Pushbuttons on the screen

How can we create the pushbuttons on the Maintenanace view screen ont the table maintenance generator ?

HI....
u must have created function group while creating table maintainene for your table.
Now go to se80.Gie the name of the function group which you created.You will be able to see all tha screens and other details realted to your table.double click on the screen and go in chane mode.Whatever additions you wanna do you can do in this particular screen as in normal screen programmimg.You can add pushbuttons when and where needed.
Through this function group you can do the programmimg as needed.

Similar Messages

Adding functionality to the pushbuttons in selection screen

Hi,
Where to add the logic to the pushbutton in the selection screen.In the PBO or PAI of that screen.If possible can anyone send an example for that?

Hey!
Check out this sample code.
REPORT z_prog.
DATA:
BEGIN OF fs_spfli,
    carrid   LIKE spfli-carrid,        " Airline Code
    connid   LIKE spfli-connid,        " Flight Connection Number
    airpfrom LIKE spfli-airpfrom,      " Departure airport
    airpto   LIKE spfli-airpto,        " Destination airport
    deptime LIKE spfli-deptime,       " Departure time
    arrtime LIKE spfli-arrtime,       " Arrival time
END OF fs_spfli,
BEGIN OF fs_sflight,
    carrid   LIKE sflight-carrid,       " Airline Code
    connid   LIKE sflight-connid,       " Flight Connection Number
    fldate   LIKE sflight-fldate,       " Flight date
    seatsmax LIKE sflight-seatsmax,     " Maximum seats in economy class
    seatsocc LIKE sflight-seatsocc,     " Occupied seats in economyclass
END OF fs_sflight,
w_checkbox TYPE c,                    " Variable for checkbox
w_currentline TYPE i,                 " Variable to display current
                                        " line
w_lines TYPE i,
w_read TYPE c .
* Internal Table to hold flight schedule information                  *
DATA:
t_spfli LIKE
    TABLE OF
          fs_spfli.
* Internal Table to hold flight information                           *
DATA:
t_sflight LIKE
      TABLE OF
            fs_sflight,
t_sflight1 LIKE t_sflight.
*    START-OF-SELECTION Event                                         *
START-OF-SELECTION.
PERFORM get_data_spfli.
*    END-OF-SELECTION Event                                           *
END-OF-SELECTION.
SET PF-STATUS 'MENU'.
PERFORM display_data_spfli.
*    TOP-OF-PAGE Event                                                *
TOP-OF-PAGE.
PERFORM header_table_spfli.
*    AT LINE-SELECTION EVENT                                          *
AT LINE-SELECTION.
SET PF-STATUS space.
IF sy-lsind EQ 1 AND sy-lilli GE 4.
    PERFORM get_data_sflight.
    PERFORM display_data_sflight.
    PERFORM flag_line.
ENDIF.                               " IF sy-lsind EQ 1..
*    AT USER-COMMAND                                                  *
AT USER-COMMAND.
IF sy-lsind EQ 1.
    SET PF-STATUS space.
    CASE sy-ucomm.
      WHEN 'DISPLAY'.
        PERFORM get_data_sflight1.
        PERFORM display_data_sflight.
      WHEN 'SELECTALL'.
        PERFORM select_all.
        PERFORM flag_line.
      WHEN 'DESELECTAL'.
        PERFORM deselect_all.
        PERFORM flag_line.
    ENDCASE.                           " CASE sy-ucomm
ENDIF.                               " IF sy-lsind EQ 1
*    TOP-OF-PAGE DURING LINE-SELECTION                                *
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM sec_list_heading.
*&      Form get_data_spfli
* This subroutine fetches the data from SPFLI
* This subroutine does not have parameters to pass
FORM get_data_spfli .
SELECT carrid                        " Airline Code
         connid                        " Flight Connection Number
         airpfrom                      " Departure airport
         airpto                        " Destination airport
         deptime                       " Departure time
         arrtime                       " Arrival time
    FROM spfli
    INTO TABLE t_spfli.
ENDFORM.                               " GET_DATA_SPFLI
*&      Form display_data_spfli
* This subroutine displays the data of SPFLI
* This subroutine does not have parameters to pass
FORM display_data_spfli .
LOOP AT t_spfli INTO fs_spfli.
    WRITE: /02 w_checkbox AS CHECKBOX,
            05 w_read,
               fs_spfli-carrid UNDER text-001,
               fs_spfli-connid UNDER text-002,
               fs_spfli-airpfrom UNDER text-003,
               fs_spfli-airpto UNDER text-004,
               fs_spfli-deptime UNDER text-005,
               fs_spfli-arrtime UNDER text-006.
    HIDE:
      fs_spfli-carrid,
      fs_spfli-connid.
ENDLOOP.                             " LOOP AT t_spfli..
ENDFORM.                               " DISPLAY_DATA_SPFLI
*&      Form header_table_spfli
* This subroutine diplays the headings of table spfli
* This subroutine does not have parameters to pass
FORM header_table_spfli .
WRITE: /10 text-001 COLOR 4,
          25 text-002 COLOR 4,
          40 text-003 COLOR 4,
          55 text-004 COLOR 4,
          70 text-005 COLOR 4,
          85 text-006 COLOR 4.
ENDFORM.                               " HEADER_TABLE
*&      Form get_data_sflight
* This subroutine fetches the data from SFLIGHT
* This subroutine does not have interface parameters to pass
FORM get_data_sflight .
SELECT carrid                        " Airline Code
         connid                        " Flight Connection Number
         fldate                        " Flight date
         seatsmax                      " Maximum seats in economy class
         seatsocc                      " Occupied seats in economyclass
    FROM sflight
    INTO TABLE t_sflight
   WHERE carrid EQ fs_spfli-carrid
     AND connid EQ fs_spfli-connid.
ENDFORM.                               " GET_DATA_SFLIGHT
*&      Form display_data_sflight
* This subroutine displays the SFLIGHT data
* This subroutine does not have interface parameters to pass
FORM display_data_sflight .
LOOP AT t_sflight INTO fs_sflight.
    WRITE: / fs_sflight-carrid UNDER text-001,
             fs_sflight-connid UNDER text-002,
             fs_sflight-fldate UNDER text-007,
             fs_sflight-seatsmax UNDER text-008 LEFT-JUSTIFIED,
             fs_sflight-seatsocc UNDER text-009 LEFT-JUSTIFIED.
ENDLOOP.
    CLEAR: fs_sflight.
ENDFORM.                               " DISPLAY_DATA_sflight
*&      Form sec_list_heading
* This subroutine diplays the headings of table spfli
* This subroutine does not have interface parameters to pass
FORM sec_list_heading .
WRITE: /2 text-001 COLOR 4,
         15 text-002 COLOR 4,
         33 text-007 COLOR 4,
         45 text-008 COLOR 4,
         60 text-009 COLOR 4.
ENDFORM.                               " SEC_LIST_HEADING
*&      Form get_data_sflight1
* This subroutine displays the data from SFLIGHT according to checkbox
* clicked.
* This subroutine does not have interface parameters to pass
FORM get_data_sflight1 .
DATA:
    lw_checkbox TYPE c.
DESCRIBE TABLE t_spfli LINES w_lines.
DO w_lines TIMES.
    w_currentline = 3 + sy-index.
    CLEAR:
      w_checkbox,
      fs_spfli.
    READ LINE w_currentline FIELD VALUE
      w_checkbox INTO lw_checkbox
      fs_spfli-carrid INTO fs_spfli-carrid
      fs_spfli-connid INTO fs_spfli-connid.
    IF sy-subrc EQ 0.
      IF lw_checkbox EQ 'X'.
        SELECT carrid                  " Airline Code
               connid                  " Flight Connection Number
               fldate                  " Flight Date
               seatsmax                " Max Seats
               seatsocc                " Occupied Seats
          FROM sflight
          INTO TABLE t_sflight1
         WHERE carrid EQ fs_spfli-carrid
           AND connid EQ fs_spfli-connid.
        IF sy-subrc EQ 0.
          APPEND LINES OF t_sflight1 TO t_sflight.
        ENDIF.                         " IF sy-subrc EQ 0.
      ENDIF.                           " IF lw_checkbox EQ 'X'
    ENDIF.                             " IF sy-subrc EQ 0.
ENDDO.                               " DO w_lines TIMES
ENDFORM.                               " GET_DATA_SFLIGHT1
*&      Form select_all
* This subroutine selects all the records of SPFLI
* This subroutine does not have interface parameters to pass
FORM select_all .
DESCRIBE TABLE t_spfli LINES w_lines.
DO w_lines TIMES.
    w_currentline = sy-index + 3.
    READ LINE w_currentline FIELD VALUE
    w_checkbox INTO w_checkbox.
    IF sy-subrc = 0.
      MODIFY LINE w_currentline FIELD VALUE
      w_checkbox FROM 'X'.
    ENDIF.                             " IF sy-subrc = 0.
ENDDO.                               " DO lw_line TIMES.
ENDFORM.                               " SELECT_ALL
*&      Form deselect_all
* This subroutine deselects all the records of SPFLI
* This subroutine does not have interface parameters to pass
FORM deselect_all .
DESCRIBE TABLE t_spfli LINES w_lines.
DO w_lines TIMES.
    w_currentline = sy-index + 3.
    READ LINE w_currentline FIELD VALUE
    w_checkbox INTO w_checkbox.
    IF sy-subrc = 0.
      MODIFY LINE w_currentline FIELD VALUE
      w_checkbox FROM ' '.
    ENDIF.                             " IF sy-subrc = 0.
ENDDO.                               " DO lw_line TIMES.
ENDFORM.                               " DESELECT_ALL
*&      Form flag_line
* This subroutine flags the line which has been read
* This subroutine does not have interface parameters to pass
FORM flag_line .
DESCRIBE TABLE t_spfli LINES w_lines.
DO w_lines TIMES.
    w_checkbox = 'X'.
    READ LINE sy-lilli FIELD VALUE
      w_read INTO w_read
      w_checkbox INTO w_checkbox.
    IF sy-subrc EQ 0.
      MODIFY CURRENT LINE
      FIELD FORMAT w_checkbox INPUT OFF
      FIELD VALUE w_read FROM '*'.
    ENDIF.                             " IF sy-subrc EQ 0
ENDDO.                               " DO w_lines TIMES
ENDFORM.                               " FLAG_LINE
Regards
Abhijeet
Edited by: Abhijeet Kulshreshtha on Jul 11, 2008 9:10 AM

Is it possible to add pushbuttons to the SAP Easy Access Front Screen ?

Dear gurus.
Is it possible to add pushbuttons to the SAP Easy Access Front Screen when a person logs in?
if so how can we achieve it ?
Regards
Saad Nisar.

SAP Standard Menu
SAP Standard Menu helps you in including your own menu within the Sap menu bar .It helps us in making own function related to the program, sub routines or any transaction. The main advantage of this standard menu is that u can even modify this menu according to your client or project needs.
The main advantage of the SAP Menu bar is that it can find specific transaction without knowing the transaction code.           SAP Menu is determined by the task you are doing in the SAP R/3 system.
Menu are like Drop down list ,as when you click on any particular menu item, further options will be displayed.
You can have as many as standard menu bar in the SAP Standard menu.
The SAP Menu Bar contains the menus for the functional and administrative areas of the system.
Features of the Sap Menu Bar are as Follows
Menu     Description
System     It contains all the function that affect the system as a whole such as Create session, User profile and Log off
Help     This menu provide various types of online help that are available in R/3 system
Following are the Steps how to modify the SAP Standard Menu Bar
Transaction code SE41 is used for displaying the Menu Painter Menu.
Now in the Program field ,Type the MENUSYST as the Program Name.
Now in the Status field choose the option MEN by using the F4 help .
After choosing the MEN option for the Status field, click on the Change then the Following Screen will be displayed
Click OK and move Forward , it is just Alerting that Menusyst is a user interface .
After that the Following screen will appear with Modify Status Men in Program MENUSYST
Double click on the Menu bar shown in the Left side of the Screen .Such as the Menu bar will open .
Double click on the System such that list of menu will be displayed .
Now you can See there are two columns present in the system menu ,One is Code column and other is Text column. Right Click on your desired location of these two column such that it will show the option.
From the option menu choose the option Insert Entry . By choosing this option a new row is inserted in the System menu . when the New row is inserted then type Menu in the code field and My Option in the Text Field as follows. Both the code field and the Text Field name depends on your requirments.
Now Double click on the Menu of the Code field such that Function attributes window will open.
In the fuction type choose the function type as T (Call a transaction).and then Click Ok.
After Selecting the Function type . Click on the Ok button of the fucntion Attruibute Screen .
After that activate the Function by selecting the Menu in the code field and click on the Fucntion Code button Present on the top of the Sap Screen .
Now Save (Ctrl +S ) interface of the program MENUSYST .
Now Activate (Ctrl + F3) interface MENUSYST as follows .
Now Come to the Initial screen of the Menu Painter i.e . SE 41 ,so as to test the modified SAP Statndard Menu ( by Pressing F3 ) and Type the Program As MENUSYST and status as MEN and then Click Test Button .
After clicking the Test Button the Status Simulation Screen will appear , just click Excute button on that popup screen.
Now the Menu Painter Intial Screen will appear such that you can test your function code there. Now Click on the System menu in the Menu Bar
After clicking to the System Menu , the list of the option will open and our Customized /Modified SAP Menu will appear into it as follows .
Now you can See that the My Option Menu appears on the Standard System Menu. There are various Advantages of the modification of the Standard Menu which are discussed as follows .
     Code Flexibility, As We can choose our own predefined Standard Menu fucntion in the Program as required by the client.
     Independency . Sap program is independent of various other supporting program that are supporting to the defined function.
     Ease of Code . More Uniformity is established between the Standard Menu function.We can include our own predefined fucntion module within this standard function module
Deactivating of the SAP Standard Menu
You can just move to the MENUSYST Prgram through SE41 Transaction Code . then Select the MENU option which you had customized and then click the Function Code again in the SAP screen.
Then Message will be Displayed that Function MENU is Deactivated as follows .
Now Save and Activate the interface MENUSYST. Test the Program using the Initial Screen SE41
And check the System menu in the Menu bar ,then the My Option Menu is deactivated .

Pushbutton at the start of the screen

Hi,
Does anybody knows how to display a push button at the begining of the screen?
I used set PF status but since only does push button which is i needed to display. GUI status is not working...
Please help...
Thank you..
regards,
mae

Hi,
refer the below code.
Tables: MARA.
DATA : BEGIN OF T_ITTAB occurs 0 ,
MATNR LIKE MARA-MATNR ,
ERNAM LIKE MARA-ERNAM ,
END OF T_ITTAB .
SELECTION-SCREEN BEGIN OF SCREEN 1001 .
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-100 .
SELECT-OPTIONS S_VAR FOR MARA-MATNR .
SELECTION-SCREEN PUSHBUTTON /10(20) PB USER-COMMAND CRET.
SELECTION-SCREEN END OF BLOCK BLK .
SELECTION-SCREEN END OF SCREEN 1001 .
CALL SCREEN 1001 .
initialization.
MOVE 'My text' TO pb.
AT SELECTION-SCREEN.
IF SY-UCOMM EQ 'CRET' .
SELECT MATNR ERNAM
FROM MARA
INTO TABLE T_ITTAB.
ENDIF.
START-OF-SELECTION .
LOOP AT T_ITTAB .
WRITE :/ T_ITTAB .
ENDLOOP .
Reward if useful.
Thanks,
Sreeram.

Problem in the code while fetching records and displaying in the screen

Hi,
   I have developed a screen which is having various fields, all the records are stored in a ztable,when i enter the records into various i/o fields and press submit pushbutton they are stored in the table now, what i wont is when i enter one record the (primary one) and press enter the corresponding records of that record should be shown in the i/o fields means they should be fetched back from the d/b table and displayed on the screen. For this i Have written a code please see it once.
TABLES : ZFISALDT.
DATA ITAB LIKE ZFISALDT OCCURS 0 WITH HEADER LINE.
ZFISALDT-BILLINGDOCU = ITAB-BILLINGDOCU.
ZFISALDT-SALESDOCU = ITAB-SALESDOCU.
ZFISALDT-FORM402 = ITAB-FORM402.
ZFISALDT-SALESTAXFORM = ITAB-SALESTAXFORM.
ZFISALDT-FREIGHTDOCNO = ITAB-FREIGHTDOCNO.
ZFISALDT-FPARTYNAME = ITAB-FPARTYNAME.
*&      Module STATUS_5555 OUTPUT
      text
MODULE STATUS_5555 OUTPUT.
SET PF-STATUS 'SALALL'.
SET TITLEBAR 'SAL'.
ENDMODULE.                 " STATUS_5555 OUTPUT
*&      Module USER_COMMAND_5555 INPUT
      text
MODULE USER_COMMAND_5555 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'SUB'.
IF ZFISALDT-BILLINGDOCU = ' '
OR ZFISALDT-SALESDOCU = ' '.
MESSAGE 'PLEASE FIRST SUBMIT THE BILLING DOCUMENT NO AND SALES DOCUMENT NO' TYPE 'E'.
ENDIF.
ZFISALDT-BILLINGDOCU = ZFISALDT-BILLINGDOCU.
ZFISALDT-SALESDOCU = ZFISALDT-SALESDOCU.
ZFISALDT-FORM402 = ZFISALDT-FORM402.
ZFISALDT-SALESTAXFORM = ZFISALDT-SALESTAXFORM.
*ZFISALDT-FREIGHTDOCNO = ZFISALDT-FREIGHTDOCNO.
*ZFISALDT-FPARTYNAME = ZFISALDT-FPARTYNAME.
*SUBMIT ITAB.
WHEN ' '.   (THIS THE PART OF CODE WHICH IS NOT WORKING)
SELECT * FROM ZFISALDT INTO corresponding fields of TABLE ITAB WHERE BILLINGDOCU = ZFISALDT-BILLINGDOCU.
ITAB-BILLINGDOCU = ZFISALDT-BILLINGDOCU.
ITAB-SALESDOCU = ZFISALDT-SALESDOCU.
ITAB-FORM402 = ZFISALDT-FORM402.
*ZFISALDT-BILLINGDOCU = ITAB-BILLINGDOCU.
*ZFISALDT-BILLINGDOCU = ITAB-BILLINGDOCU.
*ZFISALDT-SALESDOCU = ITAB-SALESDOCU.
*ZFISALDT-FORM402 = ITAB-FORM402.
*ZFISALDT-SALESTAXFORM = ITAB-SALESTAXFORM.
append ITAB.                                                      (ALSO USED INSERT BUT NOT WORKING)
WHEN 'ENTER'.
IF ZFISALDT-BILLINGDOCU = ' '
OR ZFISALDT-SALESDOCU = ' '.
MESSAGE 'PLEASE FIRST SUBMIT THE BILLING DOCUMENT NO AND SALES DOCUMENT NO' TYPE 'E'.
ENDIF.
ZFISALDT-FREIGHTDOCNO = ZFISALDT-FREIGHTDOCNO.
ZFISALDT-FPARTYNAME = ZFISALDT-FPARTYNAME.
ZFISALDT-FREIGHTBILLNO = ZFISALDT-FREIGHTBILLNO.
ZFISALDT-FREIGHTDATE = ZFISALDT-FREIGHTDATE.
ZFISALDT-TRUCKNO = ZFISALDT-TRUCKNO.
ZFISALDT-FREIGHTAMOUNT = ZFISALDT-FREIGHTAMOUNT.
ZFISALDT-COMNAGBILL = ZFISALDT-COMNAGBILL.
ZFISALDT-AGENTNAME = ZFISALDT-AGENTNAME.
ZFISALDT-CAGDATE = ZFISALDT-CAGDATE.
ZFISALDT-CMNAGAMOUNT = ZFISALDT-CMNAGAMOUNT.
ZFISALDT-SHIPMENTNAME = ZFISALDT-SHIPMENTNAME.
ZFISALDT-SHIPDOCUNO = ZFISALDT-SHIPDOCUNO.
ZFISALDT-SHIPBILLNO = ZFISALDT-SHIPBILLNO.
ZFISALDT-SHIPBILLDATE = ZFISALDT-SHIPBILLDATE.
ZFISALDT-BLNOGOV = ZFISALDT-BLNOGOV.
ZFISALDT-CHAAGENTNAME = ZFISALDT-CHAAGENTNAME.
ZFISALDT-CHABILL = ZFISALDT-CHABILL.
ZFISALDT-CHADATE = ZFISALDT-CHADATE.
ZFISALDT-CHAAMOUNT = ZFISALDT-CHAAMOUNT.
ZFISALDT-B_L_NO = ZFISALDT-B_L_NO.
ZFISALDT-B_L_NODATE = ZFISALDT-B_L_NODATE.
ZFISALDT-DEPBLICNO = ZFISALDT-DEPBLICNO.
ZFISALDT-LICENCE_DATE = ZFISALDT-LICENCE_DATE.
ZFISALDT-FOC_VALUE = ZFISALDT-FOC_VALUE.
ZFISALDT-DEPB_VALUE = ZFISALDT-DEPB_VALUE.
INSERT ZFISALDT.
CLEAR ZFISALDT.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_5555 INPUT
This is the code please check it once.
Thanks in advance.

Hi Sumeet.
WHEN ' '. " (THIS THE PART OF CODE WHICH IS NOT WORKING)
SELECT * FROM ZFISALDT INTO corresponding fields of TABLE ITAB WHERE BILLINGDOCU = ZFISALDT-BILLINGDOCU.
" here in where condition u r checking with ZFISALDT-BILLINGDOCU, i guess there is no value in that, Once check in debugging mode and proceed further.
Regards,
Aby

How to change the screen field text in runtime

Hi ,
I want to change the screen button text in runtime IN ABAP dynpro screens. if anybody know this please post some helpful answer
Regards,
Anil kumar G

Hi Anil..
We can change the Text of a Pushbutton dynamically.
For this:
1. Declare a Global variable with the Same name as the Button in TOP include
Eg:   Data: Button1(30).
2. In the PBO module of the Screen assign the Text to this variable:
   Eg:
    Module set_text OUTPUT.
        Button1 = 'This is the text'.
    ENDMODULE.
<b>REWARD IF HELPFUL.</b>

To set the timer in the Screen for online test

Hi all,
This is sujoy here....
i am developing a tool in SAP for Evaluation /test of any subject or topic where i have to incorporate the Timer Concepts as i will set this in the screen which where remaining time will decrease after each second like Online Test using web pages and after a predefined duration of 30 min( or 45 min or something like that) when that preset time is elapsed completly,the "SUBMIT" pushbutton will be Triggered automatically( if candidate does not press it within the duration).
Is there any FM or Program regarding this concepts...
Need your help...
Regards,
Sujoy

Hi Sujoy,
Addition to my previous post..Use the JavaScript I mentioned in my previous post in the onload of your BSP page. And after 30 minutes or so submit the form, you need to make a addition to the java script given in that link.
See this code:
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<head>
<SCRIPT LANGUAGE = "JavaScript">

</SCRIPT>
</head>
<htmlb:content design="design2003" >
<htmlb:page title = "Timer test application "
              onLoad = "InitializeTimer()" >
    <htmlb:form id="form1" >
      <htmlb:button text    = "Submit"
                    id      = "but01"
                    onClick = "myEvent" />
    </htmlb:form>
</htmlb:page>
</htmlb:content>
OnInputProcessing you navigate to next page using
navigation->goto_page( 'second.htm' ).
Hope this helps...
Regards,
Ravikiran.

Can we add a pushbutton on the list ?

Hi,
I have to print a internal table and a push button after the list.
I can do it by SE41 but that can't be done at the end of the list. Is there any way to put pushbutton at the end of the list.
or can we write a internal table contents on the selection screen. Note that Internal table contents are not fixed and vary each time records are selected.
Thanks
Manoj

hi,
To create a pushbutton on the selection screen (similar to pushbuttons on screens), you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREEN event.

Pushbutton on the application bar on an abap report

Hello All,
I need to have a pushbutton (labelled Download) on the application bar on the abap report screen .
This button should enable me to download the report contents in a file format (like excel).
Please can you guys help me acheive this.How should the button with this functionality be placed in application bar?
Thanks in advance for the kind help
Swati

Hi Swathi,
In such case, as said above, create a new GUi status and then assign to the report using the below statement:
AT PFnn.
Effect
This obsolete statement defines an event block whose event is triggered by the ABAP runtime environment during list display - provided the screen cursor is on a list line and a function is selected using the function code PFnn. Here nn stands for a number between 01 and 24. In the standard list status, these function codes are assigned to the function keys of the input device.
Then what processing needs to be done when the user presses the button, will be written in the below control statement..
AT USER-COMMAND
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment if, during the display of a screen list, a function with a self-defined function code was chosen.
Note
Self-defined function codes are all those that include character combinations, except for the following:
The function codes "PICK" and "PFnn" ("nn"stands for 01 to 24) do not cause the event AT USER-COMMAND, but the events AT LINE-SELECTION and AT PFnn.
All function codes that start with the character "%" are interpreted as system functions and do not cause the event AT USER-COMMAND. The system functions for lists are listed in the following table 1.
The function codes in the following table 2, likewise, do not cause the event AT USER-COMMAND, but are handled by the list processor.
Table 1
Function code Function
%CTX Call a context menu
%EX Exit
%PC Save to file
%PRI Print
%SC Search for ...
%SC+ Find next
%SL Search in office
%ST Save to report tree
Table 2
Function code Function
BACK Back
P- Scroll to previous page
P-- Scroll to first page
P+ Scroll to next page
P++ Scroll to last page
PFILE name Store list lines in a text file named "abap.lst" in standard character representation in the standard directory of the application server. If a name is entered using name, this is converted to lowercase letters and used as the file name.
PL- Scroll to first line of the page
PL-n Scroll n lines back
PL+ Scroll to last line of the page
PL+n Scroll n lines up
PNOP No effect
PP- Scroll back one page
PP-n Scroll n pages back
PP+ Scroll one page forward
PP+n Scroll n pages forwad
PPn Scroll to beginning of page n
PRI, PRINT Print
PS-- Scroll to first column
PS++ Scroll to last column
PS- Scroll one column to the left
PS-n Scroll n columns to the left
PS+ Scroll one column to the right
PS+n Scroll n columns to the right
PSn Scroll to column n
PZn Scroll to line n
RW Cancel
Example
This program works with a self-defined GUI status MYLIST. The function that is linked there with the function code MY_SELECTION causes the event AT USER-COMMAND during list display and also creates details lists.
REPORT demo_at_user_command.
START-OF-SELECTION.
SET PF-STATUS 'MYLIST'.
WRITE 'List line'.
AT USER-COMMAND.
IF sy-lsind = 20.
    SET PF-STATUS 'MYLIST' EXCLUDING 'MY_SELECTION'.
ENDIF.
CASE sy-ucomm.
    WHEN 'MY_SELECTION'.
      WRITE: / 'You worked on list', sy-listi,
             / 'You are on list', sy-lsind.
ENDCASE.
Regards
Shiva

Pushbutton in selection screen

Hi all
i want to deactivate a pushbutton in selection screen.
please help me...its urgent
   rewards assured..

Hi gaurav,
1. So, wats the use of MODIF ID?
or wats the flaw in my approach
Theres no flaw in your approach.
2. Further, you are right.
   Whats the use of MODIF ID
For buttons, we can use the name of the button.
3. But if there is some parameter
   (along with LABEL on the left,
   or a radiobutton, with some text),
4.
Then with MODIF ID, the label also gets
affected.
(whereas if we just use the parameter name,
the label may still remain)
5. To get the differnce, just copy paste
6.
report abc.
parameter : abc(10) type c MODIF ID A.
At selection-screen output.
ONCE CHECK WITH THIS CODE
loop at screen.
    if screen-name = 'ABC'.
      screen-input = 0.
      screen-invisible = 1.
      modify screen.
    endif.
endloop.
THEN CHECK WITH THIS CODE
   loop at screen.
   if screen-GROUP1 = 'A'.
     screen-input = 0.
     screen-invisible = 1.
     modify screen.
   endif.
endloop.
regards,
amit m.

Calling a screen at pushbutton in selection screen

hii all,
please provide me the suitable code for calling a screen on pushbutton in selection screen....
thanks
babbal

TABLES: SSCRFIELDS.
TYPE-POOLS ICON.
DATA: FUNCTXT TYPE SMP_DYNTXT.
PARAMETERS: P_VBELN LIKE VBAK-VBELN.
SELECTION-SCREEN: FUNCTION KEY 1.
INITIALIZATION.
FUNCTXT-ICON_ID   = ICON_NEXT_OBJECT.
FUNCTXT-ICON_TEXT = 'PUSHBUTTON'.
SSCRFIELDS-FUNCTXT_01 = FUNCTXT.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
    WHEN 'FC01'.
      CALL SCREEN 100.
ENDCASE.
regards,
prakash reddy .s

Get TEXT OF Pushbutton on selection-screen

HI ,
   How can i get the name of the pushbutton on the selection-screen.

Dear Arun,
First of all Thanks for giving me points for your 'Time Query'.
It was my first inauguration in sdn.
Regarding this 'Button Name' Query,
It seems to me that your problem is still not solved.
All the answers provided do 'Something Else'
and your 'Real Questions' remains unsolved.
Its a very good question. I also tried much and
presently conclude that for achieving this :
1. Some Discipline in Naming Convention has to be followed.
2. This discipline is between
    a) Name of button
    b) user command for this button
3. I have written a sample code in which
    a) 3 buttons appear on screen.
    b) press any one button
    c) then press 'Execute' Button For displaying name
4. The main logic is to
    a) search by using a 'Loop at Screen'
    b) In the loop, in the name field search the ucomm.
5. I hope this will be satisfactory till time. If it get
something more, i will let u know.
6. Once again please give points if u feel satisfied.
Thanks & Regards,
Amit Mittal.
REPORT abc.
DATA : btnname(8) TYPE c.
REQUIRED
TABLES sscrfields.
Create Button
Note : Name Of Button 'U1_HELLO'
        Starts with 'U1' (assigned user command)
        This kind of discipline required
SELECTION-SCREEN PUSHBUTTON /10(20) u1_hello USER-COMMAND u1.
SELECTION-SCREEN PUSHBUTTON /10(20) u2_hello USER-COMMAND u2.
SELECTION-SCREEN PUSHBUTTON /10(20) u3_hello USER-COMMAND u3.
Init
INITIALIZATION.
MOVE 'BUTTON 1' TO u1_hello.
MOVE 'BUTTON 2' TO u2_hello.
MOVE 'BUTTON 3' TO u3_hello.
AT SELECTION-SCREEN.
*------- Loop at Screen
LOOP AT SCREEN.
    IF screen-name CS sscrfields-ucomm.
FOUND
      btnname = screen-name.
    ENDIF.
ENDLOOP.
END-OF-SELECTION.
WRITE: 'BUTTON NAME IS ' , btnname.

How to add an icon for ok code at the bottom of the screen.

hi,
I have designed a screen with a table control.
I want to have at the end of the screen a ok and a cancel button.
For example in menu painter on top we have a icon for going back, exit etc.
At the same way at the bottom of the screen i need to have a tick icon. How to add it at the end of the screen.

Hi Josephine
Please proceed as below:
1. SE51.
2. Change the layout.
3. Add 2 pushbuttons at your desired location.
4. Double click on each button for Attributes.
5. In the attributes, give the Name, Text.
6. Select the Icon Name from the list: Eg: ICON_OKAY and ICON_CANCEL.
7. Go back to layout.
8. Save & Activate
9. Now you can test the screen to check the icons displayed in the screen.
Hope this helps.
Kind Regards
Eswar

Regarding to pushbutton in std screen

hai abapers
can we place pushbutton in standard screen(not in menu bar,application tool bar),is it possible with any screen exit?
Edited by: vinatha chittaluri on Dec 18, 2007 7:44 AM

you can modify the standard screen as long as you have screen exit available for it....
you can add and program push button as well...

HAVE NEW 13.3 MAC AIR AND when using it to open sites in safari I have no issue until I go to a link page that is a pdf file or I am trying to save the screen info as a pdf. I only get a black screen with no data, cannot find solution in help menu

HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
when i open sites in safari the page opens fine if it is not a pdf based page.
Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)

If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.

Pushbuttons on the screen

Similar Messages

Maybe you are looking for