Puzzled about Customer Exits

Hi everyone,
I'm trying to get into the field of customer exit coding to enhance reporting capabilities. Now from what I've learned, the way to go is via one of the SAPLRRS0 exits and do the actual coding in includes like ZXRSRU01, which should be located in the customer namespace (since it's a 'Z', as I understand) and hence be modifiable. Still, if I try to edit the file, SAP asks for a developer key, but I thought this was the whole point about customer exits (and what sets them apart from user exits): Since you're not tampering with the original system, there would be no need for a developer key
I have also checked in SE03 if the customer namespace is modifiable (from what I can tell it is).

Hi Tilman Budde ,
Keys are required at 2 levels .
1. When you try to modify existing sap object ... This is called as object key.
2. When you try to modify existing sap object ..This is called as developer access key ..Unless your user id have this (developer key) ..even if you have object key you will not be able to modify abap workbench objects..
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

Similar Messages

Give me details about customer exit, sap exit using characterstics variabl

give me details about customer exit, sap exit using characterstics variable

Hi,
Customer Exit:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/content.htm
SAP Exit:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/frameset.htm
Characteristic Variables:
http://help.sap.com/saphelp_nw04/helpdata/en/5c/8db07d555411d189660000e829fbbd/frameset.htm
SAP and Customer Exit:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Some Imp Docs:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/650ee690-0201-0010-4bb7-83c3e2a74039
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
Assign points if these are helpful.
Rgs,
I.R.K

What's BADI about Customer Exit Global Variables in Reporting?

Dear Experts,
In BW side, about BW variable enhancement, i alway writing code in CMOD EXIT_SAPLRRS0_001/INCLUDE ZXRSRU01.
when have many peoples change this exit, will have appear some management issues, such as when have a person changing this exit, i can't chang it. and request management also have management.
Do you know which BADI can do it and replace CMOD's exit? Please advise.
Thank you very much.
Best Regards
Steve

Hi,
If you still feel that you are facing the issue, then you can create a new include for your project inside the
Include ZXRSRU01 and you can handle the datasources for your projects there.
You can also make use of this document Enhancing / Modifying Multiple Data Sources in Parallel which you can get by searching SDN
Prathish

How to Verify the Variable Input in Customer EXIT

Hi,
      I have a requirement to find out "Estimated Hours Total Calculation" with User input date range. I know little bit knowledge about Customer Exits please some one give me how to write code in CMOD. I have requirement how to get the Extimated Hours Total Calculation is follows ....
        Actual hours are the Hour Meter Reading used by the truck, it's calculated based on the "from and to" date parameters.
Collect the initial hours and adjusted hours from EM.
Get the PMN and Service Order data close to or within the Date Range.
1) If the Fleet Management Date (Start-up Date on EM) started before the input date Date Range (From-Date), calculate the average usage (in hours) based on the initial hours and the first PMN (or SO) falls within the Date Range to estimate the hour usage at start of Date Range.
2) If the Fleet Management Date started after the From-Date, use the Hour Meter (EM) as the Estimated Hours Begin.
3)If the last PMN (or SO) fell short of the Date Range (To-Date), obtain the Estimated Hours End by applying the average usage to fill the time-gap.
4)If the last PMN (or SO) fell after the Date Range (To-Date), get the Estimated Hours End by getting the next to last PMN performed inside the window parameter,
     calculate the average usage between the two PMN's (or SO's) then apply the weighted average to fill the time-gap.
Adjusted Hours, if not zero or null, needs to be added to the Ending Hours to achieve the real number.
For Example
User Input Date Range: Jan. 1, 2006 - Dec. 31, 2006
Initial Hour (Equipment Master): 10
Adjusted Hours (Equipment Master): 0
Fleet Management Date (Equipment Master): Dec. 1, 2005
1st PM Notification (Feb. 1, 2006): 410
Last PM Notification (Feb. 1, 2007): 2810
Second to last PMN (Dec. 1, 2006): 2410
     Equipment was put into service (12/1/05) before the Date Range, needs to find the Estimated Hours Begin.
     The first PM was performed (2/1/06) exactly two months from in-service date (12/1/05).
     Average monthly usuage from first PMN = (410 - 10) / 2 = 200
     Estimated Hours Begin = 200 + 10 = 210 (estimated Hour Meter Reading on Jan. 1, 2006)
     Average monthly usuage from the last 2 PMN = (2810 - 2410) / 2 months = 200
     Estimated Hours End = 2410 + 200 + 0 (adjusted hours) = 2610 (estimated Hour Meter Reading on Dec. 31, 2006)
     Estimated Hours Total = 2610 - 210 = 2400
           Please give me your valuable answers. Please let me know if you need any further information.
Thanks
Dave Sam.

hi,
well, your requirement seems clear but complex and needs more clarification:
- what kind of infoprovider do you use
- what is posted in your provider, I mean which characteristics and and key figures (name and descriptions)
- what is the user input
depending on that, the implementation may vary
Please clarifiy
Olivier.

Custom Exit for determining previous-year time range

Dear all:
I have a problem about custom exit:
We have created a new object for combining Fiscal Year/Month and Period. So the format will be shown as " yyyymmp"
now we have one requirement which is determining the same period but previous year based on user input. For Example, if user input start and end period as
"2006041" and "2006111". There are should be 2 custom exit which are able to convert the user input to be "2005041" and "2005111". We created 2 custom exit for telling the previous-year period.
Then based on this converted time range, we should be able to extract applicable data. But after testing, we cant get supposing result. The code is following:
We will be very grateful for any input. thank you all so much
Calculate (Start)previous year/month/period by current
*year/month/period
*user-entry calendar year/month/period
WHEN 'ZFACLV19'.
      LOOP AT i_t_var_range INTO loc_var_range
      WHERE vnam = 'ZFACYMP1'.
        CLEAR l_s_range.
        LOC_YEAR = LOC_VAR_RANGE-LOW(4).
        LOC_MONTH = LOC_VAR_RANGE-LOW+4(2).
          LOC_YEAR = LOC_YEAR - 1.
        L_S_RANGE-LOW(4) = LOC_YEAR.
        L_S_RANGE-LOW+4(2) = LOC_MONTH.
        L_S_RANGE-LOW6(1) = LOC_VAR_RANGE-LOW6(1).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
Calculate (End)previous year/month/period by current
*year/month/period
*user-entry calendar year/month/period
WHEN 'ZFACLV20'.
break ab_william.
      LOOP AT i_t_var_range INTO loc_var_range
      WHERE vnam = 'ZFACYMP2'.
        CLEAR l_s_range.
        LOC_YEAR = LOC_VAR_RANGE-LOW(4).
        LOC_MONTH = LOC_VAR_RANGE-LOW+4(2).
          LOC_YEAR = LOC_YEAR - 1.
        L_S_RANGE-LOW(4) = LOC_YEAR.
        L_S_RANGE-LOW+4(2) = LOC_MONTH.
        L_S_RANGE-LOW6(1) = LOC_VAR_RANGE-LOW6(1).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
SzuFen

Hi,
Try with following modifications:
ZYEAR1(4) = LOC_VAR_RANGE-LOW(4).
ZYEAR1(4) = ZYEAR1(4)- 1.
ZMONTH1(2) = LOC_VAR_RANGE-LOW+4(2).
CONCATENATE ZYEAR1(4) ZMONTH1(2) INTO LOC_VAR_RANGE-LOW(6).
With rgds,
Anil Kumar Sharma .P

Customer exit

can any one please tell me about customer exits and can give some sample code to look in?
Thanks
Ramesh

Refer to the links below:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/home&
In second link you can search for code programs on user exits.
Hope this helps.
Ashish
PS: Reward Points if helpful

Customer exits in Bex

Hello BW Experts,
Could any one give me some pointers / web sites / materials / oss notes for Customer exits in Bex.
Any help is highly appreciated.
Thanks,

Check Out service.sap.com/bw ... See under "SAP BW InfoIndex" there you find a section called "Exit".
Let me warn you about Custome Exits usage in BEx ... be carefull about performances!
Hope it helps
GFV

About Variable exits(Customer exits)

Hello gurus
Could u give me some documentation on variable exits. How and when it is required? Give me some examples mainly on customer exits so that i can practice it.
It will be very much thankfull to u all guys. u can send me a mail to me i.e [email protected]
regards
Ajay

Can you send me those documents to [email protected]
Thanks,
Nikki
Hello Gupta, I am not able to give you points. Can you direct me again.
Thanks for the docs

Customer exit variable - internal table in BEX

Hi,
i am running a report and using variables in it.
The report runs over a info cube. There are few challenges in it.
One of the variable is posting date, and when user enters posting date i need to negate it with current system date.
If the negated value is greater than 28 then i need to exclude documnet type 'YG' and display the query, else i need to include the dcumnet type 'YG' and document type ' '. The above logic can be well implemented via a customer exit variable(for posting date) using an internal table. We have internal tables like C_T_DATA which is used in data source enhancement, which help us to implement our own desired logic.
Do we have such kind of internal tables, based on which the report output (result set) is derived?
i know that we have l_t_range and e_t_range, but dont know their usage, some one can explain in detail about them?
Thanks in advance.

Hi Selva & Lakshmin,
The code given by Selva is almost correct . If my understanding is clear , you also wanted to include document type ' ' when the negated value is less than 28 .
Modification in Selvas Code :
Variable 'V_DOCTYP' must be of type Multiple Single Values.
DATA : V_DATE LIKE SY-DATUM.
DATA : V_DAYS TYPE I.
if i_step = 2.
when 'V_DOCTYP'.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZV_PDATE''.
IF SY-SUBRC = 0.
V_DATE = loc_var_range-low.
ENDIF.
V_DAYS = SY-DATUM - V_DATE.
IF V_DAYS > 28.
l_s_range-low = 'YG'
l_s_range-sign = 'E'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ELSE.
l_s_range-low = 'YG'
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
clear l_s_range.
l_s_range-low = ' '.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

Understanding complex query with selections(customer exit variables)

Hi experts,
I am trying to understand one query having a combination of selections and BEx variables in it.
In Characteristic Restrictions panel of Query Designer:
we have some CHARs restricted by means of authorisation variables
In Default Values panel:
some other CHARs without any filters
In free CHARS panel
some characteristics
In Rows panel:
some more chars that were placed in Default values panel
In Columns panel:
Formula YTD on selection YTD
Formula Monthly on selection Monthly
Selection on YTD characteristic(hidden)
Selection on Monthly characteristic(hidden)
Selection XX(in definition,I saw selection on YTD Keyfigure and a characteristic variable VAR1(i-step=1) filled with customer exit..this variable picks up right version of Master Data...our system has many versions of master data,one for each year)
Selection YY(in definition,I saw selection on Monthly key figure and the same characteristic variable VAR1 we used in Selection XX)
When I execute this..I see one variable popup which asks for values for year and version of master data...I enter master data version for that year and the year....I see the result...
Now I tried to experiment to learn...I deleted Selection XX and Selection YY and tried to execute....a variable popup asking for year...I enter year and tried to execute..it throws message---'Value for variable VAR2 cannot be determined'......
I couldnot understand this error because VAR2 is a customer exit characteristic variable defined in CMOD...ITS NEVER USED IN THIS QUERY...but defined in CMOD to pick up correct version of Master data..its defined in such a way that it picks value depending upon VAR1 varaible....both variables function is same...its just that VAR1 works on i_step=1 and VAR2 works on i_step=2 plus dependent on VAR1....
Can anyone understand why I am seeing error about VAR2 when its never used in Query....??
Thanks for your inputs....

Hi Vikram,
I am unable to find VAR2 anywhere in query designer....Can it be like that its hidden?
Thanks and Rgds,
SChand

Customer exit variable with exclusion

Hello all, anyone know why a customer exit variable cannot exclude values ?
I've tried with multiple, single and interval without success (it give me a generic error in the customer exit for my variable).
Only the "selection option" mode seems to be enabled to exclude values (also in debug mode with rsrt transaction).
Unfortunately, I cannot use selection option (because this exclusion is an integration of pre-existence selection on a complex structure).
We have SAP BW 3.1C, with SP16. I've looked for sap notes but nothing about this problem (may be a limit).

Now I post my code. The variable is a "Multiple Single Values", optional, not "Ready for Input".
This is my code.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
If I_STEP = 2.
 CASE I_VNAM.
 WHEN 'ZXXXXX'.
 clear l_s_range.
 l_s_range-sign = 'E'.
 l_s_range-opt = 'EQ'.
 l_s_range-low = 'xxxxxxx'.
 append l_s_range to e_t_range.
 ENDCASE.
ENDIF.
The query raise an error (generic error on customer exit).
I've debugged the code. Error has raised from plausibility_check on RRS_VAR_VALUES_EXIT_AFTER. The following is the code that raise the error.
 CASE i_vparsel.
 WHEN rro04_c_vparsel-param
 OR rro04_c_vparsel-multiple
 OR rro04_c_vparsel-table.
 IF <l_s_range>-sign <> rs_c_range_sign-including
 OR <l_s_range>-opt <> rs_c_range_opt-equal.
 PERFORM raise USING rs_c_false g_c_ue_invalid_range
 i_vnam space space space.
 ENDIF.
From this code, it seems that with multiple selection we only have sign including and option equal.
What do you think about ?

Creation of Customer Exits in release 6.00 is having some problems

I am facing problems while creating Customer Exits in release 6.0. Since due to the introdution of enhancement spots I am not clear as what is significance of enhancement spots for the BADI. How will it affect it?
Also, I am finding differences while creating the BADI in 6.00 release and that of lower releases. In 6.0 release it is not creating the default implementation which the system creates itself for lower releases when the BADI is activated. I want to know if this functionality is removed in the higher release or due to some other reason?
Kindly let me know about these nuances as it is creating much problem in 6.0 release.

I'm just wondering if release 6.00 (I mean SAP ERP) is already available non-rampup customers?
Peter

Customer Exit not called upon in the Query...

Dear Guys,
I am working on the "Slow Moving Item(MC46)" report in BW.We need "No.of Days Not consumed" in the Input selection screen in the BW Query.We tried creating a Formula variable upon "Calday" with Data type "Numeric" and then a Customer Exit is called to the Subtract the "No. of days not consumed" from "Today's date(System Date)" and gives the result as "Earlier date" .
(Eg: Today's Date : 04-04-08
       No. of Days Consumed : 30
       ZSlow_Mov_Date          : 03-03-08).
But for some reason the Customer exit is not called upon when we execute the Query (RSRT-->Execute + Debug option)..Can someone take time to throw some light on this,plz?
Manythanks
Arun

Hello Arun,
In the User Exit Code, please check at what I_STEP value the variable exit is called.
See this link for more info about I_STEP
[Dependencies for Variables of Type Customer Exit |http://help.sap.com/saphelp_nw04/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm]
Thanks
[Chandran|http://chandranonline.blogspot.com/]

Number of working days in customer exit?

Hi, this is actually an extension to the following thread.
How to calculate number of working days
I have very similar requirement. Determine the number of working days (excluding weekends and holidays) from 2 given dates. But the difference here is that, one of the date in the calculation is the current date.
1: Creation Date - this is present as infoobject in the ODS.
2: Current Date - this is 'today''s date.
And, No. of Working days(Zworkdays) = Current Date - Creation Date.
So, as mentioned in the thread 305257 speaks about including the logic in the update rules, I can use system variable sy-datum to get the current date in update routine. But if the load is not scheduled for every day (say,once in 2 days), then when i report this infoobject Zworkdays on Day2, then it will hold Day1 calc rite?
PLease correct me if I am wrong.
Could you please help me with other approachs I can follow. One I can think is Customer Exit in Bex for the same.... but I am not sure how to do the same (i am new to Bex and Customer exit). Could any one of you please guide me how to achieve the same. I Have 0CalDate in the ODS also.
Any other ideas/inputs is greatly appreciated.
Thanks in advance
Ramya

Hi,
search for virtual key figures.
Rgds.
Juergen
P.S. Thanks for assigning points
Message was edited by:
Jürgen Hemelt

Customer exits for PB20

Hi all,
My problem is quite strange, because i know how to do something, but it does not work....obviously :-).
Ok, I am using the customer exist pbas0002 for PB20...I want to change the menu from the standard transaction PB20...
the code in the customer exist is this one:
import progr from memory id 'PRGPB20'.
 if progr = 'ZHRGC'.
 loop at screen.
 if screen-name = 'RPAPP-APLNO'.
 screen-input = 0.
 modify screen.
 endif.
 endloop.
 set pf-status 'ADIS' excluding 'PORT' of program 'SAPMP50A'.
 endif.
Quite easy so far....
Somewhere in another program I am calling the transaction PB20 and before calling I am exporting the value 'ZHRGC' into the memory id 'PRGPB20', but the import command inside the customer exit does not get any value....
Does somebody knows what it could be? Is the abap memory cleaned before the import command?
I tried also, instead of using the export/import command the syst-cprog value, but the value does not correspond to the program where I am calling the transaction.
Here is the part where I call the transacton:
export b to memory id 'PRGPB20'.
set parameter id 'APL' field pernr.
call transaction 'PB20'.

I ran across this a while back, I banged my head against the wall for days, because I was stuborn about my variable names, I finally changed them to match and the problem was fixed. From then on, I always make them the same, ALWAYS.
I found this in the help.......
The structure of the fields, structures, and internal tables that youwant to import must correspond to the objects exported to the dataset.Furthermore, the objects must be imported with the same nameswith which they were exported.
Regards,
Rich Heilman

Puzzled about Customer Exits

Similar Messages

Maybe you are looking for