Purchase Order - Retrieve net price from Central contract (SRM or ECC)

Hi,
I'm doing a test by creating a PO referencing a Central Contract, which is made in SRM. When creating the PO, at this moment the net prices is retrieved from SRM.
Question: Is it possible to retrieve the net price from the copied contract which is in the Local ECC system?
(Customizing in ECC) SPRO -->Integration with Other mySAP.com Components >Supplier Relationship Management>Central Contract-->Price Calculation
The value what is at this moment:   SRM Pricing Immediate
Should the value be: 1 SRM Pricing Immediately Only for Hierarchy Contract Item
Regards,
Alexander

Check for existing screen layout name from below settings -
Goto SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define Document Types
Check for Field selection key against the PO Type.
Then goto below setting -
SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define screen layout at document level
Select the screen layout / Field selection key in this setting and modify the field selection group Quantity and price. Make Price and price unit as display only as per your requirement.

Similar Messages

  • Creation of Purchase order - set net price in display mode

    Hello,
    During the creation of purchase order from contract or DA (ME21N-ME59N),  I want to set the net price in display mode (under any conditions) .
    Is there a parameter setting or a point of modification to make ithis?
    Thanks for your contribution.
    JLC

    Check for existing screen layout name from below settings -
    Goto SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define Document Types
    Check for Field selection key against the PO Type.
    Then goto below setting -
    SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define screen layout at document level
    Select the screen layout / Field selection key in this setting and modify the field selection group Quantity and price. Make Price and price unit as display only as per your requirement.

  • How to Retrieve Purchase order TAX value price

    Hi,
    I want to retrieve Purchase order TAX value price from the purchase order is there any function module to retrieve this value.  Or from which table we can retrieve this value using purchase order no.
    Thanks in advance

    Hi Pradeep,
    Have you looked BAPI <b>BAPI_PRICES_CONDITIONS</b>?
    Hope this will help.
    Regards,
    Ferry Lianto

  • Net Price from the Service Order

    Hi Experts,
    I want to read the net price from the service order, in the order_read_ow FM I am getting the pricing conditions tab and getting the prices related to the conditions.
    Is there any way to get the net price directly.
    Thanks in Advance,
    Praveen

    Pls use the FM CRM_PRIDOC_READ_OW. You can pass the header GUID.

  • Back order with net price

    Dear Friends,
            As you know, we can run Back order report by t-code V_RA to show back order list. However, there are no net price in this report, i have to run VBAP  to link the price, it is so discommodious !!
            Can you please tell me are there some back order reports can show material back order amount and net price from each sales order ?
           Thanks in advance!

    Hi Friends,
        Can any one tell me ?? Thanks.

  • Purchase order with zero price

    hello
    is i possible to create pos with zero price. i have a scenario that i need to create po with out paying to vendor.
    please help
    regards

    Hi,
    If yours is a Free Goods Scenario. Then Mark the Free Item Tab ( Next to Returns) in the Purchase Order detail tab.
    Now you can create a Purchase order with Zero Price. By the time GR thru. 511 Mov. Type (Material receipt with out charge) you can receive the material.
    Reg,
    Ashok
    Rewards Welcome.

  • Purchase Order Response to being created automatically in SRM

    We have a scenario where we trigger,from portal, in R/3 to send Orders02 to XI,XI maps Orders02 to Purchase Order to XML, and  sends to a SRM system. We see a Purchase Order being created in SRM system, and ALE AUDIT Idoc is sent to the sender R/3 system sucessfully. Now, when we "confirm" the purchase order in the SRM system, this should automatically trigger a Purchase Order Response from SRM to XI and then from XI to the R/3. This part isn't working for us. Are we missing some configurations the SRM side?
    Does anyone know how to fix this problem?
    Any help is appreciated.
    Thanks.
    Karma

    Hello Jay
    Are you running Rescheduling job - T code V_V2- to confirm the back ordered items?
    Are there any status (incompletion/credit) issues or blocks for these items?

  • Condition types from Central Contract not copied into Purchase Order

    Hi,
    When creating a central contract from SRM to ECC, all the condition types are copied well.
    But when creating a shopping cart from SRM or a PO in ECC referencing the created central contract, the condtion types are not displayed in the conditions tab. (Only Condtion type PB00 is displayed.).
    What can I do to assure, that all the condition types from the contract are displayed in the PO.
    Do I have to do some customizing, or is there a SAP Notes to resolve this.
    Regards,
    Alexander

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Adopt net price from contract  if po created with referance to contract

    Hi expertise,
    Can any body so kind to find a way for the below requirement of my client:
    When PO is created with reference to contract, the net price of PO should be adopted from the contract & user should not allowed to change the net price of that PO (but allowed to change the quantity).
    Your earlier answer should be highly appreciated.
    Regards,
    Sp sahu

    Hi,
    You should make use of two very helpful options in SAP.
    They are known as the EVO parameter and the EFB parameter. These control what the user can do when generating .
    You configure a combination of flags on each parameter and so control things like "can prices be changed", can the user ONLY create by referencing a document (contract or req etc.)
    They are configured in the following menu path on SPRO
    Materials management > Purchasing > Environment data > define default values for buyers.
    This is the EVO parameter it is well worth reading the help text on the config for this. It explains that you have to then add a parameter (EVO) to the userid (in the normal way that they maintain their userid , or via the config).
    The EVO parametr is quite useful but the EFB parameter is even better, this conttrols what the user can do.
    The menu path  for the EFB is
    Materials management > Purchasing > Authorisation management > Define function authorisations for buyers.
    This is the one that will help with your problem. It works like the EVO parameter and so you add the EVO parameter to the userid and give it the code that relates to one that you have configured (careful the system is case sensitive for these codes, so use upper case or numbers for the codes when you configure them)
    In the EFB config switch on or off the flags that you want (in your case switch OFF the enter conditions and it may help to use an appropriate field selection reference key that makes the fields display only.
    Then when you allocate this parameter to the userid the settings will apply.
    try them out in your play client, they are VERY useful, especially the EFB parameter.
    Steve B

  • Net price zero for SRM service central contract in SAP ECC

    Hi
    Net price in backend ECC is showing as zero for SRM service central contrracts, all other price fieids are fine expect net prices. We have no issues for material contract.
    Does any one had similar issue of net price zero? I have tested this scenrio in couple of SRM 7 landscpape all are with similar behaviour. Is it standard?
    Your response is highly appreciated.
    Regard
    Prashanth K Saralaya

    Hi prashant
    I never tried service . but you can see this below symptom for you.I extensively worked on Material contracts.
    Are you creating contract from Process contract or Via RFQ
    Note 1272305 - Total value wrongly calculated in Contract Service lines
    Symptom
    We create a Service contract in the R/3 Backend from RFQ. During the transfer we calculate the gross price based on the quantity,price and price unit. (ie) The field ESLL-BRTWR is filled with following formula in the idoc processing. ls_e1edc20-BRTWR
              = ( is_item-price * is_item-quantity ) / is_item-price_unit.
    AS total value of the service lines is calculated based on the field NETWR which is passed as blank from SRM, during recalculation total value when we change the gross price of one of the service lines in r/3, it is required to fill this field
    till PI values are brought correctly till posting to ECC. ?
    Note 1123292 - Net Price wrongly calculated in plug-in MAP_BLAORD_SERVICES
    my experience in GOA
    Note:-
    2 set stream of DATA comes from SRM as BLOARD and COND_A ..
    Even some times when we reprocess failed IDOCS in BD87 in ECC ( comes contract data from SRM as GOA and failed due to some data validation in ECC). now data issue was fixed at Material master level. and
    if we forget to reprocess COND_A - BLOARD creates a successfull GOA but net price shows as ZERO for each material and when you post the COND_A data and correct price will be updated in ECC contract. so kindly check price data reaches or not not or price calculation failed in ECC.
    Muthu

  • Creat SC from Old Purchase Orders and Templates - Price not copied

    Hi Experts,
    When Creating SC usinfg  Old Purchase Orders and Templates interface ,
    All details are copied from Old SC to the New one , except the unit price of the item (It is created with price O )
    Please advise where we can set to copy the price also.
    Best Regards,
    Moshe

    15.02.2010 - 14:10:05 CET - Reply by SAP     
    Dear Moshe,
    Thank you for contacting SAP Active Global Support.
    I have logged on to the system and have checked the behaviour with the
    SC: 1000007814. The item in this SC is an catalog item, that means it
    has an catalog price too, which is 0 in this case.
    If you are using the copy function, the system validate the item, and
    set the original values (in this case the price) back to the standard.
    This is the standard behaviour of the system.
    Please use the catalog with price, as designed scenario.
    Kind Regards,
    Laszlo Tordai
    Support Consultant
    Active Global Support - Logistics

  • Pr created with reference to PM order , carries Net price in valuation tab

    Hi ,
    when a PR  is generated with refernce to a PM order automatically upon PM order releae, our observations are as below
    For a particulat purchasing group " Net price" is defaulted under valuation tab of PR and in some cases for another purchasing group " Do not adopt " is defaulted .
    may i know if there are any settings related to purchasing group  , user id specific for teh above values to be defaulted.
    these PM ordesr are created with refernce to contract and therefore we want theatthe Po should carry price from contract instead of carrying the price from material master .
    When the Pr is defaulted with " net price " , the po picks teh price that is maintained in material master instead of teh price in contract
    However when " do not adopt " is selected , the price in po is picked up from contract and it ignores the price in PR which comes from material master.
    we want " Do not adopt" functionality to be always on for the prices to picked only from contract.
    Kindly suggest

    hi
    try to chang eprice from item level condition tab (click on price update )
    now if this problem is persist check the inforecord for perticular pos

  • Old Purchase orders and template - Price Information not taken into account

    Hi experts,
    In MDM catalog, I have a product with 'Price Information' and with 'Contract price'. I create a shopping cart with the 'Price Information'.
    Then, I create another shopping cart using the anterior througth the functionality 'Old Purchase orders and template'.
    The price taken into account is the 'Contract Price'
    Is this the standard procedure?
    Thanks in advance,
    R Silva

    as far as i know the price preference is in this order
    1. Contract price
    2. Purchase Info record
    3. list price
    so in that case - this is standard procedure
    you can confirm - by doing the same process for an item that  has ONLY price information (list price) and see if that price is copied from old to new SC
    thanks
    -Adrivit

  • Block Purchase Order quantity and price based on BOM and Production quantity respectively

    Hi Everyone,
    Hope you can help in my first project in sap b1.
    My client requires that when a purchase order of subcon materials has been created it will get the 'price' from BOM row level unit price and 'quantity' from Production order row level quantity. My questions is if i there is a way to limit(block the document from addition) when does values has been changed greater than the reference document value? if ever, how?
    I'm new with SAP B1 and still learning.
    Im using SAP B1 9.0 PL 7 with Australian localization
    Thank everyone in advance!

    Hi,
    Try this :
    IF @transaction_type in ('A','U') AND (@OBJECT_TYPE='22')
    BEGIN
    If exists (SELECT t3.docentry FROM OWOR T0  INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry left join POR1 T2 on T2.[U_JONum] = T0.[OriginNum] and  T0.[ItemCode] =  t2.U_SubConItem] INNER JOIN OPOR T3 ON T2.DocEntry = T3.DocEntry WHERE T1.[PlannedQty] <> T2.[Quantity] and  T1.[ItemCode]  = 'subcon' and  T3.DocEntry = @list_of_cols_val_tab_del )
    Begin
    SET @error = 10
    SET @error_message = 'Not allowed to add more than planned'
    End
    End
    Thanks & Regards,
    Nagarajan

  • How to copy net price of the Contract to Valuation price.

    Dear All,
    I have a requirement to change the valuation price when raising purchase requisitions (ME51n). when selecting source of supply (Contracts), i want to copy the Net price of the selected contract to the Valuation price of the Purchase Requisition. i tried to find a Badi or User Exit to do this, but i couldn't find any.
    Can you please help me on this.
    Thanks,
    Chaminda.
    Hi all,
    I found a way to do this.
    ME_PROCESS_REQ_CUST
    Edited by: chaminda CK on May 7, 2010 7:21 AM

    found the answer
    ME_PROCESS_REQ_CUST
    PROCESS_ITEM method can be used.
    Edited by: chaminda CK on May 7, 2010 7:23 AM

Maybe you are looking for

  • Huge log file generation

    Hi, I have a report server.when i start the report server the size of log file located at $ORACLE_HOME/opmn/logsOC4J~Webfile2~default~island~1 > 2GB in 24 Hrs Please tell me what may be the root cause for this and what will be the possible solution f

  • Adding a TABLE to iWeb

    In the past iWeb users asked [how to add a table|http://discussions.apple.com/search.jspa?threadID=&q=table&objID=c188&dat eRange=lastyear&userID=&numResults=15&rankBy=10001] to an iWeb page. Just to keep me busy I wrote a tutorial. Tools needed: a S

  • Phone Doesn't Send or Receive Calls

    My issue isn't poor AT&T coverage or dropped calls, it is exactly what the subject line says. I get 100% signal most anywhere I've gone, whether the phone is on a table or in my hand; evenso, no calls go out and none come in. Plan of action? It was w

  • Itunes is continuously copying files from my iphone

    My itunes seems to continuously be stuck copying files from my iphone. it's been going on for over an hour now. Please help.

  • Loading Database Schematics

    I have been using Dreamweaver MX for a long time and stuck to this version as my home. I migrated from one PC to another and installed the same system and associated supports. In this new PC, once I open a php file, and say I have 4 recordsets in it,