Purchasing requistion dates are not reflecting in R/3

Hi All,
material created in R/3,here purchase requistion generated in R/3 & APO.
Then in APO,after Rescheduling in detailed scheduling planning board new purchase requistion delievery date is not
reflecting in R/3.
Kindly revert back ASAP.
Regards,
Venkat.
Edited by: venkat1215 on Jul 23, 2010 11:05 AM
Edited by: venkat1215 on Jul 23, 2010 11:30 AM

Venkat,
You didn't answer my question.
As a general rule of thumb, APO is much fussier about changing and synchronizing orders that were created in R/3. If you have a choice, you should always create purchase reqs in APO (although cross-creation is supported, and can be made to work nicely if you are diligent).
When you change an order in APO, and then publish the change to R/3, it is possible that the settings in R/3 will cause an issue with 'booking' the change. One way to test this is to manually make the same change, but directly in R/3. There should be no warnings or errors.
Another thing to look at are the Application logs on both sides (SLG1) for possible failures that may give a clue. Restrict to date and time interval where you know the proper update did not take place.
Rgds,
DB49

Similar Messages

Purchase Order values are not reflecting in MIGO

Dear Experts,
I have changed standared Pricing Procedure from TAXINN to TAXINT because excise calculation was wrong. Now I have assinged new pricing procedure & reflecting in Purchase order & working as per requirement also.But when we are doing MIGO, excise values are not automatically coming in MIGO. So Is there any configuration or missing copy control because i have changed pricing procedure?
Also I want to put a check, if purchase order value is not matching with vendor invoice value then stores person can't do the MIGO.
Could any body guide me?
Thanks
Trupti

Hi,
It is not like that you have to mandatory use the TAXINN rather it is recommended by SAP to use but if some business requirement doesnu2019t meet up with what is recommended that its business call to go TAXINJ from TAXINN, but right now we don't know at what circumstances they moved to TAXINJ but question is what are the settings missing while moving from TAXINN to TAXINJ and because of that system is not picking the Tax Values at the time of MIGO in excise capture & posting.
So I have several questions in mind in order to understand your system behaviour.
1) Are you using the correct Tax code at PO level?
2) If using the correct Tax code then is't correct value maintained in FTXP for the Tax code used in PO.
3) If correct Value maintained in Tax code then by clicking on Taxes button mentioned under PO item level details are you able to see the correct value against each applicable condition type in next screen by clicking over Taxes button in PO?
4) if not then first check J1id - Material Chapter Id combination, vendor excise indicator mentioned, correct duties maintained in excise duty so check all master data related to CIN maintained in J1id
So first give answer to above mentioned questions then we procees further but I am sure I can make your system to picked the correct duties don't worry Just answer my questions hope things become fine in your system.
Best Regards,
Silky
Note: Please assign valuable points in order to encourage contributors to each answer to queries...

One business area data is not reflecting queries very urgent

we had two business areas under one chart of account .while executing the query the fig of one business area not reflecting in queries what could be the reason.
please i will assign full points give me best solution.Very urgent
Regards,
sampath

my friend kalpana,
data was ther.i will tell u clear picture
i am configuring fi general ledger accounting.
i ahave loaded line item data to 0figl_o02
and i have loaded leading ledger data to ofigl_o10 and ofigl_c10
when i am executing the query i cannot see the fig from one of our business area ACC.Only CRIS B AREA FIG COMING.
WHTA COULD BE THE REASON.pLEASE HELP ME OTHERWISE I WILL BE
in big trouble.i need to test the data.Please kalpana.....
Thanks & Regards,
Sampath

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

2LIS_02_ITM deleted line items are not reflected in BW

Hi,
Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
Thanks

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Updated (VORowImpl ) values are not reflected in inline POPUP table

Hi Expert,
Currently i am getting exception when i try to update my iterator binding,
Here is my use case,
I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
Then i used the following code
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
itrBinding.executeQuery();
itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
Thanks

Thanks Frank, Actually i am accessing the client method as follows,
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
empoyeeVO.methodName();
May i know what is the different between accessing the method as shown above and access via the MethodBinding?
How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
Thanks
Edited by: user1022639 on Feb 7, 2012 5:24 PM

Changes are not reflected in Script output

Hi All,
i am facing a problem in SAPscript.
I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
please help me in this regard.

Hi,
Could you plese Check NACE whether your script is confiugring or not.
If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

Changes made in LR 1.3 to psd files are not reflected in ACR 4.3, Bridge 2.1.1.9, or Photoshop CS3

I have repeatedly imported several psd images into LR 1.3, made changes in the develop mode, and saved metadata to file manually in addition to having the auto write metadata option on in LR and ACR. Any changes I have made in LR are not reflecting in Bridge previews or in ACR or Photoshop. I don't believe I should have to utilize the write to xmp options (even though I have been) since the files in question are psd and the metadata gets written directly into the file. If I delete the photo from LR, and even delete the LR catalog (new user trying to make it work with 1 photo at least before importing all images) and re-import the psd to LR it appears with the changes and can backlog in the history panel to it's original state upon import into LR. I would have to be in LR though to know that anything was altered as the other Adobe programs will not display the changes.
If anyone has any help - I would greatly appreciate it!
Thanks,
Ann
System=
160 GB hard drive
Intel core duo T7500
2 GB Ram
Windows Vista 32 bit
ACR 4.3
LR 1.3
Bridge 2.1.1.9
PS CS3 (updated last week)

I don't think the problem lies in the name. LR is after all meant to function as a data base of images and be a companion program to PS - with PS doing the heavy editing lifting. I do understand that PS is a pixel editing file and LR is not. I like the idea of the non-destructive editing that LR has to offer and for a lot of image "developing" I prefer LR's interface to ACR.
In my humble opinion, I just think that the Photoshop family of products should all be able to read the same metadata. If I am starting in LR with a psd file (with layers) and I continue to process the image further in LR and save the metadata - therefore saving the changes - I want to be able to open that same file (not another copy) in ACR, PS, or Bridge and have those changes reflected. The only way to do that currently is to export the file and when you do that you lose the PS layers and the LR history panel or another way around it is you can have edit copies of the same file. If at a later date you wanted to go back and change something, you can't just pull out a layer in PS or undo a history state in LR and with the multiple copies of essentially the same image you end us with any editing history scattered amongst multiple files. I already keep 2-4 (original, psd, jpeg print, jpeg web) files for one image which I think is more than adequate. Which is why I find the current set up so frustrating. For now I have just settled for exporting jpegs so I can see the changes.

LPA changes are not reflected fully in 2LIS_02_SCL

The changes done to scheduling agreement, schedule lines are not reflecting in 2LIS_02_SCL, and there by resulting errors in delta update in BI system.
For example
     LPA     RM     SCL     Quantity                                    (2LIS_02_SCL)
ODS(A)      3001             15          800
ODS(C)     3001     X     15          300
     3001          15          800
PSA      3001     X     15          400
        3001             15          900
As we are using the Update type Addition,
From PSA, it is clear that the change is 500; this change got reflected in ODS properly.
But when I compare ODS data with EKET data,
LPA     SCL     ODS(Active)          EKET
3001     15     800               900
As you can see wrong validation results between BI & R3
I am missing the below changes happened to SCL in the extractor
     3001     X     15          300
     3001          15          400
The missing above entry is resulting errors.
Does anybody know how the EKET line changes can be tracked?
How to check the V3 Update, we checked the program: RMBWV302
Does anybody have idea where to track this error.
Note: the above case is happening to only a for few documents
Regards,
NK.A
Message was edited by:
        nandakumar a

Hi Renjith,
Thanks for the reply. Can you please let me know few more answers to the below points.
As the datasource 2LIS_02_SCL does not takes this event into account (only MA, MB, MC and MD), this field is not passed to BW (you can see the events per datasource in transaction LBWE)
You are referring to posting of the Material Ledger posting right ? Can you please give some more information about MA MB MC MD as I have verified in LBWE and could not find anything about it except that its picking that GLMNG value from MCEKET table.
Renjith, Please update your views on the below query. I am not able to get any answers from anyone on this query. I appreciate your reply.
In my opinion you would be able to fill it in the customer-exit of LIS (EXIT_SAPLEINS_001) or BW (EXIT_SAPLRSAP_001)
If I add a zfield to the SCL DS and then populate that field with the code in the include ZXRSAU01 , EXIT_SAPLRSAP_001 in that going to help.
Do I have to verify the events MA MB MC and MD while populating this zfield or I can just do a direct lookup on EKET
select single * from EKET
where EBELN = l_MC02M_0SCL-EBELN
and EBELP = l_MC02M_0SCL-EBELP
and ETENR = l_MC02M_0SCL-ETENR will do ?
So when ever the ds fields are getting populated in the org DS ...it will find this zfield in the same structure and will fill this field. Is that going to fix it ? I have also found couple of SAP Notes on the same issue and do you think implementing those notes will fix the problem without the zfield or code.
Could you please check out these notes 100690 and 431145. Please suggest.
Thanks,
Daniel

In Journalization updates are not reflecting in target

Hi,
I am using Simple Journalization for SQL Server tables. Only the newly added rows are reflecting in the target but not the updated ones. I have inserted two rows and updated one row in source. Only the inserted records are reflecting in target and updated record is not reflecting in target.
When I check the intermediate(I$_CDC_TARGET) and JKM tables(J$CDC_SOURCE) both inserted and updated rows are there. Why this updated records are not reflecting in target?
Both Source and Target tables have Primary keys.
Thanks,
Naveen Suram

Hi,
I am using IKM SQL Incremental Update (row by row). Updated are coming to I$ table and I am able to see these records in Journal data also.
One doubt here: In my source no extra columns are coming...I refered JohnGoodwin blog...according to the blog...there should be some extra columns related to journal right? Why they are not coming?
First I have added the JKM to my model..then added the data source to CDC...then created a sunscriber...then started a Journal....
Any thing I am missing?
Thanks,
Naveen Suram

Changes are not reflected in ODS

Hi all
Can anyone help me with this!!!!!!!!
There is an ODS1 which gets data from transparent table. From ODS2 data is loaded into transparent table. Then the data is deleted from ODS1 and ODS2.
Again the data is reloaded into ODS2 and then into ODS1.
The changes are reflected in the ODS2 and changes are not reflected in ODS1
Even after refreshing also changes are not reflected in the ODS1.
what could be done??????
Thanks
Rani

Hi rani,
U need to check whether the changes are reflected in the transparent table once you reload it from DSO2.
The reason might be, the key of the table might be different hence it might be adding records instead of overwriting or updating it. If there is any code used, check the logic whether u are appending or modifying the contents of the table. generally it should be modifying the contents.
Hope this help
Regds,
Shashank

Database updates are not reflected in JDO objects.

How to set time frame for sync up between database and cached JDO object?
I am using kodo JDO in a servlet container, and a command line application
will also updating database but these changes are not reflected in the
database. The __kodo.DataCacheTimeout__ is not working for me.

Are you using the level-2 data cache? If not, then the
"DataCacheTimeout" property won't affect your application.
Does the application use a single long-lived PersistenceManager, and the
cached data you are seeing is from accesses in that PersistenceManager?
You could always get around this with periodic calls to
PersistenceManager.evictAll().
In article <c50efo$r7g$[email protected]>, dharmendra wrote:
>
How to set time frame for sync up between database and cached JDO object?
I am using kodo JDO in a servlet container, and a command line application
will also updating database but these changes are not reflected in the
database. The __kodo.DataCacheTimeout__ is not working for me.--
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

Changes made from application are not reflecting in Database and vice versa

I am updating changes from my Application. However the data in not reflected in the DB. I logged in and can see no change. However, the changes are being reflected in the Application, even after a server restart. Any ideas on this ?? its wierd !!

SELECT   c.sql_text sqltext
    FROM v$session a, v$sqltext c
   WHERE a.SID = :session_id AND a.sql_address = c.address(+)
ORDER BY a.status, a.last_call_et, A.SID, A.username, C.pieceSQL_ADDRESS
SQL_HASH_VALUE
SQL_ID
SQL_CHILD_NUMBER
Check this to see the last executed sql in your database , make sure you connect to right database with right schema
Last executed sql

Updates on my MAC to numbers are not reflected on my OIS devices

Updates on my MAC to numbers are not reflected on my OIS devices.

Thank you for the quick responce.
I need to expand my experience to you with this issue.:
     If I update numbers on my Air laptop the changes are reflected on Ipad Air.
     If I update numbers on my Ipad Air the are reflected on my laptop.
Thinking my problem is in my MAC I tried:
     I went to icloud on my MAC and tried to reset documents and data with no sucess. I tried 2 different 24 hr. periods.
     I signed out of icloud on my MAC and signed back in the problem of making changes to numbers on MY MAC were not reflected on my ipad or laptop
If you have any other ideas I would love to hear them.
Thank you very much.

Purchasing requistion dates are not reflecting in R/3

Similar Messages

Maybe you are looking for