Queries regarding management console
Dear friends,
I am having a queries.. If i am having a ABAP+JAVA dual stack system, can i use JAVA MC to stop my ABAP system as well ..
so which one is true ?
- Both Java and ABAP can be shut down using java based MC
- Only Java can be shut down as this is Java Based etc..
thanks
ashish
Just try to call your so called Java MC... via
http://<hostname>:5NR13
NR= Instance number of your Java system. Once its open your can see yourself...
Read more about the same .. @ https://cw.sdn.sap.com/cw/docs/DOC-103607
Similar Messages
-
After moving database, error on startup operations manager console
Hello,
may be someone can help me or give me a hint. I have moved the operational databas of SCOM 2012 to an other MSSQL-Server; from a SQL2008 Server to a SQL2012 Server.
I used this document:
http://technet.microsoft.com/en-us/library/hh278848.aspx
After restarting the services i open the operations manager console, but it fails:
Date: 28.08.2014 15:42:03
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message: Failed to connect to server 'name.foo.fodomain.de'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://name.foo.fodomain.de:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0060373. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.177.9:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.177.9:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://name.foo.fodomain.de:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0060373. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.177.9:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.177.9:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.177.9:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
My databaseadmin told me, that all is ok, the operations management server queries the new sql server, then close the connection. So we started again the old database server, there are still queries to this server.
What i've done:
- Changing the database servers name in the registry, Microsoft Operations Manager, 3.0, Setup, DatabaseServerName
- changing the database entry at the file ConfigService.confg
After my databaseadmin told me, that there are queries at the old database server, i searched in the registry and found two entries:
- System Center
Common
Database
DatabaseServerName
- System Center Ooperations Manager
12
Reporting
DWDBInstance
.. i have still this error, no connection possible.
What testing i can do?
Kind regards
WolfgangYou have to update the DB server names in the databases as well. Here are the instructions for SCOM07, I suspect it's similar in SCOM12
Update the OperationsManager database with the New Database Server Name, and ensure that the account that you are logged on with has sufficient privileges on the SQL Server instance.
Open SQL Server Management Studio.
Expand
Databases, OperationsManager, and Tables.
Right-click
dbo.MT_ManagementGroup, and then click Open Table if you are using SQL Server 2005 or click
Edit Top 200 Rows if you are using SQL Server 2008.
Change the value in the
SQLServerName_6B1D1BE8_EBB4_B425_08DC_2385C5930B04 column to reflect the name of the new SQL Server-based computer.
Save your change
Configure the Operations Manager database with the name of the new Data Warehouse server as follows:
On the server that hosts the Operations Manager database, open SQL Server
Management Studio and navigate to Databases, OperationsManager, and then to
Tables.
Right-click
dbo.MT_DataWarehouse, and then select Open Table if you are using SQL Server 2005 or select
Edit Top 200 Rows if you are using SQL Server 2008.
Change the value in the
MainDatabaseServerName_16781F33_F72D_033C_1DF4_65A2AFF32CA3 column to the name of the new Data Warehouse server.
Close SQL Server Management Studio to save your changes.
"Fear disturbs your concentration" -
Data is not getting displayed in Management Console.
Hi Experts,
I am using BPC 7.5(M) SP04, Web server as IIS 7.0 and database server as SQL Server 2008 in Multi Server environment, Web Server is on Application Server (Windows Server 2008) and database server is on different machine.
I have configured the ODBC logging as documented in the install guide section : Setting Up ODBC Logging in IIS 7.0 for the Default Web Site and records are there in BPClog table of Appserver database but when I try to see data in Management console it doesn't show any data eg: It doesn't show any data after clicking "Who's Online" link under WebServer section of management console.
Do I need to do some more settings for getting the records display in Management Console.
Please Advice.
Thanks & Regards,
RohitHi Roberto,
I have gone through the OPS guide but still "Who is Online" link of management console is not showing any data, I tried giving date range in Start date/end date fields and clicked on "Reload" button but it gives error message:
LOGIN FAILED FOR USER 'NT AUTHORITY\ANONYMOUS LOGON'
Please Advice.
Thanks & Regards,
Rohit -
How to search the indexes in 11g Enterprise Manager Console
Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M -
A few queries regarding the beauty that is Nokia 5...
I got this beautiful lil machine a lil over a week back. It looks lovely, and sounds even better. And even though, being a student/intern, it cost me more than my monthly salary, I am mighty pleased I got it. And despite the opposition before, it's a great hit, both at home and work.
Just a few queries regarding the usage from my experience so far, the answers to which I could not find in this forum and a few other review sites. [Apologies if I'd missed something.]
1- First, the battery. It only lasts for a little over a day on full charge. From what I'd heard and read, it looked like it should last quite a bit a more, atleast 2 full days. The phone even hung up a couple of times, while recording/playing video. Upon which I had to remove and reinsert the battery. How seriously wrong is this ?
2- How do you forcefully exit an application, if need be ? It suggests in the guide, and from the reviews I read, there's supposed to be an exit and a start button with the applications when you bring up the task manager. Where're they?
3- There's this option where you can insert a Slideshow as your Wallpaper. But when I go to it, select the desired images, [ Tried various random images, yes ]it only shows Options and Back button, when select Back, it just goes, well, back. Nothing really happens to the wallpaper. How does that work ?
4- This might seem like a petty issue, but it can be pretty annoying. Once you go to Options and tell it you are marking, e.g. in the Inbox or the File Manager, how do you mark multiple items, WITHOUT having to go to Options >Mark >Mark/Unmark for each item ? What's the point of having a seperate Marking option in the first place then, when I could just Move or Delete each item seperately anyway.
5- And last, any news on a free full version of a document viewer ? From what I looked up, it costs around US$70, which is about a quarter of the phone's purchase price itself. And that's not a modest sum, that too for a basic application such as this, for a anyone with my status.
Just so any prospective buyer or amateur user such as myself doesn't get scared off by the seemingly long list of inquiries, the phone's an absolute pleasure to use. Specially, for someone with their first Touchscreen/Symbian experience. I got this phone after a LOT of research, both online and in the field. And it's bloody well worth it so far.
I know, it's a huge post, but you'd have my utmost gratitude for an accurately detailed response. Thankyou. =)
Solved!
Go to Solution.Why of course. Something happening to your phone during the process would brick it, not to mention that the attempt would install something in your phone that voids the warranty, meaning that you just made yourself a very expensive paperweight. ^_^. We're not really allowed to talk about it, other than the fact that with the above possibility, I strongly advise you not to do so. There is a way to do it without hacking it. I know of people who have managed to do it without hacking, but it was on the 5800. Hmm, ok, maybe they'll work for you too though.
http://forum.dailymobile.se/index.php/topic,4254.0.html
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
Hello,
after installing the nagios connecor and it doesn'work, i try to remove it; with the powershell command remove-SCOMConnector. After removing it, Get-SCOMConnector shows me, that it doesn't exist:
PS D:\> Get-SCOMConnector
Name : Network Monitoring Internal Connector
DisplayName : Connector for populating network devices.
Description :
Initialized : False
Name :
DisplayName :
Description :
Initialized : True
Name : SMASH Discovery Internal Connector
DisplayName : Connector for populating SMASH devices.
Description :
Initialized : False
Name : Operations Manager Internal Connector
DisplayName : A connector used by Operations Manager components to insert discovery data, please create your own connec
tor do not use this connector.
Description :
Initialized : False
But when i take a look to the connectors in Operations Manager Console, it hangs, after a while i have this error:
Date: 27.05.2014 10:04:43
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.EnterpriseManagement.ConnectorFramework.EnterpriseManagementConnector.Reconnect(EnterpriseManagementGroup managementGroup)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.GetUpdate(IndexTable indexTable, QueryUpdate`1 update, CacheCursor cursor, Range range, Int32 offset, Int32 groupLevel)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.GetUpdate(IndexTable indexTable, QueryUpdate`1 update)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.GetUpdate(CacheSession session, Boolean fullUpdate)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.FireUpdateEvent(CacheSession session, DateTime updateTime, Boolean dataChanged, Boolean fullUpdate, Boolean updatesOnly, IEnumerable queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.FireUpdateEvents(CacheSession session, Boolean dataChanged, Boolean fullUpdate, ICollection`1 queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.PostQuery(CacheSession session, IndexTable indexTable, UpdateReason reason, UpdateType updateType, Boolean dataChanged, DateTime queryTime, ICollection`1 queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.InternalSyncQuery(CacheSession session, IndexTable indexTable, UpdateReason reason, UpdateType updateType)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.InternalQuery(CacheSession session, UpdateReason reason)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.TryDoQuery(UpdateReason reason, CacheSession session)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
Can somebody help me fixing this error?
Strange.. the powerShell Command "get-SCOMConnector" works.. but the console hangs (on loading) when i want to show the connectors...
Kind regards
WolfgangHi,
I agree, we may need to remove the connector from OpsDB. In addition, here is blog regarding to the similar issue, hope it helps:
Error: “Object reference not set to an Instance of an Object” System Center Operation Manager 2012 Connector.
http://blogs.technet.com/b/birojitn/archive/2012/07/07/error-object-reference-not-set-to-an-instance-of-an-object-system-center-operation-manager-2012-connector.aspx
Regards,
Yan Li
Regards, Yan Li -
Hi Community,
I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment, we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
VMware machine running Windows Server 2008R2.
The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
Configuration
Supported?
Agent-less monitoring
No
After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
but it didn't matter how many times I try the servers never show up.
I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
--> http://technet.microsoft.com/en-us/library/hh212853.aspx
I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
I went to the Event Viewer and I found one particular event that caught my attention, see below :
Log Name: Operations Manager
Source: Health Service Modules
Date: 6/12/2014 12:48:19 PM
Event ID: 11551
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: MyManagementServer
Description:
Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Health Service Modules" />
<EventID Qualifiers="49152">11551</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
<EventRecordID>1945680</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>MyManagementServer</Computer>
<Security />
</System>
<EventData>
<Data>MyManagementServe</Data>
<Data>0x800706BA</Data>
<Data>The RPC server is unavailable.</Data>
</EventData>
</Event>
Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
My main goal is to have all the servers showing up in the Operations Manager Console.
So thanks all in advance !
Oscar LoriaSo you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you. -
Enterprise Manager Console in Ora10g?
Hey everyone... I
#1 Don't have memory to spare on my client's machine to run the EM website,
#2 Don't like it all that well anyway.
Is there any way to get Enterprise Manager Console (the Java version -- Originally called DBA Studio) back for 10g? Am I going to have to install Oracle 9i Client JUST for Enterprise Manager? Just wondering...Hello Mahendran,
> But in our new Oracle 10.2.0.4 there is no option like that
If you download the full oracle client (not the instant one), you have an option for installing the enterprise manager console. To be honest it is not exactly the same as the "old" enterprise manager .. but it looks like the same and if you don't use the whole enterprise manager functions it will be sufficient.
You also have the possibility to use a Web Interface with Oracle 10g. It is called Enterprise DB Console or if you want the whole framework it is called Grid Control.
http://www.dba-oracle.com/art_dbazine_freeman_10g_enterprise_manager_database_console.htm
Regards
Stefan -
Hello,
I'm reading documentation about Oracle10g, and I am a little bit confused. I have understood that it hasn't the Enterprise Manager Console and that the Administration task has to be executed from the OEM Grid Control (or OEM Database Control). But now, reading the "Advanced Replication 10g Release 2" (B14226-01) doc, in the 7th chapter it explains the Replication Management Tool in Oracle Enterprise Manager Console. So the question is: can I install the Enterprise Manager Console in the clients, if I have Oracle10g (10.2.0.1) in the server?
I would really appreciate any answer, because although I have tried using the Grid Control, I can't. I'm sorry but the Console GUI is much better for me.
Thanks in advance. Regards,
AranI take it you are looking for the old-style, java-based standalone EM Console. It is still around, but probably on it's way out.
You install it from the 10.2 Client media, which you can download from here. -
Oracle 10g Enterprise Manager Console bug?
I think I have come across a bug in the Oracle 10g Enterprise Manager Console. If I go into my database, then into the schema, select your schema from the list, then tables. Now once your in your tables, find one that you know of and know fairly well, right click it, and select the show dependencies. A small window will open with just that table and its tablespace and user. Select user, database name, profile, then default. If you right click on the "default" and select "show dependencies" a blank blinking window will open and stay stuck in an infinite loop until you kill the application window. I think that this is a cumbersome tablespace issue. Any thoughts?
Hi Ugonic
Sorry both are same, it's spelling mistake it's " WCMMISLINK". Acutally, my database is getting updated but this alert log is getting generated in enterprise manager console of 10g.
The sql statement is
CREATE MATERIALIZED VIEW ADASNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM ADA@WCMMISLINK;
CREATE MATERIALIZED VIEW BGTABSNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM BGTAB@WCMMISLINK;
The above query is sheduled to run every day .
and i get the following Alert log in 10g enterprise manager console
Generic Alert log ORA-12012: error on auto execute of job 54
ORA-04052: error occured when looking up remote object WCMM.SYS@WCMMSERVERLINK
ORA-00604: error occured at recursive SQL level 3
ORA-12514: tns no listener
ORA-06512: AT "SYS.DBMS_SNAPSHOT" line 1883
can you guid me why the above error are occuring
Regards
Niranjan -
Oracle 10g Enterprise Manager console giving Alert log
Dear all
I have One HP server running Oracle 10g on Redhat Enterprise Linux 3.0 and two other systems with Oracle 9i and 8i. I have written sql query in my Oracle10g system which updates the database in 9i.
The sql statement is
CREATE MATERIALIZED VIEW ADASNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM ADA@WCMMISLINK;
CREATE MATERIALIZED VIEW BGTABSNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM BGTAB@WCMMISLIN;
The above query is sheduled to run every day .
and i get the following Alert log in 10g enterprise manager console
Generic Alert log ORA-12012: error on auto execute of job 54
ORA-04052: error occured when looking up remote object WCMM.SYS@WCMMSERVERLINK
ORA-00604: error occured at recursive SQL level 3
ORA-12514: tns no listener
ORA-06512: AT "SYS.DBMS_SNAPSHOT" line 1883
can you guid me why the above error are occuring
the ORA-12514: tns no listener
the above error why it is occuring , then listener is running on oracle 10g server and other 8i and 9i server also and i am able to connect from oracle10g to other oracle 8i and 9i from sql plus and viceversa..
what could be the problem with tns listener
Regards
NiranjanHi Ugonic
Sorry both are same, it's spelling mistake it's " WCMMISLINK". Acutally, my database is getting updated but this alert log is getting generated in enterprise manager console of 10g.
The sql statement is
CREATE MATERIALIZED VIEW ADASNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM ADA@WCMMISLINK;
CREATE MATERIALIZED VIEW BGTABSNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM BGTAB@WCMMISLINK;
The above query is sheduled to run every day .
and i get the following Alert log in 10g enterprise manager console
Generic Alert log ORA-12012: error on auto execute of job 54
ORA-04052: error occured when looking up remote object WCMM.SYS@WCMMSERVERLINK
ORA-00604: error occured at recursive SQL level 3
ORA-12514: tns no listener
ORA-06512: AT "SYS.DBMS_SNAPSHOT" line 1883
can you guid me why the above error are occuring
Regards
Niranjan -
Oracle (R) Enterprise Manager Console Version 9.2.0.1.0 Error?
Hi
I just took over from someone the role of a DBA and I would like to clarify an issue I saw in Oracle (R) Enterprise Manager Console Version 9.2.0.1.0 Production.
My Default Temporary Tablespace, TEMP.DBF is currently sized at 6144 MB, Used size is 6140 MB, 99.93% with full auto extend on.
Automatically extend datafile when full (Auto extend) 20480 K Bytes.
Maximum Size - 8192 K Bytes. (------> Issue to clarify here<------)
I think most probably my ex-staff clicked wrongly and chose "K Bytes". It should be "M Bytes". However, I would like to know how is it possible that OEM console Version 9.2.0.1.0 allows the Maximum Size (8192 K Bytes) to be below 6144 MB? Is this allowed? If so and left uncheck, what will the repercussion be on the TEMP tablespace?
Has anyone ever come across this issue?
Regards
HahnhahnhahnSee an small example below
"Tablespace Created"
SQL> create temporary tablespace temp_test tempfile 'C:\ORACLE\APP\ORADATA\CKPT\temp_test01.tmp' size 100m autoextend on
next 10m maxsize 200m;
Tablespace created.
SQL>
"check below size, user bytes,maxsize"
TABLESPACE_NAME FILE_NAME BYTES/1024/1024 USER_BYTES/1024/1024 MAXBYTES/1024/1024 AUT
TEMP_TEST C:\ORACLE\APP\ORADATA\CKPT\TEMP_TEST01.TMP "100 99 200" YES
SQL>
"Now resized to more than maxsize so further maxsize supprssed"
SQL> alter database tempfile 'C:\ORACLE\APP\ORADATA\CKPT\TEMP_TEST01.TMP' resize 250m;
Database altered.
SQL> select tablespace_name,file_name,bytes/1024/1024,user_bytes/1024/1024,maxbytes/1024/1024,autoextensible from dba_temp_files where tablespace_name='TEMP_TEST';
TABLESPACE_NAME FILE_NAME BYTES/1024/1024 USER_BYTES/1024/1024 MAXBYTES/1024/1024 AUT
TEMP_TEST C:\ORACLE\APP\ORADATA\CKPT\TEMP_TEST01.TMP "250 249 200 YES"
SQL>
Now Bytes is more than Maxsize , its common behaviour of oracle database. When you resize tempfile, you have to again mention what is the maxsize. -
Cache/Refresh Problem in Crystal Management Console 10..
Hi All
I have suffering from very major problem related to Data refresh....
I m using CR IX as a design Crystal report and Crystal Management console 10 as a Crystal Report Server....
The Problem is that : After Publishing Report On Report Server(CMC) i m calling through my report by the help of reportId which was generated during Publishing Report : So If My report containing Two Parameter the i pass two Parameter value from my Front end as ....
http://<server>/crystal/enterprise10/admin/en/viewrpt.cwr?init=java&apsuser=administrator&apspassword=&apsauthtype=secEnterprise&id=2363&PROMPT0=1914&PROMPT1=GARETH%20%20%20MASON&PROMPT2=canada
but the problem is that If any user Update any value on database and after updation again he check to crystal report ,but it not reflect in Crystal Report....
second problem is:
there is a yellow button display ON CMC ,if user click on this button and change the parameter value it change but again user call report from front end it shows previous value which he entered through click on Yellow Button...
I have checked all option on Crystal report Like Unckeck Option Save Report with data ....
But Still I m facing such Problem ......Please Provide me Proper solution...
should I need to change Setting of Crystal Configuration Manager .....
I need Your Assistance.....
Regards
Ankit shuklaHi Nakul
Thanks For your response...
The URL Which I mention was as example for calling report from Report server...In My form I m using two Drop down
(1) Country Name : List Of different country
(2) Client Name : List Of Different client
If I select Country India and Client ankit Then In My URL display Prompt 0 =India & Prompt 1=Ankit
and data display For such record....
But When I change Country Name : UK And Client =Steban then In My URl display Prompt0=UK & Prompt1=Steban
But Report Contains Previous Record Of Ankit & India..
So It means My Parameter value are changing dynamically but Cache Server Of CMC are not refresh when i Click On Refresh Button which are displaying in Viewer the report Data are reflecting....
So Please Provide me solution for given above problem.....
Do I need to change Crystal Configuration Management Setting ....but i don't know how it will be...
So Please give me any solution ...
Regards
Ankit Shukla -
SMC - Solaris Management Console in whole root zone
Hi,
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.
Thanks...Hi dnzrnd,
dnzrnd wrote:
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.SunMC should install and run fine in a whole-root zone: I haven't heard of any problems. Are you maybe confusing "Sun Management Center" (this forum) with "Solaris Management Console" (a different product)?
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !! -
Solaris Management Console in whole root zones
Is it possible to run smc in whole root zone? Is there a howto for this? I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.Hi dnzrnd,
dnzrnd wrote:
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.SunMC should install and run fine in a whole-root zone: I haven't heard of any problems. Are you maybe confusing "Sun Management Center" (this forum) with "Solaris Management Console" (a different product)?
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!
Maybe you are looking for
-
In XI how we do Trouble shooting?
In XI how we do Trouble shooting?
-
I want to know how to backup my library to a fixed backup drive rather than to a CD or DVD. I mostly have audiobooks in the library and my computer is running out of space. There are so many that copying them to a CD or DVD would be a horrendous wast
-
How to hide database parameters report ?
Post Author: xaviert CA Forum: Publishing HelloI use CR XI R2 Developer on my computer and offered version of BO XI SP3 with five users named on Windows 2003 server All reports are based on Oracle 10G database with the same server, user and password
-
New Computer - Updated iPod - Syncing Issues
Greetings! I bought a new computer in January. At that time, I transferred my songs over to my new computer from my old computer using a cross over cable. At that point, both of my iTunes libraries were the same. Since then I downloaded more songs an
-
I am trying to convert VISIO file to PDF format. VISIO file has multiple pages/tabs for creating wireframes. When I convert this visio file to PDF document, the page/tab structure of VISIO file is lost and it appears as a multi page PDF document. Is