Pulling data from crosstab into main report

Hello
I want to pull some data from crosstab into main report and show it in same row.
Activity date will always be today date. Loadnum is a uniq id number, carriercode also has uniq id.
In one row i have load,activity date, carrier code etc . I need to add a field which will show count all loads before today made by carrier code. Right now i added a crosstab which is counting loads made by carrier code. Is there a chance to pull/get the data/field from crosstab into the main report?
Thanks for any suggestions

HI Mateusz,
Where is the crosstab located?
You can do this without trying to get the count from the crosstab.
1) Group on the CarrierCode field
2) Go to Insert > Summary > Choose the field you used under 'Summarized Fields' in the Crosstab > Place this summary on the Group Footer 1
3) Suppress the details section and move all fields to the Group Footer.
-Abhilash

Similar Messages

  • Pulling data from oracle into sql server 2005

    hi,
    these days i am working on sql server 2005 on windows server 2008 64 bit.
    and oracle 10g on 32 bit unix.
    my problem is that when i am pulling data from oracle into sql server it shows me about *500-700 entries less*.
    why this is happening? is it because 32 bit to 64bit? or is it because of different os?

    Akki,
    are you using snapshot or replication from MSSQL? I am doing the same thing, hope to share your experience.
    I am using import/export from MGT studio and pull some data from Oracle database, I am working on how to update the changes on these tables pulled from Oracle.
    Thanks,
    -hank

  • Want to pull data from MDM into SAP and send it to portal.

    Hi,
    I have a requirement where-in i want to get some data from master data management application(a third party application) into sap and send that data to portal. Kindly suggest me on how to go about doing the same. Awaiting your kind responses guys.
    Regards
    Shailendra.k

    Hi Shailendra,
    Your requirement is a huge activity with multiple tasks which can be done in multiple ways.
    Some basic points:
    1. You can read data from your Third party application using
    a. Native SQL or
    b. a middleware as PI or
    c. using connectors based on the platform of the Third party application (VB, .NET, etc.)
    2. Data can be sent to portal using
    a. Middleware as PI or
    b. Creating RFC's
    c. BAPI's.
    For any specific details, you can check SDN as detailed posts on each of the above is available or can post further.
    Regards,
    Pranav.

  • Urgent How can I pull data from Essbase into BW 3.5

    Hi All,
    Can anyone tell me the extraction mechanism to extract data from Essbase (Hyperion Sales cube) into BW 3.5. Is it possible to extract data using DB connect. As far as I know it cannot be used for BW 3.1C but what about 3.5. Any links or information is greatly appreciated.
    Thanks
    Padma

    Hi Padma,
    by chance I read this post, I hope the information on following web-blog would be helpful for you:
    /people/happy.tony/blog/2006/09/18/hyperion-essbase-data-extraction-transformation-and-loading
    Regards,
    Lilly

  • Automatically Pulling Data From Web Into Spreadsheet

    I would like to pull specific data that changes constantly into my spreadsheet from the web.
    Specifically stock prices, price of gold etc.
    Is there anyway to do this automatically or do I have to reenter the data manually each time I load the spreadsheet?

    There are some ways to do this using a script by Yvan.  Without scripts this is not possible.

  • Pull data from a table in HTML format from external URL into a Servlet

    How do I pull data from existing website html table into a Servlet?
    I will need to pull the data into a servlet. So, the servelet will need to go to the URL and get the data and save them as variables.
    I know I will need an array to store the data. I just dont know how to call the URL and have the servelet search the site for the <table> </table>.
    I will later use this to save to a database.
    Thanks
    Edited by: DJMegabit on Apr 14, 2010 7:36 PM

    Maybe give us more details about what exactly You'd like to achieve. I guess that there might be better solutions to the problem.

  • How to load the data from informatica into bw & how to report the data

    Hi friends,
    how to load the data from informatica into bw & how to report the data
    using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
    Thanks,
    madhu.

    Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
    For BW informatic integration refer following docs:
    http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
    http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
    http://devnet.informatica.com/learning/ePresentations.asp
    http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
    http://www.informatica.com/customers/utilities_energy/fpl_group.htm
    http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22

  • How to pull data from sql server ( Seperate server) & upload it into sap

    Hi All,
    I have a SQL Server database in System1,
    data base name          DB1
    Table name                 TB1
    I want pull data from TB1 & upload the same into ztable in SAP.
    How I can I achive this in ABAP.
    Thanks in Advance
    Appropriate points will be rewarded.
    Arun kumar

    Hi Arun,
    You have to do the following:
    1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
    2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
    Regards,
    Raj
    For eg:
    TABLE DBCON Entry can be like this...depends on your External database..
    CON_NAME                                  Raj                Logical name for connection
    DBMS                                           MSS              Microsoft SQL Server
    USER_NAME                                <User name>     For SQL Serve
    PASSWORD                                 <password>            "    "
    CON_ENV                  MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
    DB_RECO                 Availability type for an open database connect  
    FUNCTION z_houston_connect.
    ""Local interface:
    EXEC SQL.
    CONNECT TO 'RAJ' AS 'V'
    ENDEXEC.
    EXEC SQL.
    SET CONNECTION 'V'
    ENDEXEC.
    *- Get the data from MS-SQL Server
    EXEC SQL.
    open C1 for
    select
    l.loc_id,
    l.loc_name,
    a.acc_id,
    a.acc_name,
    d.person
    from ho_loc_mast as l
    inner join snd_acc_mast as a on l.loc_id = a.loc_id
    inner join snd_acc_addr as d on a.loc_id = d.loc_id and
    a.acc_id = d.acc_id
    where l.loc_id = '001'
    ENDEXEC.
    DO.
    EXEC SQL.
    FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
    ENDEXEC.
    IF sy-subrc = 0.
    PERFORM loop_output.
    ELSE.
    EXIT.
    ENDIF.
    ENDDO.
    EXEC SQL.
    CLOSE C1
    ENDEXEC.
    ENDFUNCTION.

  • One report to pull data from SQL or DB2

    Hi Guys,
    First post here.  I have scoured the internet using our good friend google for answers and have come up empty.  I hope someone can help me here!
    Some Info: Crystal XI R2, Visual Studio 2005, Ms SQL Server 2005, DB2, VB.NET
    What I am trying to accomplish is using one report to pull data from either SQL 2005 or DB2.
    The problem I get is if the report is configured to pull data from SQL 2005, I cannot change it using the code below to pull data from DB2.  The SQL Report uses the Microsoft OLEDB Provider.  The DB2 report uses the IBM DB2 UDB for iSeries IBMDA400 OLEDB provider.  When I quickwatch the oCRTable logon information, it seems to retain the other database's info.
    Any ideas?
    My code:
        Private Sub LoadRpt(ByVal rpt As String)
            Try
                Dim strReport As String
                Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                Dim rpt As CrystalDecisions.CrystalReports.Engine.ReportDocument
                Dim oCRTable As CrystalDecisions.CrystalReports.Engine.Table
                Dim oCRConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo()
                strRptNm = String.Format(".rpt", rpt )
                strReport = String.Format("\{1}", Server.MapPath("Reports"), rpt )
                crReportDocument.Load(rpr)
                '   check to make sure report is loaded; if not, then do nothing
                If crReportDocument.IsLoaded Then
                    oCRConnectionInfo.DatabaseName = ConfigurationManager.AppSettings.Item("DataBase")
                    oCRConnectionInfo.ServerName = ConfigurationManager.AppSettings.Item("Server")
                    oCRConnectionInfo.UserID = ConfigurationManager.AppSettings.Item("Profile")
                    oCRConnectionInfo.Password = ConfigurationManager.AppSettings.Item("Password")
                    For Each oCRTable In crReportDocument.Database.Tables
                        oCRTable.LogOnInfo.ConnectionInfo = oCRConnectionInfo
                        oCRTable.ApplyLogOnInfo(oCRTable.LogOnInfo)
                        oCRTable.Location = oCRTable.Location
                    Next
                    For Each rpt In crReportDocument.Subreports()
                        For Each oCRTable In rpt.Database.Tables
                            oCRTable.LogOnInfo.ConnectionInfo = oCRConnectionInfo
                            oCRTable.ApplyLogOnInfo(oCRTable.LogOnInfo)
                            oCRTable.Location = oCRTable.Location
                        Next
                    Next
                ... other code ...
                End If
            Catch ex As Exception
                ... other code ...
            End Try
        End Sub
    Edited by: Mace Windu on Feb 7, 2009 7:55 AM
    Edited by: Mace Windu on Feb 7, 2009 7:56 AM

    David,
    Your suggestion worked to near perfection.  The only problem was that if I configured the datasource locations of the report and sub reports in CR to use the SQL ODBC, the .net program would successfully log in using the DB2 info but had a problem reading the data.  If I configured the datasource locations of the report and subreports in CR to use the DB2 ODBC, everything worked!  Thanks for the advice. 
    The force is strong with you.
    Mace

  • Use ODI to Extract Data from Hyperion Planning & Budgeting report to Excel

    Hello
    Can someone tell me please how to Extract Data from (Financial Reporting in) Hyperion Planning & Budgeting into Excel Using ODI?
    Would the steps be the same as Creating an ODI Project and Interface: Exporting a Flat File to a Flat File? If not, why?
    Best Regards.
    Edited by: Saturday on May 26, 2012 9:55 PM

    Where do you think the financial reports get their data from? Financial Reports pull data from data sources such as Essbase, HFM.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Having total brain fart - pulling data from two differnt tables

    Good morning,
    I am completely having a blonde moment here.
    My main select statement can pull all the data I need from one table however I need to define my result set by date range and the date data is held in another table. I am trying to remember how to write my statement to pull data from two tables in the same database.
    I haven't written query in a couple of years and was self taught previously - I need data our report management program cannot produce.
    Any help would be fantastic! Thank you :-)
    Dez
    Edited by: user10773439 on Jan 8, 2009 8:12 AM

    Here is the pseudo sql.
    select columns_from_table_a, columns_from table_b
    from table_a a,
    table_b
    where a.common_column = b.common_column
    and b.date_column > = <startdate>
    and b.date_column < <end_date>+1;
    --Dont forget to_date your date values                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Clarification on details regarding getting data from APO into BW

    Hi Friends,
    I need some clarification in terms of getting data from APO into BW for reporting:
    I observed that SAP has provided standard data flows for PPDS module, where as for the Demand Planning and Supply Network Planning SAP has just provided some standard InfoCubes ex: 0APO_C07, 0APO_C10, 0APO_C11, 0APO_C12.
    Which makes me believe that for Demand Planning and Supply Network Planning we need to generate DataSources from the Planning books in DP & SNP and build our own custom data flows. In that case what is the use of above mentioned InfoCubes provided by SAP?
    Also in my current project the client has built a custom DataSource on top of a Planning Book in DP and created custom data flow in BW for reporting and also created a Back up cube in APO.
    My question on this is, what is the use of this Back up cube in APO, what is the need to maintain two same cubes in two different systems?
    My next question is, I have installed complete data flow for 0APO_C02 (Orders Data) in BW and loaded data. In SAP documentation it says when we try to load data for a particular date range using this InfoSource (0APO_PPDS_ORDER_01), it directly loads data from the live cache.
    Is there a way to know if the data is coming from Live Cache or from APO server, can we get data from live cache for 9A*** Datasources also, which we create on planning books in DP and SNP?
    Any comments and Info will be greatly appreciated. Thanks!

    Hi Sunitha, thanks for your inputs. So does that mean for Demand Planning and Supply Network Planning, SAP has not given any standard DataSources because it makes more sense to build DataSources from the planning books as each company has their own planning strategies based on how they do there business. Right?
    And for these modules there is no other way rather than generating DataSources from Planning Books and build the Data Flows based on it. Right?
    Also these generated DataSources i.e. 9A**** pull data from live cache itself right or is there any setting that we need to enable for it to get data from live cache?
    Thanks again for your valuable inputs hope to get answers to above questions as well.

  • Newbie questions regarding pulling data from hyperion planning cube w/OBIEE

    Hello there,
    we've recently implemented Essbase and are currently pumping it full of revenue/expense data from out source systems to calculate NOI. This data is stored in a staging table at the detail level where it is sourced into Hyperion and aggregated. We also have OBIEE 10g (plan to upgrade to 11g later this year) and we would like to connect to and report out of Essase. Our ultimate goal is to be able to report on the NOI numbers in the planning cube but have the ability to drill down to the detail level which is not stored in Essbase. We've heard it is possible, albeit not native for OBIEE 10g to do this. We've also heard that it is not best practice to use our transactional cube for this type of reporting but to actually create a second "reporting cube".
    What are best practices for getting this NOI data out of Hyperion and merging it with our relational detail reporting? Can we somehow export the data from the cube and store it in a relational database? Should we clone the cube (if even possible) and configure both it and our relational source in the BI repository and setup all drill-throughs there?
    Any info is GREATLY appreciated. Thank you.
    Edited by: cisGuy on Sep 20, 2010 5:31 PM

    i have found information on how to use ODI to extract data for the cube. What I'm really trying to find out though is best practices for reporting off summary level data in Essbase with the ability to drill-through to the detail.
    We've heard reporting off the same cube that users are writing back and transacting on is bad. Do we need to make a "reporting cube" and then bring that in OBIEE and merge it with a relational source or is it better to extract the data from Essbase into flat files and join it to detail tables in our relational source?

  • SSRS pulls data from ESSBASE cube, data not showing

    Dear Experts,
    We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
    Thanks very much.
    Grace

    Hi ,
    Check the following:-
    1 Check whether you have made the joins properly.
    2 Check data at multiprovider level .
    3 is data available for reporting in both the cubes
    Regards
    Rahul

  • UNIQUE Problem in pulling DATA from DATA base table to internal table

    Dear Experts,
    I am new to ABAP. I have a very basic question but looks a quite puzzling one to me. Hemnce I am posting it here.
    I am facing an unique problem in pulling data from database table and populating that data into internal table for further use.
    The data in the database table "Zlt_mita" with fields M1 (Employee Name, Type: Char20) and M2 (Employee Code, Type Char7) are:
    Plz refer the screenshot in the attached file:
    My Code:
    1) When I try to pull data from Dbase table by taking M2 as parameter.
         This code is succcessful and I am able to populate data in internal table it_dat.
    TYPES: Begin Of ty_DAT,
                     M1   TYPE  Zlt_mita-M1,
                     M2   TYPE  ZLT_mita-M2,
                 END  OF  ty_DAT.
    DATA: it_dat        TYPE STANDARD TABLE OF ty_dat with header line,
              wa_dat      TYPE   ty_dat.
    PARAMETERS: p_mitar    TYPE  Zlt_Mita-M2.
    SELECT           M1
                           M2
            FROM     ZLt_mita
            INTO       TABLE it_dat
            Where     M2 = p_mitar.
    Loop at it_dat into wa_dat.
       WRITE:/2 wa_dat-M1,
                  10 wa_dat-M2.
    ENDLOOP.
    2) When I try to pull data from Dbase table by taking M1 as parameter.
         This code is NOT succcessful and I am NOT able to populate data in internal table it_dat.
    TYPES: Begin Of ty_DAT,
                     M1   TYPE  Zlt_mita-M1,
                     M2   TYPE  ZLT_mita-M2,
                 END  OF  ty_DAT.
    DATA: it_dat        TYPE STANDARD TABLE OF ty_dat with header line,
               wa_dat      TYPE   ty_dat.
    PARAMETERS:    P_Mita    TYPE   ZLT_Mita-M1.
    SELECT           M1
                           M2
            FROM     ZLt_mita
            INTO       TABLE it_dat
            Where     M1 = P_Mita.
    Loop at it_dat into wa_dat.
       WRITE:/2 wa_dat-M1,
                 10 wa_dat-M2.
    ENDLOOP.
    Why is this happening when both M1 and M2 are Type Character fields.
    Looking forward for your replies.
    Regards
    Chandan Kumar

    Hi Chandan ,
    Database fetch is case sensitive ,So u need to give exact format in where condition.
    Make your parameter and database in same case so that you need not worry about case sensitivity .
    Check the lowecase check box in the domain .
    Then declare your parameter 
    PARAMETERS:
    P_Mita
    TYPE   ZLT_Mita-M1 LOWER CASE . 
    You can do the vice versa also by unchecking lowercase and giving Upper case instead of lower in parameter declartion .
    Regards ,
    Juneed Manha

Maybe you are looking for