How can we see tha last change.

Hi all,
     suppouse i writen program.same prg somebody modifed.
     where can we see the who did the modification (means last changed)
    how to see any tcode or how ?
Regards.
krish.

Hi
You  can see that in <b>Attributes</b> of your program in Trxn SE38.
Also, if they are using version management (creating a version before changing), you can compare the current and previous versions and see what had been changed.
Regards
Raj
Message was edited by:
        Rajasekhar Dinavahi

Similar Messages

  • Can you help me?? How can i see tha last location??

    someone stole my iphone
    i put removed en mobile me to cancel the last place seen
    i m waiting to the appear again
    But how i can see the last location?
    tx

    You need to contact Apple directly.
    My iphone was taken by a pickpocket in Paris and I receive a message that it has been found.
    Where your iphone was stolen?

  • How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on?

    How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on? I can see my macbook but I cant see the last location of my ipod touch. I lost it a few weeks ago and figured it would show up. But it has not and I need it again for my job. Please help.

    There is nothing you can do now. There are apps available from the app store that would give you that information if installed before it was lost/stolen.

  • TS3376 i have lost my iphone and have put it in lost mode. it says that i can trace the last 24 hours however it is only showing me where the phone was at 7 pm last night and it is grey mode... so obvoiously off how can i see the last 24 hours?

    I have lost my iphone 3. I have placed it in Lost Mode however it is only showing my last location at 7 pm last night. How can i see the last 24 hours? it is in Grey so not on..

    Find My iPhone only keeps a history of locations after you put it in lost mode.  It also has to be online to provide an updated location.

  • How can i see the document change for project in CN60

    Dear all,
    i want to see the project change in the report.
    i know i can see it using cn60
    but now, the system states that there is no data.
    i have ticked document change in the project profile.
    it seems useless.
    could anyone tell me how i can see the change documents?
    is there anything else i shall config?
    thanks a lot.
    Judy

    Hiu2026.
    Regardingu2026.cn60
    Tick change documents in the project profile on the right side.
    Not in the under status management. Section.
    Run transaction CJEN for project
    And check in cn60.
    Regarding checking changes in cj20n.
    Cj20nu2026.click on the WBS/Activity(which one u want to see).
    Editmenuu2026.status.....systemstatus/userstatus.
    Go to extramenuu2026..change documentsu2026.all.
    Check in Allchangesu2026.and history.
    I hope it will reach your req.
    Experts....plz correct me if im wrong.
    Regards
    Chandra

  • How can I see the last logon of one user?

    Hi experts!
    I need to check the last logon of one user.
    How can I check that?
    Thanks a lot!

    Hi Carlos,
    You can check the users last logon to SAP from :-
    SE16N - Table USR02
    <b>Last login is TRDAT - Last logon date
                       LTIME -  Last logon time</b>
    Thanks,
    Vinay

  • How can I overwrite the Last Changed Field (AUFK-AENAM)

    We have an XI application that updates networks in R3 by calling BAPI_NETWORK_MAINTAIN.   The XI RFC Client Parameter has logon user/password that connects to R3, so when a network header is updated by calling the BAPI_NETWORK_MAINTAIN.....then the logon user id is used to populate AUFK-AENAM.   Is there a way to populate AUFK-AENAM if it was passed to a function/class (or via an EXIT or BADI)........basically I'm looking for a way override AUFK-AENAM.
    Thank you any help.

    Badi:WORKORDER_UPDATE
    Method:IN_UPDATE
    Parameter:IT_HEADER_OLD
    Set value VBKZ = 'U'"For Update.
    Below is SAP documentation of method IN_UPDATE fron SE18:
    Functionality
    This method is executed during the update after the order is saved.
    Parameters
    All tables relevant to orders of all the orders processed within this transaction (also cross order type) are transferred. A table containing all changed records is transferred for each order object and a table *_old that contains the original state of the changed records when the transaction was started.
    To differentiate between different order categories, evaluate the "AUTYP" field in the order headers.
    To determine which actions were carried out on the individual objects of an order, you can evaluate the update indicator in the individual tables. In the different tables, the update indicator is called "VBKZ" (exceptions: IT_PMPARTNER-UPDKZ, IT_PRT_ALLOCATION-MODKZ, IT_MILESTONE-VBKZ_MLST or IT_MILESTONE-VBKZ_MLTX) and can contain the following entries:
    "I": Insert
    The data record is written to the database again. No *_old entry exists
    "U": Update
    The data record already exists in the database and has been changed in the transaction. An *_old entry exists.
    "D": Delete
    The data record already exists in the database and is to be deleted. An *_old entry exists.
    The data record exists in the database. No changes have been made in the transaction. An *_old entry exists.

  • How can i see the last known location of my iphone

    I lost my iphone recently and have then tried to look at the location of it on find my iphone. I did not do this within the first 24 hours of when it probably ran out of battery but I know that it was all set up right. Is there any way that I can get the map of where it was last located as the battery went towards the critical level.
    Any ideas would be greatly appreciated!
    Many Thanks

    Welcome to the Apple Community.
    ... Is there any way that I can get the map of where it was last located...
    Unfortunately not.

  • How can i check the last location of iphone when it was on?

    I left my iphone in a taxi, but i found the taxi's home, i went to his home and i told him to give me back my iphone but he told me that he never seen iphone in his taxi.
    the iphone was on when i left it in the taxi and it was still on till 4 hours after i left it, probably he found the iphone and went to his home so i just wanna check the last location of iphone, if it shows in his home area so i will be sure that he got the iphone and then i contact the police to take it back but otherwise i can not do anything cause he says i haven't found it.
    plz plz help me

    it was active when i lost it and i went to icloud website, but it shows offline. that means that it is off.
    i just need to know if the iphone keeps recording of location where you go and how can i see the last location of iphone when it was on.

  • HT201269 How do I see the last time my phone was backed up?

    My iphone has gone dark. I was planning on getting a new phone but I can't turn my old phone on to transfer data. How can I see the last time my phone was back up?

    If you back up to iTunes, open iTunes on your computer.  Go to Preferences (from the leftmost item in iTunes' menu bar), then choose "Devices".  The backup time will be shown there.
    If you back up to iCloud, you would be able to see it on your iPhone, but since you can't turn it on, I don't think there is another way to find it.

  • HOW DO I SEE THE LAST DATE I BACKED UP ON ICLOUD

    How can I see the last date that icloud was backed up?

    Go to Settings>iCloud>Storage & Backup and look at the very bottom under Back Up Now.

  • Why does my I-Phone 4 calendar only show apptmnts from the last 90 days?  How can I see appointments prior to then?

    Why does my I-Phone 4 calendar only show apptmnts from the last 90 days?  How can I see appointments from prior to then?

    The Sync setting only appears if you are syncing your calendar with iCloud.  If you are syncing them to another service (such as Google) you would need to go your account with that service and see if you can change the setting there.
    If you are syncing your calendar with iCloud, you should see the Sync setting, and be able to tap and change it.

  • How can i see how many people are using my apple id without changing the password ?

    how can i see how many people are using my apple id without changing because some people have it

    I'm not sure that you can. Why have so many people got your password? So many in fact, that you don't know how many.
    You can see how many computers are authorised to play any songs you have purchased from the iTunes Store, but that isn't quite the same thing.
    Perhaps a better idea would be to change the password and not let anyone else know what it is. That would at least prevent anyone else from changing it and locking you out of your own account.

  • How can I see changes in table with insertrow();postchanges()without commit

    Hi friends;
    I use jdeveloper 10.1.3.1 with jheadstart 10.1.3.1.
    I create two view object.In the first page I create table with one view object.
    In the second page I create table (with tableselectmany) with other view.
    I select many rows in second page and in the managed bean,
    I insert selectted rows atributes to first pages tables attributes.
    I use this code.
    public String commandbuttonaction(){
    CoreTable table = this.getTable1();
    Set rowSet = table.getSelectionState().getKeySet();
    Iterator rowSetIter = rowSet.iterator();
    BindingContainer bindings = getBindings();
    DCIteratorBinding pr_dcib = (DCIteratorBinding)
    bindings.get("DeptIterator");
    int i=206;
    while (rowSetIter.hasNext()){
    Key key = (Key) rowSetIter.next();
    pr_dcib.setCurrentRowWithKey(key.toStringFormat(true));
    RowImpl prRow = (RowImpl) pr_dcib.getCurrentRow();
    String AM="model.AppModule";
    String CF="AppModuleLocal";
    ApplicationModule empSvc = Configuration.createRootApplicationModule(AM, CF);
    ViewObject emps = empSvc.findViewObject("EmpsView1");
    Row newEmp = emps.createRow();
    newEmp.setAttribute("Manager",new Number(1));
    newEmp.setAttribute("Department",new Number(1));
    newEmp.setAttribute("Depno",new Number(3));
    emps.insertRow(newEmp);
    try {
    newEmp.validate();
    catch (Exception ex) {
    System.out.println("validate catch");
    try {
    empSvc.getTransaction().postChanges();
    catch (Exception ex) {
    System.out.println("post catch");
    Configuration.releaseRootApplicationModule(empSvc,true);
    i=i+1;
    In this code I only postchanges() in first view and dont want to commit.
    But I cant see changes row in the page .If I press save I see transaction completed succesfully message.
    But in database not insertted any rows.
    If I write commit() after postchanges() code I see rows in the table .But I dont want to commit.Only post
    my changes and if necessary I press save button in page.
    How can I see changes in the page without commit???Thanks for all....

    You should NEVER use statements like this in managed beans:
    ApplicationModule empSvc = Configuration.createRootApplicationModule(AM, CF);
    This will create a separate application module instance, not shared by the the web pages. That's why you do not see the changes.
    Instead, you can use the following code:
    ApplicationModule am = (ApplicationModule)JsfUtils.getExpressionValue("#{data.MyAppModuleDataControl.dataProvider}");
    where MyAppModuleDataControl shoud be replaced with the name of your am data control.
    Steven Davelaar,
    JHeadstart Team.

  • HT201209 How can I spend my last 0.04p So I be able to change my store?

    How can I spend my last 0.04p So I be able to change my store?
    Please remove it if it poseble?

    You can try contacting iTunes Support and ask them if they can remove the balance from your account so that you can change countries (we are fellow users here on these forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for