Pulling process information based on overseer role

Hi ,
I have a set of processes running with a particular overseer role. Is there a way to query GP to pull out all these process information based on overseer role using GP API. I tried the below code, but it doesnt work as I expected.
This basically comes back with the proecesses who is initiated by a particular user wrapped in the user context.
IGPProcessInstanceInfo[] processInstanceInfo =
               runtimeManager.getRunningInstances(
               GPSearchRole.SEARCH_ROLE_OVERSEER,
               startDate,
               endDate,
               userContext);
Any inputs ?
-Thanks in advance,
KN.

Try
/SPE/BUPA                      SPE Business Partners
/SPE/BP_STORE_ADDRESSES        Business partners store addresses
BPAR_P_PARTNERS_WITH_ADDRESS
SD_ADDRESS_KEY_GET_FROM_VBPA
SD_ADDRESS_TYPE_GET
SD_PARTNER_ADDR_DIALOG_INTERN
VELO01_GET_PART_ADDR_FOR_VBELN   get the partners and their address details
WS_LM_ADDRESS_READ
WS_LM_CONTACT_ADDRESS_DISPLAY
^Saquib

Similar Messages

Getting the Address Information based on the Partner Number & Partner Role

Hello,
         I have a requirement where in I am populating the Address into a Custom Segment Z1E1ADRM1 where I am reading the Partner Data from E1ADRM1 Segment. It has the PARTNER_Q which contains the Partner Role (WE,AG,RE,RG etc...) and PARTNER_ID which contains the Partner Number. Now, using VBPA Table, I am populating the STREET4 and STREET5 manually by passing the Address Number got from VBPA Read.
        Instead, is there any Function Module / BAPI which can be used to get the Address Number / Address Information based on the Partner Role and Partner Number as Input Parameters? Please Let me know.
Thanks and Regards,
Venkat Phani Prasad Konduri

Try
/SPE/BUPA                      SPE Business Partners
/SPE/BP_STORE_ADDRESSES        Business partners store addresses
BPAR_P_PARTNERS_WITH_ADDRESS
SD_ADDRESS_KEY_GET_FROM_VBPA
SD_ADDRESS_TYPE_GET
SD_PARTNER_ADDR_DIALOG_INTERN
VELO01_GET_PART_ADDR_FOR_VBELN   get the partners and their address details
WS_LM_ADDRESS_READ
WS_LM_CONTACT_ADDRESS_DISPLAY
^Saquib

Custom plugin based on user role membership

Hi all,
I would like to develope a custom plugin that generates account userid (on process form) with different syntax against role membership.
With "syntax" I mean name.surname.random_number for employee users and surname.company.random_number for example.
I'll try to explain the scenario more in details:
1. I create a user identity through a request
2. After user identity has created successfully, I assign a role to the user. Since roles are associated with access policies, role assignment triggers provisioning on target system.
3. The custom plugin that I would like to develope shuold be able to generate proper userid against role membership. For example if I assigned the role "Project Manager" the custom plugin should generate the account userid with name.surname.random_number format; viceversa if I assigned the role "External Reseller" the custom plugin should generate the account userid with surname.company.random_number format.
Looking for custom plugin based on role membership in forum, I found a couple of threads about this subject:
- Email notifications after role grant
- Re: OIM 11g Role Membership Event Handlers.
I tried to implement what explained in the threads, but I would be sure about what I've done.
Here what I've done:
1. created plugin.xml file
2. created EventHandler.xml metadata file
3. developed a java calss for testing pourpose
4. copied the custom plugin class to OIM server for example in $MIDDLEWARE_HOME/OIMPlugins/lib
NOTE: during this operation I have exactly mantained the same directory structure of custom java package.
For example custom plugin class is under my.custom.plugin java package and I have copied custom java class under $MIDDLEWARE_HOME/OIMPlugins/lib/my/custom/plugin folder
5. created a zip file containing custom plugin class (always with its directory structure) and plugin.xml file
6. copied the zip file to $OIM_HOME/server/plugins
7. edited ant.properties file (under $OIM_HOME/server/plugin_utility) setting wls.home and oim.home variables
8. built the wlfullclient.jar (only the first time)
9. registered the custom plugin
10. created the custom plugin dataset file
11. imported it in OIM database using "weblogicImportMetadata" utility
12. purged cache using "PurgeCache" utility
NOTE: all the steps above was executed using the system user running OIM process
test java class
package com.zeropiu.sky.custom.eventhandlers;
import java.io.Serializable;
import java.util.HashMap;
import com.thortech.util.logging.Logger;
import oracle.iam.platform.kernel.spi.ConditionalEventHandler;
import oracle.iam.platform.kernel.spi.PostProcessHandler;
import oracle.iam.platform.kernel.vo.AbstractGenericOrchestration;
import oracle.iam.platform.kernel.vo.BulkEventResult;
import oracle.iam.platform.kernel.vo.BulkOrchestration;
import oracle.iam.platform.kernel.vo.EventResult;
import oracle.iam.platform.kernel.vo.Orchestration;
import oracle.iam.platform.context.ContextManager;
import java.util.Set;
public class TestUserAnonimi implements PostProcessHandler, ConditionalEventHandler {
     private static final Logger logger = Logger.getLogger("com.zeropiu.sky.custom.eventhandlers");
private static final String className = "TestUserAnonimi";
     @Override
     public void initialize(HashMap<String, String> arg0) {
          // TODO Auto-generated method stub
          String methodName = "initialize";
          System.out.println("###### " + className + " - " + methodName);
     @Override
     public boolean isApplicable(AbstractGenericOrchestration abstractGenericOrchestration) {
          // TODO Auto-generated method stub
          String methodName = "isApplicable";
System.out.println("###### " + className + " - " + methodName + " - STARTED");
System.out.println("###### " + className + " - " + methodName + " - ContextManager.getContextType(): " + ContextManager.getContextType());
System.out.println("###### " + className + " - " + methodName + " - ContextManager.getContextSubType(): " + ContextManager.getContextSubType());
System.out.println("###### " + className + " - " + methodName + " - abstractGenericOrchestration.getOperation(): " + abstractGenericOrchestration.getOperation());
System.out.println("###### " + className + " - " + methodName + " - Printing ContextManager parameters");
HashMap allContextManagerPairs = ContextManager.getAllValuesFromCurrentContext();
Set<String> allContextManagerParams = allContextManagerPairs.keySet();
String[] parameters = allContextManagerParams.toArray(new String[allContextManagerParams.size()]);
for (int i = 0; i < parameters.length; i++) {
          System.out.println("###### " + className + " - " + methodName + " - Context parameter " + i + ": " + parameters[i] + " - Object type is: " + Utils.getObjectType(ContextManager.getValue(parameters)));
System.out.println("###### " + className + " - " + methodName + " - ENDED");
return true;
     @Override
     public boolean cancel(long arg0, long arg1,     AbstractGenericOrchestration arg2) {
          // TODO Auto-generated method stub
          String methodName = "cancel";
          System.out.println("###### " + className + " - " + methodName);
          return false;
     @Override
     public void compensate(long arg0, long arg1, AbstractGenericOrchestration arg2) {
          // TODO Auto-generated method stub
          String methodName = "compensate";
          System.out.println("###### " + className + " - " + methodName);
     @Override
     public EventResult execute(long arg0, long arg1, Orchestration orchestration) {
          // TODO Auto-generated method stub
          String methodName = "Eventresult execute";
          System.out.println("###### " + className + " - " + methodName);
          return null;
     @Override
     public BulkEventResult execute(long arg0, long arg1, BulkOrchestration arg2) {
          // TODO Auto-generated method stub
          String methodName = "BulkEventResult execute";
          System.out.println("###### " + className + " - " + methodName);
          return null;
plugin.xml file
<?xml version="1.0" encoding="UTF-8"?>
<oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<plugins pluginpoint="oracle.iam.platform.kernel.spi.EventHandler">
<plugin pluginclass="com.zeropiu.sky.custom.eventhandlers.TestUserAnonimi" version="1.0" name="TestUserAnonimi">
</plugin>
</plugins>
</oimplugins>
EventHandler.xml metadata file
<?xml version='1.0' encoding='UTF-8'?>
<eventhandlers xmlns="http://www.oracle.com/schema/oim/platform/kernel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/schema/oim/platform/kernel orchestration-handlers.xsd">
<action-handler class="com.zeropiu.sky.custom.eventhandlers.TestUserAnonimi" entity-type="RoleUser" operation="CREATE" name="TestUserAnonimi" stage="preprocess" order="1007" sync="FALSE" />
</eventhandlers>When I assign a role to a user through OIM web interface, I can see in OIM log file all System.out.println contained in initialize(), isApplicable() and BulkEventResult execute() methods. Is it correct? Can I implement my custom plugin logic now, or my starting point is wrong?
###### TestUserAnonimi - initialize
###### TestUserAnonimi - isApplicable - STARTED
###### TestUserAnonimi - isApplicable - ContextManager.getContextType(): ADMIN
###### TestUserAnonimi - isApplicable - ContextManager.getContextSubType():
###### TestUserAnonimi - isApplicable - abstractGenericOrchestration.getOperation(): CREATE
###### TestUserAnonimi - isApplicable - Printing ContextManager parameters
###### TestUserAnonimi - isApplicable - Context parameter 0: origuser - Object type is: java.lang.String
###### TestUserAnonimi - isApplicable - Context parameter 1: oimuser - Object type is: java.lang.String
###### TestUserAnonimi - isApplicable - Context parameter 2: RESOLVED_LOCALE - Object type is: java.lang.String
###### TestUserAnonimi - isApplicable - Context parameter 3: counter - Object type is: java.lang.String
###### TestUserAnonimi - isApplicable - Context parameter 4: TIME_ZONE - Object type is: java.lang.String
###### TestUserAnonimi - isApplicable - Context parameter 5: ipaddress - Object type is: java.lang.String
###### TestUserAnonimi - isApplicable - ENDED
##### TestUserAnonimi - BulkEventResult execute
Thanks,
Daniele
Edited by: 886636 on Jan 24, 2012 2:53 AM
Edited by: 886636 on Jan 24, 2012 2:53 AM

Probably I don't explain myself clearly....sorry for that!
Anyway you are right, the role of the user can change after the user is initially provisioned.
I'll try to summarize to be sure to have understood your answer and to explain my scenario more in details:
1. After user identity creation, I'll assign the role "Project Manager". Before role assignment the user has not any role. So using a pre-populate adapter I can retrieve the assigned role and compose the right userid.
2. After step 1, I need to assign another role to the user, the new role should be "External Reseller" for example. In this case the user has a role already. What I would is: basing on the role that I'm assigning (External Reseller), the pre-populate should compose the right userid. Obviously this second userid will be different from the first one and this means a new account will be created for the user. At the moment I don't care to deprovisioning the first userid.
Is it possible with pre-populate adapter?
Sorry again for my not very clear explanations.
Daniele
Edited by: 886636 on Jan 24, 2012 4:10 AM

Pulling a Record set and then using a field within that record to pull additional information from the table.

I am pulling information based on the following "If" statement;
If({JCT_CURRENT__TRANSACTION.Category} = "L"
    and "cost" in {JCT_CURRENT__TRANSACTION.Transaction_Type}
    and {JCT_CURRENT__TRANSACTION.Transaction_Date} > {@Prev Week}
    and {JCT_CURRENT__TRANSACTION.Transaction_Date} <= {@Week 1})
then
{JCT_CURRENT__TRANSACTION.Units}
This works fine and I can print it on the report with other associated fields. One of those fields is a "Cost Code" field associated with the above conditions and date set (I am pulling for one pay period week). Of these transactions, each week different "cost codes" could be available.
One item I need to figure out another formula is associated with the cost codes that are pulled, but, I need to compare them to a different date range.
Here is how I get the cost codes that were used in a specific time frame;
If({JCT_CURRENT__TRANSACTION.Category} = "L"
    and "cost" in {JCT_CURRENT__TRANSACTION.Transaction_Type}
    and {JCT_CURRENT__TRANSACTION.Transaction_Date} > {@Prev Week}
    and {JCT_CURRENT__TRANSACTION.Transaction_Date} <= {@Week 1})
then
left({JCM_MASTER__COST_CODE.Cost_Code},6) & "001"
This gives me the cost codes used in that period but changes the last three digits to be "001" (xx-xx-001).
Now, I need to take that cost code, the xx-xx-001 and compare it to a completely different date range to get an "estimate" number.
My problem is that, because I need to use a date range in the original conditions, even after I truncate the cost code, for some reason, it stays associated with that date range.
How can I use a field from a group of records based on date, but, associate it with a competely different date range.
I hope this is clear, I am having a real hard time with this, I am fairly new, but have pretty normal working knowledge of basic formulas, etc...
Thanks, Mike

Please re-post if this is still an issue

Customize portal "Help" link based on user roles

Is there a chance to customize the Help link URL in Masthead iView based on user roles? The use case we have is that the "Help" should be different for users of the purchasing company from those of the supplying company.
Thanks.

Hello Jay.
This is a multi step process.
Step 1 : Create 2 desktops with everything as same but different mastheads.
- Copy your existing desktop and paste it in your working folder in PCD (Not select Delta link)
- Now download masthead par file.
- Modify your masthead par file where you will disable help link. Rename you masthead file (newMasthead.par) and export it from NWDS. Now import it in portal.
- open your framework page in desktop2. Just add your new masthead in it. Enable the new one and disable the existing one.
Step 2 : Create 2 groups of users. (First one belong to users who wish to see help link . i.e existing desktop) (Second of thoese users who do not have to see help link i.e. newDesktop)
- Assign users to appropriate groups.
- Assign same roles to both groups.
Step 3 : Modify main rule section in PCD.
- If group = HelpLinkUsers Then Desktop1
If group = NoHelpLinkUsers Then Desktop2.
You may find above process bit tedious and lengthy.
But if you wish to further customize your portal then this will be needed one day.
If you find problems in implementing any step then please search in google or SDN.
Please revert back on any specific question on above approach you may face while implementing.
Thanks

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

CRM 2011: Can you control which form is used based not security roles, but on a field value?

I see that you can control which form is used based on security roles, but can you control it based on other field values? I'd like a new record to use a different form until a given status is updated. I have a status of draft and active. So
it would be nice if I could use form1 for those in draft, form2 for those that are active. But I only see where you can control that via the security roles.
I can code all of this via JavaScript, but having the ability to use two separate forms would be nice. Is that even possible.
Best regards,
Jon Gregory Rothlander

Hello,
Recheck following article - http://gonzaloruizcrm.blogspot.com/2014/11/avoiding-form-reload-when-switching-crm.html
Dynamics CRM MVP/ Technical Evangelist at SlickData LLC
My blog

Restricting values of a dropdown based on user roles

Hi,
Is it possible to restrict the values of a custom metadata dropdown based on the user roles (assuming only 1 role is assigned to each user)? Say, based on the role assigned to a user, he/she should see only 3-4 values out of 10 values in a dropdown on the checkin page. Please suggest.
Thanks.

You can get pretty close out of the box using some configuration manager applet voodoo
1)First off create a Table that will contain the options for your list. Create the columns e.g. label and id and then also create a column called dSecurityGroup
2)Add a view based on the table you just created, choose the Security tab and select "Use standard document security"
3)Add some values to your view - make sure that you populate the dSecurityGroup column with real values of security groups
4)Once it is all published, have a look at the checkin and search screens. You should find that UCM will evaluate the options in the same way it would documents - based on the dSecurityGroup value you applied to the row - e.g. you will see an option on the search screen if you have at least R permissions, you will see an option on a checkin screen if you have at least RW permission
Try it out :-)

Process InfoPackage based on a condition in Process Chain

Hi,
I would like to include a Function Module in my Process Chain.Based on the output of the Function Module (example Flag - 'A','B','C') I would like to load data from Infopackage.
Could you please suggest the best possible solution.
Thanks,
Nimai

then you need a decision step...
as you want to use a FM to get the outcome, you can't use the standard decision step as you can only use a formula...
so you need to implement a new decision step...look on sdn for the how to paper 'Enhanced Decision Process Type for BW Process Chains'...
this how to paper will lead you to create a process step of the type decision but you can use abap forms (take a look at it and it will become clear)...once you have done this, drag/drop the step in your chain. within the variant, you can define the result of the if, elseif, else...you can add as much elseif as you want (a lot in any case)...you need to create for every 'if' the form using the FM... back in the process chain you can link this step to all the infopackages, and indicate the result of the decision step leading to the infopackage execution...
that's the nice way...
the easy way :
create for every infopackage a single process chain (you can easily copy them)...they should start after event EV_A, EV_B, and so on...every chain after another event...now create an abap program and call the function module...now depending on the outcome of your FM you can trigger one of the events and the corresponding chain will start, leading to the correct infopackage being loaded.
look on abap forum on more info about event triggering, how to create event,...

How to determine the Parent process information in Oracle BPMS 10g

Hi ,
I am trying to retrieve the parent process information given the instanceId and Process Id of an instance of a process from a different process.
I am getting the instanceId of the instance in workspace using the Fuego.Papi.ProcessService and by creating the Filter.
I tried using the ProcessInstance.parent but it needs to be instantiated using the instance details of my referred instance, which i am not able to do.
Can some one shed some light on how to get the parent process details from the referred instance.
Thanks,
shravan.

Hi,
If you mean to increase the request timeout i.e the time when a request is submitted to the server and the response is sent by the server it can be done in httpd.conf file located in $OracleHome/Apache/Apache/conf directory.
The attribute to be used for setting timeout is "Timeout". By default teh value is 600 seconds i.e 5 minutes.
After making these changes , run command dcmctl updateConfig -ct OHS and restart the HTTP Server. Please note these commands need to be run only if the httpd.conf changes are done through text editor.
Hope this helps.
Smita

Implementing authorization based on database roles

Hi,
I am trying to implement authorization in my sample jdeveloper application.
I have the list of users stored in LDAP and my database table contains the roles for those users.
Now how can I get the roles from the database table and implement authorization based on the roles?
I am using jdev 11 and weblogic 10.3
Thanks

Hi,
Checkout [this post|http://forums.oracle.com/forums/thread.jspa?threadID=928304]
Sireesha

Planning Data Pull process failed with timeout error

Hi Experts,
Version: Oracle apps 11.5.10.2
Issue: Planning Data Pull process failed with timeout error
message in the log file as follows,
The Request id : 90018907 has Phase : COMPLETE and Status: ERROR
Concurrent Message : Timeout error.
There is an Unknown error in the Worker.
Planning Data Pull process failed.
+-------------------------------------
Please advice what could be the problem. I submitted, standard data collection programs with 900 mins and 8 workers.
Refresh Collection Snapshot completed without any issue

Please see these docs.
Data Collection Fails Because Of Time Out Timeout error [ID 339968.1]
OPM-ASCP: Data Collection Timeout Error [ID 601539.1]
STD COLLECTION FAILING AT PLANNING DATA PULL WITH TIMEOUT ERROR [ID 978472.1]
Data Collections is Failing - All Errors - First Diagnostic Steps [ID 207644.1]
Troubleshooting Errors with ATP/Planning Data Collections [ID 1227255.1]
MSCPDC PLANNING ODS LOAD ERRORS WITH TIMEOUT ERROR - POOR PERFORMANCE [ID 417633.1]
Thanks,
Hussein

Content delivery in portal based on user roles ?

Portal Server new bee...
Please can anyone point me to guides/url where i can look to enable content delivery in a portal based on user roles and how to establish SSO.
I have installed Portal Server6.0 and iplanet Directory Server Management Edition installed.
I did go through PS Development guide and got some sample containers up and running in the portal.
Thanks.

For the role-based delivery, Comment 1 sends you in the right direction. Here are a couple things to keep in mind as you read through the customization guide.
The basic gist of what you need is to define your organization profiles with all the services defined at the org level. Then you can define simple profiles at the role level. These will probably focus around the selected and available attributes on the table containers.
Then you might want to pay particular attention to the merge, lock, and propogate attributes. These will allow you to define how the role affects the availability of channels (does the role add, remove, or force the channel?). The easiest thing to do is probably to start with a core group of channels, and then have each role define additional channels that are of interest and should be added to the selected/available lists.
Having roles remove channels will make matters a little more confusing and harder to maintain.

Federation, remote role assignment based on ABAP roles on producer

Hi all,
We have implemented the federated portal solution for our ESS users. We use the ABAP stack of the producer portal as user store for consumer and have no problems in assigning portal roles on our consumer based on ABAP roles in the backend (displayed as groups in the portal).
Now we want to add some extra functionality (eg SRM and eRec) and we encounter some problems. These systems all have their own ABAP stack as user store. We have maintained the functional authorization model in the ABAP roles for instance in SRM. So an example:
System I: ABAP + JAVA --> ECC 6.0
Here we have the standard R/3 functionality and the producer portal (A) installed. Roles created on producer portal and assigned based on ABAP roles.
System II: JAVA --> NW 7.0 Portal
Our consumer portal (B) where we use roles created on the producer portal (A) on System I.
System III: ABAP + JAVA --> SRM
Our SRM system with SRM producer portal (C). In the ABAP stack of this sytem the functional SRM roles have been assigned to the users. We have created functional SRM Portal roles in order to use remote role assignment on consumer portal (B).
+PROBLEM+
We want to remotely assign portal roles created on the SRM Producer (C) to users on the consumer portal (B), based on the ABAP role assignment in the backend of system III. How can we achieve this in a fast and efficient way?
Looking forward to your ideas. Anything helpfull will be gladly awarded with SDN points.
Best regards,
Jan Laros

Jan,
Interesting question. Let me share my experience and hope that's of some use to you.
We started off federating corporate NetWeaver Portal (lets say B, parallel to your convention) as consumers to BI Portals (Lets say A).
- B's UME points to Active Directory
- A's UME points to BI ABAP user store
- User ids are identical in both systems
We ran into the problem of dual administration ((de)assigning portal role on both portals instead of just one) for a long time. The issue was because of different reasons at different times as we patched B's and A's. At one point we were on SP15 on both portals and we were told by SAP that RRA can be done on B for remote roles and the assignment propagates to A automatically if the following configuration is set up on both A and B.
- A's permissions are relaxed allowing "Everyone" group checked for "End User" access as per ([http://help.sap.com/saphelp_nw04s/helpdata/en/43/2236fc0b413fe1e10000000a11466f/content.htm|http://help.sap.com/saphelp_nw04s/helpdata/en/43/2236fc0b413fe1e10000000a11466f/content.htm]
However, we chose not to do the permission relaxation as enabling "Everyone" group with "End User" access can allow anyone to launch an iView (if the URL is known somehow) and the user would be able to see the layout of the iView, which can include text, etc. The user won't be able to access any data though, however, there is certain compromise on security which we decided that its not okay. So, we digressed in SAP's suggested practice because of security reasons.
Today we, manage security on B using Active Directory groups and on A using Java groups (ABAP roles).
In your case, I suggest investigating the option of relaxing the security on producer portal like in the above link. If you think its okay, all you have to do is, provision users on B by assigning remote roles from C and A.
Either my story is applicable or I must have got you totally wrong,
Kiran

Processing Cube in BIDS Removes Roles

Greetings
Why is it when I do a full cube processing in BIDS the Roles are deleted? Is there a way to avoind this/
kam

When you fully process the cube you are processing all properties, this includes roles. When you first deploy and process the cube the properties and meta-data is written to the instance of analysis services that are specified in the properties of the project/deployment. When you add roles to the cube when using the SQL Server Management Studio then the project remains unchanged, but the roles are added to the AS database. You have two options:
1. From the project include the roles in project and then deploy, this will include them in the project and will persisted during deployment.
2. When making changes from BIDS, rather than opening the project file, which is most often stored locally, go to:
a. File>Open>Analysis Services Database
b. Browse to the analysis services instance and database and open
The second option will open the entire database, including the roles within it, in BIDS. This option can also create some inconsistency in change control. I would highly recommend implementing specific policies regarding this, possibly using source safe and checking the project in rather than directly accessing the production AS database.
Hope this helps.

Pulling process information based on overseer role

Similar Messages

Maybe you are looking for