QAAWS is not triggered if multiple QAAWS are used

Hi, I have 2 scenarios where I created a tab set dashboard, eg.Tab1 & Tab2.
Scenario 1:
Tab1 -> has a list box and a chart, each one is using QAAWS connection. List box is refreshed on load. Data in chart should be refreshed on trigger when value changes on cell (inserted by list box)
Tab2 -> same as above.
Issue: When I preview the dashboard, only tab 1 is working fine. In Tab 2, List box shows the data, but nothing is displayed in the chart.
What went wrong in my dashboard? Can multiple QAAWS refresh on load?
Scenario 2:
Tab1 -> has a list box and a chart, each one is using QAAWS connection. List box is refreshed on load. Data in chart should be refreshed on trigger when value changes on cell (inserted by list box)
Tab2 -> has 2 charts where first one has drill down enabled to reflect the data in 2nd chart, both are using QAAWS.
Issue: Tab1 list box displayed the data, but chart is empty.
          Tab2 : 1st chart displays the data, but drill down data is not displayed in the 2nd chart.
          When I selected the other value in the list box of tab 1, chart is refreshed with data display. At the same time, the detail chart in tab 2 is displaying the data as well.
   Is anyone has clue on this?
Please help me.. Thank you very much!
System version: SAP BI 7.0, BO XI 3.0, Xcelsius 2008 SP3
Edited by: GT Teow on May 29, 2009 6:38 AM

Hi,
Not quite sure what you mean.
Try reading this [whitepaper|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502f3f56-f17d-2b10-a5bf-a85f12a9c30a], if you use a Connection Refresh button with Refresh on Load instead of the QaaWS connector Refresh on Load you might find that the 2nd query triggers on startup as well.
Regards,
Matt

Similar Messages

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

We are trying to determine why alert boxes are not modal
The fix states it's for Firefox 2.0 - 3.7a1pre
We are using 3.0.6 not the current version of 3.6.13.
Add-on release notes 2.16.1
https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
with respect to the window/dialog that issued the alert.

Slideshow not resuming after certain buttons are used?

Hello,
I have this slideshow that I'm so close to having completed, but there's one issue I'm having with it not resuming after certain buttons are used. I've tried to figure out what could be causing this but I just can't see what it could be. I feel I'm so very close to having this completed if it weren't for this one issue.
In the slideshow buttons '1' and '2' work perfectly, however buttons '3' to '6' are not working completely as they should. During the slideshow, as it plays through the slides if you click on button '1' or '2' you are taken to the corresponding slide and then the slideshow automatically resumes, which is correct. However, if you click on any of buttons '3' to '6' you are still taken to the corresponding slide, but the slideshow does not resume and stays on that particular slide. I've looked over the Action Script 3 code several times and I just don't see what could be causing this but I'm not too experienced so there could be some error, no matter how minor, that I am missing.
I've attached the file and if anyone has any advice at all or can help in any way I would REALLY appreciate it!
Thank you,
William

In looking at the post I just made just now, I notice my attachment didn't come through. I'm not sure why this happened, but here is the code I'm using for the buttons:
btn1.addEventListener(MouseEvent.CLICK, btn1ClickHandler);
function btn1ClickHandler(event:MouseEvent):void
    gotoAndStop(10);
play();
btn2.addEventListener(MouseEvent.CLICK, btn2ClickHandler);
function btn2ClickHandler(event:MouseEvent):void
    gotoAndStop(55);
play();
btn3.addEventListener(MouseEvent.CLICK, btn3ClickHandler);
function btn3ClickHandler(event:MouseEvent):void
    gotoAndStop(105);
play();
btn4.addEventListener(MouseEvent.CLICK, btn4ClickHandler);
function btn4ClickHandler(event:MouseEvent):void
    gotoAndStop(150);
play();
btn5.addEventListener(MouseEvent.CLICK, btn5ClickHandler);
function btn5ClickHandler(event:MouseEvent):void
    gotoAndStop(210);
play();
btn6.addEventListener(MouseEvent.CLICK, btn6ClickHandler);
function btn6ClickHandler(event:MouseEvent):void
    gotoAndStop(259);
play();
And here is the code I'm using for slide images:
link_1.addEventListener(MouseEvent.CLICK, link_1ClickHandler);
function link_1ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=gifts%20worth%20givin g%20can&pricing=cad"));
link_2.addEventListener(MouseEvent.CLICK, link_2ClickHandler);
function link_2ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CU7323&pricing=CAD"));
link_3.addEventListener(MouseEvent.CLICK, link_3ClickHandler);
function link_3ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7292&pricing=CAD"));
link_4.addEventListener(MouseEvent.CLICK, link_4ClickHandler);
function link_4ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.apple.com"));
link_5.addEventListener(MouseEvent.CLICK, link_5ClickHandler);
function link_5ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7306&pricing=CAD"));
link_6.addEventListener(MouseEvent.CLICK, link_6ClickHandler);
function link_6ClickHandler(event:MouseEvent):void
    navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=shocking%20deals%20-% 20cl&pricing=cad"));

Error while posting Customer with Multiple sales areas using DEBMAS05.

Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.

I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat

BC4J View not Thread safe, user sessions are using the same view instance

Hi There,
We are using BC4J that came with JDeveloper 10.1.2.0.0 with Oracle 10G 10.1.2.0.0.
I have an BC4J account search view (BC4J AccountSearchView) that users can call to search for an account. So this view could be used by numerous users and pieces of code at the same time. Now my understanding is that each user gets their own instance of the view so changing the view's query should not be an issue (since the view definition is not changing). Under a light load the account search view looks like everyone get there own instance of the view and there expected account search results. But under a heavy user load when we have User A and User B the search query that was for User A will be used by User B. So the user results for one user will get the other users results.
I do not understand if the view definition is been changed by the other user and is impacting all view instances. How can this occur if it is thread safe?
I have enclosed the core code for this search.
If you can help that would be much appreciated, thanks in advance,
Nigel
accountSearchView.setQuery(baseSelectQuery+generateWhereClause());
logger.debug("SearchAccounts Query: "+accountSearchView.getQuery());
System.out.println("SearchAccounts SQL: "+accountSearchView.getQuery());
accountSearchView.setPassivationEnabled(false);
accountSearchView.setForwardOnly(true);
accountSearchView.executeQuery();
get attributes for each row result and place in new Java bean objects and return to user.

Nigel, we've only certified JDeveloper 10.1.2 against the Struts 1.1 with which it ships.
If there have been any changes in Struts 1.2 to the Struts Request Processor, then this could easily have an impact on the BC4JRequestProcessor's correct functioning, depending on what the changes were.
My quick look into the issue tells me that the ActionServlet init parameter named mapping in web.xml that we use for the 9.0.3-style BC4J/Struts integration is getting ignored by Struts 1.2. This parameter is used by Struts 1.1 to globally configure a custom ActionMapping subclass which can support additional properties. My quick test shows me that Struts 1.2 is ignoring this setting and so the oracle.jbo.html.struts11.BC4JActionMapping subclass of Struts's default ActionMapping is not getting used correctly as it does in Struts 1.1. This leads to errors when Struts tries to configure its actions in struts-config.xml since the Apache digester tries to set properties on the ActionMapping instance that don't exist (since the BC4JActionMapping has these properties, and it's not being used).
<servlet>
 <servlet-name>action</servlet-name>
 <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
 <init-param>
 <param-name>mapping</param-name>
 <param-value>oracle.jbo.html.struts11.BC4JActionMapping</param-value>
 </init-param>
</servlet>This is my quick analysis of what's not out-of-the-box compatible. I don't know enough about the changes in Struts 1.2 to know why this Struts 1.1 feature broke in Struts 1.2, or what the Struts 1.2 way to accomplish the same thing is.
I'd encourage you to use Worldwide Support's Metalink site and open a TAR for any time-critical issues you need assistance in resolving. Many of us are constantly traveling and only able to sporadically chime in with tips in the forum as our time permits.
The source of the BC4JRequestProcessor ships with the produce in the ./BC4J/src directory inside the bc4jstrutssrc.zip file.

Cisco IronPort Plug-In 7.3 breaks when multiple profiles are used?

In our testing of the Cisco IronPort Plug-In 7.3 we found that if seperate Outlook profiles are used that are configured to different e-mail accounts the plug-in gives an error.
Here's the scenario.
Profile A configured with [email protected] up and running receives the BCS Configuratoin File and the plug-in recognizes it and enables the ENCRYPT button.   User1 can use Outlook along with ENCRYPT and all works well.
But, if that same workstation users opens a different Outlook mail profile is opened that is configured to a different e-mail account. Profile B configured with [email protected] the following error is generated: "An error occurred during C:\ProgramData\Cisco\Cisco IronPort Email Security Plug-in\user1\config_2.xml configuartion file initialization. Some settings have been set to the default values."   Outlook works fine, the decrypt button is greyed out, which is expected, [email protected] is not ENCRYPT enabled.
The problem is when the user opens up Profile A again, a different error occurs "
"An error occurred during C:\ProgramData\Cisco\Cisco IronPort Email Security Plug-in\user1\config_1.xml configuartion file initialization. Some settings have been set to the default values." and the ENCRYPT button is still disabled, even though this user is authorized for ENCRYPTION.   At this point the user has to open the BCS Configuration File again, which does give the message 'This message contains a secure attachment with settings for [email protected] Do you want to apply these settings?".   If they answer YES, the ENCRYPT button is re-enabled.
Is Cisco aware of this?   What is the resolution?
Thanks.

Same workstation AD login that has full access to both e-mail accounts.
Email account A profile A is the same as the workstation login used.   Email account B profile B is a different e-mail address / AD object but user A has full access to the mailbox.
I would expect Encryption to work for Profile A and not for Profile B, e-mail address B was never sent the configuration file. But when I go back to use Profile A, encryption is no longer enabled, requireing me to run the configuration again.

User_command is not triggering in Multiple ALV_LIST_DISPLAY

Hi,
My requirement is to display multiple alv list into a single continuous list. (Like In a page there might be multiple lists)
I have to display the report like below example.
Example: In a header table there are multiple header information say,
Office | Supplier | Purchase order | Storage Location | Warehouse .
W001 | S001    | P0001                   | ws01                      | f06
W001 | S001    | P0002                   | ws01                      | f06
W001 | S001    | P0003                   | ws01                      | f06
Fora above header information there will be detail report:
Example:
Header
Office | Supplier | Purchase order | Storage Location | Warehouse .
W001 | S001    | P0001                   | ws01                      | f06
Detail report:
Process type     | Order number     | Start date     | End date | Quantity ordered
Z001               | 3000000116            | 8/15/2011     | 9/30/2011| 0.005
Z001               |3000000120            |8/29/2011      |9/16/2011 | 0.015
Z002               |3000000117            |8/16/2011      |9/5/2011 | 0.030
Similarly:
Header
Office | Supplier | Purchase order | Storage Location | Warehouse .
W001 | S001    | P0002                   | ws01                      | f06
Detail report:
Process type     | Order number      | Start date             | End date | Quantity ordered
Z001               | 3000000119            |8/15/2011             |9/30/2011 | 0.005
Z001               |3000000121            |8/29/2011      |9/16/2011 | 0.015
Z002               |3000000130            |8/16/2011      |9/5/2011   | 0.030
etc.
I have displayed it into a single list by calling, REUSE_ALV_LIST_LAYOUT_INFO_GET & REUSE_ALV_LIST_DISPLAY within a loop . For that I have to build the layout by giving
layout-list_append = 'X'.
I have done hot spot in order number. (To display a report based on order number)
I have called the user_command. also.
Now my problem is that when I'm clicking on order number it is not executing the user_command. (Nothing is happening) , even if you put /H it is not going to debugging mode. The message is "Please chose valid function".
My assumption is that due to multiple list display SAP can't identifying the particular list. I though If i pass the PF_STATUS it will solve the problem but not working.
If I display it without LIST_APPEND ( It is displaying in different page) then USER_COMMAND is working.
I have tried with REUSE_ALV_GRID_LAYOUT_INFO_GET & REUSE_ALV_GRID_DISPLAY but here I can't display multiple grid into a List but if I click on Order_Number it is displaying the report ie. USER_COMMAND is executing.
Can anybody help me in this so that either I can execute USER_COMMAND by clicking on Order Number in the List display..
Or I can display multiple grid into a list . Please don't hesitate to ask me if you required any information.
Thanks in advance,
Abhijit

Hi Sandra,
I have tried with I_callback_pf_status as well as pass the form name of pf_status in Events table also. But nothing take me to the User_command. Is there any restriction with User_command execution if layout-List_append = 'X' ?
Now what will be the solution?
Thanks,
Abhijit

Tint2 does not appear when multiple monitors are enabled

So I have this weird problem I can't seem to fix. Tint2 works perfectly absolutely perfectly when I have a single monitor enabled. However I have a second monitor which is tilted in portrait mode, so my main monitor has a resolution of 1920x1080 and the other 900x1400 (since its in portrait mode). When I disable the portrait monitor tint2 is fine, but when I turn it on in Nvidia X server settings tint2 disappears! But its still there since I can click to where the bar should be and I can see my windows coming into focus and others out of focus. I have a GTX 660 with nvidia driver package installed. I know this is a really weird problem. Hopefully one of you have had experience with this, thanks.

jedijimi wrote:Have you tried the 'tint2conf'??
Hmmm that didn't work either. This the output of me starting tint2 in terminal. And my tint2rc and tint2confrc as well.
tint2 &
real transparency on... depth: 32
xRandr: Found crtc's: 4
xRandr: Linking output HDMI-0 with crtc 0
xRandr: Linking output DVI-D-0 with crtc 1
tint2 : nb monitor 3, nb monitor used 3, nb desktop 4
icon with depth: 32
tint2 : not icon_swallow
icon with depth: 32
tint2 : not icon_swallow
icon with depth: 32
tint2 : not icon_swallow
icon with depth: 32
tint2 : not icon_swallow
//file tint2rc
# Tint2 config file by Kexolino
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #2D2D2D 100
border_color = #484848 100
# ID 2
rounded = 0
border_width = 0
background_color = #D64937 100
border_color = #000000 100
# Panel
panel_monitor = all
panel_position = bottom center horizontal
panel_size = 100% 31
panel_margin = -2 -1
panel_padding = 0 0 10
panel_dock = 0
wm_menu = 1
panel_layer = normal
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.2
autohide_hide_timeout = 1
autohide_height = 0
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 0 0 10
taskbar_background_id = 0
taskbar_active_background_id = 0
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 1
task_centered = 0
task_maximum_size = 200 32
task_padding = 10 4
task_background_id = 0
task_active_background_id = 2
task_urgent_background_id = 0
task_iconified_background_id = 0
# Task Icons
task_icon_asb = 100 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 100 0 0
# Fonts
task_font = Droid Sans 9
task_font_color = #dcdcdc 100
task_active_font_color = #FFFFFF 100
task_urgent_font_color = #FFFFFF 100
task_iconified_font_color = #dcdcdc 80
font_shadow = 0
# System Tray
systray = 1
systray_padding = 0 6 15
systray_sort = left2right
systray_background_id = 0
systray_icon_size = 16
systray_icon_asb = 100 0 0
# Clock
time1_format = %H:%M
time1_font = Droid Sans 9
clock_font_color = #FFFFFF 100
clock_tooltip =
clock_padding = 10 6
clock_background_id = 2
clock_lclick_command = gsimplecal
time1_timezone =
time2_timezone =
clock_tooltip_timezone =
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 2
tooltip_font = Droid Sans 9
tooltip_font_color = #FFFFFF 100
# Mouse
mouse_middle = none
mouse_right = close
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 0
battery_low_status = 20
battery_low_cmd = notify-send "battery low"
battery_hide = 96
bat1_font = Liberation Mono 8
bat2_font = Liberation Mono 8
battery_font_color = #B5B5B5 100
battery_padding = 2 0
battery_background_id = 0
# End of config
//tint2confrc
# TINT2CONF CONFIG FILE
default_theme = /home/ansm/.config/tint2/tint2rc
cmd_property = python2 /usr/bin/tintwizard.py
width = 500
height = 350

I keep trying to download a well known Matrix screen saver for mac, but it continuously says "Cannot install MatrixGL screen saver". Why is that when multiple people are using it?

I don't know how to get this scrren saver to work. Many people have used it and said it was good and dependant. But im not sure why It keeps saying on the "Setting" Screen Cannot install? Someone Please give me a helping hand, would really appreicate it.

Matrix Reloaded GL is a dinosaur software wise. Many many people report it is NOT compatible on Mountain Lion. Select a different screensaver, Matrix screensaver is not reliable or wont work at all on Mountain Lion OSX
** I found an update for you that claims that this patch now makes it work on mountain Lion, I havent tested it , but here it is:
https://github.com/lpar/RedPill/downloads

Get-csRgsWorkFlow command does not return result if you are using remote shell

I am connecting to Lync server remotely using windows powshell.
When I issue the command locally from the Lync server, I get the correct response. When I do the same command from the remote shell, I get empty response.
Can you help me why this is happening?

Have you checked RBAC?
"The Get-CsRgsWorkflow cmdlet
provides a way for you to return information about the workflows configured for use in your organization.
Who can run this cmdlet: By default, members of the following groups are authorized to run the Get-CsRgsWorkflow cmdlet locally: RTCUniversalServerAdmins. To return a list of all the role-based access control (RBAC) roles this cmdlet
has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell prompt:
Get-CsAdminRole | Where-Object {$_.Cmdlets –match "Get-CsRgsWorkflow"}
" - http://technet.microsoft.com/en-us/library/gg425766(v=ocs.14).aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

WF not triggering in Quality System

Hi,
We moved the Workflow to Quality System, but the event is not triggering.The event linkage is active and workflow customizing has been done.The WF-Batch user is having SUPER user group.Kindly help on this issue.
Thanks,
Mohan

One reason were workflow is not triggered, WF and Event link not enabled.
Hope you are using BOR QMSM and triggering task for notification created in QM02,
1)     try to simulate with SWUE and check whether WF is triggered or not for a dummy task created in QMSM
2)     Check did you made WF Generic otherwise it will not trigger the WF
If you designate your workflow task as a "general task", this means that all users are authorized to start this task.
To restrict the number of authorized persons, you can assign the task to an object from the organizational plan (organizational unit, job, user,...). This is a general procedure and can be used with all types of tasks. If you assign the task directly to a user, only this person is authorized to start the task.
3)     check for user authorization
4)     Check for WF consistence swu5/swu4

Multiple Qaawses but use only one Qaaws at a time

Hi,
In Dashboard , I have two Qaawses (Qaaws1 and Qaaws2). When I am trying to generate SWF file both the qaawses are running. My requirement is, in Excel file I will set a flag value in one cell (0/1).
If the cell value is '0' then the Dashboard should use only Qaaws1.
If the cell value is '1' then the Dashboard should use only Qaaws2.
In essence my requirement is, even though multiple Qaawses are present in Dashboard, the Dashboard should be able to use only one Qaaws at a time based on my requirement (i.e., based on flag bit value 0/1).
Can any one suggest, solution for this?
Thanks in advance.
Regards,
M. N. Kishore Babu.

Hi David,
Thank you very much for the response and sorry for the delay.
Our actual scenario is a s follows:
We pass customer id and shipper Group Id as an input parameters to the flash variables from front end (through Java program). And these two values will written in Excel cells (let say Customer id in A1, and Shipper Group Id in B1)
Now there are two Qaawses, Qaaws1 and Qaaws2 in the xlf in addition to flash variables.
Qaaws 1 query is as follows :
select * from shp_details where customer id = A1
Qaaws 2 query is as follows :
select * from shp_details where customer id = A1 and ShipperGroup_id = B1
On front end we have two drop downs, Dropdown1 is for customer id and Dropdown2 is for Shipper Group Id.
When we select an item in Dropdown1, from front end we pass only Customer Id and when we select an item in Dropdown2, we pass both Customer Id and Shipper Group Id.
Our requirement is,
When we select Dropdown1 (we are passing only customer id), we expect only Qaaws1 to be executed.
When we select Dropdown2 (we are passing both customer id and shipper Group Id), we expect only Qaaws2 to be executed.
Please let me know, if I need to provide any further clarification.
Thanks & Regards,
M. N. Kishore Babu.

Multiple Tooltips are not showing up when hovering over overlapping chart items

Hi!
I ran into a problem which I am unable to fix. Either I am missing something very obvious or this is a bug. I set up a LineChart with two series. One series has multiple overlapping data points, and both series overlap in one point.
Data tips are only getting displayed where the data points of the two different series overlap. Hovering over the overlapping points of a single series does not lead to multiple data tips being displayed. According to Flex SDK docs this should be possible.
Here's a simple example which shows the problem:
<?xml version = "1.0"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
 xmlns:mx = "library://ns.adobe.com/flex/mx"
 xmlns:s = "library://ns.adobe.com/flex/spark"
 xmlns:local = "*">
 <fx:Script>
 <![CDATA[
 import mx.charts.HitData;
 import mx.collections.ArrayCollection;
 import mx.graphics.SolidColorStroke;
 [Bindable]
 private var values:ArrayCollection = new ArrayCollection([{date: new Date(2010, 10, 15), value:120},
 {date: new Date(2010, 11, 15), value: 60},
 {date: new Date(2011, 0, 15), value: 40},
 {date: new Date(2011, 0, 30), value: 7},
 {date: new Date(2011, 1, 15), value: 30},
 {date: new Date(2011, 1, 18), value: 61},
 {date: new Date(2011, 1, 23), value: 80}]);
 [Bindable]
 private var values2:ArrayCollection = new ArrayCollection([{date: new Date(2010, 10, 15), value:120},
 {date: new Date(2010, 11, 15), value: 200},
 {date: new Date(2011, 0, 15), value: 29},
 {date: new Date(2011, 0, 15, 13, 59, 99), value: 29},
 {date: new Date(2011, 0, 15, 13, 58, 99), value: 29},
 {date: new Date(2011, 0, 15, 13, 57, 99), value: 29.5},
 {date: new Date(2011, 0, 15), value: 29.5},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 31},
 {date: new Date(2011, 0, 15), value: 31},
 {date: new Date(2011, 0, 30), value: 70},
 {date: new Date(2011, 1, 15), value: 2},
 {date: new Date(2011, 1, 18), value: 180},
 {date: new Date(2011, 1, 23), value: 80}]);
 [Bindable]
 private var minDate:Date = new Date(2010, 10, 1);
 [Bindable]
 private var maxDate:Date = new Date();
 private function getDataTip(hitData:HitData):String
 return "Tip: Date: " + hitData.item.date + ' Value: ' + hitData.item.value;
 ]]>
 </fx:Script>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <s:width>100%</s:width>
 <s:height>100%</s:height>
 <s:Panel title = "Chart Test">
 <s:width>100%</s:width>
 <s:height>100%</s:height>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <mx:PlotChart id = "chart">
 <mx:width>100%</mx:width>
 <mx:height>100%</mx:height>
 
 
 <mx:selectionMode>multiple</mx:selectionMode>
 <mx:dataTipMode>multiple</mx:dataTipMode>
 <mx:showDataTips>true</mx:showDataTips>
 <mx:dataTipFunction>getDataTip</mx:dataTipFunction>
 <mx:horizontalAxis>
 <mx:DateTimeAxis minimum = "{minDate}"
 maximum = "{maxDate}"/>
 </mx:horizontalAxis>
 <mx:series>
 <mx:LineSeries dataProvider = "{values}"
 displayName = "Series 1"
 yField = "value"
 xField = "date"
 interpolateValues = "true"
 lineStroke = "{new SolidColorStroke(0x00FF00, 3, 0.5)}"
 stroke = "{new SolidColorStroke(0x00FF00, 3, 0.5)}"
 itemRenderer = "mx.charts.renderers.CircleItemRenderer"/>
 <mx:LineSeries dataProvider = "{values2}"
 displayName = "Series 2"
 yField = "value"
 xField = "date"
 interpolateValues = "true"
 lineStroke = "{new SolidColorStroke(0xFF0000, 3, 0.5)}"
 stroke = "{new SolidColorStroke(0xFF0000, 3, 0.5)}"
 itemRenderer = "mx.charts.renderers.CircleItemRenderer"/>
 </mx:series>
 </mx:PlotChart>
 </s:Panel>
</s:Application>
Any help is appreciated!
Thanks!

Hi!
I ran into a problem which I am unable to fix. Either I am missing something very obvious or this is a bug. I set up a LineChart with two series. One series has multiple overlapping data points, and both series overlap in one point.
Data tips are only getting displayed where the data points of the two different series overlap. Hovering over the overlapping points of a single series does not lead to multiple data tips being displayed. According to Flex SDK docs this should be possible.
Here's a simple example which shows the problem:
<?xml version = "1.0"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
 xmlns:mx = "library://ns.adobe.com/flex/mx"
 xmlns:s = "library://ns.adobe.com/flex/spark"
 xmlns:local = "*">
 <fx:Script>
 <![CDATA[
 import mx.charts.HitData;
 import mx.collections.ArrayCollection;
 import mx.graphics.SolidColorStroke;
 [Bindable]
 private var values:ArrayCollection = new ArrayCollection([{date: new Date(2010, 10, 15), value:120},
 {date: new Date(2010, 11, 15), value: 60},
 {date: new Date(2011, 0, 15), value: 40},
 {date: new Date(2011, 0, 30), value: 7},
 {date: new Date(2011, 1, 15), value: 30},
 {date: new Date(2011, 1, 18), value: 61},
 {date: new Date(2011, 1, 23), value: 80}]);
 [Bindable]
 private var values2:ArrayCollection = new ArrayCollection([{date: new Date(2010, 10, 15), value:120},
 {date: new Date(2010, 11, 15), value: 200},
 {date: new Date(2011, 0, 15), value: 29},
 {date: new Date(2011, 0, 15, 13, 59, 99), value: 29},
 {date: new Date(2011, 0, 15, 13, 58, 99), value: 29},
 {date: new Date(2011, 0, 15, 13, 57, 99), value: 29.5},
 {date: new Date(2011, 0, 15), value: 29.5},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30.5},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 30},
 {date: new Date(2011, 0, 15), value: 31},
 {date: new Date(2011, 0, 15), value: 31},
 {date: new Date(2011, 0, 30), value: 70},
 {date: new Date(2011, 1, 15), value: 2},
 {date: new Date(2011, 1, 18), value: 180},
 {date: new Date(2011, 1, 23), value: 80}]);
 [Bindable]
 private var minDate:Date = new Date(2010, 10, 1);
 [Bindable]
 private var maxDate:Date = new Date();
 private function getDataTip(hitData:HitData):String
 return "Tip: Date: " + hitData.item.date + ' Value: ' + hitData.item.value;
 ]]>
 </fx:Script>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <s:width>100%</s:width>
 <s:height>100%</s:height>
 <s:Panel title = "Chart Test">
 <s:width>100%</s:width>
 <s:height>100%</s:height>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 <mx:PlotChart id = "chart">
 <mx:width>100%</mx:width>
 <mx:height>100%</mx:height>
 
 
 <mx:selectionMode>multiple</mx:selectionMode>
 <mx:dataTipMode>multiple</mx:dataTipMode>
 <mx:showDataTips>true</mx:showDataTips>
 <mx:dataTipFunction>getDataTip</mx:dataTipFunction>
 <mx:horizontalAxis>
 <mx:DateTimeAxis minimum = "{minDate}"
 maximum = "{maxDate}"/>
 </mx:horizontalAxis>
 <mx:series>
 <mx:LineSeries dataProvider = "{values}"
 displayName = "Series 1"
 yField = "value"
 xField = "date"
 interpolateValues = "true"
 lineStroke = "{new SolidColorStroke(0x00FF00, 3, 0.5)}"
 stroke = "{new SolidColorStroke(0x00FF00, 3, 0.5)}"
 itemRenderer = "mx.charts.renderers.CircleItemRenderer"/>
 <mx:LineSeries dataProvider = "{values2}"
 displayName = "Series 2"
 yField = "value"
 xField = "date"
 interpolateValues = "true"
 lineStroke = "{new SolidColorStroke(0xFF0000, 3, 0.5)}"
 stroke = "{new SolidColorStroke(0xFF0000, 3, 0.5)}"
 itemRenderer = "mx.charts.renderers.CircleItemRenderer"/>
 </mx:series>
 </mx:PlotChart>
 </s:Panel>
</s:Application>
Any help is appreciated!
Thanks!

Workflows not triggered when documents are created in Doc Set via Content Organizer

The following is my scenario:
A document set (containing several documents) is created in Library A on Site A
Using Send To, the Document Set is sent to the Drop Off Library on Site B (a different Site Collection)
A Content Organizer rule then moves the Document Set and its documents to destination Library B
In Library B I have defined a workflow (using Visual Studio 2012) that is triggered when new item is create
When the Document Set arrives in Library B from the Drop Off library (i.e. when the Content Organizer moves the Doc Set to Library B), the workflow is triggered (and executes) on the Document Set, but it is NOT triggered on the documents within the Document
Set. How can I get the workflow to trigger on the documents within the set when they are created via the Content Organizer rule?
The interesting thing is that if I manually add another document to the Document Set in Library B, the workflow is triggered on that document. It just does not trigger when the documents are created via the Content Organizer.

Hi,
In edit Content Organizer rule page, I see there is an option as Automatically create a folder for each unique value of a property:
However, unlike the drop down used in the property based filters above, this drop down *only* contains properties that are required by your content type.
This is done to prevent adding folders that have no values for a property.
If you need to put similar documents to the same folder, you could consider making use of this feature.
Regards,
Rebecca Tu
TechNet Community Support

925685 - Approval process is not triggered after documents are added

Hi there,
I was wondering if anyone found already a solution for the following problem.
According to SAP Note: 925685 - Approval process is not triggered after documents are added.
Within our SAP application, we want to approve purchase orders for departments based upon the document total.
I was very astonished that employees are able to add a PO which will not trigger an approval stage and after the document is added, they have the possibility to change the document and at the update moment no approval will be started even if the document meets the approval requirements.
Therefore I really want the flexibility to give users the possibility to change their PO.
Meanwhile, documents which are added under approval, are also locked for changes, although this is another question it is also pretty annoying!
I hope anyone has already found a method or work around for the stated problems above.
(We are using SAP 8.8 PL 20)
Thanks in advance.
Kind regards,
Marcel

Hi Kambadasan,
Thank you for your reply
I'm sorry but I know how the approval templates work and they are configured correctly, however as SAP also mentioned in their own Note, this is due to the lack of SBO that SAP has such behaviour.
Hi Gordon,
Thanks for your reply.
Unfortunately I have not found the post you mentioned...
I will post my issue alson on the topic you mentioned.
Hopefully they found a solution or maybe version 8.81 will solve the problem.
Thanks a lot!!
Kind regards,
Marcel

QAAWS is not triggered if multiple QAAWS are used

Similar Messages

Maybe you are looking for