Publishing  Site

I just need to know where to go in Dreamweaver to FTP my
site. I can't find it anywhere!

F1 Help - > FTP
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Baxter" <baxter(RemoveThe :-)@gtlakes.com> wrote in
message
news:fp2jna$5ac$[email protected]..
> If you have your site set up correctly just select your
site folder and
> click the put button.
> Dave
> "terrikwarren" <[email protected]>
wrote in message
> news:fp2j70$4on$[email protected]..
>> I just need to know where to go in Dreamweaver to
FTP my site. I can't
> find it anywhere!
>
>

Similar Messages

  • Why is my published site not operational when using Firefox or IE?

    The original problem I experienced had to do with the fact that my published site's navigation bar was totally missing on each page and replaced with a "period" as described by the following thread... http://discussions.apple.com/thread.jspa?messageID=9899999&#9899999
    The weird thing is that this problem only exists when using IE or Firefox on a PC (at work). Site is 100% operational using Safari on a Mac (at home).
    Thinking my iWeb files were corrupt, I uninstalled and reinstalled iWeb '08. After doing so, I republished my site. The good news: the nav bar is now present on each page and operational. The bad news: my photo pages and blog page have zero content other than the header banner and nav bar. Again, this problem only exists when accessing the published site using IE or Firefox on a PC. The site is fully operational and all photos/blog entries present when accessing the site using Safari on my Mac.
    What gives? Did a recent iWeb update (intended for iWeb 09 users or intel-based macs) corrupt my iWeb '08 on my PowerBook G4?

    Please note that Java and Javascript are not related. iWeb uses a lot
    of Javascript, not Java. There may be some issues with the Javascript
    generated by iWeb -- I don't know. If it seems to work for someone
    and not for someone else then it is an issue at the browser end, not
    the website end. Each browser may not be handling the Javascript in
    exactly the same way. (You gotta love standards.)
    Dave

  • Can't publish site

    Greetings People,
    Is there an any server updating occurring?
    I keep getting this error message when trying to publish site. Please advise. Thank you.

    Hi Robert,
    That means when in your home network, Muse is not allowed to make connection with the servers at business catalyst. Please check your firewall and make sure nothing is blocking Muse. Was this working before?
    - Abhishek Maurya

  • How do i add to a published site?

    i am defeated...
    how do i access an iWeb site i have published to add another page? i launched iWeb and the "visit a published site" is grayed out. i can only find my site by clicking on the link in an e-mail i sent announcing it, and then i am only viewing it as anybody else would. i would like to know if i can build upon or edit a published site. and where is the link to .mac on the new apple site?
    thanks

    thank you for the quick response. i erased and my drive and re-installed almost everything in the hopes of rectifying an ongoing and annoying problem and i don't have the AppSupport>iweb pathway available to me. how do i find a link to log onto .mac when i re-publish this my iWeb site to .mac?

  • After I publish IWeb, unwanted hyperlinks show up in the published site.   How do I get rid of this worm?

    I have noticed that no matter how hard I try to rid my published site of these hyperlinks (that I've never put in) certain words within the published site are highlighted and underlined and link to another source trying to sell something.  I've never put this in and think there is some kind of virus or worm on my Macbook Pro with Mountain Lion.  I've even deleted pages and started from scratch with a new page.  They are still showing up and multiplying.  HELP!  I'm on a Windows computer right now and don't know how to take a screen shot to show you how it works.  I hope my description is enough.

    This has nothing to do with iWeb. These links are added on the server- probably due to the fact that you are using a "free" hosting service.
    Contact your host to upgrade your account or choose another one with more appropriate facilities...
    http://www.iwebformusicians.com/iWeb/Website-Hosting.html

  • Media Tab Missing in Publishing Site

    Hello
    I have a Publishing site created with the Publishing template. I edit the default.aspx page of the site and click 'Add a Web Part', I then select Media and Content and pick the Media Web Part. I then edit the web part, but I don't see the 'Media Tab' in
    the ribbon.
    I tried creating a new page but it still didn't show.
    Does anyone have any ideas why this is not working?
    Thanks for any suggestions.
    Yoshi

    Hi Yoshi,
    I tried reproducing the issue in my SharePoint Server 2013 by creating a site collection of Publishing Portal. Then I created a new page, and inserted a media web part. When I click on the web part, WER PART tab and MEDIA tab were both shown in the ribbon.
    Then I tried any possible reason, I deactivated publishing feature in site feature, then the media tab still existed. After I deactivated the publishing feature in site collection feature. The media tab disappeared and all ribbons in WEB PART tab greyed
    out.
    I’d recommend you check the if publishing feature is activated in site collection feature and site feature. Could you edit this media web part properties? Did the issue occur in other site collection with publishing feature activated? Did the issue occur
    with admin permission?
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Setting Custom Master page in search results page - Publishing site

    Hi,
    I have a publishing site, in which i have a custom Master page.
    However when doing the search in the site, the search results does not show the custom Master page.
    Is it possible to set the custom created Master page for the search results page? How to achieve this?
    Thanks

    Hi Venkat,
    The search page for a publishing site is a file available in the layouts folder (I believe it is the osssearchresults.aspx if you see the address bar). It is used by all web applications and site collections in your farm. So ideally you should not change
    it. I mean you can change it to point to your master page but it is bad practice ..
    I would instead do the following
    1. Create a custom search results web part page and place it in the site collection itself (one of the document libraries)
    2. Custom search results is not difficult because all search results pages are made of a set of Out of the box search results web parts. If you add the same webparts to your page as the default search results page, you have effectively created a copy of
    it
    3. go to site settings --> search settings and change the search results page to your newly created page
    4. The newly created page by virtue of its location will automatically use the master page the rest of the site uses.
    I could not spend the time to try the above for you but I am sure the above will work.
    Thanks and Regards,
    Partha
    AvePoint

  • Custom master page applying on Publishing site template not in my site template?

    Hi,
    i have created a custom master page based on Publishing template Using Design manager (means converted html to aspx page) and then set all other control on the master page. now problem is master page applying only on Publishing site template not my site
    template. any one know why its happening, and how can resolve this issue?
    Thanks
    Mohammad

    Feature Stapling may be a solution - Please check -
    http://sharepointologic.blogspot.in/2013/04/branding-sharepoint-2013-my-sites-with.html
    http://www.codeproject.com/Articles/42129/Creating-branded-my-site-in-sharepoint
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Publish site changes edits every folder in "entries" directory

    I utilize Lytebox slideshows in my blog entries and have an issue with MobileMe erasing the necessary Lytebox files from every blog Entries directory (Web/Sites/Site Name/Site Name/Entires/Year/Month).
    I always update my website via Files>Publish Site Changes. I publish to MobileMe so that I can make my site private.
    I expect MobileMe to overwrite the files in the Entries folder for the specific blog entry I have created/changed, but why are the Lytebox files erased from every single Entries folder? I just did a test by making a minor change to a blog entry, publishing site changes and then using Cyberduck to check the Entries directory. Sure enough, every folder in that directory was modified.
    As a result, every time I make any changes to my website, I have to upload the Lytebox files to every Entries folder, currently I have 15 of them.
    Any reason MobileMe is doing this? Can I avoid this from happening? If not, I'll post another question about how to quickly and automatically upload the lytebox files to every Entries folder.
    Thank you.

    Any 3rd party files/folders used for java based slideshows in an iWeb site should be placed in the iDisk/Web/Sites folder and linked to there and NOT in the site's folder itself for the very reason you're experiencing. That is, they get deleted when the site is republished. It's the nature of iWeb.
    You should use the following URL to link to a particular file in the Lytebox folder (assuming that folder is named Lytebox): http://web.me.com/MobileMeAccount_Name/Lytebox/Filename.
    OT

  • Can't open a published site.  Please Help.

    I am currently using iWeb 08 v 2.0.4
    Whenever I would open the app, my web site would always be there. Recently however I got the template page, to start a new site. So I went to file>visit published site, but it was grayed out.
    All the files and folders as well as the index are there, but I cannot for the life of me figure out how to open my site to make changes and re-publish. I have been using iWeb for years and never had this problem. I am stumped.
    Any thoughts?

    I get a blank project page.
    But, the good news is that I saw the file was a 'domain' file, so I did a search for that and saw the other project somewhere else on my drive, clicked on it, and it's all there.
    Thanks
    Jim

  • Publish Site Changes Grayed Out

    I'm having trouble publishing new pages to my website. Previously when I clicked on "Publish" the pages went directly to my MobileMe/iDisk account. iWeb would then ask if I wanted to tell others and/or go to the site. Now it tells me that my pages have been published to the "selected folder." I believe the problem stems from my installation of Webcrusher. Since my pages have a lot of images I want to do all I can to secure rapid loading of the pages and Webcrusher seemed a good solution. But I think it configured iWeb to load the pages to the "selected file". I have found the "selected file" and it did contain the new pages. So did my domain file in the standard iWeb folder in the Library Directory.
    So, I want to get back to iWeb publishing directly to MobileMe but the Publish Site Changes button is grayed out. I have taken the following actions to reactivate the button: uninstalled Webcrusher (using Clean App), deleted the preferences file, rebooted (numerous times), reinstalled iLife '09, and tried launching iWeb by clicking directly on the domain file. Button is still gray.
    I know that I have the option of using an FTP or even dragging the pages to iDisk (although that part confuses me since I can't really seem to find the "pages" just all of the bits and pieces of same) but I would really like to have the simplicity of my iWeb back.
    All help appreciated.

    What is it you want to do at this time? If you want to start publishing directly to MMe the click on the site folder in iWeb and change the setting to Publish to MobileMe:
    Click to view full size
    If you want to continue using WebCrusher this might be of some help: Old Toad's Tutorial #2 - Uploading only those published new or newly edited files when using a 3rd party FTP client.
    OT

  • How come my comments are visible in iweb but not on published site?

    I published my site (after many frustrating attempts and publish errors) and had allowed comments. I made a blog entry and published to .mac and found out from a friend that that particular entry didn't have an option to add a comment. I tried to republish many times - I don't know how it happened but the comment option showed up eventually. I had the same thing happen again today so I tried publishing again but this time I tried publishing to a folder. Not sure if this caused the problem but now one comment on the blog disappeared and the rest are only visible in iweb and not on the published site - on the published site there isn't an opportunity to add comments where they used to be. Can I get the comments back on my site?
    Thank you for any help.
    MacBook   Mac OS X (10.4.10)  

    Oh, rats. Do I need to remove the folder that I published to? I'm not even sure where to find it. I have republished successfully with the comments still in iweb but they don't show up on-line. I'd really like to get them back on if possible.

  • Google map widget does not show up in published site. Any suggestions?

    After I've dragged the google map widget onto my page and publish it, it does not show up in the published site. Any suggestions?

    Try publishing to a local folder and double clicking the index.html file to launch your site in the browser direct from your hard disk to see if the map works.
    Where are you publishing to - MobileMe or another server?

  • Publishing site with Workflow not working properly

    Hello All
    I have created a Publishing Site Collection on SharePoint 2013 on-premises and when I create a new sub-site using the "Publishing site with Workflow" template, I get redirected to
    the site home page and I get the option to PUBLISH the page. But, when I try to publish the page, I get a server error. Now, instead of trying to publish the page, if I refresh the page I this time get an option to check-in the page, after checking the page
    in, i get the option to publish it, now I can publish the page without any error. This does not happen on my DEV server, but only on QA. I am using the "Publishing site with Workflow" template,
    which associates an OOB Page Approval workflow with the Pages Library.
    Please help me guys!
    Parth

    Hi Parth,
    Based on your description, you encountered the issue with Publishing site with worklfow site template.
    Please provide more detail information about error returned, and see if there is related error message in ULS log.
    Could you please recreate a new site on DEV server to see if the issue still occurs?
    I wonder if there is difference on Workflow related settings between DEV server and QA server.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Placeholder not visible in custom page layout - publishing site

    Hi,
    I have a custom page layout in publishing site.
    I had added a new textbox to the existing page layout as below:
    <tr id="trCustomContent2">
    <td id="tdCustomContent" style="padding-top:5px;">
    <div id="divCustomContent" style="padding-left:6px !important;vertical-align:top; width:450px;" >
    <h3>
    <PageFieldTextField:TextField ID="TextField1" FieldName="fec9f0d3-77a3-4afc-99d3-99d2cb745d2c" runat="server" >
    </PageFieldTextField:TextField></h3>
    </div>
    </td>
    </tr>
    I deployed the changes, but in the edit mode of the page, i am not able to see the page layout.
    This issue is happening when a subsite is created. For the existing sites, the textbox is getting shown.
    How to fix this?
    Thanks

    Hi Venkatzeus,
    For each page layout, it has associated with a content type.
    You can click into the content type in site content types under Web Designer Galleries in root site settings.
    And then click Add from new site column to create and add the new site column to this content type.
    After that you can add this column to the page layout(.aspx page for the page layout) with the code below(you need to change the fieldname value to the corresponding GUID of the column):
    <div>
    <Publishing:EditModePanel runat="server" CssClass="edit-mode-panel">
    <PageFieldTextField:TextField ID="TextField1" FieldName="6bf50814-27d1-4b36-9980-c702c25080d7" runat="server">
    </PageFieldTextField:TextField>
    </Publishing:EditModePanel>
    </div>
    Best regards.
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Published Site Does Not Match Design File

    I've published a website but it does not match the design file.  It's showing an older version that has since been changed and not sure why it's picking up something I've updated and saved over many times.  Thanks for any and all help.

    And now I'm seeing a problem of a similar nature.  The design and preview show a smooth transition between all pages, but the published site shows the logo in the upper left "jumping" when I leave the home page.  I've checked the page properties between all of the pages and they seem to be set the same.  I am using only one master page for all of the pages.  Any ideas on why this would be occurring?  The website is jacksoncompany.net.

Maybe you are looking for