Purcahse Req WF - Send email to appoval

Hi,
I've created my Organizational plan (PPOCW) and I would like to send an email (to outlook) to the appover that is the immediatilly superior of the creator.
Then I'm using the WS00000038 template and after the Event (PR release item) I added the step Send email, but after the creation of purchase requisition nothing happens.
I would like to know how to configure the step Send Email:
- Which recipeint should I use?
- Which task should I use?
Obs: In teh MM configuration of the release procedure I'm using Object type - C (Job).
Thanks in advance,
Guiza

Hello,
You can use the SendMail step in Workflow. Use role AC168 to find the superior of the creator.
regards
Rick Bakker
Hanabi Technology

Similar Messages

IPad2 iOS 6.1 cannot send email - password not saved

I recently upgraded to IOS 6.1 and it must have been around that time that I started receiving errors when trying to send emails. I can recieve fine, but cannot send. The error I get is "A copy has been placed in your Outbox. No password provided. Please go to Mail Account Settings and enter a password."
When I add the password to the outgoing server it verifies. I try to send and get the same message. When I go back to the server settings the password is no longer there. Why won't my password save and how can I fix this? I never used to need a password but for some reason it won't work now without it.
I was able to get it to work once from home with the password but now it won't work anywhere. If i try adding a username as well as the password it just gives me an error that the user name is invalid.
I have checked all my smtp and outgoing server settings, added multiple servers (primary, remote, etc....) and validated ports, changed my webmail password with shaw (to ensure req's for mobile access were met), tried deleting the account and setting it up again, etc... Everything short of actually restoring my ipad, which I don't want to do unless there is no other way.
Also as an FYI - I have 2 mail accounts with Shaw but use one only to send mail (in the process of removing the older one). We also just moved and cannot Shaw service at home so are with Eastlink. The Shaw account is still active and will stay active and I have added both Shaw and Eastlink Server details for outgoing mail. When I'm not home, I rely on my Bell 3G connection for data.
Its very frustrating since I no longer have any other way to email and don't have a cell phone so my main way to contact atm was via email. I am fairly certain that the issue is related to apple software and not my servers, but I'm no expert. I have read that I cannot downgrade my iOS as well.
Any ideas or suggestions are welcome.

Ya i tried that (see above). No such luck :(. Thx tho.

Sending Email using java code

I am using the following code to send an email from my java servlet but the problem is, when it is on its own it works fine but as soon as I combine it with some code to submit data into a postgres database it sometimes does not perform could it be because im missing some close statements??
//grades to submit grades starts here
 String [] paramValues = req.getParameterValues("Mark");
 for(int i=0; i<paramValues.length;i++)
 String [] paramValues2 = req.getParameterValues("StudentExamNumber");
 String Mark = paramValues;
 String ExamNo = paramValues2[i];
 //testing purposes
 out.println("<tr><td>"+ExamNo+"</td>");
 out.println("<td>"+Mark+"</td>");
 try
 st = conn.createStatement();
 query = "SELECT StudentNo FROM STUDENTS"+WebCourse2+ " where ExamNo='"+ExamNo+"'";
 rs = st.executeQuery(query);
 if(rs !=null)
 while(rs.next())
 String StudentNo=rs.getString("StudentNo");
 //testing purposes
 //out.println("<td>"+StudentNo+"</td></tr>");
 here
 st4 = conn.createStatement();
 query4 = "select MAX(entryno) from STUDENTRESULTSFORCOURSE"+WebCourse2+" WHERE STUDENTNO='"+StudentNo+"'";
 rs4 = st4.executeQuery(query4);
 if(rs4 !=null)
 while(rs4.next())
 EntryNo = rs4.getInt(1);
 }//end rs4 while
 rs4.close();
 }//end rs4 if
 out.println("<tr><td>EntryNo= "+EntryNo+"</td>");
 EntryNo = EntryNo + 1;
 out.println("<td>NewEntryNo= "+EntryNo+"</td></tr>");
 //Submitting grades to database/
 st3 = conn.createStatement();
 insert = "insert into STUDENTRESULTSFORCOURSE"+WebCourse2+" (StudentNo, CourseCode, AttemptNo, ExamMark, EntryNo, EnteredBy) values ('"+StudentNo+"', '"+WebCourse2+"', 1,'"+Mark+"',"+EntryNo+",'"+WebUsername2+"')";
 st3.executeUpdate(insert);
 }//end rs while
 rs.close();
 }//end rs if
 }//end try
 catch (SQLException e)
 System.out.println("Error: "+e.getMessage());
 }//end for loop
 //code to submit grades ends here
 //code used to send email starts here
 String m_sHostName="localhost";
 int m_iPort=25;
 try
 // Open port to server
 smtpSocket = new Socket(m_sHostName, m_iPort);
 os = new DataOutputStream(smtpSocket.getOutputStream());
 is = new DataInputStream(smtpSocket.getInputStream());
 if(smtpSocket != null && os != null && is != null)
 // Connection was made. Socket is ready for use.
 System.out.println("Connection was made. Socket is ready for use.");
 try
 // The email address that the server
 // you are using know user as.
 os.writeBytes("MAIL From: <[email protected]>\r\n");
 // Who the email is going to.
 os.writeBytes("RCPT To: <[email protected]>\r\n");
 //send a CC to:
 os.writeBytes("RCPT Cc: <[email protected]>\r\n");
 // add the message and the
 // header of the email to be sent out.
 os.writeBytes("DATA\r\n");
 os.writeBytes("X-Mailer: Via Java\r\n");
 os.writeBytes("From: "+WebUsername2+"<[email protected]>\r\n");
 os.writeBytes("To: Marie <[email protected]>\r\n");
 //Again if you want to send a CC then add this.
 os.writeBytes("Cc: ProfCuthbert <[email protected]>\r\n");
 String sMessage = "ELECTRONIC ENGINEERING EXAM COLLATION SYSTEM EMAIL\n\nThe results for the following course have been submitted by the following member of staff\n\nCOURSE: "+WebCourse2+"\n\nSUBMITTED BY: "+WebUsername2+" \n\nPLEASE LOCK COURSE NOW IN ORDER TO PREVENT ANY FURTHER SUBMISSIONS TO BE MADE BY USERS.";
 os.writeBytes("Subject: A SUBMISSION HAS BEEN MADE FOR COURSE "+WebCourse2+"\r\n");
 os.writeBytes(sMessage + "\r\n");
 os.writeBytes("\r\n.\r\n");
 os.writeBytes("QUIT\r\n");
 // Now send the email off and check the server reply.
 // Once an OK is reached you are complete.
 String responseline;
 //for testing purposes
 //out.println(responseline = is.readLine());
 while((responseline = is.readLine())!=null)
 //for testing purposes
 //out.println("responseline= "+responseline+" ");
 //out.println("responseline.indexOf(Ok)= "+responseline.indexOf("Ok"));
 if(responseline.indexOf("Ok") != -1)
 break;
 if(responseline.indexOf("Ok") == -1)
 confirm=1;
 if (confirm==1)
 out.println(" the marks have been submitted thank you");
 catch(Exception e)
 { System.out.println("Cannot send email as an error occurred.");
 out.println("Cannot send email as an error occurred.");
 catch(Exception e)
 { System.out.println("Host " + m_sHostName + "unknown"); }
Does anyone know what the problem is??
thanks
tzaf

i close them later in the program. Ive made sure they are all closed I have a feeling that it could be coming from here....
//code used to send email starts here
 String m_sHostName="localhost";
 int m_iPort=25;
 try
 // Open port to server
 smtpSocket = new Socket(m_sHostName, m_iPort);
 os = new DataOutputStream(smtpSocket.getOutputStream());
 is = new DataInputStream(smtpSocket.getInputStream());
 if(smtpSocket != null && os != null && is != null)
 // Connection was made. Socket is ready for use.
 System.out.println("Connection was made. Socket is ready for use.");
 try
 // The email address that the server
 // you are using know user as.
 os.writeBytes("MAIL From: <email address>\r\n");
 // Who the email is going to.
 os.writeBytes("RCPT To: <email address>\r\n");
 //send a CC to:
 os.writeBytes("RCPT Cc: <email address>\r\n");
 // add the message and the
 // header of the email to be sent out.
 os.writeBytes("DATA\r\n");
 os.writeBytes("X-Mailer: Via Java\r\n");
 os.writeBytes("From: "+WebUsername2+"<email address>\r\n");
 os.writeBytes("To: hello<email address>\r\n");
 //Again if you want to send a CC then add this.
 os.writeBytes("Cc: hello <email address>\r\n");
 String sMessage = "ELECTRONIC ENGINEERING EXAM COLLATION SYSTEM EMAIL\n\nThe results for the following course have been submitted by the following member of staff\n\nCOURSE: "+WebCourse2+"\n\nSUBMITTED BY: "+WebUsername2+" \n\nPLEASE LOCK COURSE NOW IN ORDER TO PREVENT ANY FURTHER SUBMISSIONS TO BE MADE BY USERS.";
 os.writeBytes("Subject: A SUBMISSION HAS BEEN MADE FOR COURSE "+WebCourse2+"\r\n");
 os.writeBytes(sMessage + "\r\n");
 os.writeBytes("\r\n.\r\n");
 os.writeBytes("QUIT\r\n");
 // Now send the email off and check the server reply.
 // Once an OK is reached you are complete.
 String responseline;
 //for testing purposes
 //out.println(responseline = is.readLine());
 while((responseline = is.readLine())!=null)
 //for testing purposes
 //out.println("responseline= "+responseline+" ");
 //out.println("responseline.indexOf(Ok)= "+responseline.indexOf("Ok"));
 if(responseline.indexOf("Ok") != -1)
 break;
 if(responseline.indexOf("Ok") == -1)
 confirm=1;
 if (confirm==1)
 out.println(" the marks have been submitted thank you");
 catch(Exception e)
 { System.out.println("Cannot send email as an error occurred.");
 out.println("Cannot send email as an error occurred.");
 catch(Exception e)
 { System.out.println("Host " + m_sHostName + "unknown"); }
 //code used to send email ends here
do i need to close is and os?
thanks
tzaf

Regarding sending Email as attachment

Hi guys.
One unique issue.
I meed to send a file as an attachment to one perticular address. Got to knowt that some function module like So_attmail would work. But that sends the content as body of the mail. But i want the file to be sent as attachment. Could someone help me this plz.
If possible also let me know what are the parameters that i need to pass in short.
Thanks in advance.
Abhi.

Hi Abhi,
Have a look at this example:
http://www.sap-img.com/abap/sending-email-with-attachment.htm
http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
http://www.sap-img.com/fu016.htm
1. We can send files with attachment.
However, There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
PS : Reward points if helpful
Thanks,
Ramya.

Send email with attachments from oracle procedure

This is my procedure
CREATE OR REPLACE PROCEDURE send_parvo_email IS
v_header varchar2(200);
v_file UTL_FILE.FILE_TYPE;
v_count Number;
v_letter Varchar(50);
req UTL_HTTP.REQ;
req1 UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
resp1 UTL_HTTP.RESP;
url VARCHAR2 (2000);
url1 VARCHAR2 (2000);
val varchar2(4000);
val1 varchar2(4000);
p_start_date DATE;
p_end_date DATE;
v_shipment_id varchar2(30);
--v_start_date DATE;
--v_end_date DATE;
Cursor C1 is select shipment_id
from ship_hdr
where trunc(create_time) = trunc(sysdate);
BEGIN
v_letter := 'r_parvo_b19_rpt';
select trunc(sysdate-7),trunc(sysdate-2)
into p_start_date,p_end_date
from dual;
Open C1;
Fetch C1 into v_shipment_id;
Close C1;
save_parvo_email;
UTL_HTTP.SET_PROXY (null,null);
url :=
utl_url.ESCAPE
( 'http://hbc-maroon.heartlandbc.org/reports/rwservlet?userid=test/[email protected]&subject="Parvo Testing Report"&destype=mail&FROM=[email protected]&desname=[email protected]&desformat=PDF&ENVID=QA&report='||v_letter||'&start_date='||p_start_date||'&end_date='||p_end_date);
req := UTL_HTTP.BEGIN_REQUEST (url);
UTL_HTTP.SET_HEADER (req, 'User-Agent', 'Mozilla/4.0 Oracle');
resp := UTL_HTTP.GET_RESPONSE (req);
UTL_HTTP.READ_LINE (resp, val, TRUE);
UTL_HTTP.END_RESPONSE (resp);
Update ship_dtl
set shipment_printed = 'Y'
where shipment_printed is null
and trunc(coll_date) between p_start_date and p_end_date;
commit;
END;
This works fine and sends email with the report as attachment. The attachment is report_name.pdf. I want to change this attachment to be named as shipment_id.pdf. Is this possible and how?
If there is any other method to sent email with attachments . ie run the report and attach the report to the email not as report_name.rdf but shipmenmt_id.rdf

This is my procedure
CREATE OR REPLACE PROCEDURE send_parvo_email IS
v_header varchar2(200);
v_file UTL_FILE.FILE_TYPE;
v_count Number;
v_letter Varchar(50);
req UTL_HTTP.REQ;
req1 UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
resp1 UTL_HTTP.RESP;
url VARCHAR2 (2000);
url1 VARCHAR2 (2000);
val varchar2(4000);
val1 varchar2(4000);
p_start_date DATE;
p_end_date DATE;
v_shipment_id varchar2(30);
--v_start_date DATE;
--v_end_date DATE;
Cursor C1 is select shipment_id
from ship_hdr
where trunc(create_time) = trunc(sysdate);
BEGIN
v_letter := 'r_parvo_b19_rpt';
select trunc(sysdate-7),trunc(sysdate-2)
into p_start_date,p_end_date
from dual;
Open C1;
Fetch C1 into v_shipment_id;
Close C1;
save_parvo_email;
UTL_HTTP.SET_PROXY (null,null);
url :=
utl_url.ESCAPE
( 'http://hbc-maroon.heartlandbc.org/reports/rwservlet?userid=test/[email protected]&subject="Parvo Testing Report"&destype=mail&[email protected]&[email protected]&desformat=PDF&ENVID=QA&report='||v_letter||'&start_date='||p_start_date||'&end_date='||p_end_date);
req := UTL_HTTP.BEGIN_REQUEST (url);
UTL_HTTP.SET_HEADER (req, 'User-Agent', 'Mozilla/4.0 Oracle');
resp := UTL_HTTP.GET_RESPONSE (req);
UTL_HTTP.READ_LINE (resp, val, TRUE);
UTL_HTTP.END_RESPONSE (resp);
Update ship_dtl
set shipment_printed = 'Y'
where shipment_printed is null
and trunc(coll_date) between p_start_date and p_end_date;
commit;
END;
This works fine and sends email with the report as attachment. The attachment is report_name.pdf. I want to change this attachment to be named as shipment_id.pdf. Is this possible and how?
If there is any other method to sent email with attachments . ie run the report and attach the report to the email not as report_name.rdf but shipmenmt_id.rdf

Cannot send email from yahoo account on iPhone 5

I just got an iPhone5 and I couldn't set up my Yahoo email as "yahoo"--it would not allow me to complete the process despot multiple attempts. I had to set it up as an "other" account. I can receive and read emails on my phone, but when I reply those messages will not send. They go to the outbox and an error message pops up that says" the email account has been rejected by the server" Does anyone have advice on either issue: setting up yahoo properly and/or sending email from phone?

outgoing mail server
SMTP - Yahoo! SMTP Server
primary server
Yahoo! SMTP server - ON
server port 465
That's what I have for my yahoo account.

Cannot send email from non .mac server

I am only able to send/reply emails using my .mac address. My 2 other server addresses keep giving me the following message.
"Cannot send mail. One of the recipient addresses was invalid".
How can I fix this?

You should be able to send email from Safari, however I do wonder why you wish to do this and whether there is something inherently wrong with using your mail app and your iCloud address.

Cannot send email from MobileMe account

Apple recently pushed out an update to the MobileMe calendar. Since upgrading my account, I am unable to send emails from Firefox4 (current version) in Windows. The page sits indefinitely at a loading screen. Apple Support won't help because it isn't an issue with Safari. Anyone else have this issue?

When using the MobileMe account preset to create the account, the SMTP server is created with 587 as the SMTP server port, which can't be changed when using the MM account preset to create the account.

Cannot send email from Verizon to a specific domain using the web UI

I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?

rhodeislandred wrote:
I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?
What is the domain that is giving you the error?

Cannot send email from Powershell on Mailbox Role

Hi,
I am trying to send an email from Powershell on Mailbox role of Exchange server. I have installed Symantec Mail Security on Mailbox Role.
When I try to send email using Powershell, I got the following error.
PS C:\a> Send-MailMessage -to [email protected] -Subject "Alert Closed.. Service is restarted on Computer" -from
[email protected] -Body "The service was found stopped on Computer it was started automatically and it is now running normally." -bodyasHTML -priority High -SmtpServer smtp.domain.com
Send-MailMessage : Service not available, closing transmission channel. The server response was: 4.3.2 Service not active
At line:1 char:1
+ Send-MailMessage -to [email protected] -Subject "Alert Closed.. Service is ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.Mail.SmtpClient:SmtpClient) [Send-MailMessage], SmtpException
+ FullyQualifiedErrorId : SmtpException,Microsoft.PowerShell.Commands.SendMailMessage
This command is working fine on every server except exchange server (CAS, Mailbox). Firewall is off on the servers.
Any help will be highly appreciated.
Regards,
Anees

Hi,
Please check the similar thread .
http://social.technet.microsoft.com/Forums/exchange/en-US/ef699832-8da9-4709-9a50-c6223b13bd95/sendmailmessage-returns-the-server-response-was-432-service-not-available?forum=exchangesvrsecuremessaginglegacy
smtp server (smtp.domain.com) is rejecting the connection from the
Mailbox role of Exchange server.
So please allow the mailbox server ip address on the smtp server's (i.e. smtp.domain.com)
receive connector to get it done
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Cannot send email from an iPhone to a Outlook group.

Hi,
My question is simple and I'd like an exactly same answer : Can iPhone users send emails from their iPhone's to one or more groups created in Outlook?
This is my situation: our organization is using iPhone to provide email, calendar, contact, task etc. to some of their employees. We are using Airwatch MDM Agent on user's iPhone because we have an Airwatch server in place. I have an user and she has an iPhone 5 and she has created some groups in Outlook but these groups are not reflected in her Contacts in the iPhone. I have update her phone with the latest update, although I was almost sure that this was not the issue, then I've found some interesting posts on internet saying that this was a known problem for the users with the previous iOS but I thought this might has been corrected with the iOS, apparently not.
Also I've tried ''the trick'' that is posted on several forums with the iCloud but neither so it's working. I am looking for a straight answer, if this works or not on iPhone's?
Thanks,
Sebastian.

There indeed ARE apps in the app store that will do what you want. Just search and find the one that best fits your needs.

Cannot send email from the Mail App?

I've had an izymail subscription for 1 year and just renewed it last week. I could never send an email from my Mail App without a window popping up stating "izymail cannot connect to the server" and the sending bar (along the bottom of the screen) just freezes and will not send.
I've a Hotmail account linked up to izymail. Anyone know how to fix this problem?

I fixed my problem - I deleted my email account on my iPhone, then tried to setup a new account. I had a few problems setting it up. It wouldn't recognize the incoming or outgoing servers and I lost my email altogether for a few hours. Then I changed every setting possible and finally figured out that I had 2-3 "Other SMTP Servers" as well as my "Primary Server". Once I deleted the Other SMTP Servers, my email worked and i'm able to send emails now!
I also think changing the "Server Port" number helped solve my problem also, and making sure "Use SSL" was turned off.

Cannot send email from sbcglobal account

Does anyone from Apple take what's discussed here back to a department that is useful in getting bugs fixed? I hope so. I am making this post although I know that NONE of you have an answer to my question that is satisfactory. I will come back to this thread as often as possible in hopes that the next update my finally fix my issue. For the love of all things, I just want to send email via IMAP like this article says I should:
http://docs.info.apple.com/article.html?artnum=306074
To be clear for you all, I've set up my sbcglobal account as detailed above...ie, using yahoo. This worked great for me until I applied the 1.0.1 update. Since then, I cannot send an email to save my life. Though receiving has worked just great.
I am well aware that I can set up my sbcglobal account using pop3/smtp. This is an annoying work around to me, not a solution. If I set it up using pop3, I loose all kinds of ability I had with IMAP. This is a documented feature that is supposed to work on the iPhone, and it doesn't. I see no reason I should have to go back to an older technology/protocol.
I've submitted multiple comments on the iphone about this. I just pray that someone at Apple fixes this soon. I'm so frustrated, and of course way past my point of returning the dang phone.

Here's the response I received from Yahoo following the link you posted. As usual, nothing that moves the problem closer to a solution. First, there is an attempt at deflecting the problem by pointing out all the other great services Yahoo offers. Note the operative word "some". That's the whole reason I am writing the note. I already know that "some" of the services are working. I'm wondering about the one that doesn't so this doesn't help. Next comes pass the buck. Go talk to Apple about it. No comment on that one, it speaks for itself. And finally, if none of that works please give me more information. I'll call that reflection. So now its back to me. I think I'll take the ball and go home. For what its worth the response is below:
I understand that you are having issues with the Yahoo! Mobile service.
I understand that your sbcglobal.net accounts are not working with the
IMAP push email option on your mobile device.
Allow us to inform you that you are able to access some of Yahoo!s most
popular services on this device - Yahoo! Mail, Yahoo! Address Book,
Yahoo! Weather, Yahoo! Finance and Yahoo! oneSearch. If you are looking
for assistance regarding your Yahoo! customizations featured in the
Apple iPhone widgets, please contact Apple Care at:
- URL: www.apple.com/support/iphone or
- Phone: 1-800-MY-IPHONE or
- go to www.apple.com/iphone for more information.
However, if you are still encountering an issue with our service. In
order for us to better understand this issue we will need some
additional information:
- The text of any error messages received
- Exact steps taken that lead up to this event
If you can describe it in more detail or other pertinent information,
we'll be happy to help in whatever way we can.
Thank you again for contacting Yahoo! Mobile Tech Support.
Regards,
Timothy
Yahoo! Mobile Tech Team

Cannot send email from iPhone5--calendar syncing issues also

I have an iPhone 5 and am not currently using iCloud. I have 3 email accounts.
The first is a yahoo email account--and it both receives & sends emails just fine.
I use Outlook for the other two email accounts (one is an IMAP and the other is a POP). Both receive email, but I cannot send out emails from my iPhone. When I try to send an email from either account, I get this message:
"A copy has been placed in your Outbox. The sender address "[address I used]" was rejected by the server.
Also, I don't know if it is related, but my iPhone calendar isn't syncing with Outlook. I add an appointment on my iPhone or in Outlook, and it won't appear in the other location (Outlook/iPhone).
Thanks for your help.

Check your settings, maybe the mail index is at fault.
Setup Wizard and troubleshooting tips:
http://www.apple.com/support/mail
Also has a link to Mail community section.

Cannot send email from scanned pages

I am having trouble with the updated HP remote app on Ipad, since the update I can scan the pages in, but then cannot send them via email. This is qute important because i work remotley from the office and rely on getting my design drawings in on a nightly basis
please help

cannot send email from scanned pages

Purcahse Req WF - Send email to appoval

Similar Messages

Maybe you are looking for