Pull Multiple reports for smartview in excel

Hello,
I am very new at VBA and smartview. I was hoping if someone knows of a way to open multiple reports from smartview into excel using VBA. I believe smartview itself does not allow to open multiple reports because of POV settings. Thanks for the help in advance.

Thank you both Matt and Glenn,
I am talking about automating a way to pull multiple financial reports in excel. At first I was running into an issue where some of my reports that I pulled from Reporting and anlysis framework, they would not open in the proper excel workbook and it would break the link so I would not be able to refresh. Next time I would have to reopen all the reports, that's why I was hoping there would be a VBA code to automated pulling multiple financial reports (not grids). I hope I am making sense. Thanks for the help.

Similar Messages

  • Tips on designing reports for export to excel

    There is a document mentioned in help that I have a link to and the link and searching never get me to it. Can anyone help me locate this...I need tips on how to better design a report when you know it will be used for exporting to excel.
    the document is supposed to be called    scr_exportexcel.pdf
    Thank you!
    Kristin

    Hi,
    Try to search Product guides from http://help.sap.com/
    Regards,
    Shweta

  • Pull out Report for all configured Collection veriables in SCCM 20007

    Hi All,
    I have tried many ways but failed to pull out a report on collection veraiables.
    It would be great, if someone could suggest how to pull out a report for all collection veriables which are configured.
    Thanks
    Regards, Dan

    Hi,
    Check if this link helps :
    http://it.peikkoluola.net/2013/09/30/display-a-sccm-collection-variable-and-its-value/
    ~ Räjeésh M | Blog:
    ScorpITs | Please remember to 'Mark as Answer' or 'Vote as Helpful' on the post that helps. It helps others reading the thread and recognizes useful contributions.

  • Open multiples reports for the same document

    Hi,
       I created 3 PLD reports for PO, I am wondering in SDK, how can I open all 3 PLD reports when I click on the preview button for a PO document?
       Thanks
    Chris

    Hi Chris,
    You cannot. I use Crystal Reports when I need to open more then one document layout at the same time.
    Regards,
    Vítor Vieira

  • Combining multiple report into one tabbed Excel

    If we have a 28 separate Excel reports in BO, is there a way to create one report that will pull in each of these as a separate tab in one single Excel workbook?
    They are all using the same universe and similar queries.
    Thanks.

    If these are WEBI or Crstal Reports you can insert these Reports in Excel Workbook in seperate TABs through Live Office Connections, If you have Live Office installed on your desktop.
    OR
    With multiple QUERIES in WEBI document you can have a single Report with MERGE DIMENSION option provided you have common dimension for all 28 QUERIES.
    Regards
    Satya

  • PDF Maker in Excel 2003 prompts to save multiple files for one report

    It seems each time i try to PDF multiple tabs I end up having to save more than one copy of the report in order to get all the sheets in PDF form.  I then have to merge all the PDF copies into one file and save it.  Does anyone know why it is generating multiple reports for the tabs in excel and how to get all the tabs to load as one PDF file from the get-go?

    Jeffrey and Karen ... I've used Preview for years but recently upgraded to OS Snow Leopard (I am reluctant to change software!). I used to freely drag and drop pages from the sidebar one pdf file open in Preview to the sidebar of another - as you recommend - without problem. Now if I do that, the caption in the bar at the top of the document says "2 documents, 5 (or whatever) open pages", and I can't save the whole thing as one document - Preview wants to save the tranferred pages as their own document. What has changed? What am I not understanding here?

  • Creating multiple reports from one query

    Hello Everyone
    I are designing crystal reports where 1 query is built for 1 report / 1 sub-report. To improve overall efficiency of reports, I am trying to design multiple reports/ subreports from the same query. All the sub-reports belong to the parent report and they are very similar to each other.
    For example: in Webintelligence, we can just create 1 data provider and pull multiple reports from it and display it in multiple tabs.
    Can we do the same thing in Crystal reports??
    Please advice.
    Thanks
    Edited by: Devesh  Modi on Jun 9, 2010 11:19 PM

    Hello,
    If you are using WEBI then you have access to BOE. Create a Universe and publish it to the Repository and then you can use it as your data source.
    But I think what you are asking is how to query the DB once? Not possible, each subreport will run the query each time it's viewed.
    What you may want to do is create a Stored Procedure and get all of you info into one data collection and not use subreports, use grouping to emulate subreports. As an Example ....
    You may want to create a case in Service Market Place since you have BOE and work with a Report Design Rep to help you work out the best solution for you.
    Thank you
    Don

  • Need vendor report for district/county

    I am looking to pull a report for a vendor by district/county. 
    If possible, jurisdiction code would be nice.
    I was looking at a range of reports around S_ALR_87012087 but none include district.  Even vendor search doesn't have this function.
    Thanks!

    Dear Michelle Lansky
    In the same t-code S_ALR_87012087, go to dynamic selection (Shift + F4) and select the required fileds like country etc.
    Thanks & Regards,
    VB

  • Report for Unposted assets

    Hi Gurus,
    Could you please me provide the procedure of pulling the report for Unposted assets and T-code.
    If any documentation on the same please do the needful by providing.
    Regards,
    Praveen.

    Hi,
    the report is available in the easy access menu at the node infosystem -> day-to-day-activities.
    Regards,
    Markus

  • SCCM Report for Pending DP status

    Due to the issue in our sccm  hierarchy , there is problem in DP copying
    We want to pull the report for past one week packages we deployed, that how many of them DP status is Install pending.

    Yes, I know this is an old post, I’m trying to clean them up.
    What wrong with reviewing the built-in called All active package distributions?
    http://www.enhansoft.com/

  • CDR report for CIPC

    Hi All,
    Good evening. I have a query. Can we pull CDR report for a persons IP communicator separately and the desk phone separately from call manager?
    Regards
    Sankar.              

    No, assuming they're a shared line, you'll get all calls from that line in the report.
    If they're separate lines, just run a report on each DN.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • XML Report for multiple excel sheets

    Hi,
    I am trying to build an XML report in Oracle Apps 11.5.10.2 for output in excel with multiple sheets. Can anyone help me how to achieve this ?
    Thanks,
    Dinesh.

    Hi,
    Just check these links and might be use full.
    I have achieved by following this link
    Generating Multiple Sheet Excel Output using XML Publisher
    https://blogs.oracle.com/xmlpublisher/entry/multisheet_excel_output
    Thanks & Regards
    srikkanth

  • Report to pull multiple Product Categories/Organizational Units per project

    Hi Experts,
    We are facing the following issue.
    We have created a Project and have associated multiple Product Category & Organization to this project, many to One relationship. This we have achieved through customization. When we are pulling report for this project through Reports-> Project Summary Extract. Itu2019s giving us only one Product Category & one Org Unit per Project. The business wants us to pull all the Org Units & the Product categories associated with the Project, when we are displaying the report. This org units & product categories will be shown in Org Unit & Product category columns respectively separated by commas.
    Looking forward for your help.
    Thanks,
    Ritik

    Hi Vikram,
    We have not created any custom fields neither for the Product Categories nor for the Org Unit/Business Unit(T1.BUSINESS_UNIT_OBJECT_NAME). These two fields are already there in the Result fields for the report Project Summary Extract . I am just looking for some way to pull all the Product categories & Business Units associated with the project  in the Product Categories column & in Business Unit column respectively separated by comma or show it as in example 2 given below(in multi rows).
    e.g. 1:
    Project:     Product Categories:
    PROJ1   ->  PC1,PC2,PC3
    Or
    e.g. 2:
    Project:      Product Categories:
    PROJ1        ->                           PC1
    PROJ1     ->                    PC2
    PROJ1     ->                             PC3
    I have already copied the existing query & modified it to achieve the above, but still this is not working. Currently i am querying FCI_MAS_INTERNAL_CAT for Product Categories & FCI_PRO_PROJECTS for projects.
    Can you please provide me any sample query to achieve this functionality. Any help on this is greatly appreciated.
    Thanks,
    Ritik

  • Pull multiple excel files in a folder into a table.

    Hello,
    I am using the instructions available in the link below to pull multiple excel files in a folder into a table.
    http://stackoverflow.com/questions/6190578/how-to-import-excel-files-with-different-names-and-same-schema-into-database 
    The instructions use two variables FilePath & FolderPath which i would like to record into another table. I dont have coding experience and therefore i am stuck. I see the code above but i am unable to modify for my usage.
    Any help would be greatly appreciated.

    TopCat,
    If you wanna read the Filepath/FOlderpath values from a table int he database, use the Single row resultset option of Execute SQL task. That should help. refer:
    http://stackoverflow.com/questions/18828498/ssis-set-multiple-variables-via-a-single-sql-task
    http://technet.microsoft.com/en-us/library/cc280492.aspx (populating a variable with resultset section)
    For recording the path variable data to a table in database, use ExecuteSQL task to achieve the functionality again:
    Bind the variable data into  a sql variable : smthin like
    "INSERT INTO Data_Result(Result) VALUES ('"+@[USER::my_data]+"')"
    Then use this sql variable as the statement to be executed in execute sql task.
    Thanks,
    Jay
    <If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

  • Reporting for multiple Accounts by Partner dimension for multiple Entities

    Hi all,
    I have a report in Reporting Studio which uses a Sum column formula to add data for all the members selected in a prompt for the Entity dimension (which is in the columns of the report).
    In the rows I have 2 dimensions, Partner and Account. I have the report set up to display the children of Partner and multiple accounts for each Partner. The issue I am having is that I would need to actually calculate one of the account totals (it is a Yield account) since summing the yields for partners is not valid.
    I can't just pull out and calculate the Yield accounts though because the accounts need to be listed by Partner.
    Is there a way to group two rows so that I can pull out and calculate the Yield account but still display the accounts by Partner?
    So I was thinking:
    Partner A Account 1, Account 2
    Partner A Yield
    Partner B Account 1, Account 2
    Partner B Yield
    I can't hardcode this as there are hundreds of Partners. If there is a way to set up auto-calculate to Average only the Yield accounts, that would work as well in theory.
    Any help would be appreciated. If any clarification is needed just let me know.
    Thanks.

    Hi Mehmet,
    There are too many possible department combinations to actually create member formulas for each one.
    The formula for Yield is Revenue/Units. So an example would be $100,000 revenue divided across 1,000,000 units gives a Yield of 0.10.
    The more I think about this problem, the more I realize that this may not possible. If a manual calculation is required I would need to have it so that I'm able to match up the children of Revenue with the children of Units in order to calculate the various Yields. From my experience this isn't possible. I am staying away from hard-coding in the report as it would create issues down the road.
    If there is some way to utilize auto-calculation that may be the only solution.
    Any other thoughts would be appreciated though.
    Thanks.

Maybe you are looking for