PXI-5406: unable to generate 10 mV p-p sine wave with 1.5 V dc offset

I'm using the PXI-5406 and FGEN Soft Front Panel to output a low amplitude sine wave. It works fine when I have the amplitude set to 10 mV and the DC offset set to 1V but when I increase the dc offset (I want it to be set to 1.5V) the FGEN front panel reports an error and stops outputting the wave. It starts working when I have the DC offset set to 1.5V and the amplitude increased to 50 mV. Any ideas on how to output a sine wave with 10mV amplitude (p-p) and 1.5V dc offset with the PXI-5406?
Thanks,
Rachel

I also wanted to mention that while using the FGEN Soft Front Panel, some of the settings are coerced to set values (particularly Digital Gain). Is it possible for you to use the driver API through LabVIEW or another program? This would allow greater control and a potential workaround.(set Gain to a value less than one (0.25) and the Amplitude to a value to 40mV).
Evan S.
National Instruments

Similar Messages

Generate and record sine wave with GB

Is there a way to generate and record a sine wave with GB? I need to record a 20khz tone and put it to track. Thanks!

Thanks. The purpose of this was to 'fool' the horrible compressor/encoder over at Youtube. Inserting a 20khz tone in the mix tricks the compressor and effectively bypasses Youtube's butchering device. What I did was downloaded Audacity (free) for Mac. Audacity has a 'generate tone' capability which can be recorded. I then 'exported' my 20khz tone as a wav file and 'imported' same into my GB mix. Et voila! I can now mix my sine wave tone to the specified 'workaround' levels which I had seen posted on the net. ~King

Help needed with generating a sine wave with NI-5640R card

Hi there,
I have created a simple programe using the 5640R card, and i am attaching the programe to this question. Using a "sine generation" function/block i am generating a sine wave and outputting to one of the o/p ports and then i am connecting that o/p port to one of the i/p ports using a cable. Then i am plotting what ever i have recieved through the i/p port (this has to be same as what is generated using "sine generator" ). The graph shows that i am not receiving aything from the i/p port, but when i plot the o/p of the "sine generator", i see that the sine generator is generating the sine wave. Please refer to the attached figure and please tell me what mistake i have made in this simple programe.
Thanks,
Sandeep.
Message Edited by sandeep palreddy on 07-08-2007 12:46 PM
Sandeep Palreddy, Graduate Research Assistance
The Microwave Remote Sensing Laboratory (MIRSL)
University of Massachusetts
151 Holdsworth Way
Amherst MA 01003-9284
Attachments:
figure.doc ‏27 KB
figure.doc ‏27 KB

Hi sandeep
This small segment of code will not work on the NI PCI-5640R. This module does not support running the FPGA Vis directly. A Host VI must be run that calls to the FPGA Vis.
I suggest that you look at the ni5640R Analog Input and Output example that is installed by the NI PCI-5640R software.
Jerry
PS: Make sure that you are using the NI PCI-5640R software version 1.1.

Ni5401 how to generate 4 cycles of a sine wave at a time

I'd like to generate 4 cycles of a 100kHz sine wave using a ni5401. I'm currently able to generate a sinewave at 100kHz countinuously, but I need to stop after 4 cycles and then do some other processing and then restart another 4 cycles and then stop etc... any help is appreciated

hi htch,
Unfortunately this isn't really the ideal application for a 5401. This application is something that could be accomplished fairly easily with an arbitrary waveform generator, or even a multifuction DAQ card, as long as it had a sample rate of at lease 2 MS/s. The 5401, however, is an arbitrary function generator, which means that it is meant to generate continuously, not a finite number of samples.
What you could try to do is use software timing to exit the loop after a certain amount of time has elapsed. However, you must keep in mind that software timing is not as accurate as hardware timing, and you may not generate exactly the amount of samples that you expect.
Regards,
Leah
National Instruments
Applications Engineer

Test Bench generating sine wave with noise when simulating Compact Rio on Dev Computer

How do I create a simulated IO vi. I have tried to follow the tutorial but it didn't work. Do I need a pre filled array with data for the running case or can I generate it with an express vi? My IO vi doesn't seem to enter Running case ever. What is the process of executing this VI? is it run once or every time the main vi tries to sample some data?

Hello I've a similar problem. I want ot simulate a sinusoidal input for my cRIO and I followed the example about the Dynamic IO generation but when I launch my VI with the light bulb on for every iteration I get the same value for my Module.
Here are my VIs

Generate two sine waves with time delay

I have not been using the waveform generation tools so I hope this is an easy one for somebody. I want to create two sine waves at different frequencies say F1 = 1.00 KHz and a second at F2 = 1.20 KHz. I know that to combine them into one I can just add them. Them problem I have is that I want F1 to start first then a few millisecond later have F2 sum into F1.
T0 = F1
T0 + Delay = F1 + F2
Is there a VI capable of a time delay? Tried to sum individual signals together but seems more difficult because of the waveform cluster format.
Any help is appreciated,
Matt
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Would the attached VI work for you?
Attachments:
Add Delayed Sinewave.vi ‏54 KB

Generating a sine wave using PXI 5441

How to generate a sine wave using PXI 5441 (Arbitrary Waveform Generator)?
Can anybody post a vi that generates a sine wave with frequency at a user defined frequencies.
Thanks in advance.

Hi Venki,
When using an arbitrary waveform or user-defined
waveform, you provide the actual waveform you want to generate to
the device, so it is easy to also just connect a graph to the waveform
and see what it looks like. Unfortunately, when using standard function generation (which is the method used in this example), you are not providing a signal that is created in software. Because the standard function
generation is happening on the FGEN and not in software, there is
really no way to display the exact signal without measuring
it on a scope or some device. You can, however, simulate the signal in
software such that the parameters which are given to the FGEN functions
are the same parameters that you use to generate a simulated wave. This
would be somewhat complex since you can change parameters such as
frequency and amplitude on-the-fly, and also you would need separate
functions for each of the different signal types available for the
FGEN. You would need to place the software waveform generator in your
inner loop and have a waveform graph connected to it in the loop as
well to display the signal. The main thing to keep in mind is that this
will only be a simulated signal and so it may not exactly match what is
being generated (this also depends on how you program the simulation to
work). Hope this helps,
Daniel S.
National Instruments

PXI-board only returns perfect sine wave

Hi, everyone!
This is a strange one:
Im peforming synchronized sampling from two boards; one is a PCI-6224 in my computer and the other a PXI-6229 located in our PXI-system. Being a rookie when it comes to labview, I was quite proud of myself for managing this all by myself. However, when i looked closer at a 10 sec test-record I noticed something peculiar. Although none of the 32 (differential) channels had inputs during the recording, the PXI-board returned 16 perfect 1 Hz sine waves with exactly the same amplitude as the measurement range. Attaching a signal to the terminal block didn't alter this. The PCI-board returns only weak 50 Hz (power network) noise, as expected. What is going on ??
I'm using a PXI-1031 chassis together with a PXI-8184 controller connected to the PC with a network cable. I trigger the pxi-board by sending the PC-clock through a PFI-port and a physichal wire.
regards, Einar

As I said, I haven't used LabVIEW 8 all that much. It's a bit tricky: you'll have to make a new Project, add the PXI as a new Target, and the add the VI you're trying to run underneath the new target. The last time I was playing with this I also had to open some ports in the Windows XP firewall.
If this is all a bit much for you, you might have a PXI controller that is configured to dual-boot both LabVIEW RT and Windows XP. If you reboot the controller in Windows XP mode, you can then access the PXI-6229 in the same way you currently access the PCI-6224... provided you don't mind copying the VIs over and hooking up a mouse, monitor, and keyboard to the PXI.
Switching from LV RT to Windows XP is most easily done by selecting the appropriate option in the PXI's BIOS. Check your PXI controller's manual for details.

Generating sine wave

Hello,
I have a small labview problem.
I want to generate a sine wave pulse with labview and send this to a pc oscilloscope by using my soundcard.
First VI I made creates a sine wave and sends it to the pc oscilloscope. Works perfectly.
But now i want to create a sine wave with only one period (second VI). Problem is then that the VI blocks if i want a high frequency (I need 10kHz)
So the VI works on low frequencies but gives this error with higher frequency:
"the sound driver or card does not support the desired operation."
Can somebody give a solution for my second VI (creating sine with one period on 10kHz).?
Thanks in advance!
Jelle
Solved!
Go to Solution.
Attachments:
GeneratingSineWaveManyPeriods.vi ‏59 KB
GeneratingSineWave1period.vi ‏37 KB

Hello Benje,
The problem/difference you're seeing is indeed in the coding and also in the sound card.
In the "working" example you're using the Simulate Signal VI with the following settings:
- 44100 samples per second (sample rate)
- Number of samples 10000 (samples per generation cycle)
In the non working example you specify:
- sample rate = 1000*"Frequency Control value". This sampling info should be fixed to (for example) 441000 Hz.
- Number of samples 1000 (samples per generation cycle)
As a sidenote:
Is there any reason why you used different functions to generate similar signals in the 2 VI's?
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

LabVIEW FPGA Sine Wave Generator Reset Input Behavior

I would like to know what the output from the Sine Wave Generator express VI is while the reset input is true, and what happens to the output immediately after the reset input is set false.
I need to generate a regular sequence of positive half-cycles of a sine wave, with an arbitrary delay between them that is not related to the actual frequency of the sine wave. So my plan is basically to periodically fire a trigger in the fpga software that resets a sine wave generator and directs its output to an analog output until the sine wave goes negative, at which point the analog output is set to 0 until the next trigger.
Thanks

Muchas gracias por responder steve.bm
El problema que tengo es el siguiente, estoy desarrollando un proyecto en el cual uso los conversores DAC y ADC de la tarjeta FPGA Spartan 3E para lo cual use como base el proyecto que esta subido por la NI que se encuentra en uno de los enlaces que me dejaste,( Lesson 8 - Linking Existing VHDL Code from WebPACK into LabVIEW FPGA) del mismo solo modifique para usar el ADC y el DAC mediante el cual adquiero una señal senosoidal y la tengo que reconstruir, el problema es que como uso un generador de señal de laboratorio al ingresar la frecuencia de muestreo para obtener una buena reconstruccion, la frecuencia se baja lo cual en el proyecto real no podra pasar ya que la frecuencia ya en proyecto final la adquiero de la red electrica publica pero ahora para pruebas estoy con un generador, la verdad no se que pasa porque tiene un retrazo la señal.....
Te parece si te puedo dejar mi proyecto subido en enlace para que lo revices ??

Installation Problem on 11g, RHEL 5 - Unable to generate temporary script

Hello all,
This is for the first time i am encountering this kind of error on 11g. Half way through installation i get this error.
All parameters set correct, used the official installation technique (works fine previously), except for this time i am getting a weird error, which does not allow me to continue with the installation.
Please help.
Environment
Oracle 11g
RHEL 5
Error on GUI -
OUI-10053: Unable to generate temporary script: {0}. Unable to continue install
Error on command prompt -
OUI-10053:Unable to generate temporary script: /u01/app/oraInventory/orainstRoot.sh. Unable to continue install.
Help appreciated.
Thanks

Hi Monu Koshy
Can you please control the user rights and also the df ?
ls -al /u01/app/oraInventory/
df -h /u01/app/oraInventory/
Regards,
Hub

Login page not showing "Unable to generate forwarding URL. Exception:"

Dear All,
I have install the EBS R12 on RHEL 5.5 64bit. All run fine some days but one day after restart there is a issue on database we rectify that DB issue but after that we are not able to get the login page. ALL application/DB node process are end with exiting with status 0. we have tried adautocfg.sh with status 0.
still getting login page as blank.
showing msg:
Unable to generate forwarding URL. Exception: oracle.apps.fnd.cache.CacheException
I got on file javacache.log . i think this is showing error logs.
/u02/oracle/PROD/inst/apps/PROD_apex/logs/appl/rgf
$ vi javacache.log
showing issue:
correct one :
[2013-02-25T15:10:48.994+05:30] [ias] [NOTIFICATION] [] [cache.Lifecycle] [host: apex] [nwaddr: 192.168.0.4] [tid: 11] [userId: applmgr] [ecid: 1361785246:192.168.0.4:6700:0:2,2] JOC is initialized. ver=10.1.3, distribute=true, vid=2, coordinator=[192.168.0.4:61230, pos=0, uid=0, pri=0, def=prop:NA], discover list=[[192.168.0.4:12345, pos=-1, uid=0, name=, pri=0]]
log having problem:
[2013-03-01T14:40:52.083+05:30] [ias] [ERROR] [] [cache] [host: apex] [nwaddr: 192.168.0.4] [tid: 12] [userId: applmgr] [ecid: 1362129052:192.168.0.4:3933:0:102,2] [[
oracle.apps.jtf.base.resources.FrameworkException
at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:234)
at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:201)
at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:176)
at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:151)
at oracle.apps.jtf.cache.GenericCacheLoader.load(GenericCacheLoader.java:87)
at oracle.ias.cache.CacheLoader.callLoad(Unknown Source)
at oracle.ias.cache.CacheHandle.findObject(Unknown Source)
at oracle.ias.cache.CacheHandle.locateObject(Unknown Source)
at oracle.ias.cache.CacheAccess.get(Unknown Source)
at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:771)
at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802)
at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624)
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216)
at oracle.apps.fnd.functionSecurity.User.getUser(User.java:338)
at oracle.apps.fnd.functionSecurity.FunctionSecurity.getUser(FunctionSecurity.java:527)
at oracle.apps.fnd.functionSecurity.FunctionSecurity.init(FunctionSecurity.java:1620)
at oracle.apps.fnd.functionSecurity.FunctionSecurity.<init>(FunctionSecurity.java:188)
at oracle.apps.fnd.functionSecurity.RunFunction.init(RunFunction.java:309)
at RF.jspService(_RF.java:205)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.apps.jtf.base.resources.FrameworkException: ORA-01410: invalid ROWID
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
... 37 more
Pls help in this case. I am novice in EBS.
Thanks

Hi Yoonas,
while login page shwoing error "Unable to generate forwarding URL. Exception: oracle.apps.fnd.cache.CacheException "
alert logs are fin no issue from db end all rectified. pls find the application.log.
13/02/28 18:11:58.536 html: 10.1.3.4.0 Stopped
13/03/01 10:54:24.412 10.1.3.4.0 Started
13/03/01 10:54:34.841 html: 10.1.3.4.0 Started
13/03/01 12:08:50.767 html: oracle.apps.fnd.security.LeakDetectionFilter.initialized:1362119930766
13/03/01 12:08:50.767 html: LeakSetting:
global:true,session:false,aggressive:false,stderr:false,appslog:false,corelog:false
ignoring:null
13/03/01 12:08:51.980 html: Servlet error
java.lang.ExceptionInInitializerError
at oracle.apps.fnd.sso.AppsLoginRedirect.doGet(AppsLoginRedirect.java:613)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.apps.fnd.cache.CacheException
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
at oracle.apps.fnd.functionSecurity.User.getUser(User.java:338)
at oracle.apps.fnd.functionSecurity.FunctionSecurity.getUser(FunctionSecurity.java:527)
at oracle.apps.fnd.functionSecurity.FunctionSecurity.init(FunctionSecurity.java:1620)
at oracle.apps.fnd.functionSecurity.FunctionSecurity.<init>(FunctionSecurity.java:188)
at oracle.apps.fnd.sso.SSOUtil.getLocalPwdChangeUrl(SSOUtil.java:735)
at oracle.apps.fnd.sso.SSOUtil.getLocalPwdChangeUrl(SSOUtil.java:791)
at oracle.apps.fnd.sso.SSOManager.<clinit>(SSOManager.java:2191)
... 19 more
Caused by: oracle.apps.jtf.base.resources.FrameworkException: Failure in CacheLoader: oracle.apps.jtf.base.resources.FrameworkException
at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:830)
at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802)
at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624)
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216)
... 26 more
Caused by: oracle.apps.jtf.base.resources.FrameworkException
at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:234)
at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:201)
at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:176)
at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:151)
at oracle.apps.jtf.cache.GenericCacheLoader.load(GenericCacheLoader.java:87)
at oracle.ias.cache.CacheLoader.callLoad(Unknown Source)
at oracle.ias.cache.CacheHandle.findObject(Unknown Source)
at oracle.ias.cache.CacheHandle.locateObject(Unknown Source)
at oracle.ias.cache.CacheAccess.get(Unknown Source)
at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:771)
... 29 more
Caused by: oracle.apps.jtf.base.resources.FrameworkException: ORA-01410: invalid ROWID
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
... 39 more
13/03/01 16:02:42.161 html: 10.1.3.4.0 Stopped
13/03/01 17:06:37.969 10.1.3.4.0 Started
13/03/01 17:06:47.473 html: 10.1.3.4.0 Started
13/03/01 18:00:40.903 html: 10.1.3.4.0 Stopped
13/03/01 18:12:07.664 10.1.3.4.0 Started
13/03/01 18:12:25.248 html: 10.1.3.4.0 Started
13/03/01 18:34:41.921 html: oracle.apps.fnd.security.LeakDetectionFilter.initialized:1362143081921
13/03/01 18:34:42.155 html: LeakSetting:
global:true,session:false,aggressive:false,stderr:false,appslog:false,corelog:false
ignoring:null
13/03/01 18:57:48.659 html: 10.1.3.4.0 Stopped
13/03/04 11:40:01.741 10.1.3.4.0 Started
13/03/04 11:40:23.176 html: 10.1.3.4.0 Started
13/03/04 12:09:47.660 html: oracle.apps.fnd.security.LeakDetectionFilter.initialized:1362379187660
13/03/04 12:09:47.824 html: LeakSetting:
global:true,session:false,aggressive:false,stderr:false,appslog:false,corelog:false
ignoring:null

Adogjf Unable to generate jar files under JAVA_TOP error while patching

Hi,
I'm upgrading my version of Java from 1.3.1_19 to 1.5.0_17. I downloaded the jdk-1_5_0_17-linux-i586.bin file and unpackaged it to /u0/<SID>/<SID>db/10.2.0. It unpackaged it to a new directory jdk1.5.0_17 (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17), whereas the old version is in a directory jdk (/u0/<SID>/<SID>db/10.2.0/jdk).
Having done that I had to run an interoperability patch (4372996). Upon running this patch I received an error at the end:
adogjf() Unable to generate jar files under JAVA_TOP
There were no other errors.
I think the problem has to do with where my new java version is located but I'm not sure. I'm thinking that it's still looking under the old JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk) when I want it to look under the new JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17). So, should I move the contents from the new directory (jdk1.5.0_17) to the old directory (jdk) or is there a way to 'point' it to the new JAVA_TOP.
Please let me know if I'm totally off base and there's another solution. We're currently on EBS 11.5.10.2, DB 10.2.0.4 and RHEL 4 Update 5.
Thanks,
Lia.

Here you go. Hope this helps you to help me :-). Thanks.
+
** Generating the product JAR files...
STRT_TASK: [Generate JAR files] [] [Fri Mar 27 2009 09:20:32]
STRT_TASK: [Generate JAR files under JAVA_TOP] [] [Fri Mar 27 2009 09:20:32]
Signing product JAR files in JAVA_TOP -
/u0/mary/marycomn/java
using entity Customer and certificate 1.
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
Successfully created javaVersionFile.
Generating product JAR files in JAVA_TOP -
/u0/mary/marycomn/java with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u0/mary/maryappl/admin/mary/out/genjars.cmd
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u0/mary/maryappl/ad/11.5.0/java/adjri.zip:/u0/mary/marycomn/util/jre/1.1.8/lib/rt.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/i18n.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/tools.jar:/u0/mary/marycomn/java/appsborg.zip:/u0/mary/marycomn/java/apps.zip:/u0/mary/maryora/8.0.6/forms60/java:/u0/mary/marycomn/java"
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
The JDK version is 1.1.8
Validating the files/directories specified for -areas option
Validating the files/directories specified for -outputSpec option
Validating the directory specified for -lstDir option
About to Analyze the input areas : Fri Mar 27 2009 09:20:36
WARNING: Will not load stale resource unit META-INF/services/javax.xml.parsers
WARNING: Will not load stale resource unit META-INF/services/javax.xml.transform
Done Analyzing the input areas : Fri Mar 27 2009 09:20:43
About to Analyze/Generate jar files : Fri Mar 27 2009 09:20:43
About to Analyze fndnetcharts.jar : Fri Mar 27 2009 09:20:43
Up-to-date : fndnetcharts.jar
Done Analyzing fndnetcharts.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndtdg.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndtdg.jar
Done Analyzing fndtdg.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndjgl.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndjgl.jar
Done Analyzing fndjgl.jar : Fri Mar 27 2009 09:20:45
About to Analyze fndjle.jar : Fri Mar 27 2009 09:20:45
Up-to-date : fndjle.jar
Done Analyzing fndjle.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndlrucache.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndlrucache.jar
Done Analyzing fndlrucache.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndgantt.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndgantt.jar
Done Analyzing fndgantt.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndpromise.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndpromise.jar
Done Analyzing fndpromise.jar : Fri Mar 27 2009 09:20:48
About to Analyze fndforms.jar : Fri Mar 27 2009 09:20:48
About to Generate fndforms.jar : Fri Mar 27 2009 09:20:49
Done Generating fndforms.jar : Fri Mar 27 2009 09:20:50
About to Sign fndforms.jar : Fri Mar 27 2009 09:20:50
ERROR: Javakey subcommand exited with status 1
Javakey standard output:
Adding entry: META-INF/MANIFEST.MF
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java Key Generation
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Javakey error output:
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Successfully created javaVersionFile.
Customer not found in database.
java key error:
adjava -ms128m -mx256m sun.security.provider.Main -gs /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.tmp /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.uns
The above Java program failed with error code 1.
Done Analyzing/Generating jar files : Fri Mar 27 2009 09:20:51
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Failed to generate product JAR files in JAVA_TOP -
/u0/mary/marycomn/java.
adogjf() Unable to generate jar files under JAVA_TOP
AutoPatch error:
Failed to generate the product JAR files
You should check the file
/u0/mary/maryappl/admin/mary/log/4372996.log
for errors.
+

ERR Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install

==============>deploy log information:
2015-04-27_14-50-42:INFO:Install Args AGENT_PORT=3872
2015-04-27_14-50-42:INFO:Action description 在主机 expquery03 上执行命令 /bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872'
2015-04-27_14-50-42:INFO:Attempt :1 pty required false with no inputs
2015-04-27_15-11-47:INFO:/bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872' execution failed on host expquery03
2015-04-27_15-11-47:INFO:Pattern ERROR: found in file /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log Line ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO:Error Message found Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: ACTION 在主机 expquery03 上执行命令 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872
2015-04-27_15-11-47:INFO: OUT null
2015-04-27_15-11-47:INFO: ERR Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: EXIT CODE1
2015-04-27_15-11-47:INFO:InvocationTargetException Exception
2015-04-27_15-11-47:INFO:Printing Exception :java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.executeActions(BaseDeployerOps.java:1924)
        at oracle.sysman.core.agentpush.ui.deployer.NewAgentDeployer.deploy(NewAgentDeployer.java:59)
        at oracle.sysman.core.agentpush.ui.deployfwk.DeploymentWorker.run(DeploymentWorker.java:26)
        at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:311)
Caused by: CommandException: err: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install. out: null exitcode: 1
stacktrace:
null
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1204)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1050)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:644)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:593)
        at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.doInstall(BaseDeployerOps.java:484)
oem@oragc12c bin]$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log: No such file or directory
[oem@oragc12c bin]$ more /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /u01/app/agent_12c/core/12.1.0.4.0/jdk/bin/java -classpath /u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar oracle.s
ysman.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c -prereq
Validating oms host & port with url: http://oragc12c.yto.net.cn:4903/empbs/genwallet
Validating oms host & port with url: https://oragc12c.yto.net.cn:4903/empbs/genwalletReturn status:3-oms https port is passedUnzipping the agentcoreimage.zip to /u01/app/agent_12c ....12.1.0.4.0_PluginsOneof
fs_197.zip
Executing command : /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/unzip -o /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/12.1.0.4.0_PluginsOneoffs_197.zip -d /u01/app/agent_12cExecuting command : /u01/
app/agent_12c/core/12.1.0.4.0/jdk/bin/java -d64 -classpath /u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/xmlparserv2.jar:/u01/app/agent_12c/core/12
.1.0.4.0/oui/jlib/srvm.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/emCfg.jar:/u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/share.jar oracle.sysman
.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c /u01/app/agent_12c/agent_inst AGENT_BASE_DIR=/u01/app/agent_12c
Failed to read the inventory
Failed to read the inventory=====================>but the inventory no problem
Cloning the agent home...
Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs   -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.0   AG
ENT_BASE_DIR=/u01/app/agent_12c ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=f
alse b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872 -noconfig ORACLE_HOME_NAME=agent12c1 -force b_noUpgrade=true
ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
Agent Deploy Log Location:/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
============>agent client privage and "/tmp" information at hp-unix
$ bdf
Filesystem          kbytes    used   avail %used Mounted on
/dev/vg00/lvol3    5242880 384784 4820160    7% /
/dev/vg00/lvol1    1835008 376272 1447400   21% /stand
/dev/vg00/lvol7    20971520 8977200 11902024   43% /var
/dev/vg00/lvol9    7864320 3213136 4614904   41% /usr
/dev/vg00/lvol6    85983232 63055260 21527575   75% /u01
/dev/vg00/lvol5    10485760 2268216 8153768   22% /tmp===============>
/dev/vg00/lvol8    10354688 6536024 3788952   63% /opt
/dev/vg00/lvol4    52428800 13319488 38803816   26% /home
$ ls -lt
total 6
drwxr-xr-x   2 oem        oinstall      1024 Apr 27 15:14 agent_12c
drwxrwx---   5 grid       oinstall      1024 Apr 27 15:11 oraInventory
drwxr-xr-x   3 oem        oinstall        96 Apr 22 16:16 agent
drwxrwxr-x   8 grid       oinstall      1024 Apr 21 14:58 grid
drwxrwxr-x   6 grid       oinstall        96 Aug 7 2013 oracle
drwxr-xr-x   3 root       oinstall        96 Aug 2 2013 11.2.0
$ cd oraInventory
$ ls -lt
total 44
drwxrwx---   2 grid       oinstall     16384 Apr 27 15:10 logs
drwxrwx---   3 grid       oinstall      2048 Apr 22 10:36 backup
drwxrwx---   2 grid       oinstall      1024 Apr 3 2014 ContentsXML
-rwxrwx---   1 grid       oinstall      1686 Aug 6 2013 orainstRoot.sh
-rw-rw----   1 grid       oinstall        56 Aug 6 2013 oraInst.loc
$ cd ContentsXML
$ ls
comps.xml      inventory.xml libs.xml
$ ls -lt
total 6
-rw-rw----   1 grid       oinstall       842 Apr 21 10:31 inventory.xml
-rw-rw----   1 grid       oinstall       329 Apr 20 17:32 comps.xml
-rw-rw----   1 grid       oinstall       292 Apr 20 17:32 libs.xml
I view some oms document ,don't know the case

agent client's apeloy log:
$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_16-22-23-PM.log
INFO: /u01/app/agent_12c/core/12.1.0.4.0
INFO: /u01/app/agent_12c/ADATMP_2015-04-27_15-33-29-PM
INFO: /u01/app/agent_12c
INFO: /u01/app/agent_12c/agent_inst
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: -ignorePrereqs
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: Setting the system property ORACLE_HOSTNAME to:expquery03
INFO: Setting the system property oracle.installer.oui_loc to:/u01/app/agent_12c/core/12.1.0.4.0/oui
INFO: Agent Base Directory is : /u01/app/agent_12c
INFO: Agent Home is : /u01/app/agent_12c/core/12.1.0.4.0
INFO: Sbin Home is : /u01/app/agent_12c/sbin
INFO: Logs Location is : /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy
SEVERE: User has specified -ignorePrereqs when invoking the installer. All pre-requisite checks will be ignored for this installation session. Configuration failures may result if proper pre-requisites are
not satisfied.
INFO:
Setting system property CUSTOM_INVENTORY to /u01/app/oraInventory
INFO: Clone start time:2015-04-27_16-22-24-PM
INFO: Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs   -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.
0   -noconfig ORACLE_HOME_NAME=agent12c1 -force
INFO: Starting Oracle Universal Installer...
INFO:
INFO: Checking swap space: must be greater than 500 MB.   Actual 61440 MB    Passed
INFO: Preparing to launch Oracle Universal Installer from /tmp/OraInstall2015-04-27_04-22-24PM. Please wait ...Oracle Universal Installer, Version 11.1.0.12.0 Production
INFO: Copyright (C) 1999, 2014, Oracle. All rights reserved.
INFO:
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO:   at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO:   at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO:   at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO:   at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO:   at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO:   at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: OUI-10053:Unable to generate temporary script: /tmp/orainstRoot.sh. Unable to continue install.
INFO: SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
INFO: Plugin homes:
INFO:
INFO: LD_LIBRARY_PATH environment variable :
INFO: -------------------------------------------------------
INFO: Total args: 42
INFO: Command line argument array elements ...
INFO: Arg:0:/tmp/OraInstall2015-04-27_04-22-24PM/jre/bin/java:
INFO: Arg:1:-Doracle.installer.library_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui/lib/hpia64:
INFO: Arg:2:-Doracle.installer.oui_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui:
INFO: Arg:3:-Doracle.installer.bootstrap=TRUE:
INFO: Arg:4:-Doracle.installer.startup_location=/u01/app/agent_12c/core/12.1.0.4.0/oui/bin:
INFO: Arg:5:-Doracle.installer.jre_loc=../../jre:
INFO: Arg:6:-Doracle.installer.nlsEnabled="TRUE":
INFO: Arg:7:-Doracle.installer.prereqConfigLoc= :
INFO: Arg:8:-Doracle.installer.unixVersion=B.11.31:
INFO: Arg:9:-d64:
INFO: Arg:10:-mx96m:

URGENT: Form Import FAILED with Unable to generate UI form: ORA-0650

I am importing application components from one installation of portal 3.0.9.8 to another installation. Both installed versions of POrtal are the same.
The application name is PROFILE_APP. I have created this same app with same specifications as in source, in the target portal instance.
To import, I am using the SQL scripts generated through portal using the "Export" feature available for each component.
I could successfully import LOV into this app from source to target by running the above generated SQL. When i run the SQL for the form component in the target - i get the following error :
...Importing component: ID = 5861481106 Name = WST_USER_PROFILE_V_FRM Owner = WST_PROFILE_PORTAL30_APP Type = FOT
*** ERROR ***
wwa_generate_module.transfer_fot_metadata: Unable to generate UI form: ORA-06502: PL/SQL: numeric or value error
The form worked successfully in the source instance.
Any help is greatly appreciated.
Thank you,
Tanushree.

Form CustomForm_791b1adc_97fd_4de1_a077_646a418fe59b extends form Microsoft.EnterpriseManagement.ServiceManager.ChangeManagement.Forms.ChangeRequestForm, which already has another extension (CustomForm_3e2fd77f_cfed_40f9_9def_c6735078bf2a).
you already have a form customization that extends the change request form, and this MP is also importing a different customization to the same form. each form can only have one customization.

PXI-5406: unable to generate 10 mV p-p sine wave with 1.5 V dc offset

Similar Messages

Maybe you are looking for