QUANTITY MULTIPLIES BY 9 ON REPORT

Hi...
I am doing a very basic PO report where I have the order number, line no, quantity and unit price.
I have got the quantity and unit price at detail level but when I run the report I get repeated 9 lines displayed for each order.
If I set the unit price and quantity at sum level then I get one line displayed but still times the quantity value by 9.
can anyone please help?
Thanks

Hi
Somewhwere there is a join that is either not meant to be there or there are genuinely nine entries per PO Line per Discoverer folder in your database.
I would first of all try extracting the SQL and running it in SQL Plus to see what answer you get from the database without running Discoverer. If you get the same answer then you know that the issue is not with Discoverer but with your database.
If you get the right answer in SQL Plus then the issue lies with Discoverer. It will be either the way the business area has been put together or the way the workbook has been together. You either need to adjust the EUL or add extra constraints to the worksheet.
You could also try hiding duplicate rows.
Best wishes
Michael

Similar Messages

There is double quantity in the sales item report?

Hi all,
I have created an infoset with sales order item and delivery
The issue is
there is one sales order item with qty 10 but because it was delivered on different dates with different quantity like 5,5
the report show likes
sales order item                            quantity                  delivered quantiy   act gds issue date
10                                                 10                             5                        20/09/2010
10                                                  10                            5                        21/09/2010
result                                              20                           10
but the actual quanity should only be 10 but the result it is sumarizing as 20 because there are 2 line items for the same
how to rectify and summarise it
thanks

Hi,
Check this blog on your topic. It explaines exception aggregation in detail.
Infoset Keyfigure multiplicity Part 3
Infoset Keyfigure multiplicity Part 1
Infoset Keyfigure multiplicity Part 2

How to select multiple row in ALV report

Hi friends,
1. How to select multiple row in ALV report
               ( How to set tab in ALV report and want to select multiple line.)
Thanking you.
Subash

Hi Sahoo,
If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
in layout structure you will find field SEL_MODE
pass :
LS_LAYOUT-SEL_MODE = 'A'.
In PAI.
CALL METHOD GRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = T_ROWS
      ET_ROW_NO     = T_ROWID.
Hope these will solve your problem.
Regards,
Kumar M.

Passing multiple parameters between two report portlets on the same page

Hi,
I want to pass multiple parameters between two report portlets on the same page.
I have been succussful passing a single parameter between two portlets. The
following are the steps :
(1) Created first report based on the query
SELECT htf.anchor('http://192.168.0.84:7778/servlet/page?&_pageid=97&_dad=portal30&_schema=portal30&_mode=3&dept_code='||DEPTNO,DEPTNO) Department, ename FROM EMP;
(2) Created 2nd report
select * from EMP where DEPTNO = :dept_code
(3) Added pl/sql code before display page on the 2nd report
portal30.wwv_name_value.replace_value(
l_arg_names, l_arg_values,
p_reference_path||'.dept_code',portal30.wwv_standard_util.string_to_table2(nvl(g
et_value('dept_code'),10)));
(4) Created a page and added these reports as portlets.
Sofar it works fine for one parameter (deptno) . Now I want to add one more
parameter say empno to my first report query and would like to pass both the
parameters deptno and empno to the 2nd report. Please tell me how to pass multiple parameters ?
Thanks
Asim

Hi,
You will have to do the same thing
The select will be like this
SELECT htf.anchor('http://toolsweb.us.oracle.com:2000/servlet/page?_pageid=97&_dad=mb&_schema=mybugs&_mode=3&dept_code='||DEPTNO||'&empno='||empno,DEPTNO) Department,ename
FROM EMP
In the additional plsql code do the same for empno like this
mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.dept_code',mybugs.wwv_standard_util.string_to_table2(nvl(get_value('dept_code'),10)));
mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.empno',mybugs.wwv_standard_util.string_to_table2(get_value('empno')));
Thanks,
Sharmila

Date range to be displayed & Displaying multiple values on the report

Hi,
I have date range parameters, but I also need it to be displayed it on the report. Is there any way I can display it. E.G If a parameter is created one can drag and drop it on the report if it needs to be displayed on the report, I tried to do the same for the date range parameter but it does not work.
Also If a parameter is created by selecting the option 'Allow Multiple Values', and if you drag and drop it on the report only the first value is displayed and the rest does not show. Has anyone tried this before and been successful in displaying multiple values in the report.
Thanks in advance.

Hi,
A multi-value parameter is actually treated as an array in Crystal Reports.
To display the values selected in the parameter, create a formula from the Field Explorer and type this code:
Join({?ParameterName},",");
Place this formula on the header or the footer sections of the report.
Regarding the date range issue, please follow Sastry's advice and it should work fine.
Make sure you're using the parameter in the Minimum and Maximum functions. For eg: If I was to create a date range parameter called OrderDate, my formula to show the start date would look like this:
Minimum({?OrderDate})
-Abhilash

Detail Information to show in multiple areas of a report

Post Author: Theresa Rose
CA Forum: General
I need detail information to show up on multiple areas of a report that I am working on.There are different areas on a form that I am working on that require multiple lines of detail information. I have tried using a subreport, but when it goes to a second page it doesn't show the correct detail information.

Ok, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx!

Detail information in multiple areas of a report

Post Author: Theresa Rose
CA Forum: Crystal Reports
I need detail information to show up on multiple areas of a report that I am working on.There are different areas on a form that I am working on that require multiple lines of detail information. I have tried using a subreport, but when it goes to a second page it doesn't show the correct detail information.

Thanks Gupta.
Please let me know if this BI WAD command is available in 3.5 also or in just 7.0. we are in 3.5 now. if it is 3.5 as well, can you please tell me how to get there.
Thanks
Krishna

OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

Exclude:
you Can exclude columns in either Table view or pivot table view by placing those columns in Excluded section but you will notice that it will appear in bi server parsed sql query.
Not sure you were asking about runtime??
would you please explain your question!!
Thanks
NK
Edited by: DNK on May 8, 2013 9:48 PM

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

Is there a way to link the x-axis of multiple graphs in a report? Using DIAdem 12.0

Is there a way to link the x-axis of multiple graphs in a report? Using DIAdem 12.0

What I am after is this... If I have multiple 2D axis systems in a report with each y axis showing different channels of a particular data file and with each x axis being the time stamp of that data file, rather than changing the x axis values of each 2D axis system to zoom in on a time slice, I'd like to change only one and have all the others match. So I suppose yes, I want each of the multiple 2D axis systems to have the same x axis, but I want unique 2D axis systems, not one system with multiple y axis or "n systems". I'm hesitant to post a sample report as this is a public forum. Thank you.

Quantity Variable No. On BackOrder Report

Hi Experts,
I want to show the quantity on Sales Back Order Report PLD(Sales A/R ->Sales Report -> BackOrder). Please suggest how can i do this ? Which variable no cintain the info about quantity .
Thanks & Regards

Hi Om...........
if you refer the system defaul PLD then you can get the variable no. But its already there in ordered and delivered column.
Regards,

JRC - multiple tables in crystal report

Post Author: Crystal Wong
CA Forum: JAVA
Hi, I am using the Java Reporting component of Crystal Report XI R2 SP2. I encounter error when pushing 2 Java resultset to a report as a datasource, like the code belows, ReportClientDocument reportClientDoc = new ReportClientDocument(); reportClientDoc.open(REPORT_NAME, 0); String query1 = "SELECT COLUMN1, COLUMN2 FROM TABLE1" ;ResultSet resultSet1 = getResultSetFromQuery(query1, ResultSet.TYPE_SCROLL_INSENSITIVE); String tableAlias1 = reportClientDoc.getDatabaseController().getDatabase().getTables().getTable(0).getAlias();reportClientDoc.getDatabaseController().setDataSource(resultSet1, tableAlias1 , tableAlias1); String query1 = "SELECT COLUMN1, COLUMN2 FROM TABLE2" ;ResultSet resultSet2 = getResultSetFromQuery(query2, ResultSet.TYPE_SCROLL_INSENSITIVE);String tableAlias2 = reportClientDoc.getDatabaseController().getDatabase().getTables().getTable(1).getAlias();reportClientDoc.getDatabaseController().setDataSource(resultSet2, tableAlias2 , tableAlias2); I wanna to ask, Does JRC support multiple tables in a report with the approach suggested above? Thanks a lot!

Post Author: Crystal Wong
CA Forum: JAVA
Finally, I decided to use a join SQL or SubReport to do it.SubReport can support multiple pushing of ResultSet.

How to pass an array or structure, in addition to a query, or multiple queries to the Report Builder as parameters

Is there a way to pass an array or structure for example as parameters, in addition to a query, or multiple queries to the Report Builder in CF8? I believe this was recommended by users to be in CF8.

BrianO,
Although it's been a while, I thought I'd provide the code to do this for you. It works for me in CF8, and probably will in CF7.
Here I create a structure called My, and provide that one parameter to my CFReportParam tag.
<CFSet My = {
Client = "Client Name",
ReportDateFrom = DateFormat(ThisStartDate, DateMask),
ReportDateTo = DateFormat(ThisEndDate, DateMask),
PageHeaderImage = ImagePath & "\Logos\Page_Header.png",
WatermarkImage = ImagePath & "\Logos\Watermark.png",
GetBarSummary = GetBarSummary,
GetPieSummary = GetPieSummary
}>
<CFReport Template="#ReportPath#\SpendSummary.cfr" Format="PDF" Query="GetSummary">
<CFReportParam Name="My" Value="#My#">
</CFReport>
Inside the report itself, reference the given parameter as Param.My.PageHeaderImage for example. It can be referenced that way from any expression inside the report builder. You can even use the queries as the data source for charts (using the Data From a Query -> Query Builder -> Advanced) by entering "Param.My.GetPieSummary" where it says "Variable containing query object".
HTH
Swift

Multiple selection in interactive reports

hi,
how can we do multiple selection in interactive reports using check box?
my first list will have a list of account numbers along with the check box. if few check boxes are clicked then the other fields from the table for the checked account numbers . kindly help me with this.

Hi,
REPORT zbcd .
data : BEGIN OF ITAB OCCURS 0,
        VAR1(4) TYPE C,
        VAR2(4) TYPE c,
       END OF ITAB,
       LINE1 TYPE I,
       VAR3(4) TYPE C,
       VAR4(4) TYPE C,
       FLAG TYPE C,
       CURRENT TYPE I.
data : BEGIN OF WA OCCURS 0,
       XYZ(100) TYPE C,
       END OF WA.
MOVE: '1234' TO ITAB-VAR1,
      'ABCD' TO ITAB-VAR2.
APPEND ITAB.
MOVE: '5678' TO ITAB-VAR1,
      'EFGH' TO ITAB-VAR2.
APPEND ITAB.
MOVE: '9999' TO ITAB-VAR1,
      'IJKL' TO ITAB-VAR2.
APPEND ITAB.
SET PF-STATUS 'BUTTONS'.
*HERE PF-STATUS CONSIST OF PUSHBUTTON WITH USERCOMNAD 'DISP'.
LOOP AT ITAB.
WRITE: / FLAG AS CHECKBOX, ITAB-VAR1, ITAB-VAR2.
ENDLOOP.
DESCRIBE TABLE ITAB LINES LINE1.
REFRESH ITAB.
CLEAR ITAB.
CURRENT = 0.
CLEAR: VAR3, VAR4.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'DISP'.
DO LINE1 TIMES.
CURRENT = SY-INDEX + 2.
READ LINE CURRENT LINE VALUE INTO wa.
IF wa-XYZ(1) EQ 'X'.
WRITE: wa-XYZ+2(4) TO VAR3,
         wa-XYZ+7(4) TO VAR4.
WRITE: VAR3 TO ITAB-VAR1,
         VAR4 TO ITAB-VAR2.
APPEND ITAB.
ENDIF.
ENDDO.
ENDCASE.
THEN U SECONDARY LIST VALUE SELECTION TAKES PLACE
SELECT * FROM MARA INTO TABLE ITMARA FOR ALL ENTRIES IN ITAB WHERE MATNR = ITAB-MATNR.
LOOP AT ITMARA.
WRITE:-----FIELDS TO BE DISPLAY IN OTHER LIST...
ENDLOOP.
*NOTE :-1.PLEASE EXECUTE ABOVE PROGRAM WITH OUT CHANGES IN DEBUG MODE TO CLEARLY UNDERSTAND.
2.ALSO U CAN MOVE ABOVE ITAB REQUIRED FIELD VALUES INTO ONE OF INTERNAL TABLE(BY LOOPING) WHICH IS LIKE SELECTOPTIONS MARA-MATNR(ie TB_MATNR) AND USE*
(AND INSTEAD OF VAR1 AND VAR3 U CAN PLACE THE MATNR)
SELECT * FROM MARA INTO TABLE ITMARA WHERE MATNR IN TB_MATNR.*
Edited by: Vijay Mekala on Feb 1, 2008 5:16 PM

Detail information showing up on multiple areas of a report

Post Author: Theresa Rose
CA Forum: Crystal Reports
I need detail information to show up on multiple areas of a report that I am working on.There are different areas on a form that I am working on that require multiple lines of detail information. I have tried using a subreport, but when it goes to a second page it doesn't show the correct detail information.

those are imessages, you guys must be using the same apple id for imessages.
go to settings>messages>send &recieve and check whether the same id is listed in the all the phones, if so change to a different id or remove it.

QUANTITY MULTIPLIES BY 9 ON REPORT

Similar Messages

Maybe you are looking for