Quantization. I am at a loss to understand it

I know it snaps the timing to the nearest beat but I havent really moved on from there. I beleive its a fundamental of any DAW user to grasp. I subscribe to many video tutorials including MacProVideo, Groove3, MacforMusicians and AskAudio. I learn "by doing" so can anyone suggest a good video (with audio) or an experimental project in Logic Pro 9 or Garageband11 to help me?

.youtube.com/watch?v=RDF6XiDcgpg
A decent job explaining it for LP8 and it shouldn't be to difficult to distill a general "quantization" understanding from it IMO.
Have a nice day!

Similar Messages

RAID3 Storage Capacity Loss

The installation of RAID3 on my workstation has just been completed but I am at a loss to understand why I lost so much storage capacity.
A seven disk (each a 1TB Samsung Spinpoint F3) RAID3 array with an Areca arc-1880ix-16 controller with a 1TB Samsung F3 Hot Swap by a "professional" from a local computer shop. Upon completion, the 7 TB array yields a total capacity of only 4.54TB.
I expected to lose some capacity but a 35% loss seems out of line.
What capacity loss can normally be expected with a RAID 3 array?
If my 35% loss is out of line, what steps, other than finding a better "professional", might be considered to rectify the situation?

Finally, I have my problem solved thanks to Eric at ADK.
My 8 1TB disk RAID3 array with a hot swap spare now yeilds a total capacity of 5.45TB as Harm indicated it should.
The person who installed my controller and set up my RAID3 system made a number of errors and omissions in the process. After much consternation, I called Eric at ADK and hired him to assist me by remote hook up. Which he did brilliantly.
Along the way, we discovered that the Areca controller utility utilizes a Java version which is not compatible with Windows 7, or at least as it is installed on my system. Neither the Areca download or their CD could be used to install the utility. Eric found a workaround and got it installed properly.
Eric then went about updating a number of drivers on the workstation as well as adding a few which he thought appropriate to my needs. Then he set about making a number of adjustments to the set ups for the programs in my Adobe CS5 Creative Suite Master Collection. Along the way this technical boob had the opportunity to ask a number of questions and get real clarity on gaining optimum performance from my workstation.
Finally, Eric ran the PPBM5 benchmark test again. I was, frankly surpised that there was no appreciable increase in the speed of my workstation in dealing with the tasks which are part of that test. That, frankly, was of little importance to me as my primary goal to the security of my files.
I simply cannot say enough about Eric and how pleased I am to have him as a resource to turn to when the need arises. He was gracious and patient with me and tenaciously resolved to find the workaround as well as take the additional steps needed to get my system working properly.

Timed loop and CPU usage

Platform is WIN_XP Pro and machine is a P4 at 2.5Ghz with 512 Mb ram.
LV7.1 + PCI 6229
I am using 50ms Timed loop for running a state machine inside it
and also a whole lot of other things like reading / writing
DAQMx functions; file I/O functions and such. As the
project involves a main and sub-panlel set up local variables
could not be elimnated fully and there should be something like 150 of
them. But not all are accessed always - maybe about 15 of them at any
given time depending on the SM staus.
Problem :
Once started the "Finished late" indication is off and
the actual timing alternates between 49 to 52 ms. The CPU
usage is around 25%.
But as time goes by, the system gets unstable : After 15 minutes
or so, the Finished Late indication is always ON and the CPU usage is
gradually tending towards or exceeds 100%.
Obviously the machine control timing now gets affected and things slow
down badly. Closing the application ands restarting repeats the above
cycle.
I am at a loss to understand what is happening ? WIll
breaking down the single Timed Loop to multiple ones help ? WIll
that be an efficient way of parallel threading ?
I can post the code but its quite large and will do it as a last resort.
thanks
Raghunathan
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

Hello,
It sounds like an interesting problem. It would be worth some experimentation to figure out what's going wrong - attempting to decouple major "pieces" of the code would be helpful. For example, you could try breaking your code into multiple loops if that makes sense in your architecture, but perhaps you could even eliminate all but one of the loops to begin with, and see if you can correlate the problem to the code in just one of your loops.
Another concern is that you mention using many local variables. Variable read operations cause new buffer allocations, so if you're passing arrays around that way, you could be hitting a problem of forcing your machine to perform many allocations and deallocations of memory. As arrays grow, this can be a bigger and bigger problem. You can use other techniques for passing data around your block diagram, such as dataflow if possible (just simple wires), or queues where dataflow can't dicatate program flow completely.
Hopefully looking into your code with the above considerations will lead you in the right direction. In your case, removing code so that you can identify which elements are causing the problem should help significantly.
Best Regards,
JLS
Best,
JLS
Sixclear

Problem with move of iTunes music to external hard drive

My hard drive was getting full and I bought a new external drive and moved iTunes to it carefully following directions on ilounge and Apple support.
1. I first hit consolidate library and only moved the iTunes music file (as per the iLounge directions), then went to Preferences and changed the location of the music file to the external drive.
2. Itunes did not find the paths on the external drive.
3. I then tried to follow the Apple directions and here is when this went wrong. By hitting create new folder and consolidate music again, the whole music folder copied again to the eHD resulting in 10k duplicates.
4. However, this time the songs all worked, so now I had a duplicate problem. By checking these discussions I found an easy way to get rid of the duplicates by sorting by Date (meaning move date- the second time I copied the music file the move dates in all the songs was yesterday, and this was the link where all the songs worked.
5. I thought all was well after checking the music played and even testing remote on my phone, turning off the computer, restarting and confirming iTunes launched fine. Instead of following excellent advice many of you have posted on waiting a few days to check everything works before deleting the old music folder, as my internal HD was completely full I deleted it opening up 100GB of space.
6. Of course, I did not check everything- my playlists were all gone. The iTunes Library files are now both on the EHD and on the iHD but I cannot recreate the playlists. I suspect the playlists were all linked to the original music files copied the first time with the broken paths.
7. At this point is there any advice to recovering the playlists- I have them on an ipod and iphone. Worst case I will need to manually the Playlists.
8. Learning from my mistakes, NEVER, delete the original music folder till you are sure everythng works and even then wait a few days so you will have an opportunity to properly check everything.
9. Finally, I am at a loss to understand why the iLounge instructions did not work for me- only copying the music files to the eHD, leaving the Library files on the iHD, and changing Preferences to the new music file location.
thanks

kneedragger101 wrote:
Note this is an iTunes Library that was on a PC
you might want to read these articles: one and two.
why not move your media files using _*Home Sharing*_ ?

Export and deemed exp

I have joind a project in the middle and I am at complete loss to understand the export and deemed export scenario. I have gone through the help files but I am still not clear as to when i should include duties in the sales order and where i should not...........how to get the duties directly in the exc invoice .............. which registerss should i look in to for updation and how is rg23a ,c and pla relevant in this case.
plss assist in clearing out these things .i am sure a lot of fellow consultants could benefit from a detailed description for the same.
Regards
MAddy
Edited by: Maddy on Jun 12, 2008 11:07 AM
Edited by: Maddy on Jun 12, 2008 11:20 AM

Hi
Meddy,
Both are having the same excise duty effect. In both cases the duty will be not paid to excise authorities and both will be shown on invoice undeer forgone head. In both invoices you have to show all the duties which are applicable as tariff head. For gorgone duty case u have to prepare ARE1/ ARE3.
In case of export, material will be despatch to outside Inida ( foreign customer ) and in case of deemed export u can sell the good wihtin the india aginst CT2 and CT3.
So in both the cases u need not to debit any of yr RG23C,A or PLA this will come in picture only when u sold duty paid goods to any customers.
Hope this will help you.
Thx.

How do we get collection images to appear (provider hosting)?

Despite forcing a refresh and waiting several days, we are still not seeing the collection images show up in iTunes U using a feed from our in-development RSS feed service which is slated to replace our in-service machine in the next few weeks. One of the new features is the inclusion of channel/collection images in the RSS feed so this is an item of considerable concern for us.
The currently deployed system sent the same image for all channels/collections, a stock institutional logo. That got really monotonous very quickly. The new system enables the channel owner to upload a 300x300 image for each channel. So we have a set of two case studies to compare.
Currently deployed system
Feed: http://podcasting.usg.edu/4dcgi/podcasting/gcsu/channels21674/19013.xml
Appearance in iTunes U:
The relevant XML:
<channel>
     <itunes:image href="http://podcasting.usg.edu/stats/GCSU/logos/gcsu.jpg"></itunes:image>
Aside from the monotony of the same image for every channel/collection, this works as intended.
About-to-be-deployed system
Feed: http://denver.gcsu.edu/4dcgi/podcasting/gcsu/channels21674/19013.xml
Appearance in iTunes U:
The relevant XML:
<channel>
     <itunes:image href="http://denver.gcsu.edu/podcastdata/GCSU/Channel_19013/19013.png"></itunes:image>
Since you can paste the address of this image into a web browser and see it just fine, I’m at a loss to understand why iTunes U is unable to do so in this case (the in-development server) when it succeeds in the case of the currently deployed server. The structure of the RSS is exactly the same.
Now that both channels are published, a further mystery is pictured below. The “old” or currently deployed server displays the image in the RSS feed but the “new” server is displaying a podcast icon! Where did that come from? It certainly doesn’t look anything like the image we specified in the RSS feed for that channel.
From “What’s New” See All:
A possible clue:
Further on in the RSS for the new server, we attempt to provide an image for each of the episodes/items as follows:
<channel>
          <item>
     <itunes:image href="http://denver.gcsu.edu/podcastdata/GCSU/Channel_19013/podcast_6626/6626.png"></itunes:image>
Since iTunes U doesn't (yet) support uploaded images for episodes/items, I wondered if this might be the culprit. OTOH, unrecognized tags should be ignored.

It would help if you'd given some idea of what you've done so far, so that people don't waste time going through the things you've already done.
For example, you don't say whether or not you've connected the XServe RAID to a host system via the fiber channel cables. That's the first thing.
Have you yet configured the XServe RAID (using RAID Admin) with the array settings you want (e.g. RAID 5, RAID 1, one slice, 5 slices, etc., etc., etc.).
Out of the box, the XServe RAID will be configured for one RAID 5 array per side, so you might be OK there, but you might not.
Then does Disk Utility show the arrays at all?
If not, does System Profiler show the arrays connected?
If they are connected Disk Utility would usually show them, which might indicate the fiber channel cables are not connected.
If Disk Utility does show them, you might need to initialize the arrays. Once they're initialized they should appear on the desktop.

Can 2 Macs on different DSL providers share files?

How can I connect to my Mother's computer across town on a different DSL provider and backup her Hard Drive to my external drive and do maintenance?
Thanks in advance.
I've tried through ftp server but got an error message.

Thank you for the links. The tunnel sounds a bit out of my experience and I have played with Chicken of the VNC but it didn't work out so well.
The big question is even if I could network to her computer it would probably take for ever to back up her whole hard drive to my computer, no?
My attempts at file sharing over the internet as shown in "The Missing Manual" and also trying to make her computer an ftp site where I type in her address all failed an I am at a loss to understand why. Besides checking the preferences for File Sharing and FTP Access where there other settings I missed? FTP wouldn't allow me access after typing in her Computer's name and password. I then tried her Hard Drive's name - still no access.
Is my only option to use VNC to control her Mac to launch a B/U program like Retrospect to Back up to her External Hard Drive?
Thanks.

How do i set up a template for a double sided 3 hole binder book?

I am trying to set up a template for a directory using double-sided pages in a loose leaf binder. How do I set up the margins, etc. for both sides of the page accounting for the holes to be punched. I'm at a loss in understanding how this is to be done and then printed so the pages come out in proper order. Can anyone help?

Inspector > Document > Document Pages > check Facing Pages > Inside: 20mm or .75"
What do you mean by proper order? If you mean printed back to back, you can print all the odd pages first then feed them back into your printer flipped and print all the even pages.
To get them to print and come out in the right order you may have to print the evens first and perhaps printed in reverse order, experiment for your printer and take notes.
Peter

Why are subscribed calendars so hard to deal with???

I use-
iCal on my imac.
calendar app on my iphone
MobileMe Calendar (beta).
I don't have any complicated google calendar subscriptions, or Exchange calendars or anything like that.
I have 2 simple iCal calendars that I subscribe to.
And for some reason that has to be a big production??
In iCal they work fine.
In Mobile me they just don't work at all- the beta doesn't support subscribed calendars yet. fine.
And on my iPhone, they're a mess.
They appear in the calendar list (albeit with the wrong colors, and I can't edit the colors)
but the actual events on the calendar don't show up in my calendar.
Then the birthday calendar- what the heck is going on with that?
Again, works fine in ical.
Even works in mobileme.
But on my phone its listed twice, and I have to turn one off?
I don't understand why it can't be consistent... why is this so complicated???
I just want the calendar on my phone to match the calendar on my desktop.
Same colors, and with the events actually showing up and syncing. I don't care if I can't edit the subscribed calendar, I just want to be able to SEE it.
Message was edited by: Alexroet

Sorry, but your post is to me contradictory. First you say you want to remove movies, then you say you want to add them. Then you complain that you have to convert movies before you add them to iTunes. So I'm at a loss to understand what it is you are really trying to accomplish. Please post back and explain clearly what it is you are trying to do and where you are running into difficulty.. Leave out the invective and it will be easier for us to understand.
As to iTunes being "fussy", the formats iTunes and the iPad can support are pretty clearly stated in Apple's information. No application, on any platform, supports all content formats, so if you want to use a format iTunes doesn't support, then of course you have to use some other software to convert it first. That's just simple logic.
Regards.

Remote Desktop Connection stopped working

I made a change to my Verizon TV and Internet package, downgrading from Ultimate HD to Extreme HD and from 35/35 to 25/25. This morning, when I ran a speed test it showed the new speed. I went out for a few hours, and when I returned, my internet connection was not working at all.
I called Verizon's support number and, after talking to two different people, one who wanted to swap out my router, and one who wanted to send a tech to check out my ONT, they finally figured out the problem was with their configuration, not any of the hardware in my house, and got me running again at the correct speed.
During the trouble shooting process, they had me do multiple soft and hard reboots of my router, they remotely rebooted it, and had me push the recessed reset button once, restoring it to factory defaults. This led to problems with my wireless devices, so I loaded a configuration file to the router that I had thankfully saved some time prior to this problem, and everything seemed to be working properly.
Then, I tried to open a remote desktop connection from one of my machines to another one, both on my internal home network, a connection that had worked flawlessly up until now, and it would not work. Moreover, trying to ping the "remote" machine from the one trying to initiate the connection gets no reply, but pings are replied to in the other direction. And, both machines can see and access each other's shared folders and files, and both can see each other in the network map in the networking and sharing control panel app.
I never made any configuration changes to either machine during the trouble shooting process, but to be sure, I used system restore on both machines and took them back to restore points made yesterday, when everything was working.
I am at a loss to understand what has gone wrong, and would appreciate any constructive and helpful suggestions as to how to remedy this situation.
ps
I am running two different web servers on the target machine, and am running stunnel on it to provide secure nntp connections to a news client that doesn't have that capability built in, and none of these servers are available from other machines. Nothing seems to be getting through to the target pc except windows network sharing!

dslr595148 wrote:
#1 In the router go to Advanced -> Universal Plug and Play OR to Advacned -> UPnP (what ever exist in your router).
#2 If you do not have at least two special computers that support Universal Plug and Play (UPnP) where you can not define the ports that they use, turn off UPnP.
A perfect example. At least two game consoles. Any two (Two Xboxes, two Playstations, One Xbox and one Playstation).
#3 If you have at least two special computers that support UPnP where you can not define the ports that they use....
Do you only use one at time or are there times when at least two are on?
#4 In the router go to Advanced -> IP Address Distribution Or to Advanced -> Private LAN
#5 What is the Starting and Ending IP Address, that is listed in there?
We have two Xboxes and a Logitech Revue. I have Windows Media Sharing enabled on three computers, and am also running a beta of Logitech Media Server on one. It is possible that there are times when two or more streaming clients are in operation, but that is a very rare occasion. Two of the computers, the ones I mention in my original post, are on almost continuously.
In Advanced -> Universal Plug and Play, both Allow Other Network Users to Control Wireless Broadband Router's Network Features and Enable Automatic Cleanup of Old Unused UPnP Services are checked, and WAN Connection Publication: is set to Publish Only the Main WAN Connection.
In Advanced -> IP Address Distribution, under Dynamic IP Range it says192.168.1.2 - 192.168.1.254. However, in Advanced -> IP Address Distribution -> Connection List I have set all the lease types to Static, because I was having problems using the Verizon web page to access my set top boxes, particularly the MRDVR. The Static IP addresses for the computers, game consoles, Bluray player etc. are in the range 192.168.1.2 - 192.168.1.12, and the set top boxes are at 192.168.1.100 & 192.168.1.101.
One thing I did not mention in my original post is that I have two unmanaged gigabit ethernet switches in my home network. There are two computers, the ones I mention in my original post, and the Logitech Revue plugged into one switch. That switch plugs into another switch which also has one pc, an Xbox, and a Bluray player plugged into it, and that switch then plugs into one of the ports on my Verizon supplied Actiontec MI424-WR Rev C, firmware version 4.0.16.1.56.0.10.14.4. All of the other ethernet ports on the router are unused. In addition, we have a laptop, a notebook, another Xbox, and a Wii that connect through the Actiontec's wireless.
I don't know if media streaming is still working and I don't really care if it is because we use it so seldomly. It never worked consistently or to our satisfaction. When we want to watch or listen to media from one computer on another, we copy it over the network from shared folders. We have a Homegroup, to which all of the computers belong. If we want to watch or listen to media on one of the game consoles, we copy it to a flash drive. The Bluray player is only connected to the network for firmware updates and for discs with network enabled content.
This same setup was operating before the problem developed, and I can't figure out what has changed to create the problem. The router configuration file that I am using is from June of 2011, and I'm pretty sure that everything was working fine then, and don't recall making any changes to the router's configuration since then.

Sync on two different computers - long overdue...and itunes needs improvement

Complaint #1)
I cannot understand why apple at this point STILL will not allow the same ipad/ipod to sync with two computers. I have a pc at work, a mac at home - why am i unable to sync with the apps in both places? It is 2012, and the copyright argument just does not fly, especially if i authorize both machines which apple seems to allow one apple ID to authorize up to 5 machines.
But what is the point of authorizing a computer if you cannot sync to it? I realize this is a help forum and not a place for rants, but am at a loss to understand why apple is clinging to this awkward and very annoying/frustrating setup.
Complaint #2)
About itunes itself, this serves as the main gateway for all music/apps/movies/books. etc., and BADLY needs an upgrade in aesthetics as well as function.
Since it is now the primary conduit for all apps and other items, why is it even called "itunes"? But more to the point, it is an awkward and difficult app to use, and it is surprising that it even comes from apple.
Mind you, I've been using apple computers since the IIe, so i go back a ways with the company, but itunes is a train wreck IMHO, and a better platform with far more flexible features and improved functionality is long overdue.
You have a world-class tablet in the ipad 3, why did they not introduce a conduit platform on which to move/transfer documents/files etc that is equally superb?

Regarding #1, see this post.
tt2

Error Message When Installing eLearning Suite on New PC

Hi. I have been using the eLearning Suite 2 since its launch last year. I recently treated myself to a new PC (64 bit, Windows 7) and have downloaded the software again from the Adobe site so that I could reinstall it.
The download (via the Akami download) seems to go fine until I try to extract the files. I then get the following error message: A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder.
The priviledges are all fine, as I have installed a lot of software into exactly the same folder already. And there's about 600GB of space left on the drive. I also also came across the files that I used before to install the suite on my old PC, and got exactly the same message.
Am at a loss to understand what is wrong. Any ideas?

It turns out that the problem was I downloaded the files via Google Chrome. I tried both the Akaimi and the alternate files, and neither worked.
When I downloaded the alternate files via Firefox, they worked first time. No further tinkering required.
Thank you for your help, Mylenium. Have a lovely weekend.

Package has multiple "SMS Distribution Manager" entries on DP it is not published to.

I have an issue with packages seeming to deploy to DPs they are not being published to.
We have an aging SCCM 2007 system, which is currently being wound down, so we can migrate to Config Manager 2012.
The 2007 system currently has 3 servers acting as DPs - one for general software distribution (DP1), one for OSD deployments (DP2) and one for Patch Deployment (DP3).
DP settings for each package are configured so that general software packages are only published to DP1, all packages related to OSD are only published to DP2, and all Software Updates packages are only published to DP3.
For historical reasons, DP1 is also a secondary site server, however, this now manages site boundaries for the full estate, prior to migration to SCCM 2012
I have just returned from a very pleasant annual leave to find that DP1 is flooded with site status messages for the SMS_DISTRIBUTION_MANAGER component; these are repetitions of the same three messages:
"SMS Distribution Manager is beginning to process package ..."
"SMS Distribution Manager is starting to distribute package ..."
"SMS Distribution Manager successfully processed package ..."
The package in question is an OS Image, which is only published to DP2. I am at a loss to understand why it is continually trying to publish to DP1 (over 33,000 entries for this component as I write this)
Note that these messages are "information" level messages, not errors, but are causing the Site Status for DP1 to continually "red flag"
Are there any logs etc I can check on this server to debug and diagnose why this rogue package is trying to process itself on this server? And any steps I can take to kill this?
Thanks
Stan

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

I want to set up my Airport Express Base Station again but do not remember how. Please walk me thru it.

I am trying to hook my Airport Express Base Station up to be a router again and have forgotten how to do this. Before I had it hooked through the modeum and would like to have it that way again but for some reason the process has completely left my memory. I know it has something to do with the little icon on the top of the computer but not what it has to do with it. Because it is not hooked up I am unable to get my printer to work unless I connect to another wireless that I have but do not want to use all of the time since I have to pay for it and do not have many GB. I am also paying for another that I want to use all of the time (unless necessary to use the other) so It only cost me when I am away from home. Please walk me through the process of hooking the Apple router back up.

All apple routers are setup via Airport Utility.. there is no icon for it in the top menu area.. I think you are confusing the airport network setup (ie the internal wireless card in the Mac) with the airport express setup.. Apple insist on calling everything the same name which makes it more confusing.
Open the airport utility which you find under applications/utilties.
Router setting will depend on what version of the utility you are using.
In version 5 it is under Internet tab and in v6 utility under network. You need to set it to DHCP + NAT.
Download and read the manual for setting up the express if you have forgotten the details.. manuals are always good.. all the manuals are listed at the head of the section. But you are in Time Capsule instead of extreme/express specific area.
https://discussions.apple.com/community/wireless/airport
Manuals link http://support.apple.com/manuals/%23airport
If you want the express as router the modem should be bridged or it should be a pure modem for it to work without Double NAT issues. There is nothing wrong with bridging the Express.. that is not the same as using it in wireless bridge modes.. that is router bridge.
What modem do you have?
I am at a loss to understand the rest.. why the printer is not part of your own network.. and how setting up the airport this way is important. You need to give us specific details if you need more help.
How exactly is the airport setup now?
How do you connect to the modem?
How is the printer connected? What kind of printer?

Self-assigned ip address -- can't connect to Airport

I have a 2006 MacBook Pro which recently started exhibiting the exact same behaviour as reported by another poster in 2011:
For some reason the computer has started self-asigning its IP address and Network Preferences says that, because of the self-assigned IP, i cannot connect to the network.
I have two other Macs connecting to the same Air Port with no issues and I've tried to duplicate those settings on the MacBook Pro but still get the "self-assigned ip" message
Tried re-setting SMC and PRAM, no change.
The only change to my wireless setup was the change from a Verizon-owned modem to an owned Motorola unit (but the MacBook Pro connected successfully, many times, after the change).
I didn't knowingly change anything on the MacBook Pro -- from one day to the next it just stopped connecting.
I'm really at a loss to understand what's going on and, of course, not happy that the MacBook Pro can't connect to my network anymore! Help!

The wifi icon shows no connection with the network -- the "!" mark.
However the computer sees the network, i.e. when I search in Network Preferences the network is listed.
So: 1) the computer sees the network but 2) will not connect to the network. The reason given for refusal to connect is "self-assigned IP address".
Not to be repetitive but two other Mac laptops are connected to the same network and working perfectly. The network preferences, as shown in the "advanced" section, are the same for all machines, i.e. DHCP is selected and IPv6 is Automatic.

Quantization. I am at a loss to understand it

Similar Messages

Maybe you are looking for