Customer exit variable with exclusion

Hello all, anyone know why a customer exit variable cannot exclude values ?
I've tried with multiple, single and interval without success (it give me a generic error in the customer exit for my variable).
Only the "selection option" mode seems to be enabled to exclude values (also in debug mode with rsrt transaction).
Unfortunately, I cannot use selection option (because this exclusion is an integration of pre-existence selection on a complex structure).
We have SAP BW 3.1C, with SP16. I've looked for sap notes but nothing about this problem (may be a limit).

Now I post my code. The variable is a "Multiple Single Values", optional, not "Ready for Input".
This is my code.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
If I_STEP = 2.
 CASE I_VNAM.
 WHEN 'ZXXXXX'.
 clear l_s_range.
 l_s_range-sign = 'E'.
 l_s_range-opt = 'EQ'.
 l_s_range-low = 'xxxxxxx'.
 append l_s_range to e_t_range.
 ENDCASE.
ENDIF.
The query raise an error (generic error on customer exit).
I've debugged the code. Error has raised from plausibility_check on RRS_VAR_VALUES_EXIT_AFTER. The following is the code that raise the error.
 CASE i_vparsel.
 WHEN rro04_c_vparsel-param
 OR rro04_c_vparsel-multiple
 OR rro04_c_vparsel-table.
 IF <l_s_range>-sign <> rs_c_range_sign-including
 OR <l_s_range>-opt <> rs_c_range_opt-equal.
 PERFORM raise USING rs_c_false g_c_ue_invalid_range
 i_vnam space space space.
 ENDIF.
From this code, it seems that with multiple selection we only have sign including and option equal.
What do you think about ?

Similar Messages

Displaying Customer Exit Variable with derived value from another ODS

Hi All,
Sorry if this question has been answered before. I searched the forums and could not find anything specific to my problem.
I am new to BEx Query. Customer is requesting a variable(s) be created which will be displayed as a column along with other CKF and RKF. This query is a payroll query for US/Canada. This new variable will be based on the user input date for the query. We are to take this date and go look up the actual pay date for the pay period to which the user input date belongs. The pay date is stored in another ODS.
So far, as far as the changes to the Customer Exit ZXRSRU01 are concerned, I would perform the logic when I_STEP = 2. Do a basic selection off the second ODS, derive the pay date, and store in range table E_T_Range.
The data displayed off the user input date is displayed in rows. This is done six times, going back seven days for each row (first row is data for period user entered date to user entered date - 7 days; second row is data for period user entered date - 7 days to user entered date - 14 days; etc ...). For this to happen correctly, I am assuming the variable(s) are to to have characteristic types 'Not ready for input', 'Mandatory', 'Customer Exit', and 'Single Value'.
My question is ... How do I display the six variables in columns (how are they to be defined in the query) and the characteristics I list above, are they correct? Does this need to be a replacement path variable?
Thanks.
Edited by: Amir Hasan on Jun 11, 2009 6:24 PM
Edited by: Amir Hasan on Jun 11, 2009 6:25 PM

Hi Amir,
What i can understand from u r requirement is you want to few columns that will show something like below,
User entered date = x
Period of X to Period of (X-7) Period of X to Period of (X-14).....
This can be done by CMOD for variable only.
Logic steps :
1) Take the user input.
2) Find out the period by using T009B table and store in temp variable.
3) Do day -7 and find out period for the same
4) Assing period of X to ls_range-high range and X-7 to ls_range-low.
Let me know if you have any doubt
Regards,
Viren

Change customer exit variable in selections over Dropdownbox

Hello Experts,
we are on NW2004s, SP12.
I have a customer exit variable (0CALYEAR) in two columns. In the first column the customer exit variable and in the second column the customer exit variable with an offset -1.
Now I want to change the year in a dropdownbox. Under <=BW3.5 that was not possible, only over a how to paper.
I can fill the dropdownbox in the web template but when I change the year, it jumps back to the year selected by the customer exit. How can I change the variable in the new web application designer (2004s) during the navigation? Has any one experience with such a problem?

Hallo Frank,
how can I change the variable values in the WAD?
The parameters of the variable: mandatory, customer exit, reference characteristic: 0calyear, single value, not ready for input.
My coding:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: i_s_var_range TYPE rrs0_s_var_range.
DATA: i_calyear(4) TYPE c,
 i_duedate(4) TYPE c.
IF i_step = 1. " Variable nach Selektionsbild bearbeiten
 READ TABLE i_t_var_range
 WITH KEY vnam = 'CALYEAR_X01'
 INTO i_s_var_range.
 i_calyear = i_s_var_range-low.
 i_duedate = '0210'.
 IF sy-datum+4(4) GE i_duedate.
 i_calyear = sy-datum(4).
 ELSE.
 i_calyear = sy-datum(4) - 1.
 ENDIF.
Rückgabetabelle füllen
 CLEAR l_s_range. " Range-Tabelle füllen
 l_s_range-low = i_calyear.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 APPEND l_s_range TO e_t_range.
ENDIF.
Thank you for your fast reply!
Regards
Jens

Restricting Charecterstic using customer Exit variable

Hi Experts,
Please adivise how can I restrict values of a charectersitc Infoobject using a customer exit variable.
I have a InfoProvider which has a authorisation values from which I have to retrieve the authorisation values.
Regards,
Koka.

Thanks for the reply Bhawani, I have a function module to fill the Customer exit variable with the values retrieved from DSO.
Can you please explain me the second step mentioned or can I direclty call my FM in the Include ZXRSRU01..
WHEN 'XXXX '. ( customer Exit varaiable)
      CALL FUNCTION 'ZBI_LOAD_AUTH'
        EXPORTING
          I_AUTHVALTYPE = 'auth value'
        TABLES
          E_T_RANGE     = E_T_RANGE.
Regards,
Koka.

Problem with customer exit variable in BeX Query

Hi All,
We have created a customer exit variable in a query and populated with few patterns in customer exit.
My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not working as expected.
It is bringing the values where the address line is exactly same as the pattern and not bringing the records where the pattern is part of the address line.
For example: Pattern passed in customer exit = 'HOSPITAL'
The record where address line = 'HOSPITAL' is shown in the rpeort, where the record with address line = 'HOSPITAL ROAD' is not shown in the report.
I would appreciate your help on this.
Regards,
Rakesh

Hi Diogo,
Below is the code I am using in the customer exit.
SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
      IF sy-subrc = 0.
        LOOP AT gt_pbuild INTO gs_pbuild.
          CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
          ls_range-low = lv_pattern.
          ls_range-sign = lc_sign_i.
          ls_range-opt = 'CP'.
          APPEND ls_range TO e_t_range.
          CLEAR: ls_range,
                 lv_pattern.
        ENDLOOP.
      ENDIF.
     ENDIF.
I have tried using '%' instead of '*' aswell but the result is same.
Thanks,
Rakesh

Problem with customer exit variable that is input ready as well

Hello all,
I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid.
The problem is that in the exit program ZXRSRU01 this varibale does not go into the program code I have prepared for this variable. I have added entry points for all three i_step values 1,2,3, but the code will never be touched and in debugging I can see that it simply pypasses the code for this variable.
I have tried to enter a value or to leave it blank, no difference.
When I run another test by just using a customer exit variable w/o input ready capability, then I have no issue, the exit does exactly what I have coded.
Does this mean, that a customer exit variable along with input readiness dows not work ?????
You may ask why I need this variable. Well, my intention is to use the input value of this variable A to derive other values for a complete different variable B. Afterwards I want to erase the input given into variable A to have it blank.
Any comments are appreciated
Thanks

Hi Heiko,
I assume A & B variables are defined on different Characteristics. If you wish to derive B based on A, you can create the Query Characteristic Restriction on B & have a dummy RKF restricted on A whose processing is by Manual Input; where processing of B is by Customer Exit. In istep 2 you can check for B, read A & derive B. There would not be a need to blank out A since the Query would not be restricted on A - you can hide the dummy RKF from showing in the output. Just a thought.
--Priya

Problem with Bex Customer Exit Variable

Hi Friends,
I have a customer exit variable which is getting filled based on the User Input. I have written the code inside the If condition checking i_step = 2. The code is working as required.
But the problem is when I try refreshing the query or change the user variable selection, the Customer exit variable is not changing. I tried to debug the code and realized that the values for the exit variable based on the previous selection is not cleared and the i_step = 2 is not being executed for the variable.
While I close and reopen the query, the code is working fine.
Does anyone know why this is happening? Please suggest..
Thanks in advance..
Regards,
Priya

Hi Binu,
Here is the code sample. I am trying to populate the month based on the input Week number '0I_WEKIN'
. For eg. If I give 37.2011, the month value should be 08.2011. If I give 39.2011, month should be 09.2011.
WHEN 'ZC_MONTH'.
    IF i_step = 2.     "after the popup
        READ TABLE i_t_var_range INTO lw_var_range WITH KEY vnam =
    '0I_WEKIN'.
       IF lw_var_range-high IS NOT INITIAL.
          l_week = lw_var_range-high.
          l_week = l_week - 3.
          CALL FUNCTION 'WEEK_GET_FIRST_DAY'
            EXPORTING
              week = l_week
            IMPORTING
              date = l_date.
          lw_range-low = l_date+0(6).
        ENDIF.
        lw_range-sign = 'I'.
        lw_range-opt = 'BT'.
        APPEND lw_range TO e_t_range.
    ENDIF.
Regards,
Priya

Text Variable replace with Customer Exit Variable

Dear Experts,
I created a text variable based on replacementh path (instead of customer exit). The reference characteristic is same that as my customer exit Variable and replace it by Key.
I want to replace it with already Existing Customer Exit Variable but it is not displaying in the List Box even though existing variable option is mandatory.
Can any one Suggest me the answer for this.
Regards
Supraja.K

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Authorization (rsecadmin) with customer exit variable

Hello,
I need to maintain authorization on 0CALMONTH with a customer exit variable.
0CALMONTH is "authorization relevant"
I created a variable of type "customer exit" : ZVAR001 (this variable is OK, I checked its value in a query)
I created a new authorization object with 0CALMONTH = $ZVAR001.
When I run my query I have a message due to authorization error.
If I change my authorization object by replacing my variable ($ZVAR001) by a constant value I have no authorization problem.
I don't understand why...
Error logs don't help me to solve my problem : I have the following message "Message EYE007: You do not have sufficient authorization" and system just says I have "0CALMONTH I EQ $ZVAR001 " but doesn't precise values under variable ZVAR001
Thanks for your help

Indeed problem was in costumer exit because I used condition with "I_STEP". Since I have delete my condition I have no authorization problem with my variable....

Authorization with customer exit variable (CP, BT, EQ)

Hi SDN-Experts,
I have a question concerning the new authorization concept.
I created an authorization for 0COSTCENTER which also contains the 3 special characters 0TCAACTVT, 0TCAIPROV and 0TCAVALID. I inserted a customer exit variable for 0COSTCENTER. The exit reads datasets from a db table which contains authorizations for the actual user. The authorizations have different formats, e.g. "1000", "1000;1200", "25*" etc.
The internal table e_t_range is filled as followed in the exit:
i   eq   1000
i   bt   1000   1200
i   cp   25*
This does not work. It works if I only use "eq" OR "cp". But not both at the same time.
How can I achieve to use the different authorizations in the db table for the bi authorization?
Thanks in advance...
Joerg

Hi Olivier.
Yes, the variable is defined as selection option and I did also try to use "EQ" instead of "CP".
I tested again with another variable which is "ready for input" and is not used in an authorization. The Variable is filled in the customer exit. This is the code:
WHEN 'ZJGR_COSTCTR_TEST'.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-low = '0000001000'.
l_s_range-high = '0000001200'.
APPEND l_s_range TO e_t_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'CP'.
l_s_range-low = '0000002*'.
APPEND l_s_range TO e_t_range.
The result in the variable screen in BEx Analyzer is the following:
1000 - 1200;0000002*;
And it still does not work. It seems that you could not mix EQ, BT and CP. But this is exactly what I have to do with the authorization variable...
Do you have any other tipps that I might try out?
Thanks,
Joerg

RSCRM: Query date with customer exit variable

Hi All,
Is there any way to run the RSCRM transaction with a query with a customer exit variable for a date characteristic?
The issue is that the query ran ok but the variable is not being updated when the RSCRM query is running with a background job or a process chain.
Thanks in advance
EV

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

Customer Exit with offset as input to other Customer Exit variable?

Hi Experts
I have a query which uses a Customer Exit variable "A" with an offset. My problem is then that I would like to use the outcome of "A"+offset as input for another Customer Exit variable "B" in the same query.
Is this possible somehow?
Summing up by example:
Lets say that A return 001 and the offset is 3, then we got the value 4.
Can I somehow get this value (4) and use it in another Customer Exit variable in the same query?
Kind regards,
Torben

Sure
I have 12 rows in a query. One for each month.
Each row is restricted on cust exit A and cust exit B.
A has an offset - the offset is the number of the month, which means 1 for January, 2 for february and so on. Cust exit A returns 001. So the value for Januar is 002, February is 003 and so on.
In cust exit B I need to get the result of cust exit A+offset. 002 for January, 003 for February and so on.
So, how do I get the A+offset for each row?
Kind regards,
Torben

Error with a customer exit variable

I have a customer exit variable in a characteristic (0fiscyear). Also I have a manual input variable on the characteristic 0fiscper. The customer exit collects the four digits of the year that the user introduces a screen for the characteristic 0fiscper. Collect the value correctly and in the development system does not give error, but in the production system said that "the value 2008 (for example) is not valid for 0fiscyear characteristic". The two systems are at the same level of patches and queries are identical. Any idea why this error??
Thanks and regards
Ricardo

No value at all behind 0fiscyear ?

Problem with customer exit variable

HI i have created a customer exit variable to rread a table based in user input and pass it to my variable , every thing works fine but i get a waring message in my WAD saying
RANGE-LOW for customer exit variable ZVSO_PRM corrected to # BRAIN 746
Does any one have any idea why is it comming
my code is as follows
WHEN 'ZVSO_PRM'.
IF I_STEP = 2.
DATA: BEGIN OF ZPROD_MODEL OCCURS 0,
I_PROD LIKE ZCURR_PM_T-/BIC/ZPRODMOD,
END OF ZPROD_MODEL.
DATA: BEGIN OF ZREGIO_TABLE OCCURS 0,
REGION LIKE ZCURR_PM_T-/BIC/ZREGION,
END OF ZREGIO_TABLE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZREG02'.
CLEAR L_S_RANGE.
ZREGIO_TABLE = LOC_VAR_RANGE-LOW.
APPEND ZREGIO_TABLE.
ENDLOOP.
LOOP AT ZREGIO_TABLE.
SELECT /BIC/ZPRODMOD FROM ZCURR_PM_T INTO TABLE ZPROD_MODEL WHERE /BIC/ZREGION = ZREGIO_TABLE-REGION.
APPEND ZPROD_MODEL.
ENDLOOP.
SORT ZPROD_MODEL.
CLEAR L_S_RANGE.
LOOP AT ZPROD_MODEL.
L_S_RANGE-LOW = ZPROD_MODEL-I_PROD.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.

Could it be that the code doesn't find any value in ZCURR_PM_T table for the specified input region?

Customer exit variable with exclusion

Similar Messages

Maybe you are looking for