Q: How can ISE 1.2 be configured to display "IP Address" in the Operations-Authentication view ?
Hi Forum !
I have several ISE installations running, and I have come across an Issue, that may or may not be a real issue.
How can ISE 1.2 and/or the WLC be configured to display "IP Address" in the Operations-Authentication view ?
I simply can not see any IP address in this field, when the dot1x Authentication is done on a WLC.
This may be "works as designed" due to the fact that dot1x runs before the IP is assigned, but then again I do get profiler date etc, and hence I would expect the IP to be displayed.
Please see attachment for clarification of the field in the ISE dashboard.
FYI
I do see IP in WIRED dot1x senarios, but then again I run LowImpact modes, as opposed to CloseMode in the WiFi senarios
I have the same ono WLC OS 7.0, aswell as on 7.5 & 7.6 (i.e. no IP address shown in dashboard)
Have Fun !
Regards
Martin
I have seen this before but never really bothered to look more into it. It has always showed for wired but not wireless. I did some digging and it appears that the "framed-ip-address" is being sent/honored by the NAS in the "access-accept" packet.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_0101001.html#ID676
Why is it not showing in ISE's screen is now another quesiton. I would say a bug but I recall this since the 1.0 days and I have done several deployments. Perhaps Cisco can chime in here or if you can open a TAC case and report back your findings :)
Thank you for rating helpful posts!
Similar Messages
-
How can I get my instructional text to display when I open the pdf?
I have some fields which I have set up which have help/instructions for completing the information required. This is a questionnaire. When I save it as a pdf, the instsructional text does not display. I would really appreciate if someone can tell me how to fix this.
Thanks for taking the time to respond to my query. The text does not display when I hover my mouse over it.
cheers Deborah Frow
From: Ajlan huda <[email protected]>
To: Deborah Frow <[email protected]>
Sent: Monday, 12 January 2015, 5:24
Subject: Reply marked as helpful on How can I get my instructional text to display when I open the pdf?
|
How can I get my instructional text to display when I open the pdf?
Ajlan huda marked SumitV's reply on How can I get my instructional text to display when I open the pdf? as helpful. View the full replyMarked as helpful:Hi Pacific Immigration, In Adobe Acrobat/ Adobe Reader there is no “?” shown for help, but if you mouse over the field for 1-2 seconds the Help text is shown.
Following How can I get my instructional text to display when I open the pdf? in these streams: Inbox
| -
I just downloaded OSX Maverick and now I cannot drag addresses from my contacts to the "To" box when sending email. How can I get back to dragging groups or individual contacts to emails?
Starting to type a name and getting a list of matches is good but it's not a substitute for being able to choose twenty or thirty names from your address book and dragging them into the "To" field. Of course many contacts can be put into a group but I may want to send occasional emails to many people who don't fit any group, and there may be no need to create a group just for that email.
If you agree please send an email to apple feedback for Maverick OS X. -
I can connect my MacBook to my TV via HDMI and when I FaceTime everything works normally except I would like the display for the MacBook to be turned off so I can see video only on my TV. Closing the lid is not an option since I am using the MacBook's camera to FaceTime. Is there any way to achieve this?
Shivneet wrote: ... I would like the display for the MacBook to be turned off so I can see video only on my TV. ... Is there any way to achieve this?
Not that I could find.
The easiest workaround that I could find is a trimmed piece of Black Construction Paper taped over the Mac's display.
Alternatively, you could use an external Mac Compatible Web Cameras and then close the lid, but that is a higher cost option.
Message was edited by: EZ Jim
Mac OSX 10.8.4 -
How can i print a network configuration page , i need the IP on a ph1510
how can i print a network configuration page , i need the IP on a ph1510
Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?
How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?
If you want to use JMS with AQ as datastore then there is some configuration you need to do to enable this. This is outside SOA Suite per sa, e.g. no adapter required.
If you want to connect to the AQ direct then use the AQ adapter.
this blog may be of some help understand the configuration
http://biemond.blogspot.com/2008/01/oracle-jms-with-esb-and-bpel.html
cheers
James -
How can delayed delivery update be configured for Inbound delivery ?
Hi All,
How can delayed delivery update be configured for Inbound delivery ?
There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
Regards
JimmiHello Jimmi,
Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
664316 Tips for the delayed delivery update for TO
I hope this information helps!
Martin -
How can an ADF Tree be configured to work with varying levels of heirarchy?
We have a need for a Locations tree that represents the Locations heirarchy for any one of our clients. Depending on the client the number of levels in a location heirarchy could range from 1 to 9.
I have created 9 different tree bindings and I can change the tree binding in the jsp page - the example below is for a client with 4 location levels.
<af:tree value="#{bindings.ScdLocs4View1.treeModel}" var="node"
binding="#{backing_locations.tree2}" id="tree2">
For a client with 5 location levels, I'd like to programatically change the value to
#{bindings.ScdLocs5View1.treeModel. How can I do this?
I was thinking I could use the setValue method on the tree control in my page's backing bean. But I have been unable to get a reference to the tree binding.
I don't see an appropriate method for finding a Tree Binding. There are methods for finding an Iterator Binding, an Executable Binding, or a Region Binding (whatever that is). But how do I "find" a reference to a Tree Binding?
I have also given consideration to using a single Tree Binding with 9 levels (or rules in the Tree Binding Editor) and finding a way to programatically "start" the rendering at a particular level (or rule) - in effect telling the ADF Tree control to ignore some number of rules and begin with the specified rule. But I haven't been able to figure out how to do this either.
Help would be greatly appreciated.Bill,
A tree binding is a particular kind of control binding, so you can find it as a control binding and then cast it to the more specific interface to work with it. -
HT1338 Hi How can i reinstall OS Mavericks to make my laptop run like the first time?
Hi,How can i reinstall OS Mavericks to make my laptop run like the first time?
Hardware Information:
MacBook Pro (17-inch, Early 2011)
MacBook Pro - model: MacBookPro8,3
1 2.2 GHz Intel Core i7 CPU: 4 cores
6 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:59:22
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (407.34 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
PIXART USB OPTICAL MOUSE
Western Digital External HDD 500.11 GB
EFI (disk1s1) <not mounted>: 209.7 MB
WD-KENKEN (disk1s2) <not mounted>: 499.76 GB
Apple Computer, Inc. IR Receiver
FireWire Information:
Iomega eGo HDD 800mbit - 800mbit max
disk2s1 (disk2s1) <not mounted>: 262 KB
Iomega_HDD (disk2s2) <not mounted>: 1 TB
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
at.obdev.nke.LittleSnitch (4050 - SDK 10.8)
Launch Daemons:
[System] at.obdev.littlesnitchd.plist 3rd-Party support link
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.blackmagic-design.desktopvideo.XPCService.plist 3rd-Party support link
[System] com.blackmagic-design.DesktopVideoHelper.plist 3rd-Party support link
[System] com.blackmagic-design.streaming.BMDStreamingServer.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.noiseindustries.FxFactory.FxPlug.plist 3rd-Party support link
Launch Agents:
[System] at.obdev.LittleSnitchUIAgent.plist 3rd-Party support link
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
RealPlayer Downloader Agent
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.44 - SDK 10.6 Outdated! Update
AdobePDFViewer: Version: 10.1.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Safari Extensions:
Slick Savings: Version: 1.0
Searchme: Version: 1.3
Amazon Shopping Assistant: Version: 1.1
Ebay Shopping Assistant: Version: 1.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
RealPlayer Plugin: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
Blackmagic Desktop Video 3rd-Party support link
Flash Player 3rd-Party support link
Tuxera NTFS 3rd-Party support link
Old Applications:
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
SA Color Finesse 3 UI: Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
/Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
dynamiclinkmediaserver: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
8% storeagent
4% WindowServer
1% EtreCheck
1% PluginProcess
1% RealPlayer Downloader Agent
Top Processes by Memory:
227 MB Safari
104 MB com.apple.IconServicesAgent
104 MB Messages
98 MB mds_stores
80 MB Dropbox
Virtual Memory Information:
2.62 GB Free RAM
2.06 GB Active RAM
182 MB Inactive RAM
1.13 GB Wired RAM
338 MB Page-ins
0 B Page-outs -
How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.https://www.google.com/calendar/iphoneselect
-
How can i print just one page of photo book without printing the entire book
how can i print just one page of photo book without printing the entire book
Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits: -
adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html -
how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?
Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank -
How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
I tried to use the attached command through TERMINAL :
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
Use -help for a list of options.
But i didn't work as I got the above error message.
best regards
JeroenI'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them! -
TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?
How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com
Maybe you are looking for
-
List of PO's created with reference to WBS element
Dear Experts, I am looking for all the PO's that are created with reference to a WBS element, Can you please suggest a T-code? Thanks & Regards, Manish
-
IDoc_inptut_ordchg order item
Hi Gurus how can i pass from xi item number of sales order. if i try to pass the value on e1edp01-posex the system is searching for the POitem,not for the item from salesorder. is there any possibilty to access with the right key? thanks Ralph
-
Interpreting 10053 trace output
Hi, I am trying to analyze one sql performance issue. In 10053 trace of the SQL, one analyzed index(IDX_OCI_INSTRMNT_ID) is reflected as Unanalyzed: BASE STATISTICAL INFORMATION Table Stats:: Table: OCI Alias: OCI (Using composite stats) #Row
-
Can I change Bridge CC default editor to photoshop elements 13?
In Bridge CC, can I change default editor to photoshop elements 13? Or at least list it as an external editor?
-
Since June 11, 2010, YouTube stopped playing videos. I uninstalled both Adobe Flashplayer 10 plugin and Adobe Shockwave Player 11.5., in IE 8, I have theAllow Active content to run files on My Computer checked, Download signed Active X controls is on