Queries on NWDI and ADS

Dears
I have a separate box for NWDI installation.. with 16GB Ram and 4 processors.
I wanted to confirm if the SID of NWDI should be different as compared to my portal Dev/Qas/Prd ? and if any directory should be shared across them ?
ADS: Do we need to install ADS on AS Java based portal or it can be installed on AS Java based NWDI system described above.
Thanks,

Hi,
Yes, you have to use different SID compared to portal Dev, QA and Prod.
ADS: Do we need to install ADS on AS Java based portal or it can be installed on AS Java based NWDI system described above.
It can be installed on either of the server for ABAP systems to use ADS
Regards,
arjun

Similar Messages

How to find the list of all queries on each and every cube in the system???

Hi All,
I need some method to get all the reports(queries)(technical name and description),run on all the infocubes in the system. The number is very huge...roughly...on each cube there are near about 40-50 reports and the number of cubes is also too high.
Is there any table or function moudle which can make this job easy and less time consuming.
Freinds I need this solution urgetly. Please rush back...
regards,
minal

Hi Minal,
RSZCOMPIC table lists queries built on the cubes.
COMPUID is an ID of the query.
RSZELTDIR table contains description of the reporting elements. DEFTP field equals REP designates queries.
Search for RSZELTDIR-ELTUID = RSZCOMPIC- COMPUID. Field MAPNAME will contain a tech name of the query and TXTLG field its description.
Best regards,
Eugene

Why arent any videos working on my firefox browser? Youtube has an error message, and all other videos and ads come up with a blank white screen

It's one of those problems where it works like one minute, and then suddenly stops working the next. I know for a fact it has to do with the flash player in some way. I've had this problem before and found the solution, but for some reason i cant find it again, and forgot how i solved it. I've tried to redownload both adobe flash player and firefox but it didnt solve anything, disabling adblock doesnt help, disabling the hardware acceleration a little but useless difference, i have tried to disable the flash player add-ons and enabled them, both dont work, i only have 1 version of flashplayer( the most recent), and I am too frustrated to keep searching for an answer that is correct, when all i can find are the wrong ones over and over again . If anyone knows how to solve the problem where the FIREFOX(only) browser shows youtube as having the error " an error has occurred. Please try again later. " and all other videos and ads have a white blank screen, PLEASE help
also, everything works on google chrome and IE

also, the last solution i had didnt require me to install an earlier version of flashplayer or firefox, and it was the same problem

Links in email aren't working and ads aren't displaying in email either

Links in email aren't working and ads aren't displaying in email either. What settings should be changed to correct this.?

Go to settings>general> restrictions and see if anything has been turned on.

How do I get rid of spam pop ups and ads?

how do I get rid of spam pop ups and ads?

It's malware.
Help here ..
The Safe Mac » Adware Removal Guide
The Safe Mac » Genieo
The Safe Mac » Mac Malware Guide

3 queries 3 tables and in a NON-relational DBMS

3 queries 3 tables and in a NON-relational DBMS
i got this msg box error:
Error prop_id is a invalid identifier.
basically i have querying form a non rel_dbms.
with this statement
select a.case_nbr, a.Aplc_id
from Tcase a
, tloc b
, tla_prop c
where c.plan_area_nbr = '1'
and b.loc_id = a.Prop_id
and a.Aplc_id = b.aplc_id
thanks for responding
here is the first
query.
select prop_id, plan_area_nbr
from tla_prop
where plan_area_nbr = '1'
then i got a bunch of prop_id's from tla_prop that has plan_area_nbr of 1
the second query will have
select aplc_id, loc_id
from tloc
where loc_id is equal/the same prop_id from the table tla_prop
the third selection
will contain aplc_id from table tcase = aplc_is from the table tloc
select case_nbr, Aplc_id
from Tcase
where Aplc_id = Secondselection.prop_id
the goal is really to get the case_nbr with all criterias from query1,2,3 and table 1,2,3.
any ideas?
hmm, thanks in advance

Hi
Try this:
select a.case_nbr, a.Aplc_id
from Tcase a , tloc b , tla_prop c
where c.plan_area_nbr = '1'
and b.loc_id = c.Prop_id
and a.Aplc_id = b.aplc_id
Ott Karesz
http://www.trendo-kft.hu

Question on NWDI and DC for web dynpro for ESS components

Hi
I am working on installing NWDI and mostly we will be working with ESS & MSS webdynpro customization for NW2004s.
I have a doubt, now for customizing the web dynpro components of ESS is it just enough to create the SC and track and once doing this will the developers get to the DC's of ESS?
Or initially do I have to download the editable part of the web dynpro components and deploy it in the server?
I am not sure how the web dynpro components are made available for the developers. Please help me understand.
Thanks in advance
regards
-sm

Hi
Hope this link might help:
https://websmp206.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=872892
But please specify the EP version .
Thanks & regards
Arun Singh

Having trouble with pop-up windows and ads for MacKeeper

I've been having trouble with pop-up windows and ads for MacKeeper and similar "services." Tried to download "MPlayerX" a week ago and it all started then. I thought I deleted the file but I'm still having trouble. I've been digging for solutions on here, but nothing I've found on here has worked yet--the VSearch stuff (I think) isn't on my hard drive. Any advice?

You installed a variant of the "VSearch" trojan. Remove it as follows.
This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.venus.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.venus.daemon.plist
/Library/LaunchDaemons/com.venus.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/venus
/System/Library/Frameworks/v.framework
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

CProjects 5.0 and ADS - Netweaver 702 how to install?

Hello,
We have to install cProjects and ADS in the same machine. After reading the master guide, I think I need to install a Netweaver 7 EHP2 Abap+Java.
I have downloaded the DVD 51040135_13, but sapinst doesn't have an option to install a dual ABAP+JAVA, only abap and only java.
However, the installation guide ppage has installation guides for abap, for Java and for abapjava, so I don't understand. Besides note number 1387319, says that it is possible AS ABAP, AS Java and AS (ABAPJava)
Do you have any idea? I need the cProjects and ADS in the same server.
Thanks and best regards,
Ana.

Hi,
Whether it is duel or independent, ADS is installed in the java stack. Check the link below.
[cProjects Phase Approval : Approval Document does not exist;
Thanks & Regards,
Sanoosh

Creating Queries from Cubes and ODS

Dear Gurus:
I'd like to learn how to make queries from ODS and CUBES. can any Guru out there prescribe a particular infocube / ods project for me to make report on in both 3.5 and BI 7? I can send daily reports on my progress. I think this is the only way I will learn.. I may even have to seek help to create a simple architecture from Source DataSourc to Target Data Source to transfer Rules to InforSource to ODS to Cube and then fuill it with practice data just so that I can design a query / queries... Can any kind BW Guru offer me his/her assistance please... I may run out of a job if I dont learn soon...
<b>By the way... I would like to make it known that I am starting out totally from scratch.... As in ZERO BW 3.5 and/or BI 7.0 experience nor application background in either. Hence the why I seek expert advice.Your kind support, understanding and advice will be greatly appreciated to no end!</b>

The best way to start off is by reading the material on BW. The link below will give all the materials.
http://www.mysapbi.blogspot.com/
The to get hands on experience follow the scenarios in the best practices the link is below.
http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm
And to get a tutor the best way I know is search for an institute in the following link
www.sulekha.com
Hope this helps.
Bhargava

Since from three days my ff browser become very slow .many ppoups r coming and ads r loading on firefox . i want my firefox back to normal condition .

i always use firefox browser and recently i got a sirious broblem in ff. i am getting too many popups and ads in ff . i try to remove them but i cant succed . i dont know how to solve this . i have check control pannel also for to check there are any unwanted softwares .there are all good softwares there . i am getting too much anger due to these ads . when ever i open anything i am getting ads . i have seen that the adds are coming in chrome also . i want u to suggest good tip . i am not able to browse internet properly due to these ads . please help me .

hello, you probably have malicious software present on your system. please perform all these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

Inappropriate websites and now my computer has all these pop ups and ads.

Younger cousin was on "xxx" websites and I need help stopping pop ups and ads from computer. Any solutions?
It is on google chrome and my safari. Please help me figure out how to get this off my MacBook Air
<Edited by Host>

You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I have adblock but still get pop ups and ads

I get pop ups and ads on both safari and google chrome and have an adblocker on both. These pop ups are ads in many different ways most common is a new tab opening usually that stupid mac keeper website.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Difference between NWDI and JDI

Hi to all,
Is there any one who can give me answer on next question.
1. What is difference between NWDI and JDI? I have got confused because I red tutorials how to configure NWDI and there are two roles that use the same UME Actions. JDI.Administrator and NWDI.Administrator that uses CBS.Administrator and CMS.Administrate actions. Is it the same? Is NWDI is the same as JDI but for NW2004s (NW7.00)?
Best Regards,
Aleksandar

Hi Aleksandar
NWDI is same as JDI but the version difference. If you just use NWDI.Administrator it should work fine.
Regards
Praveen

Stop popups and ads on safari

I downloaded something not right. Ever since I have my internet exploring such as safari and firefox are constantly having pop ups and ads. I have done everything from blocking pop ups, checking the extension. Is there something I have downloaded that now is making this happen? How do I stop it??
Thank you!

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Queries on NWDI and ADS

Similar Messages

Maybe you are looking for