PWVERSION sql error in dashboard builder

Hi all
We are currently attempting to deliver SAP Strategy Management through the dashboard builder as part of an integrated solution of SSM, Xcelcius and Webi. When we try to run SSM within a tab page on Dashboard Builder we get the following error;
Error: SqlStatement
Error: SqlStatement: SELECT * from PWVERSION
Error Code: no such table: PWVERSION
The SSM does not then start up.
This is a pioneering attempt to integrate the two tools in a portal style solution so any help would be very much appreciated.
Regards
Gareth

Thats right...
Err..Ohk. Don't tell me that you are using Hierarchical columns and other attributes in same prompt (i.e. Single GO Button)
Like you have columns like Region-Country-State-City and say Category in same prompt where Region-Country-State-City is hierarchy in OBIEE RPD.
You will have to create 2 seperate prompts here to get it work.
Prompt 1: Region-Country-State-City (Constraint on each level)
Prompt 2: Category and other attributes
This will have 2 prompts so 2 GO button. No way you can achieve this in Single GO even if you change the XMLs and all.
This is OBIEE logic working behind pulling the common fact and also fetching hierarchical data based on level above i.e. constraints here...
Hope this clears your doubt. Or may be give the exact structure of your prompts.

Similar Messages

Export to Excel Error in SQL Server 2014 Report Builder/Viewer

Hi,
I am using the 2014 version of ReportViewer in a WinForm to display an RDL report.
The report was originally created in Report Builder 2.0 (SQL 2008 R2), but has since been edited in Report Builder 3.0 (SQL 2014).
The report loads and displays OK, and even exports to Word and PDF. But when exporting to Excel and then opening the Excel document, the following error occurs:
"We found a problem with some content in <filename>. Do you want us to try and recover as much as we can? If you trust the source of this workbook, click Yes."
If you click Yes, then a second message appears:
"Removed Part: /xl/styles.xml part. (Styles)
Repaired Records: Cell information from /xl/worksheets/sheet1.xml part"
The Excel document then opens, and the data is there, but there is no formatting (no border columns, colours, bolds etc.)
The three interesting things are:
- When exported from SQL 2008 R2 Report Builder 3.0, which exports to .xsl instead of .xslx, it works
- A brand new report created in 2014 Report Builder 3.0 exports to .xslx great
- In Report Builder 2014, I stripped everything back and removed all rows and columns so the original table in the report only has one empty row and column it the export still errors - it is only by removing the original table and creating a brand new table
that export works OK
It appears to be a problem with the tablix, but ideally we don't want to have to recreate our reports from scratch to fix this issue.
Has anyone come across an issue like this before, and know of any potential resolutions to it?
Thank you.

Hello,
Based on your description, you render a report originally created in Report Builder 2.0 (SQL 2008 R2) and export the report to excel with format of Excel 2007-2010.
Edit the report in Report Builder will not upgrader the report. In that case the report still with SSRS 2008 R2 RDL schema. Please try to upgrade the report by open the report in Report Designer in SQL Server Data Tools (SSDT) and then try again.
If you don’t want to upgrade the report, please try to export the report
with Excel 2003 rendering extension and check if the issue persists.
The SQL Server 2014 and SQL Server 2012 Reporting Services Excel rendering extension renders a report to the native format of Microsoft Excel 2007-2010 with .xlsx as file extension. Only the Excel rendering extension is available by default.
You must update the Reporting Services configuration files to make the Excel 2003 rendering extension available.
For example, changing the value of Visible to
true in the following line in the RSReportServer.config:
<Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"
Visible="true"/>
Reference:Upgrade Reports
Exporting to Microsoft Excel (Report Builder and SSRS)
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Rep-1401: formula name : Fatal Pl/SQL error occured

Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
Thanks

Thanks for ur reply.
I used nvl too, but the same error occurred.
For the information in my question I by mistake typed
t_val := (f_val + 1)/s_val; --> this gives the above fatal error.
but when the value of f_val = zero and s_val is zero why it gives fatal error when i divide, i used nvl on both the variable while dividing but still got the same error.
but if s_val is greater than zero then no error occurs.
please help me, I feel it is a bug.

Rep-1401 : Fatal PL/SQL error occured

Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
Thanks

The best way to handle this is to just add an exception handler that handles a zero divide.
EX:
function...blah
var3:=var/var2...
EXCEPTION
when zero_divide then
var3:= 0;Zero Divide is a built-in exception to handle cases just like this - so if you run into it, you can set it to whatever you want

SQL error 3113 occurred when executing EXEC SQL.

Hi,
We are facing one typical problem, One background is failing regularly with
below dump. as we now got all notes giving information, if database restarted
taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
in this two servers are located in different place, in this job tries to connect
another server to get material statistics.
It is giving some error message in sm21 with
SQL error 3113 occurred when executing EXEC SQL.
work procees in reconnect mode.
all notes saying these types of dump occur when database restared, but this dump
even though database is up.
below is short dump, please can anyone help me from this problem.
ABAP runtime errors    DBIF_DSQL2_SQL_ERROR
      Occurred on    08.01.2007 at 00:30:28
>> Short dump has not been completely stored. It is too big.
SQL error 3113 occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "AZ1".
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel#"
Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DBIF_DSQL2_SQL_ERROR"
"ZM2431216 " or "ZM2431216 "
"EXTRACT_GENERAL_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in th
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error o
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "essceu3"
Network address.......... "172.19.119.198"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C7ADBD4C00"
Database server.......... "ukblx176"
Database type............ "ORACLE"
Database name............ "EU3"
Database owner........... "SAPR3"
Character set............ "es_ES.ISO8859-1"
SAP kernel............... "46D"
Created on............... "Jul 9 2006 20:26:33"
Created in............... "AIX 1 5 00447C4A4C00"
Database version......... "OCI_920__OCI_7_API "
Patch level.............. "2257"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
5, , System build information:,                                      , LCHN :
841480"
User, transaction...
Client.............. 600
User................ "MPZMMES"
Language key........ "S"
Transaction......... " "
Program............. "ZM2431216 "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZM2431216 " in
"EXTRACT_GENERAL_DATA".
The main program was "ZM2431216 ".
The termination occurred in line 980
of the source code of program "ZM2431216 " (when callin
The program "ZM2431216 " was started as a background jo
Source code extract
009500              mara.ntgew,
009510              mara.gewei,
009520              mara.volum,
009530              mara.voleh,
009540              mara.mstae,
009550              mara.mstde,
009560              mara.prdha,
009570              marc.matnr,
009580              marc.werks,
009590              marc.mmsta,
009600              marc.mmstd
009610        into :w_ops-groes,
009620              :w_ops-brgew,
009630              :w_ops-ntgew,
009640              :w_ops-gewei,
009650              :w_ops-volum,
009660              :w_ops-voleh,
009670              :w_ops-mstae,
009680              :w_ops-mstde,
009690              :w_ops-prdha,
009700              :w_ops-matnr,
009710              :w_ops-werks,
009720              :w_ops-mmsta,
009730              :w_ops-mmstd
009740        from sapr3.mara, sapr3.marc
009750        where sapr3.mara.mandt = sapr3.marc.mandt
009760          and sapr3.mara.matnr = sapr3.marc.matnr
009770          and sapr3.mara.mandt = :p_mandt
009780          and sapr3.mara.matnr = :w_ebs-matnr
009790          and sapr3.marc.werks = :p_owerks
    >    ENDEXEC.
009810 endform.                    " extract_general_data
009820 *&
009830 *&      Form append_i_ops
009840 *&
009850 *      Appends W_OPS to I_OPS
009860 *
009870 form append_i_ops.
009880    append w_ops to i_ops.
009890 endform.                    " append_i_ops
009900 *&
009910 *&      Form extract_material_description
009920 *&
009930 *      Extracts a Material Description from the remote database an
009940 *      modifies the current record in I_OPS.
009950 *
009960 *        >P_SPRAS Language Key
009970 *
009980 form extract_material_description using    p_spras.
009990    EXEC sql performing set_langauge.
Contents of system fields
SY field contents..................... SY field contents............
SY-SUBRC 0                            SY-INDEX 0
SY-TABIX 1                            SY-DBCNT 1
SY-FDPOS 18                            SY-LSIND 0
SY-PAGNO 0                            SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+..
W_EBS-PRAT4
                              2
                              0
W_OPS-GROES
                              22222222222222222222222222222222
                              00000000000000000000000000000000
W_OPS-BRGEW                    #######
                              0000000
                              000000C
W_OPS-NTGEW                    #######
                              0000000
                              000000C
regards,
krishnaiah.

Hi,
This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM. The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
side memory or other resource problem, or a DLL version mismatch, but this is
unlikely.
Enlist the assistance of your DBA. Then reproduce the ORA-3113 error on your
client application. Ask your DBA to look at the database side Alert.log and
trace files and look for ANY activity. Any activity that coincides with your
ORA-3113 will be a clue.
REgards
Vinod

While running the livecache server test a native sql error occures

We are using scm4.1 livecache 7.5.0 And every time we are running the livecache test program he is dumping
whith the following dump
patch level scm & scm_basis is 8
Runtime Errors DBIF_DSQL2_SQL_ERROR
Except. CX_SY_NATIVE_SQL_ERROR
Date and Time 31.10.2005 16:50:55
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error 600 occurred in the current database connection "LCA".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "Work rolled back: DbpError -28814 in
APS_ORDER_CH"
Database error code .......: 600
Triggering SQL statement...: " ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? or'"
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"/SAPAPO/SAPLOM_PLANNING" or "/SAPAPO/LOM_PLANNINGU08"
"/SAPAPO/OM_ORDER_CHANGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"/SAPAPO/OM_ORDER_CHANGE"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "bebruap2"
Network address.......... "195.213.49.227"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "BEBRUAP2"
Database type............ "MSSQL"
Database name............ "APD"
Database owner........... "apd"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 23 2005 00:00:49"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "87"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8176
EM....................... 24040336
Heap..................... 0
Page..................... 1687552
MM Used.................. 1516920
MM Free.................. 572032
SAP Release.............. "640"
User and Transaction
Client.............. 000
User................ "CGRAULS"
Language key........ "E"
Transaction......... "/SAPAPO/OM03 "
Program............. "/SAPAPO/SAPLOM_PLANNING"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLOM_PLANNING" in
"/SAPAPO/OM_ORDER_CHANGE".
The main program was "/SAPAPO/OM_TB_FLOW_QUANTITY ".
The termination occurred in line 91 of the source code of the (Include)
program "/SAPAPO/LOM_PLANNINGU08"
of the source code of program "/SAPAPO/LOM_PLANNINGU08" (when calling the
editor 910).
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "/SAPAPO/OM_ORDER_CHANGE" "(FUNCTION)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "/SAPAPO/SAPLOM_PLANNING ". Its source code
starts in line 5
of the (Include) program "/SAPAPO/LOM_PLANNING$08 ".
Source Code Extract
Line
SourceCde
61
is_gen_params-simversion
62
is_gen_params-dont_set_netchg_flag
63
space.
64
65
Kontrollstruktur IS_GET_CHANGED_OPTIONS anpassen.
66
IF NOT et_changed_orders IS REQUESTED.
67
is_get_changed_options-send_chg_top_order = gc_false.
68
ENDIF.
69
IF NOT et_changed_cap_reqs IS REQUESTED.
70
is_get_changed_options-send_chg_cap_req = gc_false.
71
ENDIF.
72
IF NOT et_changed_io_nodes IS REQUESTED.
73
is_get_changed_options-send_chg_ionode = gc_false.
74
ENDIF.
75
IF NOT et_changed_io_pp_nodes IS REQUESTED.
76
is_get_changed_options-send_chg_io_pp = gc_false.
77
ENDIF.
78
IF NOT et_changed_pegids IS REQUESTED.
79
is_get_changed_options-send_chg_pegid = gc_false.
80
ENDIF.
81
IF NOT et_deleted_fix_pegging IS REQUESTED.
82
is_get_changed_options-send_del_fix_peg = gc_false.
83
ENDIF.
84
start_function 'OM_ORDER_CHANGE'. "#EC *
85
Verbindung zum liveCache aufbauen
86
check_server.
87
connect_to_livecache.
88
COM-Routine zum Anlegen bzw. Überschreiben eines Zeitstrahls
89
90
EXEC sql.
>>>>>
execute procedure "APS_ORDER_CHANGE" (
92
in :ls_gen_com_params,
93
out :lv_rc,
94
in :et_rc,
95
in :it_order_method,
96
in :it_ordkeys,
97
in :it_ordmaps,
98
in :it_orders,
99
in :it_activities,
100
in :it_mode,
101
in :it_cap_reqs,
102
in :it_positions,
103
in :it_inputs,
104
in :it_outputs,
105
in :it_prodflow,
106
in :it_intern_constraints,
107
in :it_extern_constraints,
108
in :it_charact_val_acts,
109
in :it_charact_req_inpnode,
110
in :it_charact_val_outnode,
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Flow Quantity Test
SY-MSGTY
S
SY-MSGID
/SAPAPO/OM_TEST
SY-MSGNO
001
SY-MSGV1
Create transSim
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
3 FUNCTION /SAPAPO/SAPLOM_PLANNING /SAPAPO/LOM_PLANNINGU08 91
/SAPAPO/OM_ORDER_CHANGE
2 FORM /SAPAPO/OM_TB_FLOW_QUANTITY /SAPAPO/OM_TB_FLOW_QUANTITY 802
CHANGE_DATA
1 EVENT /SAPAPO/OM_TB_FLOW_QUANTITY /SAPAPO/OM_TB_FLOW_QUANTITY 11
START-OF-SELECTION
Chosen variables
Name
Val.
No. 3 Ty. FUNCTION
Name /SAPAPO/OM_ORDER_CHANGE
IS_ATP_INFO
01ATP0000001~CGRAULSXX##
334553333333744545455500
011400000001E37215C38800
000000000000000000000000
000000000000000000000000
IS_CONTROLPARAMETERS
霁က#ం̂⍱㔒鲔#####
2222222222222222222222001007190000022
0000000000000000000000100221240000100
0000000000000000000000910002390000000
0000000000000000000000700C335C000C000
IS_GEN_PARAMS
01PLV0000001~CGRAULS
3354533333337445454522222
010C60000001E37215C300000
0000000000000000000000000
0000000000000000000000000
IS_GET_CHANGED_OPTIONS
2222222
0000000
0000000
0000000
IT_ACTIVITIES
Table IT_274[1x256]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ACTIVITIES
Table reference: 41
TABH+ 0(20) = 5087FFDF00000000000000002900000012010000
TABH+ 20(20) = 0100000000010000FFFFFFFF0487000000290000
TABH+ 40( 8) = 10000000C1308000
store = 0x5087FFDF
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 41 (0x29000000)
label = 274 (0x12010000)
fill = 1 (0x01000000)
leng = 256 (0x00010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000205
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x180112E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 126 (0x7E000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CAP_REQS
Table IT_276[1x112]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_CAP_REQS
Table reference: 39
TABH+ 0(20) = 48BB06E000000000000000002700000014010000
TABH+ 20(20) = 0100000070000000FFFFFFFF04870000C0290000
TABH+ 40( 8) = 10000000C1308000
store = 0x48BB06E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 39 (0x27000000)
label = 276 (0x14010000)
fill = 1 (0x01000000)
leng = 112 (0x70000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000209
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x188D04E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 124 (0x7C000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_REQ_INPNODE
Table IT_418[0x140]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_REQ_INPNODE
Table reference: 32
TABH+ 0(20) = 00000000000000000000000020000000A2010000
TABH+ 20(20) = 000000008C000000FFFFFFFF04870000301D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 32 (0x20000000)
label = 418 (0xA2010000)
fill = 0 (0x00000000)
leng = 140 (0x8C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000142
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_VAL_ACTS
Table IT_417[0x156]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_VAL_ACTS
Table reference: 50
TABH+ 0(20) = 00000000000000000000000032000000A1010000
TABH+ 20(20) = 000000009C000000FFFFFFFF04870000901D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 50 (0x32000000)
label = 417 (0xA1010000)
fill = 0 (0x00000000)
leng = 156 (0x9C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000144
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_VAL_OUTNODE
Table IT_419[0x156]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_VAL_OUTNODE
Table reference: 60
TABH+ 0(20) = 0000000000000000000000003C000000A3010000
TABH+ 20(20) = 000000009C000000FFFFFFFF04870000901D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 60 (0x3C000000)
label = 419 (0xA3010000)
fill = 0 (0x00000000)
leng = 156 (0x9C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000144
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_EXTERN_CONSTRAINTS
Table IT_416[0x124]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_EXTERN_CONSTRAINTS
Table reference: 71
TABH+ 0(20) = 00000000000000000000000047000000A0010000
TABH+ 20(20) = 000000007C000000FFFFFFFF04870000E02A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 71 (0x47000000)
label = 416 (0xA0010000)
fill = 0 (0x00000000)
leng = 124 (0x7C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000215
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_INPUTS
Table IT_278[1x420]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_INPUTS
Table reference: 63
TABH+ 0(20) = 087400E0C0E303E0000000003F00000016010000
TABH+ 20(20) = 01000000A4010000FFFFFFFF04870000202A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x087400E0
ext1 = 0xC0E303E0
shmId = 0 (0x00000000)
id = 63 (0x3F000000)
label = 278 (0x16010000)
fill = 1 (0x01000000)
leng = 420 (0xA4010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000211
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x78DC11E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 123 (0x7B000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x2029FFDF
hsdir = 0x00000000
ext2 = 0x00000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_INTERN_CONSTRAINTS
Table IT_415[0x124]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_INTERN_CONSTRAINTS
Table reference: 49
TABH+ 0(20) = 000000000000000000000000310000009F010000
TABH+ 20(20) = 000000007C000000FFFFFFFF04870000E02A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 49 (0x31000000)
label = 415 (0x9F010000)
fill = 0 (0x00000000)
leng = 124 (0x7C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000215
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_MODE
Table IT_275[1x164]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_MODES
Table reference: 52
TABH+ 0(20) = A03C00E000000000000000003400000013010000
TABH+ 20(20) = 01000000A4000000FFFFFFFF0487000060290000
TABH+ 40( 8) = 10000000C1308000
store = 0xA03C00E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 52 (0x34000000)
label = 275 (0x13010000)
fill = 1 (0x01000000)
leng = 164 (0xA4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000207
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC8F611E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 125 (0x7D000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDERS
Table IT_293[1x320]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDERS1
Table reference: 47
TABH+ 0(20) = 20B403E000000000000000002F00000025010000
TABH+ 20(20) = 0100000040010000FFFFFFFF0400000030380000
TABH+ 40( 8) = 01000000C1308000
store = 0x20B403E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 47 (0x2F000000)
label = 293 (0x25010000)
fill = 1 (0x01000000)
leng = 320 (0x40010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000286
occu = 1 (0x01000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x9080FFDF
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x01000000)
lineAlloc = 1 (0x01000000)
store_id = 130 (0x82000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDER_METHOD
Table IT_268[2x62]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDER_METHOD
Table reference: 51
TABH+ 0(20) = 8882FFDF0000000000000000330000000C010000
TABH+ 20(20) = 020000003E000000FFFFFFFF04000000B0360000
TABH+ 40( 8) = 10000000C1248000
store = 0x8882FFDF
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 51 (0x33000000)
label = 268 (0x0C010000)
fill = 2 (0x02000000)
leng = 62 (0x3E000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000278
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0868FFDF
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 122 (0x7A000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDKEYS
Table IT_271[1x332]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDKEYS
Table reference: 29
TABH+ 0(20) = 80E303E000000000000000001D0000000F010000
TABH+ 20(20) = 010000004C010000FFFFFFFF04870000E0270000
TABH+ 40( 8) = 10000000C1308000
store = 0x80E303E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 29 (0x1D000000)
label = 271 (0x0F010000)
fill = 1 (0x01000000)
leng = 332 (0x4C010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000199
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0

Hi,
the error DbpError -28814 denotes that an object cannot be found.
Can you maybe tell me your exact liveCache version (incl. Build level) and LCA Build?
Additionally, please copy the relevant error information from the file (/sapdb/data/wrk/<SID>/)knldiag.err into this thread.
Which exact 'liveCache test program' are your referring to (which of the /SAPAPO/... transactions)?
Kind regards,
Roland

REP-1401 'beforereport' Fatal PL/SQL error occurred. ORA 00000 normal.

Hi,
I am running the report Journals - General (132 char)- file name GLRGNJ.rdf from
Oracle Report Builder 6.0.8.11.3.
I have commented all the (srw.user_exit) in the Before Report trigger but i still
get the message:
REP-1401 'beforereport' Fatal PL/SQL error occurred. ORA 00000 normal,
successful completion.
Can anyone suggest a solution please?
Thanks,
Faris

Dear sir, i am created one formula column in Reports6i and the following error has come. Could u please find out a solution. Thanks in advance.
my function is below
function CF_Branch_NameFormula return Char is
lc_branch_name varchar2(100);
begin
SELECT rtrim(substr(FVT.DESCRIPTION
,instr(FVT.DESCRIPTION,'-',1)+1
,100)) INTO lc_branch_name
FROM FND_FLEX_VALUES FFV, FND_FLEX_VALUES_TL FVT
WHERE FFV.flex_value_Set_id = 1007956
AND FFV.FLEX_VALUE_ID = FVT.FLEX_VALUE_ID
AND FFV.FLEX_VALUE = FVT.FLEX_VALUE_MEANING
AND FVT.DESCRIPTION <> 'xxx'
and rownum<=1
AND SUBSTR(FVT.FLEX_VALUE_MEANING,3,2) = :P_BRANCH;
return (lc_branch_name);
end;

SQL error in the database when accessing a table.

Hi,
I got below error at production server. Please suggest how to reslove this error.
 
 
 
Runtime Errors DBIF_RSQL_SQL_ERROR
 
Exception CX_SY_OPEN_SQL_DB
 
Date and Time 02.01.2011 15:55:06
 
 
 
 
 
Short text
 
SQL error in the database when accessing a table.
 
 
 
How to correct the error
 
Database error text........: "[10054] TCP Provider: An existing connection was
 
forcibly closed by the remote host.
 
[10054] Communication link failure"
 
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
 
Please check the entries in the system log (Transaction SM21).
 
 
If the error occures in a non-modified SAP program, you may be able to
 
find an interim solution in an SAP Note.
 
If you have access to SAP Notes, carry out a search with the following
 
keywords:
 
 
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
 
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
 
| "ADD_INSTANCE"
 
 
 
Information on where terminated
 
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
 
in "ADD_INSTANCE".
 
The main program was "SAPMSSY1 ".
 
 
In the source code you have the termination point in line 16
 
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
 
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
 
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
 
declared
 
in the RAISING clause of its signature.
 
 
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
 
code begins in line
 
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
 
 
 
 
Source Code Extract
 
 
Line
SourceCde
 
 
1
METHOD add_instance .
 
2
 
3
data: ls_id type swfcntbuf.
 
4
 
5
check buffer method - store in local buffer if necessary
 
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
 
7
 
8
CHECK m_buffer_method EQ mc_buffer_shared.
 
9
 
10
append key to list of tasks to add stored in database table SWFCNTBUF
 
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
 
12
 
13
ls_id-mandt = sy-mandt.
 
14
ls_id-id = ibf_por.
 
15
 
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
 
17
FROM ls_id.
 
18
 
19
IF sy-subrc EQ 0.
 
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
 
21
database locks
 
22
COMMIT CONNECTION r/3*wfcontainer.
 
23
ENDIF.
 
24
 
25
ENDMETHOD.
 

duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum.

REP-1401: 'cf_1formula': Fatal PL/SQL error occurred.

Hi all,
I am using the barcodes example which is on otn.
I am getting the result on the development side which is my local set-up. (windows-2000) and i am using Report Builder 9.0.4.0.21.
I am able to see the barcode.
If i try the same thing on my deployment side which on my AS(Application server) which on UNIX platform .
I am getting the below error....
REP-1401: 'CF_1FORMULA0031': Fatal PL/SQL error occurred.
ORA-39565: Message 39565 not found; product=RDBMS; facility=ORA
I had gone thru metalinks and i found few docks saying change of width of file_name
I am enclosing the details
the below is the change i did in rep_<server>.conf
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000" classPath="$ORACLE_HOME/reports/jlib/oraclebarcode.jar">
and i had made an entry in reports.sh as mentioned in one of the docs in metalinks.
and i had changed the width of
myfilename varchar2(20);
to
myfilename varchar2(256);
and CF_1 width to same
The code in
function CF_1FORMULA0031 return Char is
myfilename varchar2(256);
result varchar2(20);
barcodeData VarChar2(50) := :order_ID;
begin
myFileName := srw.create_temporary_filename;
barcodemaker.setBarWidthInch(globals.bcobj, 0.005);
barcodemaker.setBaseCodeData(globals.bcobj,barcodeData);
barcodemaker.setBarCodeType(globals.bcobj,globals.barcode_to_use);
myfilename := barcodeData;
barcodemaker.setFullPath(globals.bcobj, myFileName);
barcodemaker.renderBarCode(globals.bcobj);
return(myfilename);
end;
and i had opened the trace on and my trace says the below....
[2004/4/9 8:10:50:171] Debug 50103 (EngineManager:spawnEngine): Start engine command line = $ORACLE_HOME/bin/rwengine.sh -server -cp $ORACLE_HOME/reports/jlib/oraclebarcode.jar:$ORACLE_HOME/j2ee/home/lib/ojsp.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:$ORACLE_HOME/jlib/zrclient.jar -Xbootclasspath/p:$ORACLE_HOME/vbroker4/lib/vbjboot.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=rep ORACLE_HOME=/ora10g engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=$ORACLE_HOME/reports/logs/rep/rwEng-0.trc tracemode=trace_replace cacheDir=$ORACLE_HOME/reports/cache
which means the server is picking the jar files....
can any one tell me what can be the issue......
Advise me at the earliest................
cheers,
ALI

Hi Aamir,
The problem is that divisor by 0 (zero) is not possible.
So you need to make sure that in your calculation there's no division by zero.
In your case :bugamt is equal to zero then you will get this error.
So just make sure that :bugamt is not equal to zero.
You can do this as follows:
function avggFormula return Number is begin
IF :bugamt != 0 THEN
:cp_1 := (:bugamt-nvl(:totexp,0)/:bugamt)*100 ;
END IF;
return(:cp_1);
end;
Regards
Arif

Iam getting the error REP-1401: '': Fatal PL/SQL error occurred. when i

When i run the report to generate xml file in report builder the following error messages are displayed.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
pls help me.Its urgent
Regards,
Kranthi

Hi;
What is EBS version? Is it custom report or not?
See below which is mention similar errors
Autoinvoice Error: ORA-1403: no data found [ID 1209403.1]
APXIIMPT - Payable Open Interface Import Fails on "REP-1401: 'cf_source_nameformula': Fatal PL/SQL error occurred. ORA-01403: no data found" [ID 222058.1]
Regard
Helios

REP-1401: FATAL PL/SQL ERROR OCCUARED

I make below in function in report builder,give me fatal pl/sql error
i can`t handle it please any tips
function CF_PERF_COMENTFormula return Number is
V_VALUE_COMMENT_EMP VARCHAR2(2000);
V_VALUE_PERF_ID_EMP NUMBER(15);
V_VALUE_PERF_NAME_EMP VARCHAR2(80);
V_VALUE_COMMENT VARCHAR2(2000);
V_VALUE_PERF_ID NUMBER(15);
V_VALUE_PERF_NAME VARCHAR2(80);
begin
V_VALUE_COMMENT_EMP := 'N/A';
V_VALUE_PERF_ID_EMP := 1001;
V_VALUE_PERF_NAME_EMP := 'N/A';
V_VALUE_COMMENT := 'N/A';
V_VALUE_PERF_ID := 2002;
V_VALUE_PERF_NAME := 'N/A';
IF :PERSON_ID_C = :OWNING_PERSON THEN
SELECT pp1.comments,
pp1.performance_level_id
INTO
V_VALUE_COMMENT_EMP,
V_VALUE_PERF_ID_EMP
FROM per_performance_ratings pp1, per_objectives po
WHERE po.objective_id = :objective_id
   AND pp1.objective_id = po.objective_id
   AND PP1.PERSON_ID = :PERSON_ID_C
   AND pp1.person_id != -1;
SELECT NVL(NAME,'N/A')
INTO
V_VALUE_PERF_NAME_EMP
FROM PER_RATING_LEVELS
WHERE
RATING_LEVEL_ID = V_VALUE_PERF_ID_EMP;
:CP_VALUE_COMMENT_EMP := V_VALUE_COMMENT_EMP;
:CP_VALUE_PERF_NAME_EMP := V_VALUE_PERF_NAME_EMP;
ELSE
SELECT NVL(pp1.comments,'N/A'),
NVL(pp1.performance_level_id,'1002')
INTO
V_VALUE_COMMENT,
V_VALUE_PERF_ID
FROM per_performance_ratings pp1, per_objectives po
WHERE po.objective_id = :objective_id
   AND pp1.objective_id = po.objective_id
   AND PP1.PERSON_ID != :PERSON_ID_C
   AND pp1.person_id != -1;
SELECT NVL(NAME,'N/A')
INTO
V_VALUE_PERF_NAME
FROM PER_RATING_LEVELS
WHERE
RATING_LEVEL_ID = V_VALUE_PERF_ID;
:CP_VALUE_COMMENT := V_VALUE_COMMENT;
:CP_VALUE_PERF_NAME := V_VALUE_PERF_NAME;
END IF;
RETURN 0;
end;

Did you try whatever i suggested? What happened? Because sometimes it is behaving like this in my report builder then i just close the report builder and reopening it. It will work.

REP -1401 Fatal PL/SQL error occurred.

Hi All,
In my rdf report i have a formula column with the following code in it..
function CF_PO_NumberFormula return Char is
cursor cur_pending_po
is
select distinct pll.po_header_id
               from
               PO_LINE_LOCATIONS_ALL pll,
               po_lines_all pla
               where 1=1
               and pll.po_line_id=pla.po_line_id
               and pll.org_id=pla.org_id
               and pll.org_id=5050
          and pla.item_id=:inventory_item_id
               and (pll.quantity-pll.quantity_received)>0
               AND EXISTS(SELECT 1 FROM PO_HEADERS_ALL PHA
          WHERE PLL.PO_HEADER_ID=PHA.PO_HEADER_ID
          AND PHA.APPROVED_FLAG='Y'
          AND PHA.CLOSED_CODE IS NULL)
               order by pll.po_header_id;
po_num     varchar2(4000);
begin
po_num:=null;
for rec_cur_pending_po in cur_pending_po
loop
select segment1||','||po_num into po_num
from
po_headers_all
where 1=1
and po_header_id=rec_cur_pending_po.po_header_id;
end loop;
return rtrim(po_num,',');
exception
     when others then
     po_num :=null ;
return po_num;
end;
when i am running the report, it is getting errored out..following is the log file message...
Arguments
P_ORGANIZATION_ID='5100'
P_FROM_DATE='2009/08/31 13:30:00'
P_TO_DATE='2009/09/02 13:30:00'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/app/oapps/11.5.5/opm7ora2/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /app/oapps/11.5.5/opm7ora2/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
REP-1401: 'cf_po_numberformula': Fatal PL/SQL error occurred.
Report Builder: Release 6.0.8.27.0 - Production on Thu Sep 10 11:38:18 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 25343374.
Review your concurrent request log and/or report output file for more detailed information.
Can Anyone help me on this..

I would suggest the best place to start is with some diagnostics - first of all in the exception handler. Try
SRW.MESSAGE(999,'PO number formula failed - '||sqlerrm);
This will give you more information as to the exact error which occurred.
Also, I hope you have tested the query separately before putting it in the report! - may be an obvious one, but it is possible that you may have a data size problem on the po_num variable. Do you know how many rows the cursor will return?
This should give you somewhere to start.
Edited by: mike_p on Sep 11, 2009 2:09 PM
Edited by: mike_p on Sep 11, 2009 2:10 PM

Fatal PL/SQL error when calling imported java code

Hi,
I'm developing reports using Report builder 9.0.2 under Win2k and I have the following problem:
I select data into fieds A and B.
I created 2 formulas fA and fB that call a PLSQL function from my report in order to convert A and B based on other data.
I also have a formula fC which is actually fA-fB
I have 3 summary columns on fA, fB and fC. I don't display any of those columns on the report but I created other formulas columns fA_Fmt, fB_Fmt,... to format the values using an imported java class.
This java class is static.
so fA_Fmt looks like this:
function fA_Fmt return Char is
begin
return MyJavaClassPackageName.formatValue( :fA, report_global_variable );
end;
When I run my report under report builder, I get a REP-1401 report error like "fA_Fmt formula: fatal PL/SQL error occured
ORA-39565: Message not found, product RDBMS, facility: ORA"
This happens randomly on any of the formulas.
Sometimes I even get a java.lang.StaskOverFlowError and I have to close and restart report builder.
I've tried to debug and I even caught the exception.
The parameters passed to the java method are fine.
The exception number is 105101 and after a couple of exceptions like this, visual C++ runtime library tells me there's a runtime error in rwbuilder.exe and the application crashes.
I don't know if it's Java, if it's Report builder or even Win2k.
Anyway, I'm stuck with that and I don't know what to do to fix it.
Any idea or work around?
Thanks
Manu

Hi Manu
I suspect the line given below:
return MyJavaClassPackageName.formatValue( :fA, report_global_variable );
Do not pass report values directly. Instead, assign it to a temporary variable and try again. See if this works:
temp1 <Variable_Type>;
temp2 <Variable_Type>;
temp1 := :fA;
temp2 := report_global_variable;
return MyJavaClassPackageName.formatValue( temp1, temp2 );
Note: You may also hit Fatal PL/SQL errors if the arguments happen to be invalid.
Regards
Sripathy

Displaying full sql error text?

I'm using getErrorCode() and getMessage() to display the following for an sql error
SQL error: SQLCODE: -551, SQLSTATE: 42501, SQLERRMC: auth-id ;operation;object-name
The SQLERRMC only has the auth-id, operation and object-name. How do I build this error message without doing it manually (detect 551 and build the error string)?
auth-id DOES NOT HAVE THE PRIVILEGE TO PERFORM OPERATION operation ON OBJECT object-name

Write an abstract DataAccessException class for your data that wraps a java.sql.SQLException and subclass it for this particular database.Then have the concrete class do the work of checking the SQL error code and state and put out a nicer error message.
That's what Rod Johnson recommends in his "Expert 1-On-1 J2EE".

Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed

Hi,
I am facing a problem while adding a new parameter n my JSP Report JDBC query based on a ref-cursor from a stored procedure define in a package in database.
No problem at database level, I have added the new parameter in package specification and Package body for that procedure and compile my package, it complies without any error and warning.
but when I open the report and add parameter in the report JDBC query window, then it is generating a error message,
"Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed "
and I am unable to add the new parameter in report.
e.g.
Actual which was working is:
My-package.My-procedure(:P1,:P2,:P3 ,:P4,:P5,:P6,:P7)
I want to do this:
My-package.My-procedure(:P1,:P2,:P3 ,:P4,:P5,:P6,:P7,:P8)
but unable to do due to this error message:
("Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed ")
Reports Builder 10g:
Database 10g:
Operating system windows XP:
using JDBC Query base on ref-cursor coming from the stored procedure define in the Package.
Regards,
Khan

and compile my package, it complies without any error and warning.That doesn't mean anything in this case. You are getting a runtime error, not a compilation error. The error is coming when you execute your procedure.
Did you test your modified procedure in sqlplus or SQL Developer?

PWVERSION sql error in dashboard builder

Similar Messages

Maybe you are looking for