Query about date comparison

Hi,
I have a database table with a date field called 'ENDDAT'
How do I write a select query that selects all records whose difference between sy-datum and 'ENDDAT' is greater than 7.
If I do the normal date comparison for eg.
select * from <databasetable> where enddat - sy-datum > 7
or
select * from <databasetable> where (enddat - sy-datum) > 7
It throws error that '-' is not a valid comparison operator.
Can anyone help????

I've never seen that done before. You can do as joseph has suggested.   If you can do it in the select statement, I'm not really sure that you'd want to put that kind of processing on the database.
data: begin of itab occurs 0,
      enddat type sy-datum,
      end of itab.
select * into corresponding fields of table itab
       from <databasetable> .
data: cdatum type sy-datum.
Loop at itab.
cdatum = enddat - sy-datum
* if <= 7, then delete from itab.
if cdatum <= 7.
delete itab.
endif.
endloop.
Regard,
Rich Heilman

Similar Messages

Query about data fetched by MB51 report

Hi Gurus,
I am raising this discussion for better understanding about this issue.
I deliberately created a material doc. in MIGO with 311 mov.type, on today's date. Keeping the destination and supplying storage location same.
It shows a warning message M7104. that both s.locs are same and creates a doc after accepting the message.
The doc. in created as I can see in mb03 and in MSEG table but MB51 does not list this doc.
I am using MB51 , giving material, posting dates(today +/- 30 days), It does not list the material doc.
Can anyone suggest a note for this? OR explain what MB51 checks in the tables to fetch and filter material doc.
I ensure, I am using correct parameters in MB51.
Many Thanks!!
Regards,
Umang

MB51 reads the table MKPF and MSEG, if you selection criteria does match with these table entries, then you can see the entry in MB51 list.
Please post the screen shot of material document number from MIGO and post the screen shot of selection criteria of MB51.

Query about data source 0fc_bp_items

Hi,
I have a requirement in which i have to show the open items, module is FI-CA, i have zerored in on two datasource 0FC_BP_ITEMS and 0FC_OP_01. Our logic is such that we have to extract the data from DFKKOP and DFKKOPW (contains the data about breakdown ).
Kindly tell me which datasource will satisfy my requirement best or i have to go for Z develpoment.

Hi Jason,
Check this below link:
http://help.sap.com/saphelp_nw70/helpdata/en/27/42073e774a4329b6dd6bab21eef613/content.htm
Regards,
Arvind

Select Query with Date comparison

Hi all,
I need to select data from Infotypes based on AEDTM.
I have an internal table which has all the records from IT0000.
I am looping into this internal table and then select data fom It0001 and IT0002 depending on the AEDTM of it0000.
loop at it_0000 into wa_0000
select * from Pa0001 into it_0001
where pernr = wa_0000-pernr
and aedtm LE wa_0000-aedtm.
endloop.
All records from IT0001 are not getting fetched.
Only records for condition aedtm = wa_0000-aedtm are getting fetched not for 'less than'.
Please let me know how this can be achieved or any pointers in this case.
Thanks,
Saher

Hi,
As per your logic,
Loop at it_0000.
select * from Pa0001 into it_0001
where pernr = it_0000-pernr
and aedtm <= it_0000-aedtm.
endloop.
Here the internal table it_0001 will not be appened automatically each time you run through the loop.
At the first loop for it_0000-aedtm = '20090611', the corresponding fields will be fetched.
Wnen the second loop starts for it_0000-aedtm = '20090706', the internal table fields will be replaced and it wont be appended.
Therefore after the whole loop only fields corresponding to it_0000-aedtm <= '20090806' will be present in it_0001.
Also this logic is not advisable.
As suggested use this
select * from Pa0001 into it_0001
for all entries in it_0000
where pernr = it_0000-pernr
and aedtm <= it_0000-aedtm.
which will give the correct values.
Regards,
Vikranth

Query about Data Model Design, UPDATED_ON

hi on a *.ppt called ODTUG2007_Advanced_APEX.ppt, that i found on google <www.oracle.com/technology/products/database/application_express/ppt/ODTUG2007_Advanced_APEX.ppt>, i found a something that might be very interesting in using in my APEX app... it said something about some Standard Columns, and "phrases" (created_by, created_on, updated_by, updated_on) that i would like to see and learn how to implement.
So i do appreciate if anyone has got an example, or can explain them to me...
Best regards.
Jaison González

Jaison,
There's another way to do that might work for you:
1. Create the fields updated_by and updated_on in the table;
2. Create in the page the items PX_UPDATED_BY and PX_UPDATED_ON of type "Text field (saves state)";
3. Go to the properties of the item.
PX_UPDATED_BY
Source:
- Source Type: Database column;
- Source Value or expression: updated_by
- Post Calculation Computation: :APP_USER
Default:
- Default value: &APP_USER.
PX_UPDATED_ON
Source:
- Source Type: Database column;
- Source Value or expression: updated_on
Default:
- Default value: sysdate
- Default value type: PL/SQL Expression
When the user submits the changes, the table fields are updated.
Regards,
Ricardo Stumpf
Brasília - Brazil
Message was edited by:
Stumpf

Weird problem with mysql query and data table buttons !!!!

Hi,
I'm using jsc 2 update 1 on windows and mysql 4.1 . I have a page with a data table. One column of the data table contains "Details" buttons.
Source query for the table is :
SELECT tbl_tesserati.idtbl_tesserati idTesserato,
tbl_tesserati.num_tessera,
tbl_tesserati.nome,
tbl_societa.codice_meccanografico
FROM tbl_tesserati
INNER JOIN tbl_rel_tesserato_discipline_societa ON tbl_tesserati.idtbl_tesserati = tbl_rel_tesserato_discipline_societa.id_tesserato
INNER JOIN tbl_cariche ON      tbl_rel_tesserato_discipline_societa.id_carica = tbl_cariche.idtbl_cariche
INNER JOIN tbl_qualifiche ON      tbl_rel_tesserato_discipline_societa.id_qualifica = tbl_qualifiche.idtbl_qualifiche
INNER JOIN tbl_discipline ON      tbl_rel_tesserato_discipline_societa.id_disciplina = tbl_discipline.idtbl_discipline
INNER JOIN tbl_societa ON      tbl_rel_tesserato_discipline_societa.id_societa = tbl_societa.idtbl_societa
LEFT JOIN tbl_province ON tbl_societa.provincia_sede_sociale = tbl_province.idtbl_province
LEFT JOIN tbl_comuni ON tbl_societa.comune_sede_sociale = tbl_comuni.idtbl_comuni
LEFT JOIN tbl_rel_tesserato_discipline_praticate ON tbl_rel_tesserato_discipline_praticate.tessera_id=
tbl_rel_tesserato_discipline_societa.idtbl_rel_tesserato_discipline
LEFT JOIN tbl_discipline_praticate ON tbl_discipline_praticate.idtbl_disciplina_praticate=tbl_rel_tesserato_discipline_praticate.disciplina_praticata_id
WHERE
tbl_tesserati.cognome LIKE ?
AND tbl_tesserati.nome LIKE ?
AND tbl_rel_tesserato_discipline_societa.id_societa LIKE ?
AND tbl_tesserati.idtbl_tesserati LIKE ?
AND tbl_cariche.idtbl_cariche LIKE ?
AND tbl_qualifiche.idtbl_qualifiche LIKE ?
AND tbl_tesserati.data_nascita >= ?
AND tbl_tesserati.data_nascita<= ?
AND tbl_discipline.idtbl_discipline LIKE ?
AND codice_affiliazione LIKE ?
AND tbl_societa.denominazione LIKE ?
AND YEAR(tbl_rel_tesserato_discipline_societa.data_scadenza) LIKE ?
AND (tbl_province.nome LIKE ? OR tbl_province.nome IS NULL)
AND ( tbl_comuni.nome LIKE ? OR tbl_comuni.nome IS NULL)
The tbl_tesserati.data_nascita is a mysql date field.
The click event handler code for the "Details" Button is:
public String btnModificaTesserato_action() {
        try{
            TableRowDataProvider rowData= (TableRowDataProvider)getBean("currentRowTesserati");
            getRequestBean1().setId_tesserato((Long)rowData.getValue("idTesserato"));
        } catch(Exception ex) {
            log("errore nella query",ex);
        return "dettaglioTesseratoSocieta";
    }When i run the project and open the page the table is correctly rendered and populated with some rows. But when i click on details button nothing happens, the page is simply reloaded.
If i set a breakpoint in the code line TableRowDataProvider rowData= (TableRowDataProvider)getBean("currentRowTesserati");the debbuger does not stop the code execution ! As if the button was never clicked!
I tried to modify the source query to :
SELECT tbl_tesserati.idtbl_tesserati idTesserato,
tbl_tesserati.num_tessera,
tbl_tesserati.nome,
tbl_societa.codice_meccanografico
FROM tbl_tesserati
INNER JOIN tbl_rel_tesserato_discipline_societa ON tbl_tesserati.idtbl_tesserati = tbl_rel_tesserato_discipline_societa.id_tesserato
INNER JOIN tbl_cariche ON      tbl_rel_tesserato_discipline_societa.id_carica = tbl_cariche.idtbl_cariche
INNER JOIN tbl_qualifiche ON      tbl_rel_tesserato_discipline_societa.id_qualifica = tbl_qualifiche.idtbl_qualifiche
INNER JOIN tbl_discipline ON      tbl_rel_tesserato_discipline_societa.id_disciplina = tbl_discipline.idtbl_discipline
INNER JOIN tbl_societa ON      tbl_rel_tesserato_discipline_societa.id_societa = tbl_societa.idtbl_societa
LEFT JOIN tbl_province ON tbl_societa.provincia_sede_sociale = tbl_province.idtbl_province
LEFT JOIN tbl_comuni ON tbl_societa.comune_sede_sociale = tbl_comuni.idtbl_comuni
LEFT JOIN tbl_rel_tesserato_discipline_praticate ON tbl_rel_tesserato_discipline_praticate.tessera_id=
tbl_rel_tesserato_discipline_societa.idtbl_rel_tesserato_discipline
LEFT JOIN tbl_discipline_praticate ON tbl_discipline_praticate.idtbl_disciplina_praticate=tbl_rel_tesserato_discipline_praticate.disciplina_praticata_id
WHERE
tbl_tesserati.cognome LIKE ?
AND tbl_tesserati.nome LIKE ?
AND tbl_rel_tesserato_discipline_societa.id_societa LIKE ?
AND tbl_tesserati.idtbl_tesserati LIKE ?
AND tbl_cariche.idtbl_cariche LIKE ?
AND tbl_qualifiche.idtbl_qualifiche LIKE ?
AND tbl_tesserati.data_nascita >= ?
OR tbl_tesserati.data_nascita<= ?
AND tbl_discipline.idtbl_discipline LIKE ?
AND codice_affiliazione LIKE ?
AND tbl_societa.denominazione LIKE ?
AND YEAR(tbl_rel_tesserato_discipline_societa.data_scadenza) LIKE ?
AND (tbl_province.nome LIKE ? OR tbl_province.nome IS NULL)
AND ( tbl_comuni.nome LIKE ? OR tbl_comuni.nome IS NULL)
Using this query everything works well !! The click handler works and the debugger too !!
I changed only the AND in OR !!!
I also tried to change mysql-x-x-connector driver but without solving my problem.
Can someone help me ?
Thanks
Giorgio

You'll find that it is more to do with the way MySql deals with dates than anything else! Depending on how your date field is setup, then try using a BETWEEN statement for those 2 lines in your first query e.g.
AND ( tbl_tesserati.data_nascita BETWEEN ? AND ?)
The date column needs to be in the ISO format to work. If you examine your second query output, you might discover that the output is only going to refer to one parameter (probably the OR one). Did you manage to view the output logs from the application server? You would have got an idea from there with a message like stating a conversion error'.
Alternatively, you could try using the to_days() function and convert it directly to a number which would be a lot easier to deal with. For example:
AND to_days(tbl_tesserati.data_nascita >= ? )
AND to_days( tbl_tesserati.data_nascita<= ? )
Or try the BETWEEN version with to_days() and see what you get.
More info about date formatting (v5) here:
http://dev.mysql.com/doc/refman/5.0/en/date-and-time-functions.html#function_to-days
Before I forget, sometimes you may need to treat dates as Strings rather 'Long' as you did.
As a matter of interest, did you try your query in a different piece of software?
If my queries are a little more complicated, I tend to try MySql queries out in the free MySql query browser and also double check in another to verify certain issues. I found it easier to develop SQL in a seperate program then import the final version to JSC making the required modifications for parameters.
Message was edited by:
aerostra

Error when querying OLAP data with BI answers

Have been doing all the Lessons in "Using Oracle OLAP With Oracle BI Enterprise Edition 10g Release 3". Got till lesson 3 where I'm supposed to query the data with Answers but If I add any of the facts to the report, I get the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17003] Oracle gateway error: Unsupported data type 101. (HY000)
SQL Issued: SELECT Customer."Ship To" saw_0, Measures.COST saw_1 FROM Global ORDER BY saw_0
So I was wondering if anyone knows what the catch could be.
Thanks in advance!

Yes. Me too. I have the same issue and I don't find any information about it. Could anyone help ?

Problem inserting and querying XML data with a recursive XML schema

Hello,
I'm facing a problem with querying XML data that is valid against a recursive XML Schema. I have got a table category that stores data as binary XML using Oracle 11g Rel 2 on Windows XP. The XML Schema is the following:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:complexType name="bold_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="keyword_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
               <xs:element name="plain_text" type="xs:string"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="emph_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="text_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="parlist_type">
          <xs:sequence>
               <xs:element name="listitem" minOccurs="0" maxOccurs="unbounded" type="listitem_type"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="listitem_type">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="parlist" type="parlist_type"/>
               <xs:element name="text" type="text_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:element name="category">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="name"/>
                    <xs:element name="description">
                              <xs:complexType>
                                        <xs:choice>
                                                       <xs:element name="text" type="text_type"/>
                                                       <xs:element name="parlist" type="parlist_type"/>
                                        </xs:choice>
                              </xs:complexType>
                    </xs:element>
                                                            </xs:sequence>
                                                            <xs:attribute name="id"/>
                                        </xs:complexType>
                    </xs:element>
</xs:schema>I registered this schema and created the category table. Then I inserted a new row using the code below:
insert into category_a values
(XMlElement("category",
      xmlattributes('categoryAAA' as "id"),
      xmlforest ('ma categ' as "name"),
      (xmlelement("description", (xmlelement("text", 'find doors blest now whiles favours carriage tailor spacious senses defect threat ope willow please exeunt truest assembly <keyword> staring travels <bold> balthasar parts attach </bold> enshelter two <emph> inconsiderate ways preventions </emph> preventions clasps better affections comes perish </keyword> lucretia permit street full meddle yond general nature whipp <emph> lowness </emph> grievous pedro')))
The row is successfully inserted as witnessed by the results of row counting. However, I cannot extract data from the table. First, I tried using SqlPlus* which hangs up and quits after a while. I then tried to use SQL Developer, but haven't got any result. Here follow some examples of queries and their results in SQL Developer:
Query 1
select * from category
Result : the whole row is returned
Query 2
select xmlquery('$p/category/description' passing object_value as "p" returning content) from category
Result: "SYS.XMLTYPE"
now I tried to fully respect the nested structure of description element in order to extract the text portion of <bold> using this query
Query 3
select xmlquery('$p/category/description/text/keyword/bold/text()' passing object_value as "p" returning content) from category_a
Result: null
and also tried to extract the text portion of element <text> using this query
Query 4
select xmlquery('$p/category/description/text/text()' passing object_value as "p" returning content) from category_a
Result: "SYS.XMLTYPE".
On the other hand, I noticed, from the result of query 1, that the opening tags of elements keyword and bold are encoded as the less than operator "<". This explains why query 3 returns NULL. However, query 4 should display the text content of <text>, which is not the case.
My questions are about
1. How to properly insert the XML data while preserving the tags (especially the opening tag).
2. How to display the data (the text portion of the main Element or of the nested elements).
The problem about question 1 is that it is quite unfeasible to write a unique insert statement because the structure of <description> is recursive. In other words, if the structure of <description> was not recursive, it would be possible to embed the elements using the xmlelement function during the insertion.
In fact, I need to insert the content of <description> from a source table (called category_a) into a target table (+category_b+) automatically .
I filled category_a using the Saxloader utility from an flat XML file that I have generated from a benchmark. The content of <description> is different from one row to another but it is always valid with regards to the XML Schema. The data is properly inserted as witnessed by the "select * from category_a" instruction (500 row inserted). Besides, the opening tags of the nested elements under <description> are preserved (no "<"). Then I wrote a PL/SQL procedure in which a cursor extracts the category id and category name into varchar2 variables and description into an XMLtype variable from category_a. When I try to insert the values into a category_b, I get the follwing error:
LSX-00213: only 0 occurrences of particle "text", minimum is 1which tells that the <text> element is absent (actually it is present in the source table).
So, my third question is why are not the tags recognized during the insertion?
Can anyone help please?

Hello,
indded, I was using an old version of Sqlplus* (8.0.60.0.0) because I had a previous installation (oracle 10g XE). Instead, I used the Sqlplus* shipped with the 11g2database (version 11.2.0.1.0). All the queries that I wrote work fine and display the data correctly.
I also used the XMLSERIALIZE function and can now display the description content in SQL Developer.
Thank you very much.
To answer your question Marco, I registered the XML Schema using the following code
declare
doc varchar2(4000) := '<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:complexType name="bold_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="keyword_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
               <xs:element name="plain_text" type="xs:string"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="emph_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="text_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="parlist_type">
          <xs:sequence>
               <xs:element name="listitem" minOccurs="0" maxOccurs="unbounded" type="listitem_type"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="listitem_type">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="parlist" type="parlist_type"/>
               <xs:element name="text" type="text_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:element name="category">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="name"/>
                    <xs:element name="description">
                              <xs:complexType>
                                        <xs:choice>
                                                       <xs:element name="text" type="text_type"/>
                                                       <xs:element name="parlist" type="parlist_type"/>
                                        </xs:choice>
                              </xs:complexType>
                    </xs:element>
                                                            </xs:sequence>
                                                            <xs:attribute name="id"/>
                                        </xs:complexType>
                    </xs:element>
</xs:schema>';
begin
dbms_xmlschema.registerSchema('/xmldb/category_auction.xsd', doc,     LOCAL      => FALSE,
        GENTYPES   => FALSE, GENBEAN    => FALSE,   GENTABLES => FALSE,
         FORCE      => FALSE,
         OPTIONS    => DBMS_XMLSCHEMA.REGISTER_BINARYXML,
         OWNER      => USER);
end;then, I created the Category table as follows:
CREATE TABLE category_a of XMLType XMLTYPE store AS BINARY XML
    XMLSCHEMA "xmldb/category_auction.xsd" ELEMENT "category";Now, there still remains a problem of how to insert the "description" content which I serialized as a CLOB data into another table as XML. To this purpose, I wrote a view over the Category_a table as follows:
CREATE OR REPLACE FORCE VIEW "AUCTION_XWH"."CATEGORY_V" ("CATEGORY_ID", "CNAME", "DESCRIPTION") AS
select category_v."CATEGORY_ID",category_v."CNAME",
XMLSerialize(content ( xmlquery('$p/category/description/*' passing object_value as "p" returning content)) as clob) as "DESCRIPTION"
from auction.category_a p,
xmltable ('$a/category' passing p.Object_Value as "a"
columns category_id varchar2(15) path '@id',
          cname varchar2(20) path 'name') category_v;Then, I wrote a procedure to insert data into the Category_xwh table (the source and target tables are slightly different: the common elements are just copied wereas new elements are created in the target table). The code of the procedure is the following:
create or replace PROCEDURE I_CATEGORY AS
v_cname VARCHAR2(30);
v_description clob ;
v_category_id VARCHAR2(15);
cursor mycursor is select category_id, cname, description from category_v;
BEGIN
open mycursor;
loop
/*retrieving the columns*/
fetch mycursor into v_category_id, v_cname, v_description ;
exit when mycursor%notfound;
insert into category_xwh values
(XMlElement("category",
      xmlattributes(v_category_id as "category_id"),
      xmlelement("Hierarchies", xmlelement("ObjHierarchy", xmlelement ("H_Cat"),
                                                           xmlelement ("Rollsup",
                                                                              (xmlelement("all_categories",
                                                                               xmlattributes('allcategories' as "all_category_id")))
    xmlforest (
              v_cname as "cat_name",
              v_description as "description")
end loop;
commit;
close mycursor;
END I_CATEGORY;When I execute the procedure, I get the following error:
LSX-00201: contents of "description" should be elements onlyso, I just wonder if this is because v_description is considered as plain text and not as XML text, even if its content is XML. Do I need to use a special function to cast the CLOB as XML?
Thanks for your help.
Doulkifli

Oracle 10g Query on Date Column

Hello -
What is the most efficient way to query on a date column to get all dates within the last 2 months? I use something like the following in the WHERE clause:
billing_date >= to_date(add_months(sysdate, -2))
However, I can't ever get the index on billing_date to be used.
Any help is greatly appreciated...
Thanks!!

This is a perfectly valid way to query the data. Here's an example on my own production tables. This one has about 300 million rows:
select *
from   prod.tran_history
where tran_date >= to_date(add_months(sysdate, -2))
| Id | Operation                   | Name                        | Rows | Bytes | Cost |
|   0 | SELECT STATEMENT            |                              |    11M|   863M|   146K|
|   1 | TABLE ACCESS BY INDEX ROWID| TRAN_HISTORY                 |    11M|   863M|   146K|
|* 2 |   INDEX RANGE SCAN          | TRAN_HIST_DATE_IDX           | 2144K|       | 2098 |
--------------------------------------------------------------------------------------------

Query about local storage

Hi,
     i had a query about local storage.
     I've a machine that hosts weblogic and tangosol. i've an ejb that accesses a distributed cache i.e NamedCache cache = CacheFactory.get("MyCache")
     i modified tangosol-coherence.xml and set local-storage to false ( for distributed cache) and replaced the file in coherence.jar.
     i'm using an overflow scheme and the back map uses a disk scheme.
     i also start a separate standalone instance of tangosol and i set the system property of local storage to true for the standalone instance.
     i start the standalone instance first and then weblogic.
     The idea is ensure that the tangosol instance in weblogic or the weblogic JVM should not participate in storing data (hence local storage false).
     only the JVM for the standalone instance should store data (hence local storage true -system property).
     i wanted to know whether the property "local-storage" is pertinent to a member(machine) or to a JVM?
     the reason for this doubt: as i'm using a disk scheme, tangosol creates a file for an overflow (e.g lh014402~.tp). i can see two such files when ideally i would have wanted only one for the tangosol instance.
     -rw-r--r-- 1 zephyr users 8364032 2005-06-23 17:02 lh014402~.tp
     -rw-r--r-- 1 zephyr users 8364032 2005-06-23 17:02 lh014403~.tp.
     can you please let me know if we can configure tangosol in such a way that we can two separate instances running with local stroage false for one and true for the other?
     Awaiting your reply
     Thanks
     Vinay

I would suggest leaving the default 'local-storage' value set to 'true' in the tangosol-coherence.xml and just use the JVM argument to control the local storage of each individual node. Then start the stand alone instance normally (I assume you are using the com.tangosol.net.DefaultCacheServer) and start the WebLogic instance with the following:
     java [...] -Dtangosol.coherence.distributed.localstorage=false [...]
     Hope this helps.
     Later,
     Rob Misek
     Tangosol, Inc.

Can't query sql data

I'm connecting fine to a SQL DB. Used the "help" sample in LS 8.0 help to enter an ID that should query the data for a specific data set. Using "click" and "FormCalc", I get an error. This is my code:
//Change the commandType from TABLE to TEXT. TEXT
//is the equivalent of SQL Property
$sourceSet.DataConnection.#command.query.commandType = numeric
//Set the Select Node. Select in this case will be
//whatever SQL Property you want
$sourceSet.DataConnection.#command.query.select.nodes.item(0).value = Concat(Select*from licenses Where userid = , ListBox1.rawValue,)
//Reopen the Data connection
$sourceSet.DataConnection.open()
I've tried the Javascript version of this, and I get no error, but nothing at all happens.
Help??

- Help | About | Version:
Java(TM) Platform     1.6.0_14
Oracle IDE     3.1.07.42
Versioning Support     3.1.07.42
- Help | About | Properties:
java.home     C:\Program Files\Java\jdk1.6.0_14\jre
jdbc.driver.home     /C:/ORACLE/product/10.2.0/client_1/
jdbc.library     /C:/ORACLE/product/10.2.0/client_1/jdbc/lib/ojdbc6.jar
- running <sqldevelope>\sqldeveloper\bin\sqldeveloper.exe:
popup blank console but no msg. in it.
Thanks for the tips! Yesterday I configured apache tomcat and copied ojdbc into it's
library, maybe copy wrong folder at that time. I just removed ojdbc6 and keep ojdbc14
in oracle jdbc library. After it, now the sql developer can start successfully!
Many thanks!

OBIEE Date Comparison report with multiple measures

Hello everyone...
I have a requirement where I need to create a date comparison report (Current Month vs. Prior Month vs Prior Month Year Ago vs YTD vs Prior YTD vs Rolling 3 months, etc) with multiple Measures (Quote count, Quote offered count, New Business count, etc). I am to generate this report in this fashion:
Quotes Current Month vs PM vs YoY Prior
Month Current Month Prior Year Current
YTD vs PM Prior
YTD Rolling 3 Months vs PM Prior Rolling 3 Months
Issued 120 120 123 1400 1020 1700 1580
Unique Risks
Offered 556 449 571 5881 6220 6101 5892
Unique Risk Close Ratio
Offered Close Ratio 21.6% 26.7% 21.5% 23.8% 16.4% 27.9% 26.8%
Bitmap
Avg Issued Premium 240 238 222 2801 2630 3104 2892
Avg Offered Premium
New Business
Count
Avg Full Term Premium
I understand that time series is an option, and have created the time series (which show up as measures).
My problem is:
when creating the report (even as a pivot table) , OBIEE is not allowing me to drag the measure to rows, nor is it allowing me to drag the time series to columns. Also, I need to do conditional formating on some of the columns showing an up arrow for increased vs. prior month and down arrow for decreased vs. prior month.
Does anyone have a solution for this issue? Any assistance would be greatly appreciated...
Please advise and thanks!!!

Jason,
You've been very helpful, but I guess I'm just not explaining myself that well. The Credit Memo's throw things off because they do not contain a "Paid Date" value. That field in the record is blank. Since it is blank the report query ignores them. Therefore when the report query returns all records that have a "Paid date" range of "x to y" they are never returned. This is a problem whenever a credit memo exists for an invoice because the "invoice total" never changes. So when a customer pays on their account for a particular invoice, they only pay what is due which is the "invoice total" minus any "credit" from the "Credit Memo". So when my A/R person receives payment they are showing the invoice paid in full because MAS automatically includes all invoices and credit memo's. My report does not because there is no data in the "Paid Date" field of the record for Credit Memos.
I've been doing alot research in trying to resolve this "exception" to my report. I think I may be on to something, but my knowledge of arrays is extremely limited. My resolution involves populating an array with the "invoice numbers" that are returned from the initial query from the supplied date range. Then using the "invoice numbers" from the array have it then populate my details section of the report with all of "invoice records" both the actual invoice record and any "credit memo" records. I can then group the records returned based upon the "invoice number". then within that grouping I can performing my calculations to show whether or not the invoice has been paid in full. What do you think? I've been able to populate an array with the invoice numbers based upon my date search range, but I have yet to figure out how to take that information and perform another lookup to pull in the rest of the data I need. Do you have any ideas?
Thanks. Bill

InfoSet Query no data returned

Hi,
I've created InfoSet Query and Query respectively for the same InfoSet. However, only Query returns data and the InfoSet Query returns no data.
Best regards,
ts

Hi Venkat,
This is BW forum and never post/include your issue in other threads.
if your facing problem about plant data then please post your issue at SAP MM forum.
MM forum link can find below link.
SCN Site Index
How to create a discussion:
http://scn.sap.com/docs/DOC-46003
Thanks

Big Troubles on designing Query about special customers' counting

Hello buddies:
I meet a problem on designing Query about special customers' counting. Let me describe the requirment first. I want to create a query with BEX , and there is a key figure with very special logic.
That is: to list the counts of the customers which has more than one sales records in a time period from sales data.
For example :
when the user excute the query , he or she must input a time period ( 2007.01~2007.03 e.g)
then the query output as follow:
District          Cust-sount
North-Zone       100
South-Zone      120
The Main trouble are :
1. Threr are no document number in the detail of sales data document records. so I could not count the sales times with document number.
2. The time period is not fixed value, it depends on the user's input, so I can not define the counting logic in the update rule or in the query with fixed time period.
Anybody who met similar requirement pls show me your hand and give your solutions, thanks very much.
Jason

Hi,
    Your solution sounds a good way to count the distinct customers. but in my case, one salse line item must not be recognize as one sales record, instead, one customer's all sales line items occurs in one day must be recognize as one sales record ( or we say that one sales behavior).
for example:
customer     product    quantity   date
cust001       prod001        10       2007.06.06
cust001       prod002        20       2007.06.06
the two line items above means one sales record for the customer "cust001".
so I could not simply use the CKF : (( Counter ) *FV2 ) > 1 .
Best Regards,
Jason

Query in data block

hi,
whether it's possible to write query in data block other than trigger.(i.e,.. data block created by the Wizard and executing a simple query over the data block based on a table)
regards
Yesukannan

if i am right about u question , you can change your datablock sorce prooperty to QUERY and in soruce wirte ur query
Block Property
Database source- Query
source table name:- write u query

Query about date comparison

Similar Messages

Maybe you are looking for