Purple line at the bottom of the touch smart screen

I have a purple line at the bottom of my touch smart screen , that is causing the icons to flicker rapidly . How can i resolve this .

Hello,
If you restart your system, is that purple line still there?
During the boot process into windows, do you still have that same line?
If you boot into BIOS or into safemode, is that line still there?
You can try to remove the video card driver and see if that resolves if not, better to try to update the video card driver, but for that, you need to tell me what computer model you have, the exact and entire model.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Similar Messages

The horizontal line has been appiered at the bottom of the touch screen. In addition to that problem the screen starts blinking after 3-5 minutes of use. I bought it 4 months ago.

Please help me to resolve a problem with my iPod touch. It has horizontal line at the bottom of the screen and screen starts blinking after 3 minutes of use. It's so frustrating as I bought just 4 months ago and didn't even think tha apple products have such defects.

All electical producs have defects. Apple products are not immune.
To rule out a software problem try:
- A reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
- If still problem make an appointment at the Genius Bar of an Apple store. If the iPod is defective you will walk out with a replacment.

How do I remove a small line at the bottom of the page?

Hello!
I'm formatting some work for a client and I can't seem to find out how to remove this line at the bottom of the screen. It's on every page. It's not a line that was drawn in because I can't click to remove it. Has anyone seen this before?
Thanks,
KHILL

Post a screen shot so we know what you are talking about.
Does it print, or is it just on the screen?
Jerry

The Windows XP links tool bar at the bottom of the screen now hides the last line or lines of the browser screen. Why? (V3.6.16)

I use V 3.6.16 and since a recent update, it looked as if I'd lost a line or two at the bottom of the screen. What happened is that the Windows task bar showing quick launch icons, links to running programs (tabs) and the clock, etc., now obscures the last few lines of the browser display. This is since approximately a week. I assume it's due to FF updates rather than to WinXP but of course I don't know. I don't see a problem with other programs. In particular, IE doesn't do it which makes me think it's an issue with FF and it's new. I looked for something under options I could change but couldn't find one. Anyone have an idea?
System is working fine -- Windows XP SP/3 with all updates. Avira antivirus. Thanks!

Oops... sorry! Problem was that the window was not full screen! Darn, I'm a dummy. It was almost full screen so I didn't bother to check. Issue solved. Sorry for the false alarm.

When doing the app exposé gesture, is it normal to see a thin white horizontal line at the bottom of the screen after minimizing a window?

I noticed that when I open two windoes (say Safari and Trash can) and minimize both windows so they go on the dock, when I do the swip down gesture with 3 fingers (App Expose´) there is a thin white horizontal line at the bottom of the screen. Does it happen to every macbook pro out there? Is this normal? Hope it's not a display screen problem...

You would have to have multiple pages of the app minimized.
This is what it looks like with Safari with 1 page open and 4 minimized.

HT4623 Went thro upgrading process for my mini ipad from version iOS 6 to iOS 7.At the end came to Terms & Condition section which prompted options "Agree" or "Disagree" at the bottom but on touching "Agree" there is no response at all & the ipad is unres

Tried to upgrade my mini iPad from its original iOS 6 version to iOS 7. All nearly completed but I can't get past the "iCloud Terms & Conditions" & "Privacy Policy" page as prompting to "Agree" or even "Disagree" at the bottom of the page does not let the iPad progress (or even backtrack) to any other display!
I can actually see the GHOST PAGE titled "Find My iPad in iOS 7" concealed partially below the "Terms & Conditions" page.
Since touch-prompting "Agree" on "Tems & Conditions" page failed to get any response,I also tried prompting "Disagree" in the hope that the upgrading would cancel or withdraw so as to go back to a perfectly working order version iOS 6 as before but unfortunately NOTHING AT ALL is happening & the iPad has become totally unresponsive. Can anyone please guide me as to how to Restore my iPad to its working state as before?

Try reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to get columns of type to line up across the bottom of the page

I want to improve a newsletter I design. Right now all the leading is the same throughout. Body copy, caption & Heads. I want to add space after the paragraphs. I want the captions to have less leading than the body copy. That's doable right? Withe Baseline Grid. But how can I get the columns to line up at the bottom of the page if each one is an unpredictably different height? Maybe this is a design grid problem not a typographic one? Any suggestions?

If you use a baseline grid and space before/after your spaces must by necessity equal the leading (using the align to grid option will force them to the grid, regardless of the chosen size). The grid should match the leading of your body copy.
If you have headings that you want space before and after, don't align them to the grid, but make sure that the total of the space before, after, and leading for the style add up to a multiple of the body text leading. That will work smoothly everywhere except at the top of a column, where the space before is ignored, and will be added to the space below by virtue of the align to grid on the body copy.
If instead of having all the copy lign to the grid you just want the top and bottom lines flush, and you want the leading within the paragraphs constant, but a variable space between paragraphs, set the text frame to vertically justified, then set the maximum spacing between paragraphs to a ridiculously large number and all of the extra space required to fill the column will be split between the paragraphs.
Peter.

On XP Machine dedicated to Lookout 6.5. The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph. After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line an repeats.

On XP Machine dedicated to Lookout 6.5. The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph. After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line and then repeats. Even without any traces on the graph, it does the same thing.
I've uninstalled and reinstalled the 6.5 software. Nothing else runs on this machine. It is dedicated to Lookout. I've installed a gauge object, with the same datapoint that the hypertrend is trying to graph, that updates very rapidly with no problem, so doesn't appear to be a network problem.
I'm only tracking one datapoint, at this time, until this issue is solved. Help please?

Here is the screen shot.
Definitions for this post:
- "streaming data" = Data coming in over ethernet from datapoint that is being polled.
- "1 scale-second" = 1 second of time based on the scale on the bottom of the graph
Remember that data continues to trace. However, according to the scale at the bottom of the graph, the graph traces 60 seconds of streaming data in @10 scale-seconds, then displays .01 second of streaming data over 50 scale-seconds. The .01 second of data is the long straight lines that you see between the rapid data traces that appear to be 50 scale-seconds.
Even without any datapoints being traced, the graph clicks forward 1 scale-second every 6 real-time seconds. It does this for @10 seconds then clicks forward @50 scale seconds, instantly. Then repeats, as you can see in the graph.
The gauge that is on the same control panel, that you see in the screen shot, is tracking the same data point as the graph. It is polling the data point at real time and never stops updating, so I know that the network is streaming just fine.
513.850.9509 - if I can help clear things up.
Attachments:
LookoutFunkyGraph.jpg ‏347 KB

How can you get the summary/total line at the bottom of the finder window to show up?

I want to avoid having to select a hard disk, Get Info to see how much storage is left. This used to happen automatically in the summary line at the bottom of the Finder window. I don't see how to turn this on anymore.

Finder > View > Show Status Bar
Regards,
Colin R.

When capturing video; how do I get rid of the green lines at the bottom of the frame?

When capturing video; How do I get rid of the green lines at the bottom of the frame?

s.haider
You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
And, the general drill for all users of Premiere Elements 8.0
a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
b. Are you working from the 8.0.1 Update version of the program?
Please consider.
We will be watching for the outcome.
Thank you.
ATR

Div does not touch the bottom of the browser?

Hey guys
Please have a look at this website thats i busy working on www.flyingantserver.co.za . The problem im having with it is that the div is not touching the bottom of the browser. Im not sure why, but i think the problem might be in my css, Please could someone help me spot the problem thanks.
Yours
Ashveer

Hi Mahendra
I just had a look at it on an older PC with IE6 and its all off. Now I know most of the methods I have used are modern but how can I satisfy both versions of IE by achieving the same result.
Yours
Ashveer

How to write a line at the bottom of the page

Hello all,
My smartform has header, body,footer.
I have placed everything in MAIN window as the details should come in all the pages.
Now my requirement is I have to print the page number at the bottom of the page.
I print multiple documents at a single shot (means multiple deliveries for example.)
The page number must be reset when I start printing another document (new delivery).
For this, as I can not use SFSY-PAGE,SFSY-FORMPAGES etc., I have used a variable and incremented it. It looks fine.
But my problem is I am not able to print the page number at the bottom of the page. It appears immediately when the header and body is finished.
Can you help suggesting some Idea so that Page number can be pushed to the bottom ?
Points guaranteed.
Thanks.

Hi,
the issue now is I am getting the page number correctly.
Only problem is it is not printed at the bottom of page.
Page 1
As shown above the page number appears immediately after the contents of body.
What I want is,
Page 1
hope it is clear.
Thanks.

How do I remove the permanent frosted bar along the bottom of the iPad? It's only appeared in ios7

It's only appeared in ios7 and it's annoying :(

What "bar" are y'all talking about? On the home page, there's the usual bottom bar (the dock) with the primary (user chosen) app icons. Once in an app, there is no bar unless the app has put its own bar there or you press the home button.
And if you mean the bottom bar the has sound level, brightness, airplane mode, etc buttons/icons, it's there because you swiped up from the bottom to display it. Just touch the curved line above the middle buttons on the bar and swipe down to get rid of it.

Can't reach the print button on the bottom of the page

When the page preview page appears, I can't reach the print button at the bottom of the page.

To use AirPlay, you will need the following:
iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
Apple TV (2nd or 3rd generation)
AirPort Express
Wi-Fi (802.11a/g/n) network

How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid

How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid. When I tried to type this in for registration, it does register as this numbers also contain letters in it. Apparently the registration boxes accept numbers only. What do I do with a useless product for which I have paid good money for it?????

This is the simple solution which was offered to me when I tried to get the serial code on line.
The box and disc sleeve do not contain a series with 24 numbers which I presume is the product code to install.
I tried to redeem the registration code by following what they recommended, but inevitably it gets to the page that showed the registration boxes that need 24 serial numbers and I got stuck again.
This product is so different what my previous experiences of other software products where I just enter the serial number straight from the disc sleeve and then I got registered and go on to use the software.
I is really frustrating, spending the last two hours trying to get my product going....

Purple line at the bottom of the touch smart screen

Similar Messages

Maybe you are looking for