Putting something on top of CS3 fullscreen video

I am still looking for the code or procedure to put custom
buttons or banners on top of fullscreen video in Flash CS3... I
have seen this demonstrated on several examples online, but can
find no code anywhere...any ideas?
Simply putting the object on a higher layer does not work, so
I figure code must somehow enable it...

CodeManNew,
> I am still looking for the code or procedure to put
custom
> buttons or banners on top of fullscreen video in Flash
CS3...
> Simply putting the object on a higher layer does not
work,
> so I figure code must somehow enable it...
You nailed it. Make sure your FLVPlayback Component has an
instance
name (select it on the Stage and look at the Property
inspector). Next, use
that instance name to reference the
FLVPlayback.fullScreenTakeOver property
and set it to false.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Similar Messages

Put something on top of the stagewebview

Hi,
I'm using stagewebview > Flash Builder 4.6
I have a stagewebview and I load an url in it. I want to show sometimes a slide panel on top of the stagewebview. I tried it, but the panel is always behind the stagewebview. I know that stagewebview isn't a display object, but does anyone know if there is any way I can do it?
Thanks in advance

I used the first example from this post:
http://www.stimuli.com.br/trane/2007/nov/07/tweener-tips/
Tweener.addTween(this, {time:0.3, onComplete: myFunction});
I placed this at the end of my screen capture function and then carry out the rest of the process via a new function ("myFunction") in the example above. You may need to experiement with this arrangement, along with the specific delay time, for your own situation.
But I'm new to AIR dev myself, so there may be better ways. This does work for me, though. (again, not sure if this will definitley solve your "blinking" issue though)
Good luck!
JP

I'm using movie program how do get rid of background noise and put music over top of video

I'm using movie program how do get rid of background noise and put music over top of video

Niel,
Thanks for your suggestion about using RCDefaultApp. I am hesitating to do this because it seems like I'd be installing still another piece of software to fix the original mistake---downloading Reader.
About 20 years ago I maintained---with considerable handholding---UNIX systems of various sorts. Can you suggest how I might find the plist that seems to require changing?
BTW, Preview is called whenever I open some random .pdf file. The problem appears when I want to get a file from the web. If the site permits a "download" I can get the file, but if I want to "view and print" the file, the evil dark-grey Adobe screen appears with the whirling black ball. Then Safari quits. I'm wondering if the reference to Reader is in a "cookie" sent from the website, when I first was installing Reader. Is this possible?

Flash CS3 import Video playback appears half black

Hello everybody,
I hope you could help me.
This problem occurs when a file becomes. wmv to .swf, using Adobe Flash CS3 import video feature. (Windows 7 Professional x64)
At the end is a video (codec On2's VP6.2) which appears a black band at the top half. I reinstalled the entire CS3 suite, but the problem persists.
Could you give me some advices for this?
Thank you in advace.
Regards.

Microsoft broke WMV decoding in a recent Microsoft update.
See this for details:
http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.html
http://forums.adobe.com/thread/1251905

Mac OS X 10.6 fullscreen video menu bar

this is wired, the same thing happened in the 10.1 flash player beta and took quite some time for adobe to figure that out.
When i go in fullscreen video (yutube,vimeo) with Flash Player 11 Beta the Menu Bar just doesn´t disappear. it stays on top of the video rather than go away as it should.
seems to be a very hard thing to do on mac os letting the menu bar disappear.
best
Ole

This was fixed by Apple in Mac OSX 10.7 due to a 64-bit bug. I am not sure if they will be back porting this fix.

Search does not work. Put something in search, press search and nothing happens

"Search" in the middle of the page does not seem to work. I put something in there, press search and nothing happens. I have to go to the top right hand corner (Google) and put it in there and then it takes me to where i want to go. Once there if i want to use search it works once it has taken me to a web site. How can i fix this?

Hello Albert,
the web dynpro applications for internal and external candidated existed with eRec 6.0 SP 7 (or 9 depending if we count delivered or working ) so the were available before SES and are working with the old TREX setup as long as the SES business function is not activated.
As a general issue you could check IMG node "Assign Search Template Groups to Search Applications". The web dynpro applications use new CompIds (the ones with capital letters). Check if the Ids are existing (you might need to compare with client 000) and if the Search Mask Group Ids assigned are correct.
Furthermore check the application log (SLG1). If there is some configuration issue in the search masks a log entry should be written. If you need assistance with the log entry, just post it here and we will see if we can help.
Kind Regards
Roman

Since I started using Lion (10.7.2) I'm prompted to type my password if I want to add a folder or put something in the trash. Is there a way to stop this from happening?

Since I started using Lion (10.7.2) I'm prompted to type my password if I want to add a folder or put something in the trash. Is there a way to stop this from happening?

It sounds like the permissions on your Home folder are snarky.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
Restart Lion and hold down the Command and R keys.
You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
In the Terminal window, type resetpassword and hit Return.
The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

AIR bug with iOS fullscreen video! (easy repro)

Here's a bug with fullscreen AIR apps not dealing with iOS fullscreen video resize. Easy repro:
1. Create an mc with a background graphic aligned with the top and bottom of the stage. (This is so you can easily see the bug.)
2. Add a stageWebView and load an html page with embedded video. (or just load a video directly)
3. Play video and enable fullscreen mode.
4. Rotate device 90 degrees while in fullscreen mode and then hit "Done" button to return to stage (exit fullscreen).
5. BUG: Stage is now "pushed down" and off-screen. (even though the mc still traces x = 0)
Conclusion: the display bug occurs when the user exits the iOS native player fullscreen mode from a different orientation then they started with (common if the original aspect ratio was portrait)
Can someone else please confirm this? (The amount of stage "push" appears to corrolate with the height of the iOS status bar.)
Thanks.
PS. You don't necessarily need to load an html page. You can just have stageWebView load a video directly and experience the same result.
PPS. I also tried using the new UIWebView Native Extension and am seeing the same thing, so this is really looking like an AIR/Flash bug with the iOS native player.

A simpler summary for this issue:
If the device has been rotated since entering Fullscreen native player, a fullscreen app will be "pushed downwards" and off-screen slightly.
BUG: Adobe AIR app does not stay in fullscreen mode after such and event, ruining graphic UI for fullscreen apps.
Simple workaround: listen for on orientationChange and if stage.displayState == StageDisplayState.NORMAL, set to stage.displayState = StageDisplayState.FULLSCREEN.
However, iOS native player will lose traditional status bar appearance (and risk rejection by Apple??)
Complex workaround (as mentioned earlier) will keep the native player's status bar but result in the app's screen "flashing" upon resizing the stage.
Please help fix this bug by commenting in my bug report. Thanks again.
https://bugbase.adobe.com/index.cfm?event=bug&id=3486264

Can I put only the top image of a stack in a Mobile Album?

I have an album that contains stacks and I would like to put only the top images of these stacks in a Mobile Album. Is this possible?
I have tried to make a new album and only put the top images in this new album without sucess. Is it possible to have a stack of images in one album and only the top image in another ablum?
I hope someone knows about this
Hans Brodin

Hi Surendra,
My target is to find a convenient way to transfer my best photos only to my iPad
By using stacks for similar photo and putting my best shot on top I reduce the number of images displayed in the organizer. A typical stack contains of 8 shots.
Then I put my best stacks in an album. By using the Slide Show in PE I have a convenient way to display only my best shot and tha's OK for my computer were I have a lot of disc space.
But on my iPad the size of memory is limited and it also takes some time to transfer a huge number of images so now I want to find a convenient way of tranfering only the top image of each stack. If I could have a separate album containing only the top images from each stack the task would have been easy.
Now this is not possible so now I hope there is another solution than acually making a separate copy (a new file) of each top image and put these copies in a separate album. This will of course work but it will end up in having two identical images showing up in the organizer and so I do not really like this idea.
I hope I have managed to describe my intention and do you have an idea for a workaround or do I need to make separate copies?
Thanks a lot
Hans

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.

I have a problem with Firefox, as webmaster I made my websites under IE but now my websites look not OK in Firefox, pictures dont show, menus not working, etc..must I put something in my HTML code so people see my website correct?

''locking as a duplicate - https://support.mozilla.com/en-US/questions/783107''
My website is not working correctly, pictures, menus etc..
As webmaster I made my website, in IE everything works correctly but with Firefox not.
Must I put something in my HTML-code so everybody who use Firefox see my website correctly?
Thanks.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Css shadows/Fullscreen video problems

Hello,
At some point I've started to have problems with FF displaying css shadows and fullscreen videos.
1) Here's an example of how css shadows look like on a variety of sites when openned in FF: http://xmages.net/show.php/2871278_css-png.html . Chromium displays the same sites perfectly.
2) There's some kind of a problem with the switching to the fullscreen mode. For example at imdb.com when I click the fullscreen mode button - the video itself starts underneath the browser window and can be switched to with ALT+TAB. Again - Chromium works fine there.

Try to disable hardware acceleration.
* Edit > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"

CS3 Flash Video Encoder no sound

I have been using the Macromedia Flash FLV encoder for a very
long time, but now that I have upgraded to the CS3 Flash Video
Encoder the video gets encoded but the audio is always missing.
All my settings are the same as they always were and when I
encode an AVI to FLV the audio is missing. How do I fix
this?

I to am having the same problem with the flash encoder. Added
a wmv file and a mov file to the queue and I get the same results.
I do however see the first frame of the movies. Cannot set in and
out points because the first frame displays while scrubbing.
Model Name: MacBook Pro
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Memory: 4 GB
Adobe suite CS3 - all updated.

Why when i insert a table it won't let me put something next to the table?

when i insert a table it only lets me put something under the table intead of beside it.

In DWCC...
Click the table in Design View so the whole thing is highlighted
In the Properties window, click the CSS button
Click Edit Rule
In the CSS Designer, under Properties, click the Layout button
Scroll down to Float and choose left or right
Then do the same for any element you want to appear next to the table.
You can also edit the css manually by adding the following to the <style> tagset in the <head> of your page or by adding it to an external .css file...
table {float:right;}
You may want to give the table an id in your html and target that instead, to ensure all of your tables don't start floating. That would look like this in your css (change tableid to any unique id you want)...
#tableid {float:right;}
and in your html you would have this...
<table id="tableid">

Cant put image on top of another image

Hi,
I'm using keynote 09 with the 'Blueprint' theme. I'm attempting to edit the master slides by putting a company logo in the corner of each slide. This works fine on slides without images, but on slides with images, keynote will not let me put my logo over the image placeholder. The placeholder image always blocks my logo, even when I choose 'Send backward' on the place holder.
Is there a way around this?
thanks

Sorry, I was typing fast.
The problem is that you cannot put images above media placeholders on master slides. One suggestion was to make my image (my logo comprised mostly of white text) a media placeholder as well, therefore I could edit the master slide and layer my new media placeholder (logo) above the default-already-existing placeholder (some architectural image in the blueprint theme).
This works but has an additional problem.
Since my logo is white text, I wanted for it to stand out from the picture beneath it. As I sometimes do, I thought I should place my white-text-logo on top of a small black rounded rectangle with transparency (like a cartouche).
I like to do that because it makes my logo legible, while still showing the picture through the transparency. INdeed, this is easy to do if you are only dealing with pictures and shapes (and not the magical placeholder versions of them)
You can make the shape a text placeholder, and you can make the image (logo) a media placeholder, but you can't group the two together as a unit. And if you group them first, then you cannot make your group (shape+image-logo) a placeholder at all, so you then cannot layer it on top of the default image place holders.
I was saying that I'd have to open my logo in photoshop and put it on top of a 'cartouche' and then import that modified image, and THEN make it a media placeholder.
But obviously it would be easier if keynote just let us properly layer elements as you would expect it to work.
I mean, setting images aside, why can't I create a shape and put it in front of a media placeholder without making the shape a text placeholder?
Of course I can edit my logo and add dropshadow or glow to make it stand out, but even then, I would need to make it a placeholder before keynote would let me layer on top of another placeholder. And if I'm going through the trouble of using photoshop to add shadows or glows, I might as well just put the image on top of a cartouche as originally desired.

Putting something on top of CS3 fullscreen video

Similar Messages

Maybe you are looking for