PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host

after formating when tryed to install software to the target this Error Shown
NI PXi 8108
The Selcted Target does not support this function
when I try to add PXi chassis this Error Shown
PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host
Help me!

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

Similar Messages

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek

For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem. How do I stop that from happening?

For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem. How do I stop that from happening? I keep having to delete my library!

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Hello. I just know the muse and I need an organization of customers in alphabetical order. The problem is that you will always get new customers. I need to know how to insert a new customer (square) and it already comes in alphabetical order on the page.

Hello.
I just know the muse and I need an organization of customers in alphabetical order. The problem is that you will always get new customers. I need to know how to insert a new customer (square) and it already comes in alphabetical order on the page. The site will be like in the link below, and each client will be a window of these: http://www.connary.com/. I look back.
A hug, Murilo.

I believe you are referring to thumbnail image rectangles as customers on page ? not exactly customer database ?
You can add rectangle with different effects with mouse rollover state and regarding adding new ones , you would need to do that manually in design mode .
Thanks,
Sanjit

TS3297 I am wanting to make a purchase from a new computer, but after I enter my id and password it says that because it is my first time purchasing from this computer I have to answer my security question, but it says my answer is incorrect and to contac

I am wanting to make a purchase from a new computer, but after I enter my id and password it says that because it is my first time purchasing from this computer I have to answer my security question, but it says my answer is incorrect and it says if you can't remember answers to the two questions to contact you

1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for support
        and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
It may say to contact Apple, but not us. We are just a user forum.

I just planned to install windows 7 on my MBP Mid-2012 using VMware Fusion,so i am bit panic about viruses and malware's affecting through vmware,is there any way to avoid from this??

i just planned to install windows 7 on my MBP Mid-2012 using VMware Fusion,so i am bit panic about viruses and malware's affecting through vmware,is there any way to avoid from this??

usamasheikh wrote:
virus protection in vmware or on my running OS X 10.8.2??plz help me out
First, you can install Microsoft's Security Essentials in the Win 7 VM and keep it up-to-date. Second, you can turn off Sharing in Fusion's System Settings to keep the VM environment separate from your Mac. Third, you can look into Sophos Anti-Virus http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/download.aspx for the Mac host.

HT1846 The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

I would buy nothing less than Windows 7 64-bit Pro.
32-bit only addresses 3.5 GB RAM ... 2012 Macminis can hold 16 GB.
64-bit Home addresses 16 GB RAM.
64-bit Pro addresses 192 GB RAM and han an XP mode.
This is all about having a good version of Windows for future use. Yu can buy "Syem Builder" version of 64-bit Pro for $140.

HT1338 My mail will not delete. When I move it to trash and then delete it within a few minutes it has all bounced back in again. Checked my preference settings and all seems to be in order. Any ideas how to resolve this frustrating problem?

My mail will not delete. When I move it to trash and then delete it, within a few minutes it has all bounced back in again. Checked my preference settings and all seems to be in order. Any ideas how to resolve this frustrating problem?

That sounds like a compatibility issue with an add-on that you have installed, as reported by a number of users in both Firefox 22 and Firefox 23 over the last couple of months. If you would provide a listing of your installed extensions ''(as you were prompted to do when creating this thread)'' maybe one of us can advise you which extension is the mot likely culprit. You will need to re-install Firefox 23 to do further diagnostic testing.
As far as the compatibility of Firefox 23 and Win XP SP3, Mozilla has verified they are compatible and not one user ''(including me on two separate PC's)'' has reported a problem with compatibility.

TS2755 I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise

This module only supports the threaded MPM,this is error,how solve?

I start startup software,appear error,as follow:
This module only supports the threaded MPM
How solve this is error,what MPM?Help me,THKS!!!!!

--with-mpm=worker,solve this error.

I want to buy music but i can't remember my security questions, It says to reset it but the link is not there to reset. It says to contact ap support but I've tried both ways to contact and it says it isn't working.

I want to buy music but i can't remember my security questions, It says to reset it but the link is not there to reset. It says to contact ap support but I've tried both ways to contact and it says it isn't working.

The reset link will only show if you have a rescue email address on your account (an alternate email address is different). If you don't have one (you won't be able to add one until you can answer your questions) then you will have to contact Support in your country to get the questions reset.
How are you trying to contact Support ? You should be able to do so via the following :
Contacting Apple about account security : Contact Apple for help with Apple ID account security
Or if your country isn't on that page then use this form : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then add a rescue email address for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID

Configure custom application properties from admin console on 10gR3

Is there a way to promote a property in an application, deploy that application EAR to weblogic server 10gR3 and configure the property from admin console?
E-g: creating two properties loggingEnabled, logLevel in an application and based on the needs configure logging from server admin console.

You have to write your own management mbean,
Examples can be found here:
- http://blogs.oracle.com/WebLogicServer/2009/10/developing_custom_mbeans_to_ma.html
- http://blogs.oracle.com/WebLogicServer/2009/11/developing_custom_mbeans_to_manage_j2ee_applications_part_ii.html
- http://blogs.oracle.com/WebLogicServer/2010/03/developing_custom_mbeans_to_ma_1.html
Good luck

When opening a web page, a blank page about the size of a third of the page appears for a sec then the full page comes up

when I open igoogle or any other website, a mini blank page (about a third of the full screen) appears for a sec then the full page complete with info appears. The blank page displays only mozilla firefox, the next full size shows the complete web site, e.g. google, yahoo, hotmail, etc. The lap top does not do this only the desk computer. This has only started recently. We did up grade our dsl speed but they ATT has assured us that the problem rests with the browser.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r22
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

I was told to uninstall then reinstall itunes because "no apple application support"so i did, now wont recognise my iphone and says to uninstall itunes and instll the 64-bit version of itunes so i did again,and again,and again.still wont work pls help me?

I was told to uninstall then reinstall itunes because "no apple application support", so i did, now it wont recognise my iphone and says to unistall+install the 64-bit version of itunes so i did, again..and again..still nothing please help me?!

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host

Similar Messages

Maybe you are looking for