Pull image out of swf
is there any way to pull an image out of an .fla file to edit
in photoshop? I need a logo out of a file but I cant find the fonts
to recreate it. any help would be great!
I am a newb at all of this so talk to me like I'm
stupid:)
helnick wrote:
> is there any way to pull an image out of an .fla file to
edit in photoshop? I
> need a logo out of a file but I cant find the fonts to
recreate it. any help
> would be great!
> I am a newb at all of this so talk to me like I'm
stupid:)
>
If you only have the swf file, try the 30 day trial of the
Sothink
Decompiler.
http://www.sothink.com/
Similar Messages
-
Pulling images out of an iDVD slideshow
Stemming from another question I posted on the Powerbook G4 board, I have a question regarding an iDVD slideshow.
My Powerbook's hard drive, I have a sinking feeling, is dead. My iDisk was full and I was getting ready to buy more storage space when the crash happened. I'd just created and burned a slideshow of pictures from a trip to Austria ... is there a way to grab the individual images out of the iDVD slideshow and get them back as individual photos once my computer is repaired.
FYI, I'm looking into data recovery companies, but I'm not holding out much hope.
Please ... your insights are greatly appreciated.
Powerbook G4 15w/SuperDrive Mac OS X (10.4.8) with 750mb RAMiDVD has an option to add the original pictures to the DVD in the "DVD ROM" area. You can determine if it's there by inserting the DVD in a computer and quitting out of the Player application. Double-click the disc icon and look in the folders -- hopefully you'll find more than two folders and the third one will be labeled something like "DVD-ROM."
As SD says, your other options aren't so great. The slideshow on DVD is a compressed video file (mpeg-2 format) so you'd be uncompressing the video and then extracting a frame. You might check Graphic Converter and Photoshop to see if they can extract a frame without the conversion process.
I don't know if a screen capture would be better... thinking if you had a very large screen, then you'd wind up with a larger-sized screen capture (more pixels).
I assume the pictures were digital and you erased the memory card? There should be software to recover files from the memory card.
John -
Saving image file as binary into database + pulling it out + displaying
Hi guys, this is exactly I have to do, and have no ideal how to do.
It will be greatly appreciated if you can offer help on this.
I don't have a problem putting it into and pulling it out fo the database, it is really the jpg-> binary, and binary->display part that I need help on.
Btw, I am currently using "draw Flatten PixMap.VI" to display a picture in labview, from a jpg file. Can I still use this VI to achieve what I intend to do?Have you tried this:
Saving a binary file to a database with the Database Connectivity Toolset
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
Retrieve image out of Photoshop file
Can anyone help me! I need to pull an image out of a photoshop file I made, I added the image in (jpeg) and have saved the file but did not save the original jpeg that i used, now I cant work out how to get the image out of photoshop so I can use it in another program, any ideas from all of you photoshop genius's
If the image file is a PSD file and the JPG image was placed in as a Smart Object, the very reasonably priced Elements+ add-in (http://elementsplus.net/) can extract the JPG.
Ken -
Screensaver pulling images from who knows where...
All,
I'm a bit confused here. My screen saver used to be an album in my iPhoto. However, seemingly out of nowhere, it was pulling images from who knows where and all over the place.
I have deleted my iPhoto library and re-imported my images and re-made my albums. But, have not fixed the problem. I have also verified and repaired permissions and rebooted also not fixing the problem.
Any help would be greatly appreciated.Try com.apple.screensaver.[long alphanumeric number].plist, if you can find it on your machine. I just changed my Screensaver preferred folder and then did a File Buddy search for .plist files that had been modified in the last 5 minutes, and that one turned up — among a few others. I doubt that the number in your plist's filename would or should be the same as mine, and that's why I didn't include mine above. The path to my file is:
HD>Users>My username>Library>Preferences>ByHost>file -
How do you include images into the swf file?
I have an application that dynamically loads images from a folder to display in the application. Images display fine in the app through the IDE. Since these are not embeded images, compiling the swf leaves them out. How do I get them in? Specifically, how do I do this through the mxmlc ANT task?
This is what I am doing in the code:
new BitmapFileMaterial("components/test/images/testimage.png")
So basically the image needs to be in this location within the created swf file.
Thanks for any help.You have to use the metadata in your source code. You can't alter where the Image will find the data at compile time. It is better to not embed images in most cases, especially if they are big.
If you're asking how to get ANT to copy your image files somewhere, see the ANT doc. I'm pretty sure there's a tag
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
Is there a way to pull pictures out of an iMovie?
I am needing to send the pictures I used in an iMovie to someone, but they are no longer in my photo album. Can I pull them out or copy them from iMovie back to my iPad??
Not that I know of, as far as i know, the only option to get images out of imovie is to screenshot, which can be done by pressing Command,Shift,4, at the same time.
-
Pulling Images From Adobe Reader PDF File
I was sent some artwork in a Adobe Reader PDF. How do I pull the images out of it to use? Thanks.
Don't know that you can with Reader. You should ask in the Reader forum that is linked at the top of this forum. In Acrobat it is easy, but Reader does not have the editing capabilities of Acrobat and it is probably not directly possible.
-
IMAQ image out- what's the best way?
Hello forum,
I'm developing an interface to acquire a square image from an NI-DAQmx PCI 6221 on LabVIEW 7.0 and Windows XP. At present I am simply collecting my information from a physical sine wave generator on the bench, but eventually this will be used to process images from a CARS microscope.
My problem is that I am trying to figure out a user-friendly way of "buffering" all previously acquired images in the session, and then choosing one several of them to save as an uncompressed BMP. At the moment I am using two image displays; one for the whole image overview (picture indicator) and one to pan around and zoom on fine details (IMAQ image indicator). The IMAQ image indicator is also outputting to an IMAQ browser window, which I have modified based on the Browser Example.vi which ships with LV. However, there are several difficulties with this method.
Firstly, I'm not sure how to select an indexed image from the browser itself to save; the only way I can think of would end up wiring the IMAQ image out to the BMP writing VI, but that would only save the current image, and not necessarily the one the user wants.
Secondly, I haven't quite got the hang of combining case structures, event structures and while loops yet, so there's a very specific order things have to be done in or the program hangs, (e.g.. you must press the buttons: Acquisition - Unlock Browser - Stop in that order, nothing else works properly), and I'm pretty sure I've set the browser up wrong because every time I finish with the acquisition window, an error message appears.
Thirdly, it would be nice if I could hide the browser window until I've finished with the other window, but I can't seem to get IMAQ windshow to do that. I have boolean constants wired to Hide/Show and Set/Get but no matter what combination of false and true I use, the window appears anyway.
I will attach the VI and subVIs to this post in a zipped folder, and would appreciate any help you could give me. General constructive criticism on my wiring, methods, Rude Goldbergs, etc, would also be appreciated if anyone has the time, as I'm still pretty new to LabVIEW.
Thanks in advance!
LabVIEW 2013, Windows 7
He who asks the question is a fool for five minutes; he who does not ask the question remains a fool forever.
Attachments:
Image Acquisition VI 0.4.zip 187 KBDH is right about the difficulty in removing wind noise, but hoping it might prove useful, here is a hint I copied from a thread somewhere in this discussion list.
How to export audio from Final Cut Express to (free) Audacity and back again after noise removal.
1) download Audacity
2) in fce timeline, place in and out points at beginning and end of audio
3) select that audio clip, and that clip only
4)file-export-using quicktime conversion, in the pop-up box format as aiff, 44.1kwh 16bit stereo
5)open audacity, make sure box in bottom left corner says 44100
6)file-import-audio
7)go to file and select it, click choose
8) select part of audio with just wind noise, then go to effects noise removal, click get noise profile etc.
9)when satisfied, click file-export, click ok, close audacity
10)Open fce, drag your audio clip to the right hand end of clip. Move playhead to the in marking. Go to File-import
select your audio file, choose.
11) file appears in fce browser. Drag from there to overwrite and the audio goes into the track, perfectly synced
My apologies to whoever posted this hint, I tried to find the name to give credit. This really does work to get rid of room hum, but wind noise is a really different beast and this may not help. I suspect, as DH says, it will remove too much of the audio you want to keep. Hugh -
i placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.
I don't know if this will work but it's worth a try. I wonder if somehow you ended up with a short inside of your iPad. Give the things below are trying to see if that helps. Good luck.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I just copied a folder from my desktop to my pen drive. It transferred fine. I then ejected the pen drive then pulled it out. On doing so it said it had not been ejected properly!!!!! The folder is now missing from my computer and the pen drive. Pulling my hair out please help!
When youi say Eject, the RAM copy of the Directory is written back to the drive. On a pen drive, this can take several seconds.
If you get too excited and don't wait those few seconds, the directory write will be incomplete, and the drive will lose its integrity or lose files or both. -
Click on a image in the swf and go to a specific section of the page
Can any one help me with this.
I do have an SWF file (in the main html page) with 6 time
frames. Each frame has 3 images. On the other hand I do have a
second html page that is nothing but the main title and 18
sections. Every section describes one the SWF’s images.
What I am looking for is whenever I click on one of the
images of the SWF file; I want to go to the specific section that
describes the image I have just clicked on.
Thanks alotI am trying to do this as well. I have a drop down menu that
I have as an embedded SWF in my html page, and I want one of the
buttons to take you to a specific part of the html page. Does
anyone know how to do this? Using the #name like in html does not
appear to work. Can't find the answer anywhere!!!
Text -
The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had
maggielou wrote:
I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed. However, a few of the recent pictures have shown up on my phone.
IHow could I get these from my MacBook to my phone?
Thanks again.
When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups. You can't view the backups.
Look at the two links I provided.
You still didn't answer any of my two questions I asked. -
I'm traveling from Ontario to BC via car and had my iPad in my bag with me in the back seat? Nothing out of the usual stopping for gas and when I
Pulled it out I noticed a huge crack and not sure what happen or what can be done please helpAccidental damage is not covered by warranty.
It will cost you approximately US$219.00 to US$299.00 depending on the model.
Apple will replace the entire iPad; they don't repair.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad -
Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!
You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/
Maybe you are looking for
-
Mbox Mini and Logic for school. Question?
I am going to Fullsail in Orlando, Florida in Jan. 2008. They teach Pro Tools HD there, but just added Logic Pro to the Recording Arts program. I'm thinking of buying a mbox mini and Logic Express to get more familiar with both programs before going
-
Total issue qty for given period.
Hello Plz let me know whether Total issue qty for given period is stored at any place in R/3?? There is requirement to calculate value for given period as Value of Total Stock - Value of Total issue qty. Thnx Nilesh
-
Windows 8 RT and printing to PDF
Hi! I need to print from Internet Explorer a page to PDF file. Normally I would do this for example with Cute PDF etc. PDF printing application but I am unable to find one from Windows Store. Does anyone have any ideas on how to print PDF from IE? Th
-
Very slow music player on iPad
Very very slow iPad music player on iPad? I see loads of questions on this but no answers. Have switched off music match and really anything that could be causing the delay. Currently trying to reset the iPad device but if there are any quick answers
-
Adobe form MICR not printing transit, amount chars
Hi, I am using MICR Std font in the adobe form and the form is also loaded on printer which has device type TROY MICR. I can see the numbers in MICR font but I am not able to print special chars. I tried to do that using 'A' 'B' 'C' 'D' as we do in s