QM-Error during MIGO(movmnt type-322)

I have done the UD stock moves to unrestricted.NowI am trying to revert material from unrestricted to quality in the same storage location by movement type 322 in MIGO transaction.
I am getting this error' change the inspection stock of material in QM only'
Pl. help.
Thanks & Regards,
Varun Kumar

Hi,
Reversing Stock Postings Locate the document in its SAP Library structure
1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
2. In the field for the movement type, enter
3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
4. Choose Enter to display the selection screen for the purchase order items.
5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
6. Save the goods receipt and exit the Materials Management component.
7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.
Also check the SAP note :  175842 for Transfer of Unres stk to QI stock.
Hope this will help you.
regards
radhak mk

Similar Messages

  • Customize delivery note during MIGO mov. type 541

    Hi, everyone.
    Pls. I need help because during MIGO mov. type 541, I need to print the delivery note just to accompany the materials.
    I can create/save the material doc. correctly, but when I save I have to customize the printout of delivery note.
    Thanks for tell me the step by step.
    Regards.

    Hi,
    Following are the general settings to take the printout of any materail document posted by MIGO:
    Go through these steps you can get the GRN Printout
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    Enter the local printer where you want to print your Goods posting document
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311,541 etcu2026 Maintain the Print item as 1--Material document printout
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

  • Error during MIGO-Error during maint. of delivery costs in master condition

    Hi
    We are getting error as below during MIGO against a PO with doc type NB:
    "Error during maint. of delivery costs in master conditions, Delivery cost conditions in different validity periods not identical"
    What might be cause??
    Thanks
    Maruthi

    Check the delivery conditions in condition tab of PO.
    Try to check if there are any delivery condition records mainatined.
    I think the problem is mostly due to overlapping validity period. Try to change the validity period for the same.

  • Error during MIGO - Urgent

    Hello all,
    While doing MIGO - 101 for plant 3800 , following error arises:
    Account determination for entry ICI BSX 3800 ___ 7050 not possible
    Any ideas?
    Regards,
    Aisha Ishrat
    ICI Pakistan Ltd.

    Hi,
    Account determination is done with a combination of Chart of accounts- valuation area-Material Type-Valuation  Class- Transaction event key.
    During MIGO for particular Valuation class and Transaction event Key BSX a GL account is determined.
    I guess in you case for material valuation class and key BSX no GL account is maintain.
    Either maintain Gl account for the combination or change the valuation class.
    Hope this helps.

  • Account Determination error during MIGO Posting

    Dear All,
    Kindly help resolve error duirng MIGO posting  "ACCOUNT DETERMINATION FOR ENTRY GBB____ZOB TF01 not possible".  This is Message no. M8 147. 
    The error happens once the transaction is being saved.
    Hoping for your positive response.
    Thanks and regards,
    ching

    Hi,
    Goto OBYC Transaction.
    Select the Procedure as ' GBB" and enter the Chart of Accounts ( for Your Company code)
    Enter the Valuation modifier as assigned to others.
    Enter the General modifier as ZOB
    Enter the Valuation class  ( with respect ROH/SFG others)
    Enter the Debit/ Credit G/L account
    save then proceed your transaction MIGO.
    rgds
    Chidanand

  • GL account blocked error during migo

    when i m doing the migo,during the document posting system showing following error msg.
    " G/L account 40100211 blocked for posting in company code 1000"
    when i m doing same bt vendor is diff.. then i not got any error msg...
    tell me what the solution for that?
    i hv cheked all by fs00..
    pls tell me how i solve this issue?
    Thanks & Regards
    Rekha Sharma

    Go to FS00, key in GL Account 40100211 and Company Code.  Click on EDit tab and untick the Block.
    If the issue is in Production client, please take the help of FI consultant.
    thanks
    G. Lakshmipathi

  • Error in MIGO Movement type 101 E is not planned.(Entry is not copied over)

    Hie Experts,
    I had created a process order for XYZ material. Now i want to assign this goods receipt to sales order. For this i am trying to go MIGO with mvt type 101 & special stock indicator as 'E'(order stock). I am facing the error as "Movement type 101 E is not planned. (Entry is not copied over)".
    Can anyone help to solve this error.
    Regards,
    Piyush

    Hie,
    Thanks for your valuable response. But, my scenario is like this. I am doing goods receipts against PRODUCTION Order.
    I want to take this stock as Sales order stock(Special Stock).
    Can u pl help me for this scenario.
    Regards,
    Piyush

  • Reg:Error during migo

    While doing migo i'm getting the below error
    "Excise invoice items are os different register types "
    Regards,
    vvk

    Hello,
    The items in MIGO, will be declared as Assets/tools/consumables and Raw materials.
    Please make sure that all should be of the same register types, ie Assets/tools/consumables (RG23C) and Raw materials (RG23A).
    Go to J1ID and check for the materials in the MIGO. All materials in the MIGO should be either declared as Assets/tools/consumables or all should be Raw Materials.
    Regards

  • G_COBL_CORE001 error during MIGO

    Dear All,
    As part of our customising requirements, we had created a derivation strategy, using Storage Location field, by a development that stores the Storage Location into the USERTEMP1 field provided in FMDERIVE.
    Now, when we run a MIGO (with a "K" and "<SPACE>" for Account Assignment Category and Item Category), we get the System error: Incorrect Customizing for field USERTEMP1, with the Message no. G_COBL_CORE001. The performance assistance says that the coding block should have this USERTEMP1 field and that there is no entry in TCOBM for this field.
    The procedure says that if USERTEMP1 is a user-defined field, then there is a need to check for field Customizing in OXK4, which in turn suggests addition of USERTEMP1 in the coding block table.
    We do not want to make changes to any tables in the system, more so because of the fact that this error comes only for "K" "<SPACE>" type PRs, and any table change has the potential to impact the other transactions that are succesful.
    Can the experts here kindly suggest me some possible steps to take to overcome this issue ?
    Thanks and Regards,
    Wy.

    Details of the error
    No commitment item entered in item 00010 FC1 24300000
        Message no. FI311
    Diagnosis
        The posted document contains at least one company code in which Funds
        Management, Cash Budget Management, or Project Cash Management is
        active. Therefore you must enter a commitment item in all involved
        company codes.
    Procedure
        Enter a commitment item.
        If you cannot enter a commitment item, check with your system
        administrator that your account assignment derivation is adjusted so
        that the system can automatically derive a commitment item from another
        account assignment, or from the G/L or cost element.

  • Error during MIGO

    Dear all,
    while doing MIGO for the PO i am getting following error
    "Check table 169P: entry PICT    does not exist
    Message no. M7001"
    In table 169P the entry PICT   is missing..
    PICT is my compnay code.
    Also  in GR Excise tab " BED,SED, AED  for excise item is zero. "
    But in PO in INVOICE tab against tax code system is showing the correct values of BED.
    wHERE Should i check for same.
    Best Regards,
    Venu

    Hi,
    Go to SPRO > MM > Logistics Invoice Verification > Incoming Invoice > Here configure following
    - Tax Treatment in Invoice Reduction
    - Maintain Default Values for Tax Codes
    - Configure How Exchange Rate Differences Are Treated
    - Configure How Unplanned Delivery Costs Are Posted
    - Edit PO Supplement Text in Invoice Verification
    - Activate Direct Posting to G/L Accounts and Material Accounts
    - Set Check for Duplicate Invoices
    And then check Table T169P, it will have aal the parameters mainatined for Invoice verification for compnay code. Then do MIRO.
    Aslo go to OBCL and mainatin input tax code of Zero % for compnay code.

  • Error during MIGO - about BED, SED, AED

    As PO Invoice tab is correctly showing me the taxes and values. Also i have maintained J1ID , during GR posting system gives me an warning message " zero BED. SED, AED values "
    Some details like
    Vendor is "100"
    Liable to Cenvat Credit.
    BED 16%
    AED 1%
    CESS 1%
    I have maintain Chapter id and other details.Just bit confused about the tax rate maintainance.so refering to above case  what conditions i should maintain in various J1ID details so that system will reflect all tax rates in GR also if the process flow is correct.
    In GR whats is the source of information related to taxes whether a tax code or J1ID or any other source.Or we have to maintaon the rates manually in excise duty tab of Excise Invoice.If so what values i should maintain ref to above case there.
    Thanks and Rgards,
    Deepika

    As you are using TAXINN
    the rates have to be maintained in tcode FV11
    for condition type JMOP and JAOP and for  combination of plant vendor material maintain 16 and 1 % respectively
    now u will be able to c this condition in your PO
    hope this will help u
    Reward Expected if issue solved

  • TOLERANCE KEY ERROR DURING MIGO

    Hi .,
    When i am doing a GR against a PO using Movement type 101 , i am getting the following error:
    " MAINTAIN TOLERANCE LIMITS  FOR TOLERANCE KEY VP FOR COCODE 0001"
    Now i have tried through the following navigation"
    MM-Purchasing ->Purchase order->set tolerance limits for price variance
    but there are only two tolerance keys (PE) and (SE). I am unable to copy to define a new tolerance key.
    Now, where should i be looking in the Navigation window for assigning/maintaining the Tolerance limits for Tolerance Key VP.
    I AM UNABLE TO DO A FORUM SEARCH FOR THE PAST TWO DAYS. EVEN A GENERIC SEARCH RETURNS A VALUE- NOT FOUND.
    ANY ISSUES WITH FORUM SEARCH FACILITY?
    Thank you all .
    Sri

    HI ,
    I just add this question , if we maintain VP as 0
    (Zero)  tolerance Moving avg. price variance, iam suspecting any change in Moving avg price will block the GR posting, could plz explain my understanding is correct or not.
    Plz reply Immediately.
    Thanking you,
    sudhakar

  • GLposting Error during MIGO

    hi...
    when i m duing the  migo,when i post the doc..then system showing following error msg.
    " G/L account 40100211 blocked for posting in company code 1000"
    when i m doing same bt vendor is diff.. then i  not got any error msg...
    tell me what the solution for that?
    Thanks & Regards
    Rekha Sharma

    hi,
    The g/l account might be blocked in that particular compnay code so you may be getting this error, for the other vendor it may be  different company code so you were able to post the doc in migo
    kindly check the status of the g/l whether it is blocked or not in FS00 trx.
    Regards,
    velu

  • Error During Changing accomdation typ of employee

    hi all,
    i m changing the group of an employee from OFFICER to EXECUTIVE using infotype '8' in tcode PA30 but problem is that when i m going to chenge accomdation type using infotype '581' then its showing an error 'No automatic updation for IT0008. Allowance Grouping not found' . can anyone please help me?
    Regards saurabh.

    Dear Saurab,
    IF Accomodation type is Rented Accomodation
    1) HRA WT should be assigned SHRA Tax Code in V_T7int9
    2) HRA WT should also be assigned to Allowance Grouping of employee in V_T7INA9
    3) IT 8 should be maintained for the period you are maintainng IT 581
    IF Accomodation type is CLA/COA
    1) HRA Wt shlould be assigned SCLA/SCOA accordingly in V_T7INT9
    2) HRA WT should also be assigned to Allowance Grouping of employee in V_T7INA9
    3) IT 8 should be maintained for the period you are maintainng IT 581
    Regards
    ...Sadhu

  • Storage bin error during MIGO

    hi freinds,
    system is displaying following error when i try to post a goods.
    "storage bin w10 902 we-zone does not exist (check your entry)"
    please advice how to proceed. do i need to check any config settings?
    regards,
    prasad

    HI friend,
    it solved my problem. thank you very much.
    as u said in lx20 i have selected my bin and executed. But what does that transaction do internally. If possible please explain in detail
    I want some notes on WM configuration,
    regards,
    prasad

Maybe you are looking for