Put IP's that answer into a list?

Hello i posted a post before and now i have come a little bit further in my project. I now have a program that you write a ip in and the program shows what instrument it is if the ip is connected and answer. What i have to do is to read a list of ip addresses and for those ip's that are connected i put them in a list and for those that are not connected i will ignore.
Form the list of the connected instruments i just made i then want to be able to choose one of the ip's that i want to check what instrument it is. I now wonder how i can search trough a list of ip's and then put them in to a list so i can click on them to choose them?

When you say IPs do you mean IP addresses? If so, they are simple strings so you would store you list in an array of strings.
To allow people to select one, you can put this array of strings into a single column listbox and use an event structure to tell when the user double-clicks of one of the items.
Or selects an item and clicks an OK button.
Or either.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

How to view data from infopath form that submit into sharepoint list into another page in sharepoint

what I want to do is, User A as administrator, will fill in the form. Next User A will assign task to User B, to complete the form. when User B open the form, the above part of the form will displayed data that fill by User A. Field that User B need to fill
in is at the below of the form.
may I know how to do it step by step? Thank you for your answer.
Azuaniza Ariffin

Hi,
I saw a similar post by you on this forum, and to achieve the functionality you can try using InfoPath Form or JQuery with SPService to make part of the Form as Readonly. and in conjunction use SharePoint designer to create a workflow to assign task or send
email to user B.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d02389be-f267-4c09-baf1-d85a5429bafb/set-field-value-and-make-field-read-only-on-custom-list-form?forum=sharepointgenerallegacy
http://www.sharepointdiary.com/2013/07/how-to-make-sharepoint-list-column-form-field-read-only.html#ixzz2aH103rcM
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

I see an "archive" group listed in the ibook catagories section. How do i put the books that I've read into that catagory?

I see an "archive" group listed in the ibook catagories section. How do i put the books that I've read into that catagory?

Are you sure that you are not talking about the Kindle App? I might be missing it, but I don't see an Archive section in iBooks categories.
You can create a section for the books that you have read in collections in the iBooks app.
Tap on Collections, tap New - name it Archived if that is what you want to call it. Tap Done, then tap the bookshelf anywhere. Tap the Edit button, tap the books that you want to move to Archved - tap Move in the upper left and select Archived.

Can you export the date and user to Excel that appears into a Comments field in a tracking list?

Hi everyone,
Can you export the date and user to Excel that appears into a Comments field in a tracking list?
When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
In the Comments field appears also, besides the comment text, the user and date from who and when the comment is added.
Is there a way to export also the user and the date?
Thanks
Wim

create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
updating that field with the new comments (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
Please refer few more links: Hope they will help
http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
http://community.office365.com/en-us/f/154/t/278560.aspx
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message. How can I change the mail settings so that every reply is listed

When I receive and answer e-mail, the correspondence is usually "nested" "behind" the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox. How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message. I'm afraid I might accidentially overlook messages the way they are handled now.

Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread". I think that will make each message show individually.

I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content

I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols. What is going wrong?

You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.

Hi... I am looking for an inexpensive app for my macbook pro that I can put pictures and videos together into a slideshow with captions and music WITHOUT a watermark and that also will burn the slideshow to a DVD in its own app. Help?

Hi... I am looking for an inexpensive app for my macbook pro that I can put pictures and videos together into a slideshow with captions and music WITHOUT a watermark and that also will burn the slideshow to a DVD in its own app. Help?

The issue with the A1400 is that like most economy compact cameras, they will not have very fast focus times in indoor lighting situations. Many people have gone to entry level DSLR's (Canon T3i) or micro 4/3 cameras. They are fairly expensive, but a late model refurbished T3i can sometimes be found with a kit lens for about $300.00. With Auto and scene modes, as well as full manual modes, these are very versatile cameras that focus very quickly, even in lower lighting situations. Canon is not really into the micro 4/3 cameras, instead they are focusing on the new G7x and G1x cameras, which are way out of your price range. The A720 is still available used at some places such as KEH camera, but you'll need to check often as their stock changes constantly. Obviously the DSLR's don't use AA batteries, but the T3i is good for about 600 photos (or more) per charge.
My refurbished DSLR was practically brand new condition when I got it. I could not find any sign of wear at all, so I feel they are a real bargain. These are rugged cameras that are made to last. The A1400 is a $99.00 camera, so it's not intended for heavy usage, plus the image quality of a DSLR (even entry level) is far better than the A1400. That would be my recommendation.
Steve M.

HT204053 I put an iTunes gift card into my iTunes app and wanted to use it to buy more iCloud storage. How do I do that? iTunes and iCloud are different accounts. Help

I put an iTunes gift card into my iTunes app and wanted to use it to buy more iCloud storage. How do I do that? iTunes and iCloud are different accounts. Help

Not on your own. Click here and ask the iTunes Store staff to put it back onto the card; they'll only do this if none of the balance has been spent.
(115868)

While listening to a podcast on my iPhone I can e-mail the podcast ID. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer.

While listening to a podcast on my iPhone I can e-mail the podcast ID to share it with someone else. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer. Months ago when I would e-mail myself the url all I had to do was click on the link in the e-mail and it took me right to the specific podcast in iTunes. Now it only opens iTunes and I can't figure out how to find the specific one. What good is the e-mail tab on the iPhone if it doesn't connect you to the podcast you sent?

Same here. I just posted a question too.

My IPad is requesting that sign into iCloud. When I put in my password it tells me that it is incorrect and to try to reset. When do that it sill won't let me. This is enabling me from doing anything on my iPad. How do I get around this?

My IPad is requesting that sign into iCloud. When I put in my password it tells me that it is incorrect and to try to reset. When do that it sill won't let me. This is enabling me from doing anything on my iPad. How do I get around this?My IPad is requesting that sign into iCloud. When I put in my password it tells me that it is incorrect and to try to reset. When do that it sill won't let me. This is enabling me from doing anything on my iPad. How do I get around this?

Where are you resetting the password? On your computer, I assume since you cannot use the iPad?
Have you tried a reset to see if the popup will disappear?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

How can i put back files that were accidentally put into trash

How can i put back files that were accidentally put into trash. I'm using Mountain Lion on my Mac Book Pro

command Z if it was the last thing you did.
Control (right) click on any item in the trash folder>> Put Back

Videophone example, XML result into a list?

In the video phone application, the reg.cgi appears to ouput a list of 'friends' in xml format
(from regcgi)
for f in friends:
    print "\t<friend>\n\t\t<user>%s</user>" % (xml.sax.saxutils.escape(f), )
    c = db.cursor()
    c.execute("select m_username, m_identity from registrations where m_username = ? and m_updatetime > datetime('now', '-1 hour')", (f, ))
    for result in c.fetchall():
        eachIdent = result[1]
        if not eachIdent:
            eachIdent = ""
        print "\t\t<identity>%s</identity>" % (xml.sax.saxutils.escape(eachIdent), )
        if f != result[0]:
            print "\t\t<registered>%s</registered>" % (xml.sax.saxutils.escape(result[0]), )
    print "\t</friend>"
and the flash app appears to get the results as follows
(from httpmanager)
else if (result.result.hasOwnProperty("friend"))
                    // party query response
                    remote = result.result.friend as Object;
                    if (remote.hasOwnProperty("user") && remote.hasOwnProperty("identity"))
                        var identityString:String = remote.identity
                        var userString:String = remote.user;
                        var r:IdManagerEvent = new IdManagerEvent("lookupSuccess", userString, identityString);
                        dispatchEvent(r);
and it places a call to one of the 'friends' as follows
(from the videophone app file)
else if (e.type == "lookupSuccess")
                    // party query response
                    var i:IdManagerEvent = e as IdManagerEvent;
                    placeCall(i.user, i.id);
My query is, how would I take the full list that was returned as XML, and for example, populate a list with that data?
How do you iterate through the list, extracting the required values and put them into a list?
Im new to flash, and trying to get my head around how to do these simple things...
Can anyone shed any light, as Im learning loads, but keep hitting struggling points like this as I dont have a clue how flash does these things, and dont know what to investigate... Once a pointer in the right direction is given, a small example like this is shown, I can take it from there, and investigate/learn more.
t

Hi ken_from_uk,
you can convert your xml to an array collection and you can easily iterate using for loop and access the values in the list ...You can see the code below how to convert xml to ArrayCollection...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="convertXMLtoArrayCollection()">
<mx:Script>
<![CDATA[
   import mx.collections.ArrayCollection;
   import mx.rpc.xml.SimpleXMLDecoder;
   private var arrayCollection:ArrayCollection = new ArrayCollection();
   private function convertXMLtoArrayCollection():void
    var xml:XML = new XML(xmlStates.toString());
    var xmlDoc:XMLDocument = new XMLDocument(xml);
    var decoder:SimpleXMLDecoder = new SimpleXMLDecoder(true);
    var resultObj:Object = decoder.decodeXML(xmlDoc);
    if(resultObj.states.state is ArrayCollection)
     arrayCollection = resultObj.states.state as ArrayCollection;
    else if(resultObj.states.state is Object)
     arrayCollection.addItem(resultObj.states.state);
]]>
</mx:Script>
<mx:XML xmlns="" id="xmlStates">
<states>
      <state>
          <name_state>State x:</name_state>
          <code_state>X</code_state>
          <cities>
              <city>
                  <name_city>City One</name_city>
                  <population_city>20000</population_city>
              </city>
              <city>
                  <name_city>City Two</name_city>
                  <population_city>10000</population_city>
              </city>
              <city>
                  <name_city>City Three</name_city>
                  <population_city>80000</population_city>
              </city>
          </cities>
      </state>
      <state>
          <name_state>State y:</name_state>
          <code_state>X</code_state>
          <cities>
              <city>
                  <name_city>City Four</name_city>
                  <population_city>50000</population_city>
              </city>
              <city>
                  <name_city>City Five</name_city>
                  <population_city>40000</population_city>
              </city>
              <city>
                  <name_city>City Six</name_city>
                  <population_city>70000</population_city>
              </city>
          </cities>
      </state>
</states>
</mx:XML>
</mx:Application>
Thanks,
Bhasker Chari

HT204406 I purchased an album from itunes, and put it in a playlist. icloud status lists all the songs as purchased, and when I click on "Update itunes Match", this playlist will not update. There is a cloud to the right of the playlist name.

I purchased an album from the itunes store, and put it in a playlist. icloud status listed all the songs as purchased, instead of the usual "Waiting". When I clicked on "Update itunes Match", everything updated except this playlist. There is a cloud to the right of the playlist name. This has never happened before.
Any ideas?

I deleted the songs from my desktop (iMac), then I used itunes match to reload the songs back on my desktop from my laptop. When they reappeared on my desktop, then I right-clicked on the songs and clicked on the option to add to icloud. This however did not work, and they just duplicated into icloud, but they were "greyed out" and unuseable. I hope I'm explaining myself clearly? In other words, the songs seem to be trying to go into the cloud, but they are greyed out in my library and cannot download. It is as if they are ghosts? My songs do play fine when I transfer them via itunes match, and everything appears normal. They just won't transfer via the cloud. As I said before, every other song in my library always work fine via the could, but only the songs off this one album that I bought from itunes in 07' will not work???

Text File into a List?

I have a text file of an English-French dictionary.
I want to enter an english phrase into a text box
- search through the list(dictionary)
- and output the French phrase in a separate text box.
I want to search through the dictionary(list) for an english
phrase e.g. "accost" and output the corresponding french phrase
"accoster" to a text box.
Here is the format that the dictionary is in
English first followed by french followed by word type
accordions accorde/ons[Noun]
accords accords[Noun]
accost accoster[Verb]
account compte[Noun]
Is it possible to add a text files contents into a list?
Imagine manually typing all the contents.
Thanks,
Jack

Please see the replies to this cross-post at
http://director-online.com/forums/read.php?2,27554

How do I change the paragraph format of paragraphs that comes before a list of bullets in one shot

I receive word documents to convert to indesign files based on a template. I have a set of find and replace queries that do most of the work.
The manual work I am doing is as follows:
Changing the paragraph style of all body copy that comes before before bullets
Changing the paragraph style of last bullets and last subbullets
What is the simplest way of changing the paragraph styles of every body copy before a list of bullets.
I am doing more and more of these on a daily basis and would REALLY appreciate some insight.
Not sure if this can only be done in a script.
Hope that made sense.
Thanks.

spktrm11 wrote: Thanks for the response. I already have established styles. I have a style for "last bullet" and one for "bullets before last". I am trying to do a find and replace so I don't have to individually change the paragraph style of every last bullet. Document: Paragraph Text. (I want to be able to find this specific paragraph, which would be any paragraph before a bullet and change its style.)
bullet text
bullet text
bullet text
bullet text (I want to be able to find this specific bullet (bullet text) and replace it with (last bullet))
Paragraph Text
I want to avoid having to go through the document to change the style of every last bullet that i find manually. I would like to find (based on it's position - any bullet that is followed by a paragraph)
Hope this makes more sense
Have you considered following lists with a "paragraph after list" style, like your paragraph before list style? This might be more appropriate for authors to apply while they create content. The idea is that all list items use a single style, so that rearranging items within the list doesn't require retagging the first or last list paragraph to adjust space or numbering when the first or last item is moved into the list.
If this is a common problem in your work, you might want to post a feature request for smarter paragraph styles that can detect whether they're first, last, or interior list items, and adjust their properties as appropriate to their position. You can post your request here: wish
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Put IP's that answer into a list?

Similar Messages

Maybe you are looking for