QM Module master data

Hi, What are the master data in QM Module. Pls mention its importantance and t-codes?

hi
imparten t-codes
MM02/MM03 Change/Display Material Master
QS21 Create Master Inspection Characteristic- Qualitative/Quantitative
QS31/QS33/QS34 Create/Change/Display Inspection method
QS41/QS42 Create-Change/Display Catalog
QS51/52 Create-Change/Display selected set
QP01/ QP02/ QP03 Create/Change/Display Inspection plan
QDP1/QDP2/QDP3 Create/Change/Display Sampling Scheme
QDV1/QDV2/QDV3 create/change/display sampling procedure
QPV2/QPV3 Create / Display Sample Drawing Procedure
CT04 Create.Class Characteristics
CL02 Create a Class
-ashok
Edited by: ASHOK on Sep 15, 2008 5:03 PM

Similar Messages

Layout module master data sending to F&R system

Hi Friends,
When interface is sending layout module master data to F&R system, getting error message 'FRE_MD_LAYOUT_SEND PROCESSING DELTA E Sending release profiles - System Failure:' in FRE_UI t code.
When i am re-transmitting those backup files again error is coming 'Error during retransmission'.
When i debugged the program found out the file name format is not showing proper in SAP, the filename showing for layout module interface is '20120208204837', according to program it should be in .DAT format but in SAP not showing & file at OS level is in .DAT format.

Hi,
here is more detailled information. The error message is issued in function module FRE_LAYMOD_SEND. This function module is called by the re-send function module FRE_LAYMOD_RESEND only if there is data to send. That means the data within the backup file has been read successfully before!!! You can assume the error occurs in the system connection between ERP and F&R. (ERP tries to send the data but cannot send successfully due to some missing or erroneous settings within system connection.)
Let the system administration check the system connection settings.
As well have a look to the F&R Wiki page within SAP Community Network. Some documentation is about the system connection SAP ERP and SAP F&R. http://wiki.sdn.sap.com/wiki/display/SCM/SAPForecastingandReplenishment%28FRE%29
Kind regards,
Rainer

Function Module to send Vendor Master Data from SRM to ECC

Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

Hi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth

Function Module Call Via CMOD Logic for Master Data Enhancement

Hi Friends Please help me to resolve this, would really be very kind of all of you.
Requirement. I want to Enhance the field ZFACTREG from VIBDBE table in my datasource 0busentity_attr extract structure l_s_REIS_BUSENTITY_ATTR, I want to create the logic in CMOD exit_saplrsap_002 to call my function module for enhancement of master data. Please help me Step by Step
Thanks
Poonam Roy
<b>Step #1</b>
I put this code which gives me error in CMOD like this
ERROR : Das formale Argument 'OTHERS' muss am Schluss der Ausnahmeliste stehen.
ABAP Code#1 IN exit_saplrsap_002
DATA: l_d_fmname(30) TYPE c.
CONCATENATE 'Z_DS_' i_datasource(25) INTO l_d_fmname.
TRY.
CALL FUNCTION l_d_fmname
EXPORTING
I_DATASOURCE = I_DATASOURCE
I_UPDMODE = I_UPDMODE
TABLES
I_T_SELECT = I_T_SELECT
I_T_FIELDS = I_T_FIELDS
I_T_DATA = I_T_DATA
C_T_MESSAGES = C_T_MESSAGES
EXCEPTIONS
RSAP_CUSTOMER_EXIT_ERROR = 1
OTHERS = 2
IF FOUND.
IF SY-SUBRC <> 0.
RASIE RSAP_CUSTOMER_EXIT_ERROR.
END IF
CATCH CX_SY_DYN_CALL_ILLEGAL_FUNC.
ENDTRY.
<b>Step#2</b>
I simple created the Function module Z_DS_BUSINESS
and put the code in source code which gives me error . what should i put in other tabs like"Import", Export", Tables" i kept blank
ABAP CODE give me error : The Dictionary structure or table "FIELD-SYMBOLS" is either not active. i have to remove include in the FM. WHY SO??
FUNCTION Z_DS_BUSINENSS
""Lokale Schnittstelle:
*"       IMPORTING
*"             VALUE(I_DATASOURCE) TYPE RSAOT_OLTPSOURCE
*"             VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM
*"             VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE
*"       TABLES
*"              I_T_SELECT TYPE SBIWA_T_SELECT
*"              I_T_FIELDS TYPE SBIWA_T_FIELDS
*"              I_T_DATA
*"              C_T_MESSAGES STRUCTURE BALMI OPTIONAL
*"       EXCEPTIONS
*"              RSAP_CUSTOMER_EXIT_ERROR
INCLUDE ZXRSAU02.
WRITE: / 'INSIDE THE Z_DS_MEASUREMENTS PROGRAM'.
TABLES: REIS_BUSENTITY_ATTR,
        VIBDBE,
field-symbols:.<fs_REIS_BUSENTITY_ATTR> like REIS_BUSENTITY_ATTR.
DATA: BEGIN OF i_c_t_data OCCURS 0.
          include structure REIS_BUSENTITY_ATTR.
DATA END OF i_c_t_data.
DATA: i_c_t_data_copy like i_c_t_data OCCURS 0 WITH HEADER LINE,
      begin of i_vibdbe occurs 0,
      INTRENO like vibdbe-INTRENO,
      ZFACTREG like vibdbe-ZFACTREG,
              end of i_vibdbe.
i_c_t_data_copy[] = i_c_t_data[] = c_t_data[].
sort i_c_t_data_copy by vibdbe.
Select INTRENO
        into table i_VIBDBE from VIBDBE
        for all entries in i_c_t_data_copy
        where INTRENO = i_c_t_data_copy- INTRENO.
if sy-subrc = 0.
sort i_VIBDBE by INTRENO.
loop at i_c_t_data assigning <fs_REIS_BUSENTITY_ATTR>.
    clear: i_VIBDBE.
    read table i_VIBDBE with key INTRENO = <fs_REIS_BUSENTITY_ATTR>-INTRENO
    BINARY SEARCH
    transporting ZFACTREG .
    if sy-subrc = 0.
      <fs_REIS_BUSENTITY_ATTR>-ZZFACTORY = i_vibebe-ZFACTREG
    endif.
null

(I leave office until Monday morning, Europe time)
in include from customer-exit ZXRSAU01, etc.
CASE I_DATASOURCE.
WHEN '0CUSTOMER_ATTR'.
   PERFORM 0customer_attr changing i_t_data...
ENDCASE.
In each perform, doing what you wrote ; select (needed fields) from complementary-database-table into an internal table with a for all entries. sort the table. LOOP and MODIFY on i_t_data.
In some case i had to insert lines of i_t_data to an internal table of DS_structure when entering subroutine and back at exit. (on 4.6C PI 2003 if i remember)
Some optimization done when reading small tables (T001 society and the same, these are filled once and not for each packet of data.
Your idea of creating different FM is of interest, but the cost of passing i_t_data between two programs (two function groups) may overcome the gain of performance. In a job only one DataSource is processed so only one routine is actually called.
Regards.

Function modules for Master Data

Does anyone know of any function modules that can be used to
update master data, i.e. change attribute values.
Obviously it can be done without going through a MD load, because you can manually edit master data directly in BW, but I was wondering if anyone knows of any function modules available to do this ...
Thanks for you help.
Mark.

hi Mark,
take a look how to doc 'How to... update Master Data during upload of transaction data', there is sample code
https://websmp202.sap-ag.de/~sapdownload/011000358700002766042003E/HowToUplMasterDataTransact.pdf
you may need RSDDS_ATTRIBUTES_ACTIVATE to activate data.
hope this helps.
REPORT Z_UPLOAD_ATTR .
data: begin of custattr occurs 5000.
        include structure /BI0/MD_SOLD_TO.   "M-view
data: end   of custattr.
start-of-selection.
*fill internal table all values in internal format (e.g. leading zeros)
custattr-D_SOLD_TO = '0000006000'.
custattr-D_COUNTRY = 'US'.
custattr-D_INDUSTRY = '111'.
append custattr.
custattr-D_SOLD_TO = '0000006001'.
custattr-D_COUNTRY = 'CA'.
custattr-D_INDUSTRY = '222'.
append custattr.
call function 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
     exporting
          i_iobjnm               = '0D_SOLD_TO'
          i_tabclass             = 'M'
     tables
          i_t_table              = custattr
     exceptions
          attribute_name_error   = 1
          iobj_not_found         = 2
          generate_program_error = 3
          others                 = 4.

Function Module to change the master data attachments?

Dear Experts,
In SAP we can enclose the attachments for the Master data. Do we have any standard function module to change the Master data attachments.
Let me know if any?
Thanks and regards,
Reddy

Hi Reddy,
Please make use of function module :
BINARY_RELATION_CREATE_COMMIT
For detailed information on how to use the FM please see the thread below:
USE OF THIS fUNCTION MODULE
Regards,
Dilek A.

Importing master data from R/3 through functional modules

I am facing the below error when I try to import master data from R/3 through the inbound functional module /DMF/MDIF_PRODUCT_INBOUND to the PMR component (PMR - Promotion Management for Retail).
"Runtime error CALL_FUNCTION_NOT_FOUND has occurred"
Landscape - I have RTLDMF 1.1 and RTLPROMO 7.0 installed on top of Netweaver with EHP1 in a server which also has BI system. While the R/3 is present in another system.
Appreciate any help. Thanks!

Hi Khan,
You can create your own datasource source, by Tcode RSA2. In this link you find more information:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/28/4c553c42360a40e10000000a114084/content.htm
Also please check this link, that provides the steps to create/maintain the generic datasource:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
I hope it contributes.
Regards,
Sinara Moraes

Function module to retrieve the material master data

Hi all,
creating material master dta i am using BAPI_MATERIAL_SAVEDATA .is there any f.m with same structures as BAPI_MATERIAL_SAVEDATA to retrieve the materi master data.

Hi,
Not sure if there is any function module to get material master data with the same structure..
But..
You can select the data from MARA, MARC, etc...and convert it to the BAPI structures using the following function modules..
CFX_MAP2E_MARA_TO_BAPI_MARA
CFX_MAP2E_MARC_TO_BAPI_MARC
Thanks,
Naren

BAPI/function module to create/update vendor master data

Hi
We are on ECC 50 and have a need to update vendor master data through a programatic interface ( non-dialog ) with ABAP. What is a good function module that can be used to create/update vendor master data - I looked at BAPI_VENDOR_CREATE and did not find any input interfaces that can be passed to this BAPI.
Previous experiences with the right BAPI for this purpose that can be shared is appreciated. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 5:58 PM

Hi Kiran,
If you want to load the vendor data into sap its better to go with LSMW batch input program.
object 0040
method 0001
program name RFBIKR00
Program type B
this would be a good choice. Recently i did the same.

HR Master Data Use for other SAP Modules?

Which part of SAP HR Master Data can be used by various SAP modules including PP, SD, MM, PS, FI, etc?
Expecting expert input!

Which part of SAP HR Master Data can be used by various SAP modules including PP, SD, MM, PS, FI, etc?
Expecting expert input!
Hi
The following may be useful try this out
PP try this tcode and surf on HRMS-CR02 there u can bring the pernr to workcentre
SD Try T Code VPE1 and u can assign the sales personnel using pernr
MM Try T Code XK01 Create employee as vendor and u can use it for Vendor consignment goods via MSK3
FI In fi u can create vendor like mm using FK01 for bulk amount distribution
Hope it helps
with regards
partha

Need the name of the funcion module for master data planning

Hi all,
i need to know the name of the function module to call in a planning function in order to do a master data planning.
thanks a lot!

Hello Giancarlo,
You cannot do master data planning in BPS. Master data has to be maintained separately in the BW system.
Cheers
Aneesh

MDM for Managing Master data for PP & QM Modules

We have studied the various offerings of SAP MDM for Materials, Suppliers, Financials
These are definitely areas where we would like to automate using MDM and thereby improve Quality, Turn around Time and eliminate errors, redundancy etc.
In these areas we have also succeeded to a some extent in controlling the maintenance process by way of centralizing and building checks and controls in the Configuration of different Modules.
The main pain areas in terms of Master data have been in PP and QM Modules
PP- Maintenance of BoM and Recipe - which is based on process package finalized by R&D Section.
R&D scientists are not so familiar with SAP and SAP Settings
Process Package is usually a simple document- defining specific quantities of the different components required to produce a Specific quantity of a Product and also descibles the procedure of the entire production process, but when it translates into a Recipe and Bom- different tables in SAP come into play.
Eventually the BoMs and Recipes are created by manual input of information from the R&D Process Package
Similarly the QM master data - Inspection Plan in SAP - is based on Specification finalized by the Quality wing of R&D
R&D scientists are not so familiar with SAP and SAP Settings
Specification is usually a simple document defining the different tests to be performed for inspecting a material and the expected range in which the results should fall in order for the material to be accepted- but when it translates into a Recipe and Bom- different tables in SAP come into play.
Eventually the Specifications are created by manual input of information from the R&D Process Package
There is no direct relation between the original R&D Document and the SAP Master data- Verification is a laborious manual process.
We are wondering whether SAP MDM would have the scope to cover these two areas
Tks

Hi Hari,
If I understand correctly,you are doing a feasibility study about and trying to find out if standard offering in SAP MDM supports your requirement of linking the master data and R&D documents.
If thats the case I guess you can design a solution based on your business requirement.For this you can either create a custom repository or extend the currently offered standard business content.You can link the documents to the master data,also store these as pdf/image/links etc.
Thanks,
Ravi

Archiving and deleting of equipment master data in plant maintenance module

Hi,
Can anyone explain me the process to archive and delete the equipment master data in PM module using archiving tools.
I tried doing it thru t-code SARA, would be grateful if anyone can help me with the steps to follow to archive the equipment master data.
Thanks in advance,

Many thanks for your reply,
I tried doing the same in IDES, but unfortunately the archive file is not getting generated when i write it. I have clearly specified in the variant to create an archive file. Can you please explain how does the system generate an archive file. And also in the customizing " Archiving Object-Specific Customizing " techincal settings, i have maintained the production variant and have marked start automatically.
Please advise,
thanks again ,

Function module Vs BDC for master data upload

Hi ,
Please advice we should use the following function modules for master data upload or we should go for BDC.
MP_RFC_SINGLE_CREATE
MP_RFC_INACT_CHANGE
MPLAN_CREATE
MPLAN_CHANGE
MPLAN_SET_DELETION_INDICATOR
ASSET_MASTERRECORD_MAINTENANCE
MPLAN_ITEM_CREATE
MPLAN_ITEM_CHANGE
GL_ACCT_MASTER_SAVE
GL_ACCT_MASTER_SAVE
GL_ACCT_MASTER_SAVE
Actually, we have already used these function modules in our upload program, but we are not sure if these function modules will create any data inconsistency.
Please let me know, if we should continue using the FMs, or there is any risk using the FMs and we should replace them by BDC.
Thanks in advance.

HI Vikram,
Better to serch for the BAPI for uploading the master data.Becuase we have problems with BDC and FM's.
If you use FM's it does n't contain all the fields which you want.IF you go for BDC this is not maintainable for future releaseas.IF you upgrade then screen may change.
IF don' have any BAPI then better go for BDC.
Thanks

R/3 Master Data Extraction from Function Module

Hi Experts,
I need to extract R/3 Master Data (Attr & Text) using function Module.
It is already developed and in Live system,I need to extract Master Data for 3 more attributes.
Could you please specify detailed steps on how to proceed wit this once i made changes to Function Module (ABAP Code),Extract Structure...how shall i proceed once this is done.
Thanks

Hi,
Check the following,
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
FI-CO 'Data Extraction -Line Item Level-FI-CO'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Please reward for the same.

QM Module master data

Similar Messages

Maybe you are looking for