a nice day.

  • TS1398 My new IPad mini has poor wifi reception. Goes in and out.  My IPod, IPhone, Ipad1 and Ipad2 work finer. I think it has wifi antenna issues.  Does anyone else have this problem?

    My new IPad mini has poor wifi reception. It goes in and out.  My IPod, Iphone4, Ipad1 and Ipad2 work fine. What can I do?  Does anyone else have this problem?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

Maybe you are looking for