Media Tab Missing in Publishing Site

Hello
I have a Publishing site created with the Publishing template. I edit the default.aspx page of the site and click 'Add a Web Part', I then select Media and Content and pick the Media Web Part. I then edit the web part, but I don't see the 'Media Tab' in
the ribbon.
I tried creating a new page but it still didn't show.
Does anyone have any ideas why this is not working?
Thanks for any suggestions.
Yoshi

Hi Yoshi,
I tried reproducing the issue in my SharePoint Server 2013 by creating a site collection of Publishing Portal. Then I created a new page, and inserted a media web part. When I click on the web part, WER PART tab and MEDIA tab were both shown in the ribbon.
Then I tried any possible reason, I deactivated publishing feature in site feature, then the media tab still existed. After I deactivated the publishing feature in site collection feature. The media tab disappeared and all ribbons in WEB PART tab greyed
out.
I’d recommend you check the if publishing feature is activated in site collection feature and site feature. Could you edit this media web part properties? Did the issue occur in other site collection with publishing feature activated? Did the issue occur
with admin permission?
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

  • Custom tab missing from Create Site template selection section in SharePoint 2010

    Background:I migrated from SP 2007 to SP 2010.
    ISSUE: my custom templates are visible in the Gallery list but when i try to create a new site the Custom tab selection is missing.
    What am i doing wrong?

    Hi,
    For a tip to understand for Visual Upgrade refer here :
    Visual Upgrade
    By Custom Templates, I mean remove old Master Pages : Go To Site Settings --> Look And Feel --> Master Pages (click on Master Pages to open window with Master Pages and CSS Style). From this page select V4Maste.master and default CSS. Refer here for
    more on how to change :
    Master Page  
    You can very well get back all your custom settings, but first lets try to resolve your first issue.
    Cheers!

  • Missing "Save Site as Template" For Publishing Sites in Project online 2013

    First I created Sub site using Project Template under the site collection.
    Now I want to this Sub site Save as a Site Template. When I went for Save site as Template in site setting. Under Site Action there is no option for “Save site as Template”
    marylu

    "Publishing Feature" may be enabled at your site , The Publishing feature does not support the Save Site as Template option.
    http://support.microsoft.com/kb/2492356
    Some workaround -
    http://www.learningsharepoint.com/2013/05/03/missing-save-site-as-template-for-publishing-sites-in-sharepoint-2013/
    http://blogs.msdn.com/b/how24/archive/2013/06/13/save-publishing-site-as-a-template.aspx
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Publishing Site Template Missing - MOSS 2007

    Hi All,
    I can't see the "Publishing Site" template in the list while creating a site/site collection. The publishing feature is activated in both site collection level and site level. I can see only "Publishing Site with Workflow" and "News
    site" under "Publishing" tab.
    I have checked in "Page Layouts and Site Templates" settings page and there also "Publishing Site" template is not listed.
    Any help is highly appreciated.
    Puli Bala

    Hello Puli,
    Check from site settings page. go to Site Settings –> ‘Page layouts and site templates’ under ‘Look and Feel’ section.  On the ‘Page Layout and Site Template Settings’ page, you can specify which site templates will be available for creating subsites
    in this site collection.
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

    My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

    What are the settings for clearing history when Firefox closes?
    Make sure that you do not clear the Browsing Cache as that will remove the thumbnails that are stored in it.

  • Admin tab missing in BI Publisher 10.1.3.4.1 in windows xp 32 bit

    Folks,
    I am unable to see the Admin tab in BI Publisher 10.1.3.4.1 in windows xp 32 bit. I am trying to login from OBIEE --> More products --> Bi Publisher.
    If I try to reinstall BI publisher desktop It says you have already installed. All my OBIEE stuff works fine. I went through the link
    http://oraclebizint.wordpress.com/2007/11/06/oracle-bi-publisher-and-bi-ee-invisible-admin-tab/
    *I looked at my {OracleBI}\xmlp\XMLP\Admin\Configuration\xmlp-server-config.xml file.*
    I don't have the SUPERUSER_PASSWORD and SUPERUSER_USERNAME lines.
    my security model says as below.
    *<property name="SECURITY_MODEL" value="BI_SERVER"/>*
    I tied changing to <property name="SECURITY_MODEL" value="XDO"/> Nothing happens...!
    *{OracleBI}\xmlp\XMLP\Admin\Security\principals.xml*
    -- checked for Administrator Role mapping is enabled.
    *{oc4j_bi}\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\xmlp-server-config.xml*
    -- Iit points to the XMLP Reports path
    Also went through link http://forums.oracle.com/forums/thread.jspa?threadID=582633&start=0&tstart=60
    Still nothing happens...!
    How do I get the Admin tab in the BI publisher? Somebody help..

    I was able to navigate within Admin tab. But, when I try to add any new jdbc data source or modify the demo data source's connection string the screen hangs. I have to kill the screen using alt+ctl+del from the task manager window.
    Also, I can't access BI Publisher from MS word. When I try to login from Word It asks for report server. In the tutorial it says that we can access BI publisher only if BI desktop is successfully installed.
    What is going on here? Somebody help me in setting up the JDBC data source.

  • Graphics missing from numerous sites. text boxes only

    On many sites. eg ebay. Nottingham tram times. Rail journey planner. All graphics are missing. Leaving basic text against large white blank areas.

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong
    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Why is my published site not operational when using Firefox or IE?

    The original problem I experienced had to do with the fact that my published site's navigation bar was totally missing on each page and replaced with a "period" as described by the following thread... http://discussions.apple.com/thread.jspa?messageID=9899999&#9899999
    The weird thing is that this problem only exists when using IE or Firefox on a PC (at work). Site is 100% operational using Safari on a Mac (at home).
    Thinking my iWeb files were corrupt, I uninstalled and reinstalled iWeb '08. After doing so, I republished my site. The good news: the nav bar is now present on each page and operational. The bad news: my photo pages and blog page have zero content other than the header banner and nav bar. Again, this problem only exists when accessing the published site using IE or Firefox on a PC. The site is fully operational and all photos/blog entries present when accessing the site using Safari on my Mac.
    What gives? Did a recent iWeb update (intended for iWeb 09 users or intel-based macs) corrupt my iWeb '08 on my PowerBook G4?

    Please note that Java and Javascript are not related. iWeb uses a lot
    of Javascript, not Java. There may be some issues with the Javascript
    generated by iWeb -- I don't know. If it seems to work for someone
    and not for someone else then it is an issue at the browser end, not
    the website end. Each browser may not be handling the Javascript in
    exactly the same way. (You gotta love standards.)
    Dave

  • Design library (_catalogs) for Composed Looks is missing in the site

    Hi,
    Some of sites (subsites) in our O365 are missing design library in the _catalogs used for Composed Looks.
    How this library can be added after the fact, not sure what would be the reason for this library to be missing in the first place.
    Thanks
    Brano

    Hi Brano,
    How did you create the problematic subsites?
    Whether you created them using a  saved site template. If yes, you make sure that “Include Content” is selected when you save a site as a template.
    Please check whether SharePoint Server Publishing feature is enabled. If yes, deactivate it and activate it, compare the result.
    Here is a similar post for your reference:
    http://social.technet.microsoft.com/forums/sharepoint/en-US/16461c60-4831-44bd-af11-1f6d99e44ab6/composed-looks-change-the-look-themes-are-missing-when-creating-site-from-saved-template
    In addition, as this issue is related to Office 365, I suggest you create a new thread on Office 365 forum, more experts will assist you with Office 365.
    Office 365 forum:
    http://community.office365.com/en-us/f/default.aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Contacts details of customer at the Communication tab defined at the Site level in oracle AR

    Hi Expert,
       Please tell me that how I find out recently updated  Contacts details(Multiple contacts) of customer at the Communication tab defined at the Site level in oracle AR
    Thanks in advance.

    Hi Octavio,
    Thank you for sending me this query. I am working on Customer Interface in R11i. For updating the records I need to check already existing data for a particular customer in a particular site. I am getting all the details except the communication tab details.
    I am writing the below query but it is giving multiple rows and same data. Some phone numbers and email addresses are missing in the communication tab . Please correct me what mistake i am doing.
    SELECT hcp.email_address,
    ,hcp.phone_area_code
    ,hcp.phone_number
    ,hcp.phone_extension
    ,hcp.phone_line_type
    FROM ra_customers rc
    ,ra_addresses_all raa
    ,hz_party_relationships hpr
    ,hz_contact_points hcp
    WHERE rc.party_id = raa.party_id
    AND rc.party_id = hpr.object_id
    AND hcp.owner_table_id = raa.party_site_id
    AND rc.orig_system_reference = 'C100233' -- This I will get from the file for update
    AND raa.orig_system_reference = 'A100961' -- This I will get from the file for update
    AND hcp.orig_system_reference = '<Phone Reference>' -- This I will get from the file for update
    Regards
    Dev

  • Update publishing site to web as well as folder

    I have a site that I am publishing to my MobileMe account. I want to also publish it to a local folder so that I can make a CD from it for special uses. I have done both of these things, but the media files are not kept parallel --- the local folder is not replacing the QuickTIme movies I am using (although the MobileMe site did). I have deleted the entire local folder and republished everything and it still finds some old version somewhere (I have no idea where) of some files and publishes them. What's up?
    Along the same vein --- maybe related? ---, when I update the media files (these QuickTime videos) the "publish site changes" in iWeb does not realize those files are updated and so does not publish the new files unless I publish the entire site again. What am I doing wrong?

    Usually publishing to a folder will give you the latest in changes to the site. It's often the MMe version that has a difficult time. Strange. Try deleting the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder, launch iWeb and try publishing to a folder again.
    If that fails, you can, as a workaround, mount your iDisk, go to the iDisk/Web/Sites folder and drag your site folder to the desktop to get a local copy.
    OT

  • Audio driver error, code 10 error & Media device missing Error in Presario C772TU

    Hello Hi to all,
    I am Manikandan.D working in BOSCH India and new user for this forum.
    I am having presario C7712TU model laptop, recently i reinstalled my Xp OS service pack 2.
    after that i reinstalled all drivers, but it showing some error in audio device driver.
    the error code is 10 and it is telling "media device missing"
    I have installed UAA driver + conexant HD audio driver
    Moreover i couldnt find any wireless LAN icon in network connection tab.
    could any body help me..Since i am in Germany..Now helpless!
    it is big trouble for me!!!
    Many thanks in advance to all!

    Dear Daniel,
    Thank you very much for your reply and effort, help!
    Yesterday i have installed Atheros driver...Now my wifi also turned on without any problem.
    I think you doing great job for all the people. keep the same spirit and continue the support!
    this has to be appreciated! why because some people they will break the head for the system problem.
    you are giving solution for the headache not for the system!!!
    anyways now my problem is solved thanks...!
    if possible send me your mail id to the below address.
    <text deleted for privacy>
    i will keep in touch with you!
    Message Edited by WendyM on 10-21-2009 07:04 AM

  • Variation root must be a Publishing site in Office 365

    I'm trying to create site variations of all site collections in SharePoint 2013 online (Office 365) to accommodate different languages, and I'm getting stuck very early on.  After going to Home -> Site Settings -> Variation Settings and trying
    to create a variation of the top-level website (i.e. '\'), I get the error
    Variation root must be a Publishing site.
    Is there something really simple that I'm missing here?  Any ideas?
    Currently We are creating site Collection with Custom Template and after activating SharePoint Server Publishing Infrastructure Feature got variation setting and other variation options
    Variations
    Settings
    Variation
    labels
    Variation
    logs
    While creating Variation labels its giving error Variation root must be a Publishing site.
    Please provide some proper input on this error.
    Thanks in Advanced!!!
    Thanks!
    Vivek Kumar Pandey

    Hi Vivek,
    Beside the  SharePoint Server Publishing Infrastructure Feature
    at the sitecollection you need to activate the SharePoint Server Publishing site feature. Then are prerequisities are met!
    Kind regards,
    Joran Markx

  • Webpart page in a publishing site

    I have a Sharepoint 2013 on premise environment. Does anyone know how to add a webpart page or add the functionality so that it’s a little easier and more consistent?
    Here is an article outlining how one might add a wepart page but my issue is that even when I go to the sitepages library and hit add new document from the files tab, webpart page is not available? 
    I am working in a publishing site and would really like this page type back. My users do not like the new page layout and prefer the old webpart page options.
    http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2012/11/05/how-to-create-a-web-part-page-in-sharepoint-2013.aspx

    Under page layouts I have "site can use any page layout"  The problem that I am having is that this site was created as a publishing site. It seems when a site is created as a publishing site (as opposed to creating a teamsite and enabling
    the publishing feature) you do NOT get the same options when creating a new page.
    On the Publishing site when I create a page, I get one big column which my users can edit. Under the "Page" tab in the ribbon menu we have the option to adjust the "Page Layout" which seems to offer some options but does not function
    like the old webpart page where you can adjust columns .  The options listed here are a bit limited and overly complicated for my user group.
    On the Teamsite, with publishing enabled, when I create a page I also get one big column that my users can edit.  under the "Page" tab there is NO page layout button.  Under the Format Text tab there is a "Text Layout" button. 
    This is what my users are looking for.  This button gives my users the ability to quickly and easily change the column structure of the site.  It is simple and perfect. 
    Any idea how to add the "Text Layout" button to a pub site?

  • Images Not showing up like they should on published site...

    Ok so here is my problem. I have a site that I upload to a host via fetch. When I first create pages, I upload and check it out and everything looks great. But, as soon as I edit one of the pages and upload, that page's images is all screwed up. Its like when I publish to a folder, it cache's the files or something so old files images I don't even have anymore are stretched on the new ones. I delete the files of previously published sites before I publish to folder every time i update it. I don't know how to explain it, its like it has both files same name and so it looks messed up. ::sigh:: Anyone have any ideas?
    Here is the page on my site thats messed up....
    http://www.luckykitty.biz/BookaDate.html
    as you can see the picture file names are wrong or something. refresh it and the shapes stay pretty much the same but the images change. Keep refreshing and it keeps changing!!
    I can fix it by making a whole new page with a different name but its such a pain because I am contantly updating things. There are many aspects to the site, for instance I have had to redo every single page of every girl on there before from scratch because of this.
    Also for some reason if you click "live cam" at the top then the live cam pinkish blue page in the center doesn't go all the way to the top. It us to! now it doesn't
    Any ideas? Anyone? Is there some folder I'm missing or setting I'm missing here?

    You have to be fairly well organized when you are uploading to a server via FTP.
    I publish my site, first to a folder on the desktop. This way it doesn't get confused with any previous published versions.
    To avoid uploading my whole site if I just have a few alterations to one page, I then drag the page folder, along with any other supporting files, to an Input folder.
    I then run the files through Web Site Maestro to optimize and upload them. This application has a "Smart handling" feature which ignores any files that haven't changed.
    If you use this method with any good FTP application that can "recognize" changed files, it makes life a lot easier. If I don't need to optimize, I use the FTP application Yummy.
    If you are publishing to a folder it doesn't make sense not to optimize your files. This will give you a far faster downloading website and even give it a chance to actually load in Internet Explorer.

Maybe you are looking for