Putting Three Cells into one Table Cell but with Three rows of data?

How do I do this.
I see no way to increment the indexPath row.
I have data grouped by category and I want to show three items per line.
Is there an example or such on how to increment the indexpath
thanks

One way to think about this problem is by filtering. You can create 'Booked Gig Tracking' and 'Try Again 2009' tables that are merely copies of the main table (with columns omitted as desired). These two tables would be populated with simple formulas like =MainTable :: Name in the Name column and =MainTable :: Address in the Address column. Make sure to copy the appropriate check column as well. Then each of these two tables can be filter to show only the items that are checked.
This is a pretty sketchy description of the idea. If you need something more detailed, ask.

Similar Messages

Insert into one table, update another with one form

Does anyone know how to do this?
I'm writing a small system where I need to have a master project record in one table, and small little project events in a sub notes table. I want to be able to insert a record with notes into the sub table and update the status in the master table -- all from one form.
Any thoughts would be very, very appreciated :) -LR

Hi Lee,
in case your main Insert transaction provides a value which can be used to identify the master table´s primary key, I think you should set up a Custom Trigger to update a specific record in the master table.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Combine Multiple Worksheets into one table

Hello Everyone!
I have 2 Excel worksheets within the same workbook. Both have identical tables with almost the same fields except for 2 or 3 different columns in one of the sheets. Currently I have a macro assigned to a button on one of the sheets and I have to click on
it to combine the 2 sheets. I also have a Pivot Table on one of the sheets which pulls data from the table on that sheet and displays it on the existing sheet.
I wish to :
1. Combine (merge) these two sheets into one table on a new worksheet when Excel file is opened rather than clicking on the button.
2. Once the Excel file is opened, i would like to have the Pivot Table to pull data off the combined sheet and display it next to the combined table. Essentially I would like the Pivot Table to be refreshed with the new data from the Combined table rather
than from one table.
Is this possible ?
I use the following code to combine the two sheets, but I don't know how to proceed further. Can someone please help me with the rest ?? Thanks in advance.
Here's the code:
Option Explicit
Sub Combine()
Dim J As Integer
On Error Resume Next
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined Results"
Sheets(2).Activate
Range("A1").EntireRow.Select
Selection.Copy Destination:=Sheets(1).Range("A1")
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Offset(1, 0).Resize(Selection.Rows.Count - 1).Select
Selection.Copy Destination:=Sheets(1).Range("A65536").End(xlUp)(2)
Next
End Sub
The problem with being punctual is, there's nobody there to appreciate it !!!

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, the issue is more related to Excel DEV. I'll move your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Fetch data from two tables and insert into one table

I have similar to the following data in two tables (@Plant, @PlantDirector) and need to consolidate into one table (@PlantNew) as follows.
DECLARE @Plant TABLE (PlantID INT, PlantName VARCHAR(100))
INSERT INTO @Plant (PlantID, PlantName) VALUES (1, 'Name One'),(2, 'Name Two'),(3, 'Name Three'),(4, 'Name Four'),(5, 'Name Five'),(6, 'Name Six')
Director data for the Plants exist in the following table. Assistant value 1 means Assistant Director and 0 means Director.
Data exists only for subset of plants and a Plant may have one or both roles.
DECLARE @PlantDirector TABLE (PlantID INT, PlantDirectorID INT, Assistant bit)
INSERT INTO @PlantDirector (PlantID, PlantDirectorID, Assistant) VALUES (2, 111, 1),(2, 222, 0),(4, 333, 0),(6,444,1)
The above data needs to be inserted into one table (@PlantNew) as follows:
PlantID in @Plant table is IDENTITY value and needs to be inserted as-is into this table.
PlantDirExists will get a value of 1 if at least one record exists in @PlantDirector table for a PlantID. PlantAssistantDirID and PlantDirID should be set to the corresponding PlantDirID or NULL appropriately depending on the data.
DECLARE @PlantNew TABLE (PlantID INT, PlantName VARCHAR(100), PlantDirExists bit, PlantAssistantDirID INT, PlantDirID INT)
INSERT INTO @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
VALUES (1, 'Name One', 0, NULL, NULL),(2, 'Name Two', 1, 111, 222),(3, 'Name Three', 0, NULL, NULL),(4, 'Name Four', 1, NULL, 333),(5, 'Name Five', 0, NULL, NULL),(6, 'Name Six',1, 444, NULL)
How do I achieve the above using SQL ? Thanks.

like this
INSERT @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
@PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
You're missing a FROM
insert into @PlantNew
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
from @PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID

Multiple BI Query Results into one Table

Hi All
Can I embed Multiple queries into one table using VC?
I have data in different BI sources(Info Areas) like sales and distribution,Shipments etc. Can I write any universal query to retrive data from multiple sources?(If any???)

Hi Jan Pasha,
My model contains two BW queries which uses UNION and sent result to one table.
I tried using UNION also but when I use it I am able to see no records to select in result table.
I donot have any coloums in common. Is it pre-requisite for using UNION?

Using DATA_CELL and multiple queries into one table

Hi WAD experts,
I have been trying to work out how to combine multiple hidden query result sets in their own tables in the template, into one table displayed as if the data originated from one query.
I have been looking at using the DATA_CELL method of "modify table" class.
Has anyone had to do this before - and if so do you have any clues as to how best to do this ?
Thanks
Chris

Here is what I want:
Say I have a query that tells me about how many items were sold at a hardware store for each week. Then the output would look something like this:
Week,Item,Num_Sold
13,Hammer,15
13,Nail,594
13,Screw,398
14,Hammer,16
14,Nail,382
14,Screw,331
But I want my output to look like this:
<space>,13,14 <-- these would be the week numbers
Hammer,15,16
Nail,594,382
Screw,398,331
I asked this same question in a SQL-only forum and one person responded that they did not know how to do that. But I figure that this is done often enough that there must be some Open Source program that can transform the output data into a table. As you can see, it's not a pure transform. It's more like I take one column, make that the x-axis, another column, make that the y-axis, and "plot" the data based on the two columns. It's kinda like taking 1D data and making it 2D. There's no existing open source program which does this? I figure that I could just give the program my SQL queries, specify some rule such as "Make the first column of the resultset the row, make the second column the column and create a table with the 3rd row, using the first two rows to map the 3rd row into the table". Note that I think this only works with 3 columns.
Anyway, if there is no simple program that already does this, I can make a program to do what I just described. I just asked the question here because I figure that there are a lot of people knowledgeable about SQL and Java on this forum and that someone would know of a tool which already does what I want if one exists.

I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format.

I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format. I took the same file and transferred it in my MacBook Air and was able to put it in the iBooks application no problem, the MacBook Air runs OS X v 10.9.5
Please advise as to Why it would work on an older OS X version as oppose to the newer OS X Yosemite
Thanks
JP

Thanks Lyra,
I may be doing something wrong because looking at the "Purchased" in iBooks I only see all the books that I actually purchased, none of the iBooks that I created in iBooks Author shows up. I can re-download all the iBooks I've purchased and some in iCouds, but the ones I've created in iBooks Author are no where to be found.
Any help is much appreciated,
Best Regards,
JP

Trying to put a file into a table

hello i am trying to put a file into a table but a don't know how to do it if somebody knows how to do it please send me an example.
thanks a lot

Hi
The easier way is saved the excel file in CSV format and use the fm GUI_UPLOAD to read that file:
DATA: TAB_FILE(1000) OCCURS 0.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME = 'C:\MY_FILE.CSV'
TABLES
    DATA_TAB = TAB_FILE.
In TAB_FILE you'll have your file.
If you want to create a dialog to search the file:
parameters: p_file1 like rlgrap-filename.
at selection-screen on value-request for p_file1.
data: filetable type filetable,
      rc        type i.
data wa_file like file_table.
refresh filetable.
call method cl_gui_frontend_services=>file_open_dialog
   EXPORTING
   WINDOW_TITLE            =
   DEFAULT_EXTENSION       =
   DEFAULT_FILENAME        =
   FILE_FILTER             =
   INITIAL_DIRECTORY       =
   MULTISELECTION          =
   WITH_ENCODING           =
    changing
      file_table              = filetable
      rc                      = rc
   USER_ACTION             =
   FILE_ENCODING           =
exceptions
    file_open_dialog_failed = 1
    cntl_error              = 2
    error_no_gui            = 3
    not_supported_by_gui    = 4
    others                  = 5.
if sy-subrc = 0.
    if rc = 1.
      read table filetable into wa_file index 1.
      move wa_file-filename to p_file1.
    endif.
endif.
start-of-selection.
DATA: TAB_FILE(1000) OCCURS 0,
      file type string.
move p_file1 to file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME = file
TABLES
    DATA_TAB = TAB_FILE.
Max
Message was edited by: max bianchi

HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

Hi, did you try iTunes>File>Import?

Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents. When I drag the doc in a line would show up in the past, and if I went above th eline all was good. It doesn't have a line, and no matter what I try I am having no success.
Please help!

According to an Apple Support article, unless there are unforeseen issues
in file ownership or permissions, the combining of .PDFs should be simple.
•OS X: Combining PDF documents using Preview - Apple Support
There are a few variable and similar methods, some change with version
of OS X in use; some vintage OS X may vary a little in the process...
A variety of similar topics appear in search results, with terms:
" mac os x combine pdf into one " such as this page shows...
https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
If the system is older than Mavericks there may be other methods to try.
Suggestions are among linked results in the search. I see a few fair ones.
•Here's another that offers generally similar suggestions...* this info looks OK, extra links, do not:
http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
{ note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
If you have a problem after trying other methods, based on an OS X
your computer is running, post back with more exact information...
Good luck & happy computing!
edited

How do i put multiple albums into one huge album collection?

How do i put multiple albums into one huge album collection?
Some examples include: Linkin Park - Studio Collection, Michael Jackson - The Indisposable Collection

Hi skullkrunch3r,
Thanks for visiting Apple Support Communities.
If you "Get Info" on the tracks that are part of your collection, you can use the Compilation option in iTunes.
In iTunes 8 and later, you find the option to mark multiple items as "Part of a compilation" in the Options tab of the Multiple Item Information window.
See this article for more information on marking your albums as part of a compilation:
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Best Regards,
Jeremy

Hide a column in one table view but show it in another

I need to hide a column in one tables view but show it in another table view in the same report. Is this possible?
Any help on this is appreciated.
Edited by: VNC on Jan 11, 2010 9:26 AM

Hi VNC,
If you're crafty with javascript, you could probably write a script that would set the CSS property DISPLAY to NONE to hide the column in the table view you didn't want but leave it there in the view you did want.
-Joe

Loading data from two flat files into one table

Hi All,
I want to load few fields from one file and few fields from another file and load the data into one table in the database.
For Ex: I have two flat files file1.csv and file2.csv and file1.csv containes 25 columns and file2.csv containes 12 columns, i want to load 20 columns from file1.csv and 7 columns from file2.csv into the table
how to combine the columns from both the files and load them into one table at a time?
Any help is appriciated
Thanks
R.G

Use external tables.
If using Oracle9 or higher connect both your csv with database as separate external tables and load the requited fields in new/requited table.

Concatenate multiple tables into one table

Dear all,
I am doing migration between two database structures, that's why I need also to know if we want to concatenate the data in tables A,B and C into one table in the destination schema, what is the strategy to do this knowing that I have a lot of data and I need the fastest solution.
regards

Since the details of your requirements are unclear, will this approach not work ?
SQL> INSERT into target_table
SQL> (SELECT * from tableA UNION
SQL> SELECT * from tableB UNION
SQL> SELECT * from tableC);HTH
Srini

"In Adobe Standard, when combining files into one pdf, how do I keep the original date"?

I converted multiple emails into a pdf file. After opening the pdf file, I wanted to combine the files into one pdf however once combining the files, the date modified of the files changes to the current date. How do I preserve the original dates of the emails when combining the files?

Hi Softball ,
Thank You for posting on the forums. Apparently there is no such feature that would help you to achieve this.
Thanks,
Vikrantt Singh

I stupidly have one iCloud account but with two iphones using it. How can I delete iCloud from my phone without deleting the iCloud account from my husbands phone ? He needs the account on his but I don't want it on mine!!

I Stupidly have one iCloud account but with two phones using it. How can I delete iCloud from my phone without deleting the account from my husbands phone. He needs the account on his but I dont want it on mine!

But does this delete the whole account from the cloud, or just from my device. I must make sure my husband doesn't loose all his business contacts which are in the iCloud device. Thanks.

Putting Three Cells into one Table Cell but with Three rows of data?

Similar Messages

Maybe you are looking for