QA32 UD - Disable screen fields UD code and Quality score in QA12 screen

Hi,
This is regarding the QM module , QA32 transaction , UD subscreen under Characteristics tab.
I need to disable the UD Code and Quality score  screen field in QA12  in cases where the inspection lot  stocks are completly posted.
How can I achieve this? Can some one plz suggest me the relevant User exit for this ?
Also how do i disable the screen field in QA12 ?
Regards,
P.S.Chitra

Hi,
Did u get any solution ???
Regards
Bharath

Similar Messages

  • While running FBL5N (Business area wise) customer code and customer names a

    Hi Gurus,
    While running FBL5N (Business area wise) customer code and customer names are not appearing.

    Hi Raju,
    Please click on the change layout screen button on the screen of FBLN5N report. then select the fields customer code and customer name from the right hand side table and drag it to left hand side table.
    After that run the report again. it will appear. please assign points.
    Rgds
    Manish

  • My iPad conveys that it is disabled, and that I need to connect to iTunes.  When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password.  How do I fix this?

    My iPad conveys that it is disabled, and that I need to connect to iTunes.  When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password.  How do I fix this?

    You will need to restore it. It may not sync, but the iPad's sidebar has to appear you can restore it and it will be as the last time ou synced it to iTunes. For more info:
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • Disabling the field 'Bill-to party' in sales order screen

    Hi friends,
    I need to disable following fields in the partner functions tab of sales order ,while creating/changing a sales order,since they will be automatically populated and user should not be able to modify.
    1.Bill-to party.
    2.Payer.
    I have tried with user exit MV45AFZZ,but program control is not coming there regarding PARTNERS tab,for diabling the screen.
    Can you give me some hints like,any other EXIT or BADI exists for writing the code for this?
    Thanks & Regards
    Seshagiri.

    Hi,
    Your requirement is to identify the bill to based on ship to. if so do the following.
    maintain the partner tab in ship to master record, here you assign the bill to party to whom you have to send the bill.
    Now in partner determination procedure maintain the bill to source as ship to. In partner determination procedure you have all the options from where system has to look for the other partner functions.
    In this processes system first checks with Sold to, finds out a ship to, now from ship to partner tab it automatically finds out the bill to in to the sales order.
    Hope you understood, if not let me know.
    Reward if it helps you.
    Venkat Cheedalla

  • Tax Code and Tax Amount Fields are not appearing

    Hi to all,
    While making Downpayment Request (F-47) Tax Code and Tax Amount Fields are not appearing in the screen.
    for more clarity...
    suppose PO is 1150 include all taxes ( Amount 1000+ Tax Amount 150)
    as per agreement with vendor we need to raise DR for 1150 and based on DR we will make downpayment to vendor (F-48)
    But in F-47 screen Tax Code and Tax Amount fields are not appearing.
    Could any body help me on this??
    Thanks in Advance
    Regards,
    Schilukuri

    why you are looking for tax code field, pay gross amount as per PO, same amount will update in PO history as well as Vendor account.
    Even if you find the tax code field and check the tax code check box, system will not calculate tax  at the time of down payment or down payment request.
    Please remember that by default standard SAP provides the tax code field in f-47 or F-48.

  • Disabling certain fields on the selection screen.

    Hi all,
              I want to disable certain fields on selection screen of my program, also i want to display certain fields on selection screen only if a particular field on the selection screen is checked or selected. Please guide me how this can be achieved via coding in a program.
    Thanks & regards,
    Chetan.

    Hi Chetan,
    try this.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
    pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
    pa_vkorg TYPE vbak-vkorg MODIF ID abc.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
    SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
    s_date FOR gs_lfa1-erdat MODIF ID def,
    s_augru FOR gs_vbak-augru MODIF ID def,
    s_vbeln FOR gs_vbak-vbeln MODIF ID def.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
    SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
    SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK b3.
    IF pa_rep EQ gc_x.
    LOOP AT SCREEN.
    IF screen-group1 = gc_abc.
    screen-input = gc_zero_num.
    ELSEIF screen-group1 = gc_def.
    screen-active = gc_one_num.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    ELSEIF pa_upd EQ gc_x.
    *For Reprocessing
    LOOP AT SCREEN.
    IF screen-group1 = gc_def.
    screen-input = gc_zero_num.
    ELSEIF screen-group1 = gc_abc.
    screen-active = gc_one_num.
    ENDIF.
    MODIFY SCREEN.
    CLEAR pa_upd.
    ENDLOOP.
    ENDIF.
    REPORT zrich_001.
    PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
    user-command chk,
    p_rad2 RADIOBUTTON GROUP grp1.
    SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
    s_datum2 FOR sy-datum MODIF ID d2.
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT SCREEN.
    IF p_rad1 = 'X'
    AND screen-group1 = 'D2'.
    screen-active = '0'.
    ENDIF.
    IF p_rad2 = 'X'
    AND screen-group1 = 'D1'.
    screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    reward if useful.
    regards,
    sravanthi.

  • Adding new field in va01 and va02 t-code.

    hello all,
    here in sales order creation t-code and change order t-code's header information in shipping tab all fields coming regarding total waight and total volume and net waight but there is no field of total quantity and intersting thing is this its not coming in whole t-code anywhere.
    so friends i want to add this field.
    so which method should be followed for doing this.
    thanks and regards amit.

    Hi,
          Refer
    https://forums.sdn.sap.com/click.jspa?searchID=4998349&messageID=3132651
    Please check this
    http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
    The SAPMV45A , 8309 screen is the Additional Data B tab to add your custom fields . To capture the data from this custon field you can use
    the user exit MV45AFZZ, USEREXIT_SAVE_DOCUMENT_PREPARE OR
    USEREXIT_SAVE_DOCUMENT depening on your functionality
    Regards

  • Disable a field in SRM 4.0 BSP Code

    Hi All,
    there is a date range in Process Puyrchase Order --> Process Item screen named as Service Period (Confirmed) under Service Timeframe. I clicked on the page and viewed the HTML code. There field name is order.item.edit_pco_model_pt_item_timeframe[2].vper_start. Now can you tell me how to locate this field in BSP code. Currently this field is editable and we want to make it uneditable. BADI BBP_UI_CONTROL_BADI doesn't have any method for PO fields control.
    Please help.
    Thanks
    Prachi

    Hello Siddarth,
    Try with screen variant ( SHD0 transaction).
    Regards.
    Laurent.

  • Disable a field at Item level for SC confirmation Screen

    Dear All ,
    PLEase help me with a step by step instruction on how to disable field at Item level of  confirmation screen of SC .
    I tried in Webdynpro component : Web Dynpro Component:/SAPSRM/WDC_DODC_CONF_IBD in se80 and below is what I get ;
    When I click on Display it asks me for an access key which I dont have ..
    When I click on the enhancement option it asked me to create an implemenation which I did as seen in yellow below and still the enabled field is not getting editable so tha I can uncheck and make the field dissapper .
    Please can some one really help me in understanding what exactly I am doing wrong ?
    Also  Please let me know if the SPRO path related in this to be able to do in any which way ... I tried expanding
    Configure field control .. and it doesnt expand so dont know which other option to use ..
    Thanks for your help in advance .
    Kindly let me know !!
    Regards
    Vinita

    HI Laurent .
    1. Thanks for your input . I wasnt able to open the SPRO path coz I was using SAP 720 and when I installed 730 I was able to use it .
    2. I am still not able to udnerstand how to configure it through Meta data .. What does Final_Entry mean .. I want to disable the field Last del indicator and its flag box and the label as well ..
    3. I tried through component configuration and it worked ..as below :
    I went to the webdynpro component and started the component configiurator :
    Here I made both the field and Label insisible and was able to do this .
    Please can some one help ,me know how to configire this through Meta data concept as well .. I wanted to try that method as well for my understanding ..
    Would appreciate your help and would be closing this post soon ..

  • Disabling Screen field

    Hi,
    I have a program where i have designed the selection screen. This program is used by different programs.
    My requirement now is i have to add a new field and disable another field if the new field has any value and viceversa.
    I cannot go and directly add a new field and disable the old field on the properties of that screen in se51. Since the same screen is used by different programs.
    Now if I copy the selection screen program and use it exclusively for my new report, it will take huge number of changes and there are many programs involved in calling this selection screen program. So then I'll have to copy most of the programs and change their corresponding program names as well and I have to add these new program names wherever the old one is used, which doesn't look like a good idea to me.
    i am thinking of making a copy of the report program alone and use a select option over there to add a new field. But the old field has been designed on the se51 window. Can anyone tell me what i have to do in the report program to disable the old one if new one has some value and vice versa.
    Regards,
    Phyrose.

    Hi ,
    Try this.
    At selection-screen output.
      LOOP AT SCREEN.
        IF screen-name = 'Field name to be disabled'.
          screen-input = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    Hope this solves your problem.
    Regards,
    Bharat.
    Reward points if helpful.

  • To disable one field of standard sap screen.

    Hi,
    I want to disable one field of standard SAP screen for example
    tran code : MD61
    Field : Version.
    Can Anybody suggest me with simple coding.
    thanks
    naresh

    Naresh,
    I guess this can be done using Transaction Variant SHD0.
    Just try to check the links related to transaction variant.
    1.go to SHD0
    2.give the transaction as MD61     
    3.Transacation variant as zmd61
    4.now press create button
    4.Here you will get to see the initial screen on MD61
    5.Press enter
    6.You will get to see the field attributes in a screen called 'Confirm Screen entries"
    7.There you can make a field as required/invisible/ouputonly.
    Do check other links available in SDN for more info.
    K.Kiran.

  • Adding new field in PO and PR screen

    Dear Friends,
    Kindly sugest the solution to add new custom field to PR and PO screen at item level in SOURCE OF SUPPLY TAB.
    regards
    Vishal

    Hi,
    Check the exit MEREQ001 for PR & MM06E005 for PO.
    Hope the above helps.
    Regards,
    Vivek

  • My ipod is disabled i put it in recovery mode pluged it in itunes and it keep cutting off and going to the disabled screen what do i do

    my ipod is disabled i put it in recovery and hooked it up to itunes and pushed restore it would start downloading then after a while it cuts off and goes to the disabled screen what do i do to fix this i cant put my password in cause it wont let me
    P.S. i really need help my mom is getting really mad that i cant fix it

    Try placing in DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I am unable to redeem my purchase of a Photoshop Elements 12 software license.  After entering the redemption code and clicking on the Redeem button, nothing happens.  No error message.  Screen does not change.

    I am unable to redeem my purchase of a Photoshop Elements 12 software license.  After entering the redemption code and clicking on the Redeem button, nothing happens.  No error message.  Screen does not change.

    try using a different browser, or contact support Contact Customer Care

  • My iPad conveys that it is disable, and that I need to connect to iTunes.  When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the number board to open with a password.  How do I fix this?

    My iPad conveys that it is disabled, and that I need to connect to iTunes.  When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the scree with the number board to open with a password.  How do I fix this?

    You will need to restore it. The sidebar of your iPad appears on itunes even if you dont enter the passcode. There's the option to restore it. More info:
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

Maybe you are looking for