Push button details in web ui of crm 6.0

Hi All,
I would like to view and know the details of existing push buttion function in web ui crm screen.
Though clicking F2 on the push button, i am able to see the technical details of Component, View, Context Node and role key.
I need to add the same existing functionality in a differenct view for which i am not able to find the details in the Structurte of Component IUICMDC. Please help us.
Thanks and Regards to all
P.Raj

Hi,
You need to know wich view you want to add the new push button.
In trx. BSP_WD_CMPWB select the view and enhance it. Go to the view layout and check if you see something like this
        <uhtmlb:toolbar id              = "Toolbar"
                        buttons         = "<%= controller->get_buttons( ) %>"
                        maxButtonNumber = "3" />
If yes, and I think you will find enhance the method get_BUTTONS OF _impl class
Add the code
CLEAR ls_button.
ls_button-id       = 'New Button'.
ls_button-text     = 'New text'.
ls_button-on_click = 'NEWMETH'.
ls_button-enabled = 'X'
APPEND ls_button TO rt_buttons.
Create a method with name you used in on_click property.
Best regards,
Caíque Escaler

Similar Messages

Execute in Back ground when push button clicked on alv output

Hi Friends,
I have a alv list display report with check boxes and a 'Detail' Push button in output
when i check the check boxes and click on the 'Detail' Push button detail report is
displayed using 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'. My requirement is if I click on 'Detail'
push button the code should also execute in back ground creating the spool. Request you
to help with sample code. I tried with below but not working.
WHEN 'DETAIL'.
      call function 'START_OF_BACKGROUNDTASK'
      exporting
       startdate = sy-datum
       starttime = sy-uzeit
      exceptions
      others    = 1.
      if sy-subrc = 1.
       exit.
      ELSE.
       PERFORM determine_table_from_output CHANGING rs_selfield.
       PERFORM call_alv_detail.
      endif.
     commit work.
Thanks,
Neetha.

You could encapsulate the detail display in a separate report and call it in your 'DETAIL'-section like this:
DATA: lv_number TYPE tbtcjob-jobcount,
           lv_name   TYPE tbtcjob-jobname,
           ls_rsparams TYPE rsparams,
           lt_rsparams LIKE STANDARD TABLE OF ls_rsparams.
*           Get free job number
             CALL FUNCTION 'JOB_OPEN'
               EXPORTING
                 jobname          = lv_name
               IMPORTING
                 jobcount         = lv_number
               EXCEPTIONS
                 cant_create_job = 1
                 invalid_job_data = 2
                 jobname_missing = 3
                 OTHERS           = 4.
             IF sy-subrc = 0.
               SUBMIT 'ZDISPLAY_DETAIL'
               VIA JOB lv_name NUMBER lv_number
               WITH SELECTION-TABLE lt_rsparams
               AND RETURN.
               IF sy-subrc = 0.
*                Submit
                 CALL FUNCTION 'JOB_CLOSE'
                   EXPORTING
                     jobcount             = lv_number
                     jobname              = lv_name
                     strtimmed            = 'X'
                   EXCEPTIONS
                     cant_start_immediate = 1
                     invalid_startdate    = 2
                     jobname_missing      = 3
                     job_close_failed     = 4
                     job_nosteps          = 5
                     job_notex            = 6
                     lock_failed          = 7
                     OTHERS               = 8.
              ENDIF.
Regards,
Ulrich

Service Order creation from CRM Web-IC hwen user click the push button.

Hi experts,
I need to create the service order (in IS-U) when the user will click the push button in CRM-Web-IC.
I know the RFC for the same to be used in IS-U but for that I need to get order type which is mandatory importing parameter for RFC.
I know BP, Premise & Installation.So,How can I get order type for that?
Reply will be greatly appreciated.
Thanks in advance.
Regards,
Abhay.

Hi Gagan
Could you please share with your solution, i am kind looking help in same are. We are using CRM 7.0, but i can not find BOL component which is ISUSRV.
My requirement is to create Service Order from Webclient, example meter problem reporting, etc
Please kindly reply or by email shankar no dot vangari at gmail com
regards
shankar

Push Button Problem in IC Web Client

Hi Everyone,
I have got an issue here. Iam working on IC Webclient.
I have got a BSP page wherein I have an input field for the Printer Name. I also have a dropdown list box for that. I have a push button and after clicking on which I want some database updates to be done.
But whats happening is once I take the Printer value from the dropdown list box only, the database updates are being made.
My aim is after I take the value from the dropdown and then click on the push button, thn only, the database updates needs to be done.
Please help me out.
Its too urgent.
Thanks an Regards,
Bhargava Kavuri.

Hi Gaurav,
I gor confused with CRM 5.1/5.2 and CRM 2007 profile. You are on CRM 5.0 then you do following things
1) goto tx ppoma_crm
2) on top left under search screen, search for Positions " Sales" and Marketing and Service one by one.
Now assign yourself to each of these positions. ( You might find more than one psoition when you search by above criteria. Ideally you should be able to see position names soemthing like Sales Representative, Marketing Represetative etc . I am not sure what exactly would be the name at your system because ppl might chnage the description of positions.
Now launch UI again and you must be able to see all modules.
Let me know if u still have any issues

PFCG push button, not appearing on the SAP Easy menu screen in CRM 7.0

Hi Experts,
PFCG push button is not visible on the SAP GUI, Easy Access menu screen in CRM 7.0.
But I see it appearing on the CRM 2007 SAP Easy Access screen.
So how to make it appear on the SESSION_MANAGER screen, that is Easy Access Menu screen.
I tried the 'Customize Layout' options, but I don't see anything there to make the PFGC button appearing.
Please let me know the settings.
Thanks,
John

Hi Fredrick,
i´m on CRM70 SP05 and i have the pushbutton to PFCG in my easy access on top.
I´m not sure why you won´t see it.
I guess you already checked your authorization?
Kind regards
Manfred

WAD: Push button not displaying some Web Items

Hi All,
I have a web template 7.x in which there is a push button for "Export to PDF". There are some changes carried out to this web template, to include one radio button web item. My requirement is to display this Web Item on the export to PDF page.
I have included this radio button web item in "Export to PDF" button list. However still it is not displayed on Export to PDF page.
Is there any other setting which i am missing?
Appreciate your quick response.
Thanks.

Hi Samruddhi,
As per SAP Note 1069368 which talks about the limitations of Export to PDF functionality in WAD 7, the following webitems alone are supported on Export to PDF:-
Supported Web items
Analysis item
Report item (see also the section 'Web application export with report items')
Chart item
Map item
Information item
Text item
List of conditions
List of exceptions
Images (only from the MIME repository, see Note 484390)
Thus Radio Button cannot be included in the exported PDF.
--Priya

How to code just like push the detail button in oo alv ?

I work with oo alv ,how to do it when I double clikc mouse then just like I push the detail button?
what i want to do is when I double click mouse ,it works just like push the detail button on the toolbar , I did debug and get the function code just
when i double click mouse , and I use
CL_GUI_CFW=>SET_NEW_OK_CODE to do it ,but it not work as i wanted!
in the class cl_gui_alv_grid the constants :
constants MC_FC_DETAIL type UI_FUNC value '&DETAIL'. what is the ok_code for it ? i debug i and get the ok_code but it not work!
can anyone give me some suggest ?

You can invoke an ALV toolbar function using the method SET_FUNCTION_CODE of class CL_GUI_ALV_GRID
a®

Navigation between different componets in IC Web Client for CRM 7.0

Once the user click save button in component ICCMP_BT_BUTTON I need to navigate to component ICCMP_BT_SVO that displays the Service Order Data and display the new Service Request that was created.
How can I do navigation between different componets in IC Web Client for CRM 7.0?
Thanks.
Rodolfo Miã

Hello,
You can find detailed presentations in the learning maps available on the SAP Service Marketplace http://service.sap.com/rkt-crm for release CRM 2006s, CRM 2007, or CRM 7.0. In case I didn't mention it before, Intent-Driven Interaction (IDI) was first introduced and is only available starting with CRM 2006s and above. In the Interaction Center area, there is a presentation called "Rule Based Automation and Guidance" which covers IDI. I'm not sure if you can access the URL directly, but just in case here it is: [https://websmp104.sap-ag.de/~sapidb/011000358700001162852007E].
Warm regards,
John

Calling ERP Web Dynpro from CRM Opptunity with parameters

Hi, experts!
In CRM7.0, I'm calling ERP Web Dynpro from CRM Opptunity.
We've added a button in Opptunities and the buttom can navigate into ERP Web Dynpro.It works fine.
Now, I'm trying to move the value of Opptunity ID to a field in ERP Web Dynpro when we push the buttom. That's a problem I want to solve. We're struggling to move the value, but it doesn't work.
We uses the following settings:
1) We call Z- Logical Links generated by Transaction Launcher when we push the buttom.
2) We define Transaction Parameters in a Transaction Launcher Wizard(Step5). We've set "//clipboardBTOrder/BTOrderHeader/OBJECT_ID" or "//datacontextCURRENTBT/BTOrderHeader/OBJECT_ID".
But both of them doesn't get any value.
3) If you set SYST data or constants in Transaction Launcher Wizard(Step5), you can find the data in ERP Web Dynpro.
Does anyone know which parameter gets the value of current opptunity data?
Or if you have any tips to create URLS using programing, could you please share the information with me?
BestRgards.
Miki

Does anyone have tips??

Rounded corners on push buttons ??

I need to make the push buttons on my form “look more like buttons”. It has been suggested that I try some type of shading. I would also like to make the corners rounded. Is there a way to do that in Oracle forms?
Thanks

Forms [32 Bit] Version 9.0.4.0.19 (Production)
Oracle Toolkit Version 9.0.4.0.31 (Production)
PL/SQL Version 9.0.1.5.1 (Production)
Oracle Procedure Builder V9.0.3.5.0 Build #1641 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 9.0.4.0.6 - Production
Oracle Virtual Graphics System Version 9.0.1.11.0 (Production)
Oracle Tools GUI Utilities Version 9.0.4.0.11 (Production)
Oracle Multimedia Version 9.0.4.0.11 (Production)
Oracle Tools Integration Version 9.0.4.0.0 (Production)
Oracle Tools Common Area Version 9.0.2.12.0
Oracle CORE 9.0.1.5.1 Production
By Web, do you mean does it run in Internet Explorer.
Yes, my application runs in IE.
If this applies to me, could I have more details where to find this?
Thanks.

How can I open a .pdf file in a browser on a click on a push button

I am using oracle 10g developer suit for form designing.
There is a .pdf file in the application server.
I want it to open it in a browser when a push button is clicked.
Could you please tell me how can I do that?
Regards

hi
u can use web.show_document() for that.
but if you want to open pdf file only then use
client_host()
sarah

Push button in alv report

Dear Experts,
         How to add pushbutton in alv report.....
*& Report ZTT_TEST_ALV
REPORT ZTT_TEST_ALV.
*data declarations
type-pools : SLIS.
* data : BEGIN OF wa_kna1,
*                kunnr type kunnr,
*                name1 type name1,
*         end of wa_kna1,
* it_kna1 like tABLE OF wa_kna1.
data : begin of wa_mara,
matnr type matnr,
end of wa_mara,
it_mara like table of wa_mara.
data : it_fcat type slis_t_fieldcat_alv,
         wa_fcat like line of it_fcat.
*selection screen
SELECTION-SCREEN begin of block k with frame title text-001.
* select-OPTIONS : s_kunnr for wa_kna1-kunnr.
     select-OPTIONS : s_matnr for wa_mara-matnr.
SELECTION-SCREEN end of block k.
*select auery
*SELECT kunnr name1 INTO table it_kna1 from kna1 where kunnr in s_kunnr.
select matnr into table it_mara from mara where matnr in s_matnr.
*for displaying fieldcatalog
PERFORM fcat using '1' 'MATNR' 'material Number' 'C410' '20'.
* PERFORM fcat using '2' 'NAME1' 'Customer Name' 'C410' '36'.
*for displaying output
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
*   I_CALLBACK_PROGRAM                = ' '
   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
*   I_CALLBACK_USER_COMMAND           = ' '
*   I_CALLBACK_TOP_OF_PAGE            = ' '
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
*   I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = 'Report for Customer Details'
*   I_GRID_SETTINGS                   =
*   IS_LAYOUT                         =
   IT_FIELDCAT                       = it_fcat[]
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
*   IS_VARIANT                        =
*   IT_EVENTS                         =
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   I_HTML_HEIGHT_TOP                 = 0
*   I_HTML_HEIGHT_END                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   IR_SALV_FULLSCREEN_ADAPTER        =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
TABLES
    t_outtab                          = it_mara.
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
* EXPORTING
****   I_INTERFACE_CHECK              = ' '
****   I_CALLBACK_PROGRAM             =
****   I_CALLBACK_PF_STATUS_SET       = ' '
****   I_CALLBACK_USER_COMMAND        = ' '
****   IS_LAYOUT                      =
*   IT_FIELDCAT                    = it_fcat
****   IT_EXCLUDING                   =
****   IT_SPECIAL_GROUPS              =
****   IT_SORT                        =
****   IT_FILTER                      =
****   IS_SEL_HIDE                    =
****   I_SCREEN_START_COLUMN          = 0
****   I_SCREEN_START_LINE            = 0
****   I_SCREEN_END_COLUMN            = 0
****   I_SCREEN_END_LINE              = 0
****   I_DEFAULT                      = 'X'
****   I_SAVE                         = ' '
****   IS_VARIANT                     =
****   IT_EVENTS                      =
****   IT_EVENT_EXIT                  =
***    i_tabname_header               =
***    i_tabname_item                 =
****   I_STRUCTURE_NAME_HEADER        =
****   I_STRUCTURE_NAME_ITEM          =
***    is_keyinfo                     =
****   IS_PRINT                       =
****   IS_REPREP_ID                   =
****   I_BYPASSING_BUFFER             =
****   I_BUFFER_ACTIVE                =
****   IR_SALV_HIERSEQ_ADAPTER        =
****   IT_EXCEPT_QINFO                =
****   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
**** IMPORTING
****   E_EXIT_CAUSED_BY_CALLER        =
****   ES_EXIT_CAUSED_BY_USER         =
* tables
**    t_outtab_header                = it_
*    t_outtab_item                  = it_kna1.
**** EXCEPTIONS
****   PROGRAM_ERROR                  = 1
****   OTHERS                         = 2
***IF sy-subrc <> 0.
**** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
****         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
***ENDIF.
*&      Form FCAT
*       text
*      -->P_0052   text
*      -->P_0053   text
*      -->P_0054   text
form FCAT using    fp_col_pos
                    fp_fieldname
                    fp_seltext_m
                    fp_emphasize
                    fp_outputlen..
wa_fcat-col_pos = fp_col_pos.
wa_fcat-fieldname = fp_fieldname.
wa_fcat-seltext_m = fp_seltext_m.
wa_fcat-emphasize = fp_emphasize.
wa_fcat-outputlen = fp_outputlen.
append wa_fcat to it_fcat.
clear : wa_fcat.
endform.                    " FCAT
FORM SET_PF_STATUS                                         .
SET PF-STATUS 'ZNEWSTATUS' .
"Copy of 'STANDARD' pf_status from fgroup SALV
endform.
i need one push button in alv output display.
Thanks and Regards,
Thirukumaran. R

HI THIRU TRY FOLLOWING CODES:
*& Report ZSAMPLE
REPORT ZSAMPLE.
TABLES:MARA.
TYPE-POOLS: SLIS.
TYPES:BEGIN OF TY_ITAB,
      MATNR LIKE MARA-MATNR,
      ERSDA LIKE MARA-ERSDA,
      END OF TY_ITAB.
DATA:ITAB TYPE STANDARD TABLE OF TY_ITAB WITH HEADER LINE.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV,
          WA_FCAT TYPE SLIS_FIELDCAT_ALV,
          LAYOUT TYPE SLIS_LAYOUT_ALV,
          WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:P_MATNR TYPE MARA-MATNR.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM FIELDCAT.
LAYOUT-ZEBRA = 'X'.
PERFORM OUTPUT.
*&      Form PF_STATUS
      text
     -->RT_EXTAB   text
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'BUTT'.
ENDFORM.                    "PF_STATUS
*&      Form PUSH_BUTT1
      text
     -->R_UCOMM      text
     -->RS_SELFIELD text
FORM GET USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'GET'.
      IF SY-SUBRC EQ 0.
        CALL TRANSACTION 'SE11'.
      ELSE.
      ENDIF.
    WHEN 'EXIT' OR 'CANCEL' .
      LEAVE PROGRAM.
ENDCASE.
ENDFORM.                                                    "PUSH_BUTT1
*&      Form FIELDCAT
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FCAT-SELTEXT_L = 'Select'.
WA_FCAT-COL_POS = '1'.
WA_FCAT-FIELDNAME = 'CHECK'.
WA_FCAT-CHECKBOX = 'X'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '4'.
WA_FCAT-INPUT(1) = 'X'.
WA_FCAT-EDIT_MASK(1) = 'X'.
WA_FCAT-EDIT(1) = 'X'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
WA_FCAT-SELTEXT_L = 'Material Number'.
WA_FCAT-COL_POS = '2'.
WA_FCAT-FIELDNAME = 'MATNR'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '18'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
WA_FCAT-SELTEXT_L = 'Date'.
WA_FCAT-COL_POS = '3'.
WA_FCAT-FIELDNAME = 'ERSDA'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '8'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
ENDFORM.                    " FIELDCAT
*&      Form OUTPUT
      text
--> p1        text
<-- p2        text
FORM OUTPUT .
SELECT MATNR ERSDA FROM MARA
    INTO TABLE ITAB
    WHERE MATNR EQ P_MATNR.
IF SY-SUBRC EQ 0.
    PERFORM GRID.
ELSE.
    MESSAGE 'No Records Found' TYPE 'I'.
ENDIF.
ENDFORM.                    " OUTPUT
*&      Form GRID
      text
--> p1        text
<-- p2        text
FORM GRID .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   I_CALLBACK_PROGRAM              = SY-REPID
   I_CALLBACK_PF_STATUS_SET        = 'PF_STATUS'
   I_CALLBACK_USER_COMMAND         = 'GET'
   IS_LAYOUT                         = LAYOUT
     IT_FIELDCAT                     = FCAT
   I_DEFAULT                         = 'X'
    TABLES
      T_OUTTAB                          = ITAB.
ENDFORM.                    " GRID
REGARDS,
SAKTHIVEL.VT

Creating a push button in Condition Tab in me21n

Hello Experts,
I want to add one push button in me21n PO creation.
Is this possible by using enhancement MM06E005?
Could you suggest something?
The push button will be in 'condition' tab in item level view.
After clicking this button a screen will be displayed if the condition
category is B to enter other subsequent vendor's code(which comes
after clicking on condition and viewing condition details) that is
in case of octroi costs.
Thanking you!

Hi ,
Yes you can do this in enhancement MM06E005.
Goto --> Tcode se51 -->program name : SAPLXM06
Screen No : 0111
Make the changes in this layout.So that changes will reflect to customer Data tab at Item level in Me21n.
Use tabstrip or create a subscreen for the above program name while creating a new screen..
This may helpfull to resolve your problem.
Thank you,
Thanks,
AMS

Issue with Icons display in PUSH BUTTONS in forms 11g

Hello,
This is regarding an issue with the icons background for the push buttons in the forms 11g. When we enable the icons for the buttons (.gif) they are visible on the
top left corner of the buttons and not in the centre. In one of the forums it was written like this is a common problem in Forms 11g. Is there any way by which we can
centralize this icons on the Forms buttons. Also I have heard that image editing tools can be used to centralize the icons. I tried with one of the tools but it seems
like it is not working.
Can somebody suggest a workaround for this?
Thanks in Advance
Ram

I will assume you are attempting to use the images included in the Forms applet jar. These images are purposely structured so that the subject is off-centered. You should not see that same behavior if you use your own images or edit the ones built-in to Forms. However, keep in mind that the images packaged in the Forms applet jar are intended to be used in a menu toolbar and not custom buttons.
For more information, refer to MyOracleSupport note 1391073.1 where I explain this in detail.
Michael Ferrante
Senior Principal Support Engineer
Forms Global Technical Lead
Oracle Corporation
.

How to display JPG Icons on push buttons

Hi there,
I have come to know that some changes are required in registry.dat file to get jpg images displayed on a push button. Please let me know about the changes required in detail.
Thanks

Ali,
for the registry dat file all the required informationm is in there. Create a virtual directory in your HTTP server to reference the physical directory that holds your images.Open registry.dat and scroll down a bit. You find the section where you can set the image type to use jpg or gif and the virtual path. Add your virtual path as shown in the examples in this file.
Just add the name of the jpg file, with no extension, to the button's icon name property.
Alternatively you can use jar files to hold icons too. If you do a search ion this forum then you'll find a lot of comments on that.
frank

Push button details in web ui of crm 6.0

Similar Messages

Maybe you are looking for