Quantity of pages of a specific size in a Document?

Is there anyway to count the pages per their sizes? If my document has both A3 and A4 pages sizes, can I know how many of each there are in the document?

You could conceivably write a JavaScript program to do that by going page by page and querying as to the current page size and updating your own counters. There is no built-in facility for this.
- Dov

Similar Messages

Opening a web page with a specific size window

I have an interesting problem. I want to open a Safari window on my computer with a specific size and screen position. Is this possible to do? Maybe an HTML string? This would apply to a very specific web site.
If it matters, I am using a Sling Box to watch TV on my iMac. I want a "small-ish" window that opens on the lower right of the screen. What happens now is the the window usually opens in the same place as last time (the lower right) but not always. Sometimes I have to go hunting for it. And it's almost never the right size or aspect ratio which has to adjusted manually each time.
Another question: The new version of Safari insists on putting the web page name on the top of the window. Any way to turn this off?
Thanks in advance.
That's the little window in the lower right. See the page name?

"Many" financial institutions and banks use special web software that all versions of Safari are incompatible with. My bank is one of those. The downloading, installing, and use of "Firefox" for an alternate browser is what they recommend, instead of Safari.

Opening 'blank' page with a specific size???

hi all!!!!
i have some links on my page that open into a 'blank' page
(ontop of my main page)...... when they open they open to a large
size, with lots of space around the content....
is there an option in dreamweaver to set how big the new page
will open at???
thanks!!!!

Go here and get the "smart link" extension
http://japan-interface.co.uk/webdesign/tools/index.html
c t e wrote:
> hi all!!!!
>
> i have some links on my page that open into a 'blank'
page (ontop of my main
> page)...... when they open they open to a large size,
with lots of space
> around the content....
>
> is there an option in dreamweaver to set how big the new
page will open at???
>
> thanks!!!!
>
kim aka Prince of Copenhagen
http://mouseriders.dk

Jump menu creates blank page that is a specific size

I am attaching the code that worked for the jump menu to open
in another window but I cant figure out how to get the page to be a
specific size (w=600 h=650) and have no resizing or toolbars. Can
you suggest what is wrong or missing with the code?
<script type="text/javascript">

</script>
<form name="form" id="form">
<select name="portfolio" id="portfolio">
<option>Categories</option>
<option
value="advertising.html*_blank">Advertising</option>
<option value="corpid.html*_blank">Corporate
Identity</option>
<option
value="publishing.html*_blank">Publishing</option>
<option
value="websites.html*_blank">Websites</option>
<option
value="misc.html*_blank">Miscellaneous</option>
</select>
<input type="button" name="go_button" id= "go_button"
value="Go" onclick="MM_jumpMenuGo('portfolio','blank',0)" />
</form>

Hello,
Any help on this issue is highly appreciated.
Regards,
Anup N.

How do I print multiple items of a specific size on one sheet of A4 using photoshop elements 12?

HI
I have a small sublimation business whereby I print photo's onto small personalised gifts such as mugs, phone covers fridge magnets. I print out the images to fit the size of the gift i.e. a phone cover or mug the images are a specific size.
Often I want to print multiple items onto one page each with a customised size as the paper is expensive and I need to make the most of every sheet. I can't figure out how to do this in photoshop elements 12 can anyone help / advise?I am using windows XP
Thanks Lynsey

You have a much better chance to get a useful reply if you ask in the Photoshop Elements forum.

How to draw a specific size circle?

I have to make a 7cm diameter in a homework i'm doing in pages, but i can't find a way to make it in this specific size. Can someone tell me the way?
Thanks,
Mateo

As attached.
Perhaps it would be better to learn the ABC of Pages

Can you define a specific size of a Drawing Markup rectangle?

Hi all,
I am using Acrobat X and have been asked to find an answer to a 'problem' someone is having.
If you have a site plan of one's property and they submit it to me for comment (as a pdf file) can I draw a box to a specific size? Say I set the 'scale ratio' to what the drawing scale is, I go to 'comments' and from the 'Drawing Markups' pane I choose 'draw rectangle; square', I then draw a rectangle to represent a shed of a specific size. I can dimension how far the rectangle/shed is to be from the property lines and I can dimension the rectangle/shed but I have to play with stretching it to get it to my desired size based on the scale I set.
My question; is there anyway, when I am drawing the box, to either specify an x by y size or see the lenghts of their sides once I pick a corner and start to drag the box to the other corner?
If not, would there be a java script that could accomplish this task?
Any help would be appreciated.
Thanks in advance.
Paul

Thanks Sabian, I understand that Acrobat is not a vector drawing application and I have been using all those programs (illustrator, AutoCAD, CorelDRAW etc.) for the past 20+ years. It wouldn't seem too much to ask considering that I can set a scale to my page (in Acrobat) and I can get Acrobat to give me a dimension from point A to point B based on that said scale, so why couldn't I expect to put a rectangle markup based on that same scale?
As for the right tool? We are a municipality that is trying to make it easier for the public to submit applications online. Those submissions are in the format of a PDF because it is unrealistic to assume the everyone in the public has access to or can afford a program like AutoCAD or illustrator. Likewise it is too COSTLY to have everyone in the city have say 'AutoCAD' or even 'illustrator' to view the application documents to markup and send back.
I believe In 1991, Adobe Systems co-founder John Warnock outlined a system called "Camelot"[3] that evolved into PDF (from Wikipedia) and it was a way to have an independent viewing format regardless of what software application created it. I truly believe that Acrobat for what it's initial intent was that it should incorporate some of these features as it only makes sense in an evolutionary sense. Not to be a 'drawing package' but in it's markup/comments palette to expand on them.
So keep your comments to 'no at this time acrobat does not allow this type of functionality but who knows in the future' and don't treat me as though I don't know anything about anything. In my decades of using these applications I have seen them evolve to include more functions and do more then when the product was originally released.
I will now go on and recommend that they seriously look at Bluebeam Revu as it is not only cheaper but it has a ton more functionality specifically designed for the needs as listed above working with PDF's (and bitmap images to boot). I was just wanting to cover all bases and give all programs a fair look.
Thanks again for your intuitive insight.
Paul

LINK : open a PDF at a specific size (acrobat X)

Hi all,
I'm creating links between several PDF files.
For some links, I open the PDF a new window (with regular link options).
But, I need to open the pdf at a specific size, as a HTML/ javascript popup.
Is ther a way to achieve this?
Many thanks in advance .

Yes , the feature is available in Acrobat.Any section on a page can be defined as a named destination. The panel to do so is available through View->Navigation Panel->Destinations. Also there is a list of PDF open parameters which can be given in command line , one of them is nameddest. So if you select a section on the page and name it X, and give acrord32.exe /a nameddest=X filename.pdf, the focus would be on section X. These command line parameters are honored by both Acrobat and Reader but destinations can be viewed and added through Acrobat only. Needless to say, this would work even if the page number changes.
Regards
Sanika

Using a text link to open a new browser window to a specific size

i can figure out how to make a link open up a new window
(_parent, _top, etc.), but how do i make the window a specific
size?
thanks,

Hi joeq ,
We don't need to change the html page title. I tested the
same code ('undefned') in html/javascript, but not with flash.
Use the same script in html/javascript and test it.
If it works fine, then create a javascript function in your
parent html.
Then call the function from flash, it will be fine.
I tested the same code with IE, Netscape, Firefox(linux),
also mac-safari.
Regards,
Sankarapandian T.
[email protected]
Chennai, India.

Berkeley DB needs too many write locks on specific size of the records

Hi,
I put records to the Berkeley db row by row in single transaction. And i have discovered significant increase of write locks on some specific size of the data.
For example when i put 1000 records, where each record data size is around 3500 bytes, transaction uses 428 locks. On bigger or smaller data size transaction needs fewer locks.
I put statistic in the table:
Record size Lock number needed by transaction
~1400 169
~3500 428
~4300 6
I think it is somehow related to the page size(16384) or cache size (64Mb)
Could someone explain why transaction needs so many write locks with data size ~3500 and fewer locks with data size ~4300?
Is there any way to avoid that raise of lock number? If not, I need to measure maximum number of locks needed for successful end of transactions. Understanding of the source of that issue would help me to prepare data which require the biggest number of locks for putting it in the database in one transaction.
Thanks in advance.

Please delete this post and repost in the appropriate forum. Thank you.

Open a _blank window with a specific size

Hi !
I need to open a new _blank window with a specific size. I
don't know sh*t about javascript. Could somebody help me by showing
me a completed solution.
I searched for a "onLoad" solution to put in the html of the
targeted page but I didn't find anything. My link is from a flash
to a really basic html page.
Thx guys !

Fel_911 wrote:
> Hi !
> I need to open a new _blank window with a specific size.
I don't know sh*t
> about javascript. Could somebody help me by showing me a
completed solution.
Forum Archives:
http://groups.google.com/advanced_group_search?q=group:macromedia.flash.*&hl=en&lr=&ie=UTF -8
Search "pop up" or "popup"
Couple of hundreds of posts, with code samples.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

How do I insert multiple pages in a specific order?

I create reports in Word and convert them to Adobe before sending them out to customers. I often need to insert additional (Adobe) pages into the report before sending it out; sometimes I need to insert mulitple (20 or 30) pages. Does anyone know how I can insert these pages in a specific order? A few times in the past, Adobe gave me the option to select the order, but lately that option has not come up. HELP!

Hello Try67,
I go to Document>Insert Pages then select the files I need to insert. The order in which the pages are inserted is important because they are results of pressure tests (e.g. Sample 1 thru sample 10). I just ran a trial; I tried to select them from top to bottom and bottom to top and it did not seem to make a difference...they went into the document in reverse order. As I mentioned earlier I used to get a pop-up screen that would ask what order I wanted the inserted pages in...I don't get that pop-up anymore.

Is there a way to split a very large 1 page pdf into letter size multiple page pdf?

I often have very large single page pdfs that need to be printed onto letter size paper. Usually I don't have access to the printer where I'm working so I have to send the file to someone for printing.
I have AXI pro, they don't.
I want to make sure the job is printed as I specify and most of the users are using Reader. So I want to give the someone the pdf ready to print sized in legal. This requires manipulation of the pdf that I don't seem to be able to figure out how to do.
In older versions of Acrobat, I could print to a new pdf and designate the page size. Acrobat would create the multipage pdf. The newer versions don't allow this.
With OSX 10.8 & AXI you can't save, export, split a one page (68" x 16") document into multiple page letter size (16 pages) pdf.
Perhaps this can be done by printing to eps and running through distiller again or something else, but I'm stumped at the moment.
Any suggestions of how to attach this would be appreciated.
Thanks.

That's a tough one. Acrobat is not designed for tiling PDF files to create another PDF. That's really what you're asking. There is the option to PRINT to a PDF, and turn on the Poster feature. If were in Windows where there is a real Adobe PDF printer driver, you could probably use that feature. But for various reasons (too complicated to describe here), that was withdrawn on the Macintosh.
If you have a copy of Adobe InDesign, and if you installed an Adobe PDF 9 PPD file (see description below), it could be done in a somewhat awkward way. InDesign allows you to place PDF files so you would need to make a page of the proper size and place your large PDF:
Then after installing the Adobe PDF 9 PPD file, you could choose File > Print. Then choose to print a PostScript file to the Adobe PDF 9.0 PPD file. In the Setup panel, you'd choose a Letter size page. Then you'd choose the Tile option at the bottom and set the Overlap amount:
Then you'd save the PostScript file and process through Distiller.
My blog post below describes how to find and install the Adobe PDF 9.0 PPD file:
http://indesignsecrets.com/creating-postscript-files-in-snow-leopard-for-older-print-workf lows.php

Changing the size of a document in Pages?

How can you change the size of a document in pages? I need to change a poster size document to 8.5 x 11?

Nevermind. Found it! Sorry, new to Mac

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

Quantity of pages of a specific size in a Document?

Similar Messages

Maybe you are looking for