Purchase requisition line item reject

I need to reject the requisition line item programatically.
Can any body suggest BAPI or Fun mod for it.
Please suggest me the solution.

you have posted correct question in wrong forum. Post is in ABAP forum

Similar Messages

MM: Purchase requisition line Items - How many line items can we use

Hi all,
1. Purchase requisition Line items (How many line items can we use?), is there any restrictions.
2. While creating PO with only one tax code for the related PR to input Tax code (without selecting line Items).
Regards,
Sudheer

Hi
There is no limitation for number of items in PR.
Tax code is always applicable for individual item only.It cannot be selected form the whole PO.
Regards
Dev

Unable to delete the Purchase Requisition line item

Hello MM sapperu2019s,
I am unable to delete one of the line item in Purchase Requisition. Please let me know how to delete this Purchase Requisition line item.
When I tried to delete the line item in ME52N the delete button is gryed out hence I could not able to do it.
The purchase requirement has reference of network in the account assignment.
Please let me know if you need more clarification.
Cheers,
Kumar.S

Hi,
You are experiencing the stnadrad behavior
When the Preq is automatically created from either
a production, plant maintenance, or network, order, what you can change
in the PReq is very limited.
This is to ensure no conflicts arises between the PReq and the source
application of the PReq (be it PP, PM/CS or PS).
The technical explanation is due to the recorded value in EBAN-ESTKZ
(Creation indicator). The value stored here (automatically by the
system) controls what you can or can't change in ME52/N.
We cannot delete the line item in this case
regards,
Lalita

Blocking a Requisition Line Item if A Purchase order exists

Hi All,
We are looking at a way to block a purchase requisition (not allow the end user to make changes) if a Purchase Order Exists for that purchase requisition line item. Is there a way of doing this without having to use a user exit?
We do have release strategies on requisitions so we can control the filed status there but this is not really going to solve the 'problem'
Your help will appreciated.
Kind Regards,
GA

Hi,
Thanks for your help. The end user are mostly changing the value, quantity and adding specification in the text fields. But the procurement department do not pick these changes up as the PO is already with the Vendor.
Regards,
GA

Purchase Order / Requisition Line Item Approval

Hi
Just wondering if Purchase Order / Purchase Requisition LINE ITEM approval is an option for workflow?
Would the better solution be to use SRM line item approval on a shopping cart and create the Purchase Order from this?

Hi
Just wondering if Purchase Order / Purchase Requisition LINE ITEM approval is an option for workflow?
If the process involved the need to use different approvers for different line items, would the better solution be to use SRM line item approval on a shopping cart and create the Purchase Order from this?

Deleting Purchase Order Line items

Is it possible when you delete a purchase order line item using ME22n to have the corresponding purchase requisition line item marked as closed or deleted?
Currently when we delete the PO line item we get the message that the "Requisition quantity XXXX open again" . We have purchase requisitions converting to purchase orders via ME59N on a schedule batch job, so the req gets converted to a PO again if it is not deleted quick enough.

Hi Gary,
In MRP related PR to PO or without MRP also, whenever you convert a PR to PO and then delete an item from PO, the corresponding PR gets opened automatically - and its standard. This is logical also, because sometimes the person creating PR is different from the person creating PO. And If a PO item has been created synchronous to PR item, then its deletion must also be sysnchronous.
I hope this answers your querry.
Regards,
HKV...

Reg purchase order line item numbering

Hi All ,
Is there any customization setting or possibility of cahanging the Purchase order line item number when the PO is created from the Purchase requisation , normally if the PO is created directly I am able to change the line item number as desired but if is created from a PR this is not allowed , please let me know any possibility of changing this .
Thanks and Regards,
Mallikharjun.

Hi Mallikharjun,
You can modify the Line Item numbering at IMG>MM>Purchasing>Purchase Requisition>Define Document Types.
Here you can change the column ItmInt. which determines the line item number intervals.
Hope it helps.
Cheers
Keshav

In Purchase Order Line item Maintaining Serial Numbers for Material Codes

Dear Gurus,
We have a business process in legacy system for Purchase Order like in PO line item, Material code with description, Quantity, unit of Measurement, Serial Number Start and Serial Number End is maintained, for example for Material code when we enter the data AXMLN00001 in Serial Number Start column, if the Qty 500 is maintained, by default system will calculate AXMLN00500 in Serial Number End column.
We understand that in standard SAP we donu2019t have this option of maintaining Serial Number Start and End in Purchase order Line item. Please let us know how this can be mapped and is it advisable to create two Z fields in EKPO table or else can we make any development.
Suppose if this is not possible in SAP for PO then in Banks if we want to place a order for Cheque books how we can maintain Start and End Serial Numbers to print in cheque books.
Also client is not agreeing to maintain manually Serial numbers in item text.
regards,
Dhanu

Aamir,
When the PO Item was created say for example Material had Valuation category "Y" and latter you wanted to change the category to "Y". Now system would have check for all open PO's etc...based on this you must have set Deletion Indicator to this Line Item to allow valuation category change in material master. Now when this Item got created in the table level (EKPO), system updates the valuation category "Y". Currently this valuation category is not active so it would not allow you to perform removal of deletion indicator as program cannot automatically nor you have an option to manually update the valuation category to this Item.
Regards,
Prasobh

Free of Charge indicator in Purchase Order / Line item

Dear All,
Is there a table where i could locate if a particular purchase order / line item has the FOC tick maintained. I went through quite a few tables and am unable to locate the same.
Or is there any other logic from which i could derive if a particular Purchase Order / Line item is FOC or not.
Shall await a reply
thanks
shabeen buhary

Dear,
The 'Free Items' indicator in the overview is only used to facilitate the switching off of the Inv.Receipt flag and the GR-based IV flag.
Note that the 'Free Items' indicator is not stored on the PO item table EKPO.
The Inv.Receipt flag (and the GR-based IV flag) are the fields that really controls if an item is 'free' or not.
So, the field is initiated based on the values in those fields rather than from input from the user.
When an invoice is expected it's not a free-item. This indicator invoice receipt is chosen from the main-item and also from the
customization maintained for item category 0 in table T163.
Regards,
Syed Hussain.

Purchase requisition with Item Category – L creation via Maintenance orders (Plant Maintenance)

Hi Guru’s,
I have a scenario where purchase requisition with Item Category – L (subcontract External) for Repair items (Storeroom Process) need to get generated with Item category-L.This requirement is to MAP in my system.
I am aware that purchase requisition can be created with reference to maintenance orders.
Can anybody through some light on the integration between PM and MM.
If creation of purchase requisition is possible via maintenance orders then please explain me with detailed steps both configurations and master data so that I can able to replicate the same as per business requirement.
I look forward to the expert’s response.
Regards,
Kumar

Hi Kumar.S
You have to installed DIMP 6.0, and activated the business function Refurbishment and Subcontracting (LOG_EAM_ROTSUB) and Serial Numbers in Purchasing (LOG_MM_SERNO) .
Please check the below link:
http://scn.sap.com/thread/1956895
Hope it will help you to resolve your issue.
Regards,
Ritesh

Price changes in Purchase order Line Items its displaying as"WF-BATCH"

Hi Experts,
I need some Information about Price changes in Purchase order Line Items,In PO Documents Price changes through this wf-batch has changed the value of this row to xxx.xx USD, which does not correspond the invoice.
If i selected the Item changes in the Purchase Order its displaying as"WF-BATCH".
So please try to clarify where this batch originates from.
Brgds,
RK

Hi Jurgen,
Thanks for your reply.
But how i can check this in Purchase orders,on what basis this price changes information is recorded in PO Line Item level.
can you pls guide me some steps to check the price changes through WF-BATCH.
Brgds,
RK

How To Restrict Users To Only Create Purchase Requisitions with Item Catalog?

Hi, everyone
Please help me,
How To Restrict Users To Only Create Purchase Requisitions with Item Catalog? is it possible?
Regards, Manuel

Hi Steenie Norman
First click on the text item ---> Tools ---> Property Pallete ---->
and change the Keyboard State to Local Only also this Depend in your OS
hope this useful ....
Regards
Mohammed

Delete purchase requisition with item category Subcontracting

Hi all,
I need to delete a purchase requisition with item category = L (subcontracting).
I am using already BAPI_REQUISITION_DELETE to delete other purchase requisitions but for the subcontracting it doest not work. In fact in the BAPI code you can see:
Requisitions with dependent reservations won't be processed
IF xeban-pstyp EQ 3 AND xeban-rsnum NE space.
So I am looking for other BAPI but I don't find any to delete this kind of requisitions. Do you know any way to do that or I have to do a batch input?
Thx,
Manel

Hi Manel,
I am using BAPI_PO_CHANGE to set EBAN_EBAKZ, however in most of the cases error thrown as "Instance PO Number of object type could not be changed".
Could you please help on this?
Thanks,
Murali

Purchase order Line item Excise Details

Dear All..
In purchase order line item Excise Details Basic price and Excise 14% and 2%cess and 1%Se.Cess And cst 4% Are Stored in Which table.. or any standard report available for this.. Please Resolve this.
Usefull Threads will Be Rewarded..
Thanks & Regards
Kumar

for excise check table J_1IEXCHDR for header
J_1IEXCDTL for item excise
The Table name used to find the Tax Values are
KOMV: Pricing Communications-Condition Record
KONV: Conditions (Transaction Data)
From the above tables you can refer the fields below.
KAWRT
KBETR
Fetch the corresponding records based on the field
KNTYP
hope it help
regards
kunal

User Exit for Purchase Order Line Items.

I have been trying to search for a User Exit for Purchase Order Line Items and have been unable to do find anything. I need to overwrite the Net Price and Pricing Condition on a certain type of material based upon the Pricing Condition for that Line Item which is on the Sales Document. Any direction you can point me into would be greatly appreciated. Thanks.

Thanks for pointing me in the right direction. I was able to create my first BADI using the PROCESS_ITEM method. The following link was also very helpful: Re: BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM

Purchase requisition line item reject

Similar Messages

Maybe you are looking for