User_command is not triggering in Multiple ALV_LIST_DISPLAY

Hi,
My requirement is to display multiple alv list into a single continuous list. (Like In a page there might be multiple lists)
I have to display the report like below example.
Example: In a header table there are multiple header information say,
Office | Supplier | Purchase order | Storage Location | Warehouse .
W001 | S001    | P0001                   | ws01                      | f06
W001 | S001    | P0002                   | ws01                      | f06
W001 | S001    | P0003                   | ws01                      | f06
Fora above header information there will be detail report:
Example:
Header
Office | Supplier | Purchase order | Storage Location | Warehouse .
W001 | S001    | P0001                   | ws01                      | f06
Detail report:
Process type     | Order number     | Start date     | End date | Quantity ordered
Z001               | 3000000116            | 8/15/2011     | 9/30/2011| 0.005
Z001               |3000000120            |8/29/2011      |9/16/2011 | 0.015
Z002               |3000000117            |8/16/2011      |9/5/2011 | 0.030
Similarly:
Header
Office | Supplier | Purchase order | Storage Location | Warehouse .
W001 | S001    | P0002                   | ws01                      | f06
Detail report:
Process type     | Order number      | Start date             | End date | Quantity ordered
Z001               | 3000000119            |8/15/2011             |9/30/2011 | 0.005
Z001               |3000000121            |8/29/2011      |9/16/2011 | 0.015
Z002               |3000000130            |8/16/2011      |9/5/2011   | 0.030
etc.
I have displayed it into a single list by calling, REUSE_ALV_LIST_LAYOUT_INFO_GET & REUSE_ALV_LIST_DISPLAY within a loop . For that I have to build the layout by giving
layout-list_append = 'X'.
I have done hot spot in order number. (To display a report based on order number)
I have called the user_command. also.
Now my problem is that when I'm clicking on order number it is not executing the user_command. (Nothing is happening) , even if you put /H it is not going to debugging mode. The message is "Please chose valid function".
My assumption is that due to multiple list display SAP can't identifying the particular list. I though If i pass the PF_STATUS it will solve the problem but not working.
If I display it without LIST_APPEND ( It is displaying in different page) then USER_COMMAND is working.
I have tried with REUSE_ALV_GRID_LAYOUT_INFO_GET & REUSE_ALV_GRID_DISPLAY but here I can't display multiple grid into a List but if I click on Order_Number it is displaying the report ie. USER_COMMAND is executing.
Can anybody help me in this so that either I can execute USER_COMMAND by clicking on Order Number in the List display..
Or I can display multiple grid into a list . Please don't hesitate to ask me if you required any information.
Thanks in advance,
Abhijit

Hi Sandra,
I have tried with I_callback_pf_status as well as pass the form name of pf_status in Events table also. But nothing take me to the User_command. Is there any restriction with User_command execution if layout-List_append = 'X' ?
Now what will be the solution?
Thanks,
Abhijit

Similar Messages

QAAWS is not triggered if multiple QAAWS are used

Hi, I have 2 scenarios where I created a tab set dashboard, eg.Tab1 & Tab2.
Scenario 1:
Tab1 -> has a list box and a chart, each one is using QAAWS connection. List box is refreshed on load. Data in chart should be refreshed on trigger when value changes on cell (inserted by list box)
Tab2 -> same as above.
Issue: When I preview the dashboard, only tab 1 is working fine. In Tab 2, List box shows the data, but nothing is displayed in the chart.
What went wrong in my dashboard? Can multiple QAAWS refresh on load?
Scenario 2:
Tab1 -> has a list box and a chart, each one is using QAAWS connection. List box is refreshed on load. Data in chart should be refreshed on trigger when value changes on cell (inserted by list box)
Tab2 -> has 2 charts where first one has drill down enabled to reflect the data in 2nd chart, both are using QAAWS.
Issue: Tab1 list box displayed the data, but chart is empty.
          Tab2 : 1st chart displays the data, but drill down data is not displayed in the 2nd chart.
          When I selected the other value in the list box of tab 1, chart is refreshed with data display. At the same time, the detail chart in tab 2 is displaying the data as well.
   Is anyone has clue on this?
Please help me.. Thank you very much!
System version: SAP BI 7.0, BO XI 3.0, Xcelsius 2008 SP3
Edited by: GT Teow on May 29, 2009 6:38 AM

Hi,
Not quite sure what you mean.
Try reading this [whitepaper|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502f3f56-f17d-2b10-a5bf-a85f12a9c30a], if you use a Connection Refresh button with Refresh on Load instead of the QaaWS connector Refresh on Load you might find that the 2nd query triggers on startup as well.
Regards,
Matt

Job not getting triggered for Multiple Scheduler Events

hi,
I would like a job to be triggered for multiple scheduler events, subscribing to a single event works fine. But, when I set multiple event condition, nothing works.
My objective is to run a job, whenever job starts or restarts or exceeds max run duration.
Note : Is it possible to trigger a job, when a job RESTARTS by subscribing to JOB_START ????????
procedure sniffer_proc(p_message in sys.scheduler$_event_info)
is
--Code
end sniffer_proc
dbms_scheduler.create_program(program_name => 'PROG',
program_action => 'sniffer_proc',
program_type => 'stored_procedure',
number_of_arguments => 1,
enabled => false);
-- Define the meta data on scheduler event to be passed.
dbms_scheduler.define_metadata_argument('PROG',
'event_message',1);
dbms_scheduler.enable('PROG');
dbms_scheduler.create_job
('JOB',
program_name => 'PROG',
* event_condition => 'tab.user_data.event_type = ''JOB_OVER_MAX_DUR''' ||*
*' or tab.user_data.event_type = ''JOB_START''',*
queue_spec => 'sys.scheduler$_event_queue,auagent',
enabled => true);
I tried this too...
dbms_scheduler.create_job
('JOB',
program_name => 'PROG',
* event_condition => 'tab.user_data.event_type = ''JOB_OVER_MAX_DUR''' ||*
*' and tab.user_data.event_type = ''JOB_START''',*
queue_spec => 'sys.scheduler$_event_queue,auagent',
enabled => true);
Need help
Thanks...
Edited by: user602200 on Dec 28, 2009 3:00 AM
Edited by: user602200 on Dec 28, 2009 3:03 AM

Hi,
Here is complete code which I tested on 10.2.0.4 which shows a second job that runs after a first job starts and also when it has exceeded its max run duration. It doesn't have the condition but just runs on every event raised, but the job only raises the 2 events.
Hope this helps,
Ravi.
-- run a job when another starts and exceeds its max_run_duration
set pagesize 200
-- create a user just for this test
drop user test_user cascade;
grant connect, create job, create session, resource,
create table to test_user identified by test_user ;
connect test_user/test_user
-- create a table for output
create table job_output (log_date timestamp with time zone,
        output varchar2(4000));
-- add an event queue subscriber for this user's messages
exec dbms_scheduler.add_event_queue_subscriber('myagent')
-- create the first job and have it raise an event whenever it completes
-- (succeeds, fails or stops)
begin
dbms_scheduler.create_job
   ( 'first_job', job_action =>
     'insert into job_output values(systimestamp, ''first job runs'');'||
     'commit; dbms_lock.sleep(70);',
    job_type => 'plsql_block',
    enabled => false, repeat_interval=>'freq=secondly;interval=90' ) ;
dbms_scheduler.set_attribute ( 'first_job' , 'max_runs' , 2);
dbms_scheduler.set_attribute
    ( 'first_job' , 'raise_events' , dbms_scheduler.job_started);
dbms_scheduler.set_attribute ( 'first_job' , 'max_run_duration' ,
    interval '60' second);
end;
-- create a simple second job that runs when the first starts and after
-- it has exceeded its max_run_duration
begin
dbms_scheduler.create_job('second_job',
                            job_type=>'plsql_block',
                            job_action=>
    'insert into job_output values(systimestamp, ''second job runs'');',
                            event_condition =>
   'tab.user_data.object_name = ''FIRST_JOB''',
                            queue_spec =>'sys.scheduler$_event_queue,myagent',
                            enabled=>true);
end;
-- this allows multiple simultaneous runs of the second job on 11g and up
begin
$IF DBMS_DB_VERSION.VER_LE_10 $THEN
    null;
$ELSE
    dbms_scheduler.set_attribute('second_job', 'parallel_instances',true);
$END
end;
-- enable the first job so it starts running
exec dbms_scheduler.enable('first_job')
-- wait until the first job has run twice
exec dbms_lock.sleep(180)
select * from job_output;

Top-of-page event is not triggered

Hi,
I have a problem with top-of-page event. I have a report that shows the results in ALV grid display. But I use "REUSE_ALV_GRID_DISPLAY" not OO alv and there is only one screen with number 1000. On the menu toolbar there is a button that prints the data of ALV in a list using "write" statement. While writing , "top of page" event is not triggered. I expect that it is triggered at the first "write" statement but isn't. Is there anyone who knows the cause of this problem?
The code is below.
Thanks.
Tables ...
TABLES : mara , makt , ekko , ekpo , zzith_yukh , lfa1 , t001w , lips ,
         eket .
global variables
DATA : BEGIN OF list OCCURS 1,
       zztahsk LIKE ekko-zztahsk ,
       zterm LIKE ekko-zterm ,
       txz01 LIKE ekpo-txz01 ,
       name1 LIKE lfa1-name1 ,
       menge LIKE ekpo-menge ,
       meins LIKE ekpo-meins ,
       fyukl LIKE zzith_yukh-zzdel_flag ,
                         " Yüklenmiş miktar var göstergesi ...
       inco1 LIKE ekko-inco1 ,
       netwr LIKE ekpo-netwr ,
       waers LIKE ekko-waers ,
       bedat LIKE ekko-bedat ,
       zzontar LIKE ekko-zzontar ,
       slfdt LIKE eket-slfdt ,
       tname1 LIKE t001w-name1 ,
       banfn LIKE ekpo-banfn ,
       ebeln LIKE ekko-ebeln ,
       ebelp LIKE ekpo-ebelp ,
       lifnr LIKE ekko-lifnr ,
       mtart LIKE mara-mtart ,
       matkl LIKE mara-matkl ,
       ekgrp LIKE ekko-ekgrp ,
       matnr LIKE mara-matnr ,
       eknam LIKE t024-eknam,
       bukrs LIKE ekko-bukrs,
       zzbltur LIKE ekko-zzbltur,
       END   OF list         .
DATA temp LIKE list OCCURS 1 WITH HEADER LINE .
DATA total LIKE list OCCURS 1 WITH HEADER LINE .
ALV fields
TYPE-POOLS : slis.
DATA : gt_fields TYPE slis_fieldcat_alv OCCURS 1 WITH HEADER LINE .
DATA : gt_events TYPE slis_t_event.
DATA : gs_layout TYPE slis_layout_alv.
DATA : gv_title TYPE lvc_title VALUE 'Günlük Depo Sayım Miktarları'.
DATA : gt_top_of_page TYPE slis_t_listheader.
selection screen
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001 .
*Satınalma organizasyonu
*Satınalma grubu
*Satıcı
*Tarih
*SAS no
*Dosya no
SELECT-OPTIONS:
s_bukrs FOR ekko-bukrs .
SELECTION-SCREEN SKIP .
SELECT-OPTIONS:
s_ekorg FOR ekko-ekorg OBLIGATORY MEMORY ID eko ,
s_ekgrp FOR ekko-ekgrp ,
s_lifnr FOR ekko-lifnr ,
s_ebeln FOR ekko-ebeln .
SELECTION-SCREEN END OF BLOCK a        .
Define Katalog
DEFINE fill_catalog .
gt_fields-fieldname = &1.
gt_fields-tabname    = &2.
gt_fields-seltext_l = &3.
gt_fields-seltext_m = &3.
gt_fields-seltext_s = &3.
gt_fields-checkbox   = &4.
gt_fields-cfieldname = &5.
gt_fields-ref_tabname = &6.
gt_fields-ref_fieldname = &7.
gt_fields-edit       = &8.
append gt_fields .
clear gt_fields .
END-OF-DEFINITION.
Modify Catalog
DEFINE modify_catalog .
gt_fields-seltext_m = &1 .
modify gt_fields transporting seltext_m where fieldname = &2 .
END-OF-DEFINITION     .
TOP-OF-PAGE.
write 'top of page'.
PERFORM top-of-page.
start-of-selection
START-OF-SELECTION .
PERFORM get_data.
PERFORM listele .
*&      Form listele .
FORM listele .
PERFORM get_events .
PERFORM alv_list_header.
PERFORM get_field_catalog USING 'LIST' .
PERFORM display_alv    .
ENDFORM.                    " listele.
*&      Form getfield_Catalog
FORM get_field_catalog USING p_tabname .
fill_catalog :
'EBELN'   'LIST' '' '' '' 'EKPO' 'EBELN'   '' ,
'ZZTAHSK' 'LIST' '' '' '' 'EKKO' 'ZZTAHSK' '' ,
'ZZBLTUR' 'LIST' '' '' '' 'EKKO' 'ZZBLTUR' '' ,
'MATNR'   'LIST' '' '' '' 'MARA' 'MATNR'   '' ,
'MATKL'   'LIST' '' '' '' 'MARA' 'MATKL'   '' ,
'TXZ01'   'LIST' '' '' '' 'EKPO' 'TXZ01'   '' ,
'NAME1'   'LIST' '' '' '' 'LFA1' 'NAME1'   '' ,
'MENGE'   'LIST' '' '' '' 'EKPO' 'MENGE'   '' ,
'MEINS'   'LIST' '' '' '' 'EKPO' 'MENGE'   '' ,
'FYUKL'   'LIST' '' '' '' 'ZZITH_YUKH' 'ZZDEL_FLAG'   '' ,
'INCO1'   'LIST' '' '' '' 'EKKO' 'INCO1'   '' ,
'NETWR'   'LIST' '' '' '' 'EKPO' 'NETWR'   '' ,
'WAERS'   'LIST' '' '' '' 'EKKO' 'WAERS'   '' ,
'BEDAT'   'LIST' '' '' '' 'EKKO' 'BEDAT'   '' ,
'ZZONTAR' 'LIST' '' '' '' 'EKKO' 'ZZONTAR' '' ,
'SLFDT'   'LIST' '' '' '' 'EKET' 'SLFDT'   '' ,
'TNAME1' 'LIST' '' '' '' 'T001W' 'NAME1' '' ,
'BANFN'   'LIST' '' '' '' 'EKPO' 'BANFN'   '' ,
'EKNAM'   'LIST' '' '' '' 'T024' 'EKNAM'   '' .
gt_fields-ddictxt = 'M' .
MODIFY gt_fields TRANSPORTING ddictxt WHERE fieldname NE space.
modify_catalog 'Yükleme No'            'VBELN'   .
modify_catalog 'Malzeme Türü'          'ZZBLTUR' .
modify_catalog 'Malzeme Tanımı'        'TXZ01'   .
modify_catalog 'Satıcı'                'NAME1'   .
modify_catalog 'Teslim Şekli'          'INCO1'   .
modify_catalog 'Döviz Tutarı'          'ZZTOPLAM'.
modify_catalog 'Döviz Kodu'            'WAERS'   .
modify_catalog 'Siparişi Veren'        'TNAME1' .
modify_catalog 'Tahmini İthalat Trh.' 'SLFDT'   .
modify_catalog 'İthalata İntikal Trh.' 'BEDAT'   .
modify_catalog 'Dosya Onay Tarihi'     'ZZONTAR' .
modify_catalog 'Talep No'              'BANFN'   .
modify_catalog 'Dosya Sorumlusu'       'EKNAM'   .
modify_catalog 'Yük.Göstergesi'        'FYUKL'   .
ENDFORM.                    " getfield_Catalog
*&      Form display_alv
      text
--> p1        text
<-- p2        text
FORM display_alv .
DATA lv_repid LIKE sy-repid .
lv_repid = sy-repid .
CLEAR gs_layout.
gs_layout-zebra                 = 'X'.
gs_layout-colwidth_optimize     = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = lv_repid
      i_callback_pf_status_set = 'SET_PF_STATUS'
      i_callback_user_command = 'USER_COMMAND'
      is_layout                = gs_layout
      it_fieldcat              = gt_fields[]
      it_events                = gt_events[]
    TABLES
      t_outtab                 = list[].
ENDFORM.                    " display_alv
FORM set_pf_status USING iv_nodisplay TYPE slis_t_extab.
SET PF-STATUS 'STANDARD' ."excluding iv_nodisplay.
ENDFORM.                    " SET_PF_STATUS
FORM user_command USING iv_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
CASE iv_ucomm .
    WHEN 'PRINT' . PERFORM print_data .
ENDCASE       .
ENDFORM.                    "USER_COMMAND
FORM get_events .
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = gt_events.
READ TABLE gt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE 'ALV_TOP_OF_PAGE' TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
ENDFORM.                    " getevents
FORM alv_list_header .
DATA: ls_line TYPE slis_listheader.
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Satınalma Org.:'.
CONCATENATE s_ekorg-low s_ekorg-high
INTO ls_line-info SEPARATED BY '/'.
APPEND ls_line TO gt_top_of_page.
ls_line-key = 'Satınalma Grubu.:'.
CONCATENATE s_ekgrp-low s_ekgrp-high
INTO ls_line-info SEPARATED BY '/'.
APPEND ls_line TO gt_top_of_page.
ls_line-key = 'Satıcı.:'.
CONCATENATE s_lifnr-low s_lifnr-high
INTO ls_line-info SEPARATED BY '/'.
APPEND ls_line TO gt_top_of_page.
ls_line-key = 'SAS No.:'.
CONCATENATE s_ebeln-low s_ebeln-high
INTO ls_line-info SEPARATED BY '/'.
APPEND ls_line TO gt_top_of_page.
ENDFORM.                    " alv_list_header
FORM alv_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = gt_top_of_page.
ENDFORM.                    "TOP_OF_PAGE
FORM get_data .
DATA : BEGIN OF tr ,
          menge LIKE eket-menge ,
          dabmg LIKE eket-dabmg ,
         END OF tr ,
         zzfiilytar LIKE zzith_yukh-zzfiilytar .
*- Get data ...
SELECT *
    INTO CORRESPONDING FIELDS OF TABLE list
    FROM ekpo AS a
   INNER JOIN ekko AS b ON bebeln = aebeln
WHERE b~ebeln IN s_ebeln AND
        b~bukrs IN s_bukrs AND
        b~loekz EQ space   AND
        b~lifnr IN s_lifnr AND
        b~ekorg IN s_ekorg AND
        b~ekgrp IN s_ekgrp AND
        a~loekz EQ space   AND
        a~elikz EQ space .
LOOP AT list .
    CLEAR tr .
    SELECT menge dabmg
      INTO tr
      FROM eket
     WHERE ebeln = list-ebeln AND
           ebelp = list-ebelp.
      tr-menge = tr-menge - tr-dabmg .
    ENDSELECT.
    IF tr-menge LE 0 .
      DELETE list .
    ELSE .
      list-menge = tr-menge .
      IF tr-dabmg GT 0 .
        list-fyukl = '*' .
      ENDIF .
      SELECT SINGLE butxt INTO list-tname1 FROM t001
        WHERE bukrs = list-bukrs .
      SELECT SINGLE slfdt INTO list-slfdt FROM eket
      WHERE ebeln = list-ebeln AND
            ebelp = list-ebelp .
      SELECT SINGLE name1 INTO list-name1 FROM lfa1 WHERE lifnr = list-lifnr.
      SELECT SINGLE mtart matkl INTO (list-mtart,list-matkl)
      FROM mara WHERE matnr = list-matnr .
      SELECT SINGLE eknam INTO list-eknam FROM t024 WHERE ekgrp = list-ekgrp .
      MODIFY list .
    ENDIF .
ENDLOOP      .
ENDFORM.                    " get_data
FORM print_data .
LEAVE TO LIST-PROCESSING .
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE 229 .
SET PF-STATUS SPACE .
PERFORM top-of-page .
malzeme türü 1005 ler yazdırılır
PERFORM yazdir_1005 .
malzeme türü 1005 olmayanlar yazdırılır
PERFORM yazdir_ne_1005 .
Satınalama grupları bilgisi yazdırılır
PERFORM yazdir_ekgrp .
ENDFORM.                    " print_data
FORM top-of-page .
WRITE : 'ÜLKER GRUBU KONSOLİDE' .
WRITE AT 40 'Sevkiyat Bekleyen Malzemeler' COLOR COL_HEADING .
WRITE : 180 sy-uname , sy-datum , sy-uzeit.
NEW-LINE .
ULINE 0(229) .
WRITE :/2 'Rapor Kodu..............:' , (10) sy-tcode .
WRITE :/2 'Satınalma Organizasyonu.:' , (10) s_ekorg-low, '/', (10) s_ekorg-high .
WRITE :/2 'Satınalma Grubu.........:' , (10) s_ekgrp-low, '/', (10) s_ekgrp-high .
WRITE :/2 'Satıcı..................:' , (10) s_lifnr-low, '/', (10) s_lifnr-high .
WRITE :/2 'Satınalma Sipariş No....:' , (10) s_ebeln-low, '/', (10) s_ebeln-high .
NEW-LINE .
ULINE 0(229) .
Başlıklar yazılır
FORMAT COLOR COL_HEADING .
WRITE :
/(10) 'SAS NO.' CENTERED,
(6) 'TAHSİS' CENTERED,
(5) 'ÖDEME'   CENTERED,
(5) 'Bel.T'   CENTERED,
(25) 'MALZEME' CENTERED,
(25) 'SATICI' CENTERED,
(12) 'MİKTAR' CENTERED,
(3) 'BRM' CENTERED,
(3) 'G' ,
(7) 'TES.ŞK.' CENTERED,
(16) 'DÖVİZ TUTARI' CENTERED,
(3) 'DB.' CENTERED,
(13) 'İTH.İNTK.TRH.' CENTERED,
(13) 'DOSYA ON.TRH.' CENTERED,
(10) 'TAHMİN.İTH.TRH.' CENTERED,
(20) 'SİPARİŞ VEREN' CENTERED,
(10) 'TALEP NO.' CENTERED,
(18) 'DOSYA SORUMLUSU' CENTERED.
ULINE 0(229) .
FORMAT RESET .
ENDFORM.                    " top-of-page
FORM yazdir_1005 .
DATA ebeln LIKE list-ebeln .
SORT list BY zzbltur matnr .
temp[] = list[] .
DELETE temp WHERE mtart <> '1005' .
LOOP AT list WHERE mtart = '1005' .
    CLEAR list-netwr .
    IF ebeln NE list-ebeln OR ebeln EQ space .
      REFRESH total . CLEAR total .
      ebeln = list-ebeln .
      LOOP AT temp WHERE ebeln = list-ebeln .
        list-netwr = list-netwr + temp-netwr .
        CLEAR total .
        total-txz01 = '*** TKNK.MLZ. TOPLAMI ****' .
        total-meins = temp-meins .
        total-menge = temp-menge .
        COLLECT total .
      ENDLOOP                               .
      PERFORM write_list USING '1' .
      LOOP AT total .
        PERFORM write_list USING '2' .
      ENDLOOP .
      AT END OF zzbltur .
        ULINE 0(229) .
      ENDAT .
    ENDIF .
ENDLOOP .
ENDFORM.                    " yazdir_1005
FORM write_list USING    flag .
flag 1 1005 için yazdırma
flag 2 ise ara toplam
IF flag = '1' .
   FORMAT COLOR COL_NORMAL .
    WRITE :
    /(10) list-ebeln ,
     (6) list-zztahsk,
     (5) list-zterm,
     (5) list-zzbltur ,
     (25) list-txz01,
     (25) list-name1,
     (12) list-menge,
     (3) list-meins,
     (3) list-fyukl,
     (7) list-inco1,
     (16) list-netwr,
     (3) list-waers,
     (13) list-bedat,
     (13) list-zzontar,
     (10) list-slfdt ,
     (20) list-tname1,
     (10) list-banfn ,
     (18) list-eknam .
    FORMAT RESET .
ELSEIF flag = '2' .
   FORMAT COLOR COL_TOTAL .
    WRITE :
    /(10) '' ,
     (6) '' ,
     (5) '' ,
     (5) '' ,
     (25) total-txz01,
     (25) '' ,
     (12) total-menge,
     (3) total-meins,
     (3) '' ,
     (7) '' ,
     (16) '' ,
     (3) '' ,
     (13) '' ,
     (13) '' ,
     (10) '' ,
     (20) '' ,
     (10) '' ,
     (18) '' .
    FORMAT RESET .
ELSEIF flag = '3' .
   FORMAT COLOR COL_TOTAL .
    WRITE :
   /(10) '' ,
    (6) '' ,
    (5) '' ,
    (5) '' ,
    (25) total-txz01,
    (25) '' ,
    (12) total-menge,
    (3) '' ,
    (3) '' ,
    (7) '' ,
    (16) total-netwr ,
    (3) '' ,
    (13) '' ,
    (13) '' ,
    (10) '' ,
    (20) '' ,
    (10) '' ,
    (18) '' .
    FORMAT RESET .
ENDIF .
ENDFORM.                    " write_list
FORM yazdir_ne_1005 .
DATA matnr LIKE list-matnr .
SORT list BY zzbltur matkl matnr .
temp[] = list[] .
DELETE temp WHERE mtart = '1005' .
LOOP AT list WHERE mtart <> '1005' .
Her yeni Malzeme için ara toplam yazılır
    IF matnr NE list-matnr AND matnr NE space .
       REFRESH total . CLEAR total .
Toplamlar alınır
      LOOP AT temp WHERE matnr = matnr .
        CLEAR total .
        total-netwr = temp-netwr .
        total-menge = temp-menge .
        total-txz01 = '***     TOPLAM        ****' .
        COLLECT total .
      ENDLOOP                          .
      LOOP AT total .               .
        PERFORM write_list USING '3' .
      ENDLOOP                       .
      ULINE 0(229) .
    ENDIF                      .
    PERFORM write_list USING '1' .
    matnr = list-matnr            .
ENDLOOP                           .
Toplamlar alınır
LOOP AT temp WHERE matnr = matnr .
    REFRESH total . CLEAR total .
    total-netwr = temp-netwr .
    total-menge = temp-menge .
    total-txz01 = '***     TOPLAM        ****' .
    COLLECT total .
ENDLOOP .
LOOP AT total .
    PERFORM write_list USING '3' .
ENDLOOP       .
ULINE 0(229) .
ENDFORM.                    " yazdir_ne_1005
FORM yazdir_ekgrp .
DATA: BEGIN OF total OCCURS 1 ,
        eknam LIKE list-eknam   ,
        zzbltur LIKE list-zzbltur ,
        sayi TYPE i ,
        END OF total          .
DATA: BEGIN OF gtotal OCCURS 1 ,
        eknam LIKE list-eknam   ,
        zzbltur LIKE list-zzbltur ,
        sayi TYPE i ,
        END OF gtotal          .
DATA: bltur LIKE zzith_bltur OCCURS 1 WITH HEADER LINE .
DATA: len TYPE i .
DATA: wa LIKE total.
REFRESH temp .
SELECT * INTO TABLE bltur FROM zzith_bltur .
CLEAR bltur .
MOVE : 'ZZZZ'   TO bltur-zzbltur , " Satır toplamı için ...
         text-002 TO bltur-zztanim .
APPEND bltur .
CLEAR list   .
SORT list BY eknam ebeln .
DELETE ADJACENT DUPLICATES FROM list COMPARING eknam ebeln .
LOOP AT list .
    CLEAR : total, gtotal .
    total-eknam = list-eknam .
    total-zzbltur = list-zzbltur .
    total-sayi = 1 .
    COLLECT total   .
    total-eknam   = list-eknam .
    total-zzbltur = 'ZZZZ' .
    total-sayi = 1 .
    COLLECT total   .
    gtotal-eknam = text-001 .
    gtotal-zzbltur = list-zzbltur .
    gtotal-sayi = 1 .
    COLLECT gtotal   .
    gtotal-eknam = text-001 .
    gtotal-zzbltur = 'ZZZZ' .
    gtotal-sayi = 1 .
    COLLECT gtotal   .
ENDLOOP      .
FORMAT COLOR COL_HEADING.
ULINE AT /1(145).
WRITE :/
sy-vline , (15) 'Dosya Sorumlusu' , sy-vline .
LOOP AT bltur .
    WRITE :(15) bltur-zztanim , sy-vline .
ENDLOOP .
ULINE AT /1(145).
FORMAT RESET   .
total-zzbltur = '0001' .
MODIFY total TRANSPORTING zzbltur WHERE zzbltur = space .
gtotal-zzbltur = '0001' .
MODIFY gtotal TRANSPORTING zzbltur WHERE zzbltur = space .
SORT total BY eknam .
LOOP AT total .
    AT NEW eknam .
      WRITE :/
      sy-vline , (15) total-eknam COLOR COL_HEADING ,
      sy-vline .
      LOOP AT bltur   .
        len = sy-tabix * 18 .
        len = len + 3 .
        CLEAR wa .
        READ TABLE total INTO wa WITH KEY zzbltur = bltur-zzbltur
                                          eknam   = total-eknam .
        WRITE AT len(15) wa-sayi NO-ZERO.
        WRITE sy-vline .
      ENDLOOP    .
    ENDAT      .
ENDLOOP .
LOOP AT gtotal .
    AT NEW eknam .
      FORMAT COLOR COL_TOTAL .
      WRITE :/
      sy-vline , (15) gtotal-eknam ,
      sy-vline .
      LOOP AT bltur   .
        len = sy-tabix * 18 .
        len = len + 3 .
        CLEAR wa .
        READ TABLE gtotal INTO wa WITH KEY zzbltur = bltur-zzbltur
                                           eknam   = text-001    .
        WRITE AT len(15) wa-sayi NO-ZERO.
        WRITE sy-vline .
      ENDLOOP    .
    ENDAT      .
ENDLOOP .
ULINE AT /1(145).
FORMAT RESET .
ENDFORM.                    " yazdir_ekgrp

Hi,
In the function use the top-of-page event as follows:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
                I_BYPASSING_BUFFER          =
                I_BUFFER_ACTIVE             =
                I_INTERFACE_CHECK           = ' '
             I_CALLBACK_PROGRAM          = 'ZRPMSLM'
                I_CALLBACK_PF_STATUS_SET    = ' '
                I_CALLBACK_USER_COMMAND     = ' '
           <b> I_CALLBACK_TOP_OF_PAGE      = 'TOP'</b>
Define whatever to appear in top-of page in a subroutine named TOP.
Hope this helps.
Reward if helpful.
Regards,
Sipra

Rel. strategy is not triggered while creation of PR with cost centr

Hi Gurus,
While creation of PR release strategy is not getting triggered with cost centre BCWSV870. But release strategy of PR triggered for cost centre BCWSV852 (In PR changed only cost centre as BCWSV852 instead of BCWSV870). Both cost centres are similar and the both cost centres are exist in characteristics value in CL20N for the same release strategy.
My question is why for one cost centre triggers release strategy triggers and for other cost centre release strategy is not triggered. Can you please tell how come this and rewarded for answer this.
With regards,
C. Sundar Rajan

Hi,
In regard to problematic PR with cost center BCWSV870, was your PR maintained with only one line item? or multiple line items?. In additions, when defining cost center as part of the release strategy structure, did you enter all cost centers with leading zeros? Tak a further look into OSS Note 365604 for your further investigation.
Cheers,
HT

ChaRM: Mail not triggered when current user = mail receiver?

Dearl all:
     Ive noticed that mails are not triggered when the user who is processing a document is the same who will receive it. Is there any way to deactivate this functionality?
Thank you very much,
Federico.

Hi Miguel, how are you?
      I think it is a nice feature not sending a mail when the user who is changing the status in the one who would receive the mail in that next status. But Im in the testing pahse of implementing SOLMAN and I would like to know if this is a real feature or a flaw, and besides I would like to turn off this possible feature, just for the testing phase. This is not a big deal anyway.
    By the way, I also notice that if there is a partner assigned multiple times to a document, it doesnt trigger the mails as expected.
Best regards,
Federico.

Alert 7055 - Manual Approval Required, XML messages to ECC not Triggered.

Hi All,
I have a behavior in our Client Production System.
We have setup a process in which if a PO confirmation Dates are -5 / + 5 days appart then that line item should result in Manual Approval Required.
Even though a PO line item is in Status "Manual Approval Required" a XML message is triggered and a AB confirmation gets created in ECC.
Issue we faced:- even if the Confirmation Dates are within range still the PO was ending up in Manual Approval specially if vendor enters multiple Schedule lines for the same PO line item with Dates with in +/- 5 days.
In our Test system , we implemented notes given by SAP to fix the above issue the issue looks fixed but,
Now the behavior is if the line item is having Status "Manual Approval Required", NO XML messages are getting triggered for a PO with Confirmation date beyond +/- 5 days. Once the the approval is given and Schedule line is Adopted the XML is getting triggered correctly.
I want to know from all the Experts on to understand which behavior is correct is Production correct(excluding the Bug) or the Test systems not triggering XML unless the Manual Approval is given.
I did read SAP help but i am not understanding since SAP mentions both behavior not Clear when such behavior should occur.
Please help to understand thsi behavior.
Please advise.
Thx
MJ

Hi MJ,
The behaviour in your Test system is correct.
When there is Manual approval is required which means deviation from requested which first needs to be accepted by customer in SNC.
If Purchase order item status is Manual approval required and XML's are getting trigger which updates ECC with AB-confirmation then customer will assume PO is confirmed without deviation until he/she compares requested schedule line and confirmed schedule line.
SAP standard behaviour is also same as your Test system behaviour see the help link(In process point#6)
http://help.sap.com/saphelp_snc70/helpdata/EN/48/1010953b2b3558e10000000a42189d/content.htm
Regards,
Nikhil

Approval Process Not triggering?

Hello,
I have created a simple Approval process in which request should go to the Beneficiary manager through JDEVELOPER. I have also registered this Approval process with OIM.
After that i have created two Approval policies..
REQUEST LEVEL--
This is Auto Approved.
Approval Rule :: Template Name equals Provision Resource.
Set Priority : 1 (Request Type=Provision Resource)
OPERATIONAL LEVEL --
Approval Process attcahed at this level.
Approval Rule :: Template Name equals Provision Resource.
When i am creating a request for a particular resource the request is getting assigned to XELSYSADM by default (as per the Developers Guide for OIM 11g, if no approval policy is attached with the template the default Approval process gets trigerred and the request gets assigned to XELSYSADM.)
Can somebody help me by telling why the Default Approval process is getting triggered and not the one which i have attached at the Operational level?
Am i missing Something?
Thanks in Advance.

As i have mentioned earlier, it is configured such that the appropriate approval process is triggered when a request for particualr resources is requested.
There are multiple tasks in each one of the approval process.
The approvals were triggering well 2 days ago and suddenly there seams to be a problem in the approval triggering.
The approval process was not edited / updated for any of these resources. Wondering why suddenly OIM does not work well for the approval triggering???
here the problem is none of the configured approval processes are triggering. Its not just one approval process but all 12 approval processes (including standard approval) are not triggering when the request is raised.
Appreciate your help till now, please suggest me how to make OIM trigger the approvals again!
Thanks

SM21 log Lock triggered against multiple execution

Hi All,
Please refer to the log in SM21 XI. I have checked SM12 , no locks displayed. Please advise on how to analyze this log further.
04:10:26 sapxi_XP1_* DIA PIAFUSER Lock triggered against multiple execution: ID: C*************************
Regards
Shiva

Dear Shiva, dear Daniel,
the technical background for introducing this system log entry was to deal with parallel execution of one message. For details please refer to SAP Note 1147287.
Best regards,
Harald Keimer

End_of_page is not triggering in ALV

hi mates
         the code below is not triggering end-of-page event, can anyone help me. reply asap
TABLES:VBAP.
TYPE-POOLS:SLIS.
DATA: BEGIN OF VBAP_TYPE OCCURS 0,
      VBELN TYPE VBAP-VBELN,
      POSNR TYPE VBAP-POSNR,
      MATKL TYPE VBAP-MATKL,
      MATNR TYPE VBAP-MATNR,
      END OF VBAP_TYPE.
DATA:GET_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
     WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
     HT_EVENT    TYPE SLIS_T_EVENT,
     WA_EVENT     TYPE SLIS_ALV_EVENT,
     HT_HEADER   TYPE SLIS_T_LISTHEADER,
     WA_HEADER   TYPE SLIS_LISTHEADER.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM GET_FIELDCATALOG.
PERFORM FIELD_EVENT.
PERFORM FIELD_DISPLAY.
*&      Form get_data
      text
FORM GET_DATA.
SELECT VBELN
         POSNR
         MATKL
         MATNR
       FROM VBAP
       INTO TABLE VBAP_TYPE.
ENDFORM.                    "get_data
*&      Form get_fieldcatalog
      text
FORM GET_FIELDCATALOG.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_L = 'sales doc'.
APPEND WA_FIELDCAT TO GET_FIELDCAT.
CLEAR WA_FIELDCAT.
clear wa_fieldcat.
wa_fieldcat-col_pos = 1.
wa_fieldcat-fieldname = 'VBELN'.
wa_fieldcat-seltext_l = 'sales doc'.
append wa_fieldcat to get_fieldcat.
clear wa_fieldcat.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-SELTEXT_L = 'sales doc item'.
APPEND WA_FIELDCAT TO GET_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-FIELDNAME = 'MATKL'.
WA_FIELDCAT-SELTEXT_L = 'Material Group'.
APPEND WA_FIELDCAT TO GET_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_L = 'Material No'.
APPEND WA_FIELDCAT TO GET_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    "get_fieldcatalog
*&      Form field_display
      text
FORM FIELD_DISPLAY.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
   I_INTERFACE_CHECK              = ' '
   I_BYPASSING_BUFFER             =
   I_BUFFER_ACTIVE                = ' '
      I_CALLBACK_PROGRAM             = SY-CPROG
   I_CALLBACK_PF_STATUS_SET       = ' '
   I_CALLBACK_USER_COMMAND        = ' '
   I_STRUCTURE_NAME               =
   IS_LAYOUT                      =
      IT_FIELDCAT                    = GET_FIELDCAT[]
   IT_EXCLUDING                   =
   IT_SPECIAL_GROUPS              =
   IT_SORT                        =
   IT_FILTER                      =
   IS_SEL_HIDE                    =
   I_DEFAULT                      = 'X'
   I_SAVE                         = ' '
   IS_VARIANT                     =
      IT_EVENTS                      = HT_EVENT
   IT_EVENT_EXIT                  =
   IS_PRINT                       =
   IS_REPREP_ID                   =
   I_SCREEN_START_COLUMN          = 0
   I_SCREEN_START_LINE            = 0
   I_SCREEN_END_COLUMN            = 0
   I_SCREEN_END_LINE              = 0
   IR_SALV_LIST_ADAPTER           =
   IT_EXCEPT_QINFO                =
   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
   E_EXIT_CAUSED_BY_CALLER        =
   ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = VBAP_TYPE
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "field_display
*&      Form field_event
      text
FORM FIELD_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = HT_EVENT.
WA_EVENT-NAME = SLIS_EV_TOP_OF_PAGE .
WA_EVENT-FORM = 'TOP_OF_PAGE'.
APPEND WA_EVENT TO HT_EVENT.
CLEAR WA_EVENT.
WA_EVENT-NAME = SLIS_EV_END_OF_PAGE .
WA_EVENT-FORM = 'END_OF_PAGE'.
APPEND WA_EVENT TO HT_EVENT.
CLEAR WA_EVENT.
READ TABLE ht_event INTO wa_event
                     WITH KEY name = slis_ev_top_of_page .
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
IF sy-subrc = 0.
   wa_event-form = 'TOP-OF-PAGE'.
   wa_event-form = 'END_OF_PAGE'.
   MODIFY ht_event FROM wa_event INDEX sy-tabix.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "field_event
*&      Form top_of_page
      text
FORM TOP_OF_PAGE.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' this is the sales document data'.
APPEND WA_HEADER TO HT_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = HT_HEADER
I_LOGO                   =
I_END_OF_LIST_GRID       =
I_ALV_FORM               =
ENDFORM.                    "top_of_page
*&      Form END_OF_Page
      text
FORM END_OF_PAGE.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' this is the end of page'.
APPEND WA_HEADER TO HT_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    IT_LIST_COMMENTARY       = HT_HEADER
I_LOGO                   =
I_END_OF_LIST_GRID       =
I_ALV_FORM               =
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
     it_list_commentary       = ht_header
I_LOGO                   =
I_END_OF_LIST_GRID       =
I_ALV_FORM               =
endform.

Hi,
Try this code for end_of_page is not triggering in ALV
TYPE-POOLS : slis.
TABLES : mara,
         makt,
         marc.
DATA : BEGIN OF itab OCCURS 0,
        matnr LIKE mara-matnr,
        maktx LIKE makt-maktx,
        werks LIKE marc-werks,
       END OF itab.
DATA : t_fcat TYPE slis_t_fieldcat_alv,
       t_eve TYPE slis_t_event,
       st_line TYPE slis_listheader,
       t_list_top_page TYPE slis_t_listheader,
       t_list_end_page TYPE slis_t_listheader.
DATA : t_mat LIKE mara-matnr.
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : mat FOR mara-matnr.
SELECTION-SCREEN : END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_cat USING t_fcat.
PERFORM build_eve.
START-OF-SELECTION.
PERFORM get_data.
PERFORM build_header USING t_list_top_page[].
PERFORM build_footer USING t_list_end_page[].
PERFORM dis_data.
*&      Form buils_cat
      text
     -->TEMP_FCAT text
FORM build_cat USING temp_fcat TYPE slis_t_fieldcat_alv.
DATA : wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'Material'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Material Description'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Plant'.
wa_fcat-row_pos = 2.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
ENDFORM.                    "build_cat
*&      Form build_eve
      text
FORM build_eve.
DATA : wa_eve TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type           = 0
   IMPORTING
     et_events             = t_eve
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE t_eve INTO wa_eve WITH KEY name = 'END_OF_LIST'.
IF sy-subrc = 0.
    wa_eve-form = 'END_OF_PAGE'.
    MODIFY t_eve FROM wa_eve INDEX sy-tabix.
ENDIF.
ENDFORM.                    "build_eve
*&      Form get_data
      text
FORM get_data.
SELECT maramatnr maktmaktx marc~werks INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt ON
maramatnr = maktmatnr
INNER JOIN marc ON
maramatnr = marcmatnr
WHERE mara~matnr IN mat.
ENDFORM.                    "get_data
*&      Form dis_data
      text
FORM dis_data.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = 'ZALV_PRDS'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     it_fieldcat                       = t_fcat
     i_save                            = 'A'
     it_events                         = t_eve
   TABLES
      t_outtab                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "dis_data
*&      Form build_header
      text
     -->TEMP_LIST          text
     -->TTYPE              text
     -->SLIS_T_LISTHEADER text
FORM build_header USING temp_list TYPE slis_t_listheader.
CLEAR st_line.
st_line-typ = 'H'.
st_line-info = 'Material Info'.
APPEND st_line TO temp_list.
ENDFORM.                    "build_header
*&      Form build_footer
      text
     -->TEMP_LIST text
FORM build_footer USING temp_list TYPE slis_t_listheader.
CLEAR st_line.
st_line-typ = 'H'.
st_line-info = 'Dhwani Shah'.
APPEND st_line TO temp_list.
ENDFORM.                    "build_header
*&      Form top_Of_page
      text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_list_top_page.
ENDFORM.                    "top_Of_page
*&      Form end_of_page
      text
FORM end_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_list_end_page.
ENDFORM.                    "end_of_page
Reward Points if usefull
Regards
Fareedas

Re: Dynamic Action is not triggering in LSMW Recording

Hello All,
In SAP HRMS personnel actions if i do using LSMW Recording it is not triggering the dynamic actions.
Is there any mechanism to Trigger dynamic action in LSMW Recording ?
How to find the differences in process with and with out recording ?
Small help is also highly appreciated.
With Regards,
Sunil,
+91-9903695384.

Yes. Do one thing. First study the dynamic action. Try to understand what the dynamic action is doing. Is it creating data in other infotype or is it updating some other table. Once it is clear what the dynamic action is doing then you can try to implement the same logic in LSMW. In LSMW there is a provision to add more than one recording and this recording can be called based on some logic..
Thanks & Regards,
Sandip

OA Adapter not triggering in ESB but if the service is in BPEL its triggere

Hi All,
I have used Oracle Applications Adapter and choosen a Business Event in Ebiz API this is ESB. SomeTimes this ESB service is not triggered, when i did this in bpel its working fine can any one answer to this.
Thanks.

I suppose this is an ADF question. you might want to paste this @ JDeveloper and ADF in JDev and ADF forum to get speedier response.

BSP Terminating event not triggering

Hello Friends,
We have a scenario, where a BSP application is triggered from a Workflow, for a certain approval, and after the user clicks on Approve button on the BSP Page, the BSP would write to the workflow container using SAP_WAPI_WRITE_CONTAINER and then we call SWF_WSC_CALLBACK_LAUNCH.
This used to work, but after an almost Fatal incident with our system, we are not able to get this to work.
We can see in the workflow log that the container is written, but the terminating event is not triggered, and the workflow doesn't move forward
Is there a setting that we're missing..??
Thanks,
Tat.

Have you tried:
call function 'SAP_WAPI_DECISION_COMPLETE'

BulkEventResult Method Not Triggering in Postcreate Eventhandler

Hi All,
My Scenario is like this ...
When a user is created through Trusted Recon I wrote a PostCreateEventhandler to generate some field in OIM , for this in my Event handler I implemented BulkEventResult Method to trigger while a user is created through trusted Recon but BulkEventResult is not triggering . It's urgent requirement please help me .
Thanks in Advance..

order of you eventhandler should be between 1002 to 1008 or just FIRST or LAST as per requirement.
update order in eventhandler.xml and import it again. make sue you run Purgechache

BUS2032 - ALECHANGED event not triggering

Hi Gurus,
I have a issue in our dev system. In our system automatic PO creation is configured through Sales order.
This is working fine in Regression and production systems, but not working in Dev system.
I have compared the Regression and Dev system and I found that the ALECHANGED event is not triggering in our Dev system.
I have checked the Item Category of the Sales Order and it is same in both the systems.
And also I have checked all possible Workflow transaction(SWUE, SWEL, SWU3, SWU0, SWETYPV), everything looks same in both the systems.
Now I am not sure what to check and where to check.
Please let me whereelse/whatelse I have to check. Is there any ALE configuration to be checked.
Thanks for your help in advance.
Thanks,
Murali.

Hi Susan,
Thanks for the reply.
I know there could be some config missing but don't know what config it is.
There are more than 100 users in our Dev Systems, so I can't check the transports. It would be helpful for me if I get specific TCodes or areas so that I can compare my dev system with other systems where it is working fine.
Thanks,
Murali.

User_command is not triggering in Multiple ALV_LIST_DISPLAY

Similar Messages

Maybe you are looking for