Purchase order does not update tax code in info recode ?

Hi Expert,
Please help me ...........
I have 2 problems.
1. I created PO and tick Infoupdate at ME21N but tax code doesn't update to info record ?
2. How to tax code can be defaulted into PO line items by I don't want create info recode ?
Thanks,

Hi,
Pls. find below the answer for your query..
"Because. the condition in p.o is time independent. So, condtion will not update in info record also see info update indicator in p.o material data tab."
Hope it will clarify your doubts.
Award. if helpful.
Regards
Rifaie.M

Similar Messages

40000006573 purchase order does not exist

hi
40000005673 purchase order does not exist

true, it doesn't exist in my system either...
Please spend a LITTLE more time on your..question if you expect help
if I had to support you in this case the first thing I would do would be to double check that the number you entering is correct
me23n
migo
If you know the number is correct and you get the same error from both t-code I would believe the message
if the number may be incorrect search for the correct number with me2n, many options to refreence for P.O. search with me2n

MIGO error 'Purchase Order does not contain a confirmation control key'

Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarity

Hi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro

Error of PO - "Purchase Order Does not exists"

Dear Experts,
Here i am facing one error of Purchase Order Creation and its further processing.
I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
Also in ME2M (PO list display) and Me23N (Display PO),
system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
Here is no matter of release strategy, because, PO release is not configured.
Dear Experts, Please guide me on the issue !
Thanks in advance !!!!

there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
This can happen if the number range was reset (or transported from a developement system).
But transaction SM13 gives you all the details.
There you see a line for each posting failure. Double click this line again to get more details.
There you will certainly find a line in red that indicates in which function the failure ocured.
Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.

Error in MR11: One or more purchase orders were not updated

Dear Gurus,
While posting MR11 for a account assigned purchase order i'm facing a error as "One or more purchase orders were not updated" under message ID CKMLGRIR 003.
Diagnosis: An error occurred during the update. As a result, an entire processing package of purchase orders could not be cleared.
I checked with the PO and it looks correct.
What may cause this issue? I'm using 4.6C release.
Thanks in advance.
Regards,
RathiM

Please check the SAP note below :
843022 MR11: Error log, purchase order number is missing

Purchase Order history not updating in my STO

Dear Experts,
We are doing stock transfer order internally for FERT and *BOUGHT OUT * items. Now at the time of delivery through VL10B all bought out items are appear in outbouddelivery but FERT item material is not coming automatically in delivery. System pickes up item category as NLN but if i manually added FERT material at the end system picks up item category as ULN & purchase order history also not updated in STO.
Also in MD04 system is showing reservation against STO number & the result is i am not able to do delivery because system is showing message as only 0 qty is available for picking
Can any body helps me in this?
Thanks
Trupti

Hi,
Define your item category setting for your Delivery..
Under SPRO>Loge-Exce>Shipping-->Define item category determination in Deliveries.
Note: You should not enter the line item manually in delivery, thus it will store the item category as DLN (DLN is for without order Reference) so it wont record any history.
Regards
GK..
Edited by: Gnana Kumar on Oct 26, 2010 1:04 PM

Purchase order number not update in purchase requisition status tab

Purchase order is created for purchase requisition. The purchase requisition is triggered through process order. When I checked purchase requisition details in ME53N status tab, status is not edited and purchase order number also not present.
Kindly let me know the possible reason for this.
Appreciate your help..
Thanks,
SAP PQ

If the PO had been created without reference to the PR, it will not be updated in the PR.
If it has been created with reference to the PR, then the PR number gets updated in the PR status.

Purchase order history not updated when invoice is posted for framework POs

Hi,
We've created a framework PO and now posted an invoice against it. The invoice was posted in the following way:
1. Go to transaction MIRO
2. Enter the PO number in the PO reference field.
3. Select the "G/L Account" tab and enter the value manually and also enter the amount at the header level and then post it.
But when I go back to the PO, I don't see the PO history tab and hence, the PO history is not visible.
Does anybody have an idea on any config that may be missing?
Any clues will be appreciated.
Regards,
Lakshmi

Hi
Did you refer to the same Framework purchase order while posting the invoice?
Invoice has been posted succesfully and number generated? If yes then check in MIR5/MIR6 the purchase order reference for that Invoice.
If everything is correct then you can see the IV number in PO history tab.
Thanks

Purchase Order History not updated properly

Hi All,
The Purchase Order History is not updated correct.
Scenario:
The Invoice is created ( MIRO) with Amount : 1001 USD but in PO History it displays 1000 USD.
The Tolerance is 1 USD ...My Requirement is that it should display 1001 in PO History.
Thanks and Regards
Mahesh

The Actual Bill Value is 1001 USD.

Purchase Order Status not updating in SUS

We are using SRM 4.0 in an extended classis setup and we are currently
have issues with Purchase Orders in the SUS system that are invoiced
and paid in SRM/R3 but in SUS they are still showing "In Process". The
vendor has verified that the Purchase Orders have been paid. My question is now that the PO's have been invoiced and still showing "In Process" in SUS is there any way to=update the status of the PO in SUS so that it displays the correct
status?

Robert,
Have you tried to implement BBP_DOC_SAVE_BADI to recognize the creation of the invoice? This document should have the reference for the PO, if you have this relation then you can update status there, in the badi implementation...
As Ramki says, you should raise an OSS message to ask for an standard way.
BR,
Gerardo.

Auto Approval EBP Purchase Order is not updating the status at the header

Hi There ,
We are facing an issue in EBP auto approval PO ,
The process level schema is set to Auto Approval (Standard 9CBUS2201_EX01_55)
During the PO creation , the standard schema is triggered and it gets approved .
The status of the PO in the Approval Tab is showing as Approved .
But in the docuemnt level the status is still Awaiting Approval .
While checking in SWI1 we came to know that an error has happened in the Task TS40007972
and the Guid ID of SRM Purchase is initial that has made the status(EV_STATUS) as initial .
The ERROR is from the below class & method.
Class: /SAPSRM/CL_WF_PROCESS_MGR_SBWF
Method:GET_PROCESS_DECISION_STATUS
Can anyone suggest to overcome this issue .It will be very usefull if anyone could suggest debugging possibility if any .
Regards,
Arun.

Have you tried notes?
1625513 - Workflow without approval is Awaiting approval status
1724251 - Workflow log error: CREATE_DECISION_SETS cannot be executed

Purchase order does not contain a confirmation control key

Hi expert
I have not set any confirmation control key in Purchasare order, still at the Migo, system is showing error at depot.
I have check the same thing with manufacturing plant, system dont show me any error.
Regard
Nabil

Hi,
I f the confirmation control key is maintained in PUR.info record is automatically will fetch into PO though you have not selected manually in PO. The CC maintained in vendor master or PIR can copy into PO. In your case please see whether inbound delivery is needed to perform GR? CC implies many types of confirmations like order acknowledgement, advanced shipping notification or confirmation of delivery dates. Please see specifically to the error. Try to know the type confirmation system needs to post GR. Thanking you.

CRM service order does not create purchase requisition

Dear experts,
CRM 5.0
We have a scenario where saving a released service order should create a purchase requisition in ECC and update the document flow. I have performed the following steps and still the PR isn't getting created.
1. Configuration in CRM and ECC for integration of service processes with logistics and maintaining the purchasing document types.
2. Maintaining standard pruchase groups in ECC table V_TMW01
3. Assigning standard purchase org to the plant
4. Making sure correct RFC destination is assigned to the logical system.
Am I by any chance missing some middleware steps as saving the service order does not even trigger anything in the system?
Thanks
Ritwik

Hi Ritwik,
Just check the following activities are maintained or not
1) You have created the subscription in SMOEAC with Site , Replication object and Service Order
     Process type in the criteria value.
2) You have maintained the customizing entry in CRM in spro for the following combination in logiistics
    Integration for Trans.Type Item Cat. Service Organization Org Unit (Service) Log. Scen.
Regards
Pavan.A

Update TAX Code in Sales Order

Hi,
1. How to update TAX code in the sales order through API. When I tried Process order API, it is not working. If any one did that, please let me know.
2. Is there any API to Just run calculate Tax for an order from PLSQL

Through my efforts, i got a solution for this queries.
Answer: There is a User_exit, will take care of New Pricing Control.
Thanks every body.

User Exit or BADI for Updating Tax code (MWSKZ) using ME21N

Hi all,
I am trying to fin out an exit or badi for Updating Tax code (MWSKZ) and Unit of Measure in transaction ME21n.
The scenario is like this...
For Purchase Orders Tax code will be defaulted from Purchasing info record or contract or parameter id for that item-vendor-plant.
If the Tax Code is not defaulted and account assignment is blank then tax code on the PO is updated according to the below mentioned table
Table
Supplying Plant/              Receiving Plant                      Tax code
Vendor/Country
Any plant/vendor/
country                           5050(NA)                               20
2300                              6700                                     E0
If the tax code on PO cannot be updated by the above table, then buyer needs to put tax code on the purchase order manually.
Thanks,
Shiva, Bangalore

Hi Siva.,.,.,
These r the exits.,..,which will be called while calling ME21N/ME22N/ME23N
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
U want to default some values while the Initial screen will come right,
while u Enter ME21N in command Prompt.,.,two exits will get triggerd,
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
If u want to Default some values u can use these two exits.,.
Try using EXIT_SAPMM06E_016.,.this will solve ur purpose.
and if the user changes some values on screen.,,and you want them to get reflected .,.,.that means if user changes and saves data .,.
While saving.,.,EXIT_SAPMM06E_012 and EXIT_SAPMM06E_013 will get triggerd
Try using EXIT_SAPMM06E_013.,,.it was somehow the same requirement as mine.,.,IN my case it worked fine.,.,
Regards
Debasish
Message was edited by:
        Debasish Das

Purchase order does not update tax code in info recode ?

Similar Messages

Maybe you are looking for