QM report acceptance and rejection

Hi Experts
Is there any standard report, which will have give me out put accepted quanity and rejected quanity from qm UD posting. Can we establish link between these two quanity and the GRN-PO concerned?
Regards
SAM

Hi,
Guess the below reports meets your need,
MCXB, MCXD, MCVB, MCVD.
To link back to GRN-PO to my knowledge there is no std report for the same.
Regards,
vivek

Similar Messages

Different stock value for accepted and rejected material in quality

Hi,
when we send the final product in quality ,some material has accepted and some material has rejected
But system is showing the value of both accepted and rejected same.
But we want that the value for both should be different.
How we can get it
Regards
Prem

It is not possible to valuate differently for accepted and rejected material.
The value for material in PO for total material. So it should be same value for both.
Regards
Ravi

Please help me find out my code..I am using msg ACCept and Reject

Please anyone help me...
I am using MSG ACCEPT and REJECT...
but my code when I execute it...it keep show out MSG REJECT...
Please help me...Thanks a lot....
public class Addmission
public static void main(String[] args) throws Exception
char Message;
double GPA = 3.0;
int ATS = 60;
int ATScore = 80;
System.out.println("Enter your Grade Point Average");
GPA = (char)System.in.read();
System.out.println("Enter your Addmission Test Score");
ATS =(char)System.in.read();
System.in.read(); System.in.read();
if(GPA >= 3.0 && ATS == 60)
System.out.println("Accept");
if(GPA <= 3.0 && ATScore == 80)
System.out.println("Accept");
else
System.out.println("Reject");

I need to do like... but my code doens't show msg "Accept" it keep going to show "REJECT"
Could anyone help me out?
Print the msg "Accept" if the student has any of the following:
* A grade point average of 3.0 or above and admission test score of at least 60
* A grade point average of below 3.0 and an admission test score of at least 80.If the student doesn't meet either of the qualification criteria, print "Reject"
public class Addmission
public static void main(String[] args) throws Exception
char Message;
double GPA = 3.0;
int ATS = 60;
int ATScore = 80;
System.out.println("Enter your Grade Point Average");
GPA = (char)System.in.read();
System.out.println("Enter your Addmission Test Score");
ATS =(char)System.in.read();
System.in.read(); System.in.read();
if(GPA >= 3.0 && ATS == 60)
System.out.println("Accept");
if(GPA <= 3.0 && ATScore == 80)
System.out.println("Accept");
else
System.out.println("Reject");

An MIC is accept and reject at the same during result recording

Hi,
If I have a checked sign on both of the Acceptance checkbox and Rejection checkbox (status:2, and valuation: yellow thunder sign icon) during QE51N, what does it mean in term of result recording, defect, and notification, and usage decision?
I am stuck as I don't know how to treat this MIC.
thanks
YY

Hi Herment,
There is no such message you mention and the system allow me to save with status 2. However, the valuation field display a Yellow Lightning icon.
Now that I press the lock button (i.e. close) and clicked the save button, the system does not allow me to make any changes to this MIC, and which means there are two check sign on the Accept and Reject checkboxes now.
How to deal with it?
Thanks
YY

QA11 - Accept and Reject UD

Hi Experts,
Out of 10 qt y if I have accepted 4 and Rejected 6, what UD should I give.Is there any possibility of giving 2 UD'S for the same material for Rejection and Acceptance
Regards,
Sri Devi

Hi
We have faced same issue for assigning the qulaity score where
Venor A: supplied 100 materials and accepted 15 materials, Score = 10
Vendor B : supplied 100 materials and accepted 20 materials,Score = 10
But we must also consider that our ultimate aim is to reduce the Inspection at the same time we should have vendor which will have best quality.So we want "Rejection Zero",but here we are talking about out of 100 only 10 or 15 are accepted.
which says both are same culprict.rejection is rejection ,10 or 20,should be treated same.
neverthless this can only solved by multiple UD codes & there no other solution.
Regards
Sujit

Quality Accepted And rejected.

Dear Experts
how to get the in term of Quality within a specific day
Material Which is coming From VENDOR:-
how much material is accepted BY QC and how much qty is rejected on that particular Date.
Rgds
Pankaj Agarwal

Dear Pankaj,
Check for the material document in T code MB51 for the movement type's 321 for accepted that 's from
quality to unrestricted and 122 for sending back to the vendor if not ok,the other cases are putting it in the
blocked stock for 350.
But i'm sure whether will you be able to shortlist vendor wise or not.
Regards
Mangalraj.S

Automatic Accept or Rejection for Copy Inspection Result setting?

HI Sir,
Control in Insp. Lot - Automatic Data Transfer at Sample Calculation.
Control in RR - Automatic Data Transfer When accessing Results Recording
Close - Make Tick mark
Origin TL - No setting
DatOrig.RR - 02
Selection - 300
Mapping - 200
Log - Make Tick mark
above settings has done
Results also copied .
But I want copy Accept And Rejection .
This is possible? Give me the suggestion
Regards,
Naresh Reddy Nandi

Hi,
Acceptance or rejection varies for every lot. You can't cope the accept or reject while accessing the results recording. Thanking you.

Report on Quality Rejection

Hi
I am having a material and I am Doing MIGO against the PO
Then due to quality reasons I am sending back to vendor
If I want make a report on material rejection report based on quality
How can I do this
NK

In this case you should use Tables MKPF and MSEG.
Else add field Reason for Movement in report MB51, in path SPRO > Inventory Management and Physical Inventory > Reporting > Define Field Selection for Material Document List > Here add RM07DOCS / MSEG / GRUND and activate selection and output indicator.
And try to use, it will suffice your requirement.

Podcast was accepted, then rejected 9 weeks later. Why?

About nine weeks ago, I submitted my podcast to iTunes. It quickly was accepted, and it was even featured in the New & Noteworthy section of the Tech category all along.
Podcast Name: Let's Talk Jailbreak
Feed URL: http://idownloadblog.libsyn.com/rss
Then on Tuesday, out of the blue, I received an email from Apple saying my podcast hasn't been included in the podcast directory. After doing a quick troubleshooting, it appeared the feed had a very small problem, which apparently wouldn't even be a problem for iTunes. We fixed the small error anyway.
Since the rejection had started after Episode #9, which was titled "Like Justin Bieber says...", we thought that having "Justin Bieber" in the title could be a problem too so we changed the title to something different, and resubmitted the podcast.
I also replied to the email I received from Apple saying the podcast was rejected, telling them we had made some changes to fix the feed and changed the title.
I haven't heard back from them and I am wondering if the whole topic of our podcast could be the problem.
Our podcast is called "Let's Talk Jailbreak" and focuses on everything jailbreak. We do not endorse or even talk about app piracy. We just talk about jailbreak applications released for iOS devices. My blog, iDownloadBlog.com, is undeniably the best blog on this topic, and our podcast was just an extension of the blog. The podcast was downloaded over 30,000 times per episode, and was professionally produced. It also had 85 ratings in iTunes, most of them 5 stars.
From your experience, do you think Apple could have removed our podcast because we talk about jailbreaking?
I look forward to hearing your thoughts. We were having so much fun doing this podcast. Apple's unexplained decision really is a downer, especially because they don't give us any hint as to why the podcast was rejected all the sudden.

Having the name "Jailbreak" in your podcast is what got it removed.
Change the title / description / tags to remove any mention of the word "Jailbreak" and then you should be able to get it back in.
email me rob (at) libsyn (dot) com for more info.
Regards,
Rob W

Crystal Reports 2008 and Postscript

Hello,
I think I have to start a new thread for this. Originally I described the problem here:
Printing Crystal Report to Postscript
Now we upgraded our Crystal Reports for Visual Studio 2005 to the latest version - CR 2008 SP0. We had purchased the full version to be able to print the postscript files correctly, without any prompts for the file name, because I've read that this was a bug in the old versions, but it had been fixed. But I still cannot do this.
I'm trying to print my reports to the postscript file:
PrinterSettings ps = new PrinterSettings();
ps.PrinterName = "TRADEPOSTSCRIPT";
ps.PrintFileName = txtPath.Text.Trim() + "
" + txtFormNo.Text.Trim() +
".ps";
ps.PrintToFile = true;
rpt.PrintOptions.CopyFrom(ps, ps.DefaultPageSettings);
rpt.PrintToPrinter(1, true, 0, 0);
I'm still getting prompt for the file name.
This doesn't make any sense - the path and file name are specified in my code. The whole project will be useless for us if the users will be getting prompts.
Could you please help me how to solve this issue?
Thank you,
Peter Afonin

Hi,
I am trying to print and specify a filename to a postscript printer as well. However, my version of crystal reports in Visual Studio 2008 does not come with this method....
reportDocument.PrintToPrinter(printerSettings, pageSettings, True) ?
I have checked and there does not exist an overloaded method in the object browser for this 'PrintToPrinter' method that would accept PrinterSettings object??
The only method I have is as below:
===============================
public virtual void PrintToPrinter(int nCopies, bool collated, int startPageN, int endPageN)
Member of CrystalDecisions.CrystalReports.Engine.ReportDocument
Summary:
Prints the specified pages of the report to the printer selected using the PrintOptions.PrinterName property. If no printer is selected, the default printer specified in the report will be used.
Parameters:
nCopies: Indicates the number of copies to print.
collated: Indicates whether to collate the pages.
startPageN: Indicates the first page to print.
endPageN: Indicates the last page to print.
===============================
My version is Crystal Reports Basic and is what comes with VS 2008 (not upgraded):
From the GAC:
CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0
FileVersion: 10.5.0.1943
.NET FRAMEWORK v3.5 SP1
Please help.
Thanks,
EM

Calling a Crystal Report from and Oracle Form6i

I am attempting to call a crystal report from within an oracl form. I would appreciate documentation/suggestions on how to accomplish this task.
Thanks
NBranson

HI Nicole,
I have used crystal reports from oracle forms in one of my project. Send a mail to this address, i ll reply you back with the source code. My email address is [email protected] .
But if you just want to know the steps here it is :
STEPS TO display the Crystal Report in Oracle Forms :
1. Create a new form.
2. Create a control block, name it 'CONTROL'.
3. Create a CONTENT canvas, name it 'REPCAN'.
4. Create an ActiveX control on the canvas, name it 'CrystalReport1'.
5. Create a Image item , name it 'REP'. Make sure that image item overlaps the ActiveX control completely, this image item is used to get the item handle. Enlarge this object such a way that it will fit the window, the report gets displayed in this item so the item size should be adeqately large.
6. Right click on the ActiveX control item, select Insert Object from the menu.
7. From the list select Crystal Reprot Control.
8. Select the Progrm=> Import OLE Library Interface Menu in the form.
9. Select Crystal.CrystalReport from the List, this will list two methods and one Event . The two methods are CrystalCtrl and IRowCursor, the event is CrystalReprotEvent.
10. Select all the three and click on the OK button to accept. This will create the program units.
11. In the When-New-Form-Instance trigger of the form write the following code.
Declare
     charWinHandle varchar2(50);
     numWinHandle Number;
Begin
     Set_Application_Property(Cursor_Style,'BUSY');
     charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
     numWinHandle := To_Number(charWinHandle);
     :Item('Control.CrystalReport1').OCX.Crystal.CrystalReport.WindowParentHandle := numWinHandle;
     :Item('Control.CrystalReport1').OCX.Crystal.CrystalReport.WindowState := 2;
     :item('CONTROL.CRYSTALREPORT1').OCX.Crystal.CrystalReport.Connect := 'DSN=;UID='||Get_Application_Property(UserName)||';pwd='||Get_Application_Property(password)||';dsq=;';
     Crystal_CrystalCtrl.ReportFileName (:Item('Control.CrystalReport1').interface,'C:\Sample_Rep.Rpt');
     Set_Window_Property(Forms_Mdi_Window,Window_State,Maximize);
     Set_Window_Property('MAIN',Window_State,Maximize);
     :reptitle := 'Report Preview Window';
     numWinHandle := Crystal_CrystalCtrl.PrintReport(:Item('Control.CrystalReport1').interface);
     Set_Application_Property(Cursor_Style,'DEFAULT');
End;
One thing to mark here is the, change the report name and path according to your required file name and path in
Crystal_CrystalCtrl.ReportFileName (:Item('Control.CrystalReport1').interface,'C:\Sample_Rep.Rpt');
12. If you want to run multiple reports then create a parameter and pass the file name to the form through the parameter. In the above line of code, you can replace the file name with parameter, so each time the form is called with different parameter with the file name , it displays different reports.
13 Run the Form.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

CR XI R2: Crystal Reports freezes and crashes when I try to open a report

I added this question as a Reply to a message by nic2deep a month ago <Crystal Reports freezes every time I try to open a report.>, but got no response so I thought I'd try again on my own.
I have 2 laptops with CR XI installed (same problem from original R2 through SP 5). The old laptop is an IBM Thinkpad R51. The new one is an HP Elitebook 6930p. Both have the exact same software and versions of Win XP and network security.
If I try to open a report that has an "invalid printer" selected, it will open in the old IBM (with the message, 'This report uses an invalid printer. The default printer will be used instead'), but on the new HP, it freezes and I have to do a CtlAltDel to get out.
I've tried everything Don Williams suggested to nic2deep:
1) Open Contol Panel and add/remove programs and select CR. Do a repair install and if possible use the Custom Options and install all DB drivers and Export options, except Lotus Notes, unless you' re using them.
Results: Tried many times with no effect.
2) It may be that your firewall setting or anti-virus software is blocking access to system files or resources. When you do the repair install make sure to disable them and un-plug yourself from the network so you protect your PC while they are off line.
Results: Firewall was always OFF because network security handles all that. Can't turn off anti-VIrus, but both computers have the same antivirus system anyway.
3) Look in the System and Application Event logs in Admin tools; it may give you a clue what your PC is trying to get to and being denied.
Results: The only thing that is logged in Admin Tools when this happens is a "Security/Privilege Request" with no errors.
Clearly, when CR in the HP looks for the printer selected in the report and doesn't find it, that causes CR to freeze.
Any idea what difference between the 2 machines could cause this? Something in the Registry?
This is a royal pain, because I can only be on one computer at a time.
Thanks in advance.

Hi Debi,
Because in CR XI R2 it is WYSIWYG meaning we use both the display and the printer drivers to render the report. Same as what PDF does. If we can't find the printer the report was designed against, and all the placements of each object is dependent on the printer when designed, we have to default to your default printer to be able to calculate internally when to render the report objects and format the layout thus the message from CR indicating so.
Basically CR dynamically builds the page layout dependent on the local system. Also the reason why CR requires a default printer to be installed, if it's not then we use Microsoft's Generic Print driver. It's not that reliable either but we have to use something.
And another "for your info" is the same for our database drivers. Example, if you create a report off of MS SQL Server and then you want to view the SQL CR generates you need to log on first. This way CR can query the DB client and generate the SQL according to the DB. If you just want to see the SQL you could just set location to Access, problem with this is because CR dynamically generates the SQL according to the DB you set lcoation to we may change the SQL Statement and not actually show you what the report uses when connecting to the real database.
One of the side effects of supporting so many DB's and Printers and Video drivers. Sometimes drivers do non-standard functionality which CR did not anticipate or code on how to handle.....
This all changed in CR 2008, we are not as dependent on the printer driver but this created a whole new set of problems if you hadn't noticed from all the Printer problems posted.... But we are going back to the CR XI R2 printer functionality model to resolve all of the issues....
Thanks again
Don

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

Crystal Reports 9 and SQL Server 2005 default parameter values

We're using Crystal Reports 9 and upgraded from SQL Server 2000 to SQL Server 2005.
I'm noticing a very weird problem which I wonder if anyone else has experienced (and hopefully found a resolution for). It appears that in using Crystal with SQL Server 2005 stored procedures, if we have default parameter values in the stored procedures, the default parameter values get completely ignored if you pass in a NULL value from Crystal!
For example, if you have a stored procedure that begins like this:
ALTER Procedure [dbo].[StoredProcedure]
@Param1 VarChar(200) = '',
@Param2 VarChar(200) = ''
AS ...
both @Param1 and @Param2 have a default value of an empty string, and therefore should become empty strings if nothing (NULL values) gets passed in for them.
But, like I said, what I'm finding is that with Crystal calling the stored procedure with NULL @Param1 and @Param2 values, they never become empty strings, but rather remain as NULLs.
This was never a problem with SQL 2000.
Very perplexing. Anyone else every experience this?
Thank you.

Please ignore my earlier post -- answered my own question.
NULL parameter values do not get replaced by default values in SQL -- that is normal behavior in both SQL 2000 and SQL 2005. Just goes to show, that no many how many years programming experience you have, you can still get tripped up sometimes : (

QM report acceptance and rejection

Similar Messages

Maybe you are looking for