Query Builder accepts not more than 60 fields in a single dataset

Query Builder accepts not more than 60 fields in a single dataset. Once we try to enter 61st field - it pops up with a message. Is there some setting that we need to change.
Please help me.
Thanx & Regards,
Rajeev Goel

Similar Messages

Fill more than one DataTable with single DataSet

Hello,
I would like to make a single trip to Oracle (using ODT.NET) to fill two DataTables in a single DataSet. How do I specify the Oracle Select command? I tried with a plus:
select * from customers + select * from products
I tried with/out quotes and with/out semicolon at end of each select. The error is SQL command not ended properly
Thanks,
Kim

I don't think you can do this, at least I've never done this before.

How to restrict the delivery quantity not more than target quantity?

Dear Gurus,
How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
Any other effective method? Please advice. Thanks.
Regards,
David

Dear all,
It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
I think there must be somewhere besides of those you menetioned.
I notes that SAP help for the overdelivery tollerance setting of scheduling agreement:
Overdelivery Tolerance Limit
Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
Dependencies
If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
Pls help! Thanks.
Regards,
David

Got SQL *Plus query output in more than one in a single page

Hi All,
I have write a SQL *Plus code for execute one SQL query and registered as concurrent program. But I have got the output more than once in a single page after running the concurrent program. I am not getting what is the my code problem. Please can any one help me.
This is my SQL code.
-- These commands are added by applications concurrent manager
SET TERMOUT OFF
SET PAUSE OFF
SET HEADING OFF
SET FEEDBACK OFF
SET VERIFY OFF
SET ECHO OFF
WHENEVER sqlerror exit failure
-- set user environment
SET pagesize 999
SET linesize 860
SET appinfo on
SET tab off
SET newpage none
SET heading on
--SET colsep ','
-- define heading/footer
--ttitle -
-- left currdate -
-- center 'SSFT Open PO Report' -
-- right 'Page : ' format 999 sql.pno -
-- skip 1 -
-- center 'Organization US / Type Contract Labor / Status - Open' -
-- skip 2
--btitle -
-- skip 1 -
-- center 'Scansoft Inc. - All information confidential'
-- define columns
CLEAR columns
SET heading on
COLUMN c1 format a30 heading '"Last Name"' trunc
COLUMN c2 format a30 heading '"First Name"' trunc
COLUMN c3 format a50 heading '"Employee Name"' trunc
COLUMN c4 format a20 heading '"Timecard Number"' trunc
COLUMN c5 format a40 heading '"Expenditure Batch"' trunc
COLUMN c6 format a24 heading '"Weekending Date"' trunc
COLUMN c7 format a24 heading '"Expenditure Item Date"' trunc
COLUMN c8 format a20 heading '"Expendtrmonth"' trunc
COLUMN c9 format a20 heading '"Expendtryear"' trunc
COLUMN c10 format a24 heading '"Sortdate"' trunc
COLUMN c11 format 999999999 heading '"Task Id"'
COLUMN c12 format a30 heading '"Task Name"' trunc
COLUMN c13 format a30 heading '"Task Number"' trunc
COLUMN c14 format a24 heading '"Closed Date"' trunc
COLUMN c15 format a30 heading '"Project Name"' trunc
COLUMN c16 format a30 heading '"Project Number"' trunc
COLUMN c17 format a30 heading '"Project Status Code"' trunc
COLUMN c18 format a30 heading '"Expenditure Type"' trunc
COLUMN c19 format a30 heading '"Expenditure Org Name"' trunc
COLUMN c20 format 999999999 heading '"Organization Id"'
COLUMN c21 format a50 heading '"Projmrg"' trunc
COLUMN c22 format a25 heading '"Role"' trunc
COLUMN c23 format a24 heading '"Projmrg Start Date"' trunc
COLUMN c24 format a24 heading '"Projmrg Start Date"' trunc
COLUMN c25 format a35 heading '"Job Name"' trunc
COLUMN c26 format a35 heading '"Project Type"' trunc
COLUMN c27 format 999999999.99 heading '"Quentity"' trunc
-- define breaks & computes
--break -
-- on report skip 2 -
-- on c30 -
-- on c20 skip 1
--compute avg label 'Average' of c210 on report
-- select statement here
SELECT papf.last_name || '' c1, papf.first_name || '' c2,
papf.full_name || '' c3, pea.orig_user_exp_txn_reference || '' c4,
pea.expenditure_group || '' c5, pea.expenditure_ending_date || '' c6,
peia.expenditure_item_date || '' c7,
SUBSTR (TO_CHAR (peia.expenditure_item_date), 4, 3) || '' c8,
SUBSTR (TO_CHAR (peia.expenditure_item_date), 8, 2) || '' c9,
TO_DATE (SUBSTR (TO_CHAR (peia.expenditure_item_date), 4, 6),
'MM/YY'
|| '' c10,
peia.task_id || '' c11, pt.task_name || '' c12,
pt.task_number || '' c13, ppa.closed_date || '' c14, ppa.NAME || '' c15,
ppa.segment1 || '' c16, ppa.project_status_code || '' c17,
pet.expenditure_type || '' c18, haou.NAME || '' c19,
haou.organization_id || '' c20, pppv.full_name || '' c21,
pppv.ROLE || '' c22, pppv.start_date_active || '' c23,
pppv.end_date_active || '' c24, pj.NAME || '' c25,
ppa.project_type || '' c26, peia.quantity || '' c27
FROM pa.pa_expenditures_all pea,
pa.pa_expenditure_items_all peia,
pa.pa_tasks pt,
pa.pa_projects_all ppa,
hr.per_all_people_f papf,
hr.hr_all_organization_units haou,
pa.pa_expenditure_types pet,
apps.pa_project_players_v pppv,
hr.per_jobs pj
WHERE pea.expenditure_id = peia.expenditure_id
AND peia.task_id = pt.task_id
AND peia.job_id = pj.job_id
AND pt.project_id = ppa.project_id
AND pea.incurred_by_person_id = papf.person_id
AND pea.incurred_by_organization_id = haou.organization_id
AND pet.expenditure_type = peia.expenditure_type
AND ppa.project_id = pppv.project_id
AND pppv.end_date_active IS NULL
AND pea.expenditure_ending_date >= SUBSTR (SYSDATE - 545, 1, 9)
ORDER BY papf.full_name ASC,
pea.expenditure_ending_date ASC,
peia.expenditure_item_date ASC;
--spool off
Thanks in advance
--Subhas

Hi
Either remove the semicolon (;) or the slash (/) at the end of your query, as both will execute it.

Modbus Ethernet Slave seems to fail when the Master query information simultaneously for more than 16 Coils or Discrete Inputs.

I'm developing an control application by using the Modbus TCP/IP for communicating with the host computer.
I'm using the Modbus Library for LabVIEW
(http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=F1582737BACF5CA8E0340003BA7CCD71&p_node=DZ52363&p_source=External).
The LabVIEW MB Ethernet Slave seems to fail when the MB Ethernet Master
query information simultaneously for more than 16 Coils or Discrete
Inputs.
The Modbus Application Protocol Specification (http://www.Modbus-IDA.org) state that:
1- The function code 0x01 'Read Coilsis' is designed to read from 1 to 2000 contiguous status of coils in a remote device.
2- The function code 0x02 'Read Discrete Inputs' is designed to read
from 1 to 2000 contiguous status of discrete inputs in a remote device.
To test the behaviour of the LabVIEW MB Ethernet Slave I have modified
the 'MB Ethernet Example Slave.vi' by adding more Coils and Discrete
Inputs. I have added up ONLY to 20 Coils and 20 Discrete Inputs.
By using the 'MB Ethernet Example Master.vi' the answer to the MB query
is correct for the first 16 Coils or Discrete Inputs. Starting from the
17th Coil or Discrete Input the MB Ethernet Slave doesn't give any
answer.
By shifting the start point address the answer remain correct for the first 16 Coils or Discrete Inputs.
I have tested the slave by using also a third part MB Ethernet Master and the behaviour is the same.
1) There is a reason for this behaviour?
2) There is a Modbus Library for LabVIEW that satisfy the 'Modbus
Application Protocol Specification' managing from 1 to 2000 contiguous
status of Coils or Discrete Inputs?
Thanks,
Asper

I have the same problem with the MB Ethernet.
I need 40 Outputs.
The first 16 work perfectly. The next 8 coils do not work, The next 8 work, The next 16 do not work,The next 8 work,The next 24 do not work And work for the last 8. Conclusion, to activate the 40 outputs, I needed 88 coils.
Because 48 coil, do nothing Can someone help me and i cant implemet the jim solution

HT1414 C apple i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US. I m at india k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!

C Apple, i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US..after long waiting. I m from south india, living at God's country called Kerala k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!
means.. in simple words, it is trying to activate and all( searching wifi,, taking few minutes..again searching...if it couldnt find any wifi - telling .. try connect using itunes an all)...well any way. finally I try connect to a wifi network, with full speed...3mbps..from Ravi's internet cafe in downtown.
All after Im getting the below message from that white candy box!( thats all I can use now, because, in my dreams iPhone is something great, that mankind ever seen....but this really disappointed me......im simpling blinking!!(same with itunes too)
""Your iphone could not be activated because the activation server is temporarily unavailable. try connecting your iphone to itunes to activate it, or try again in a couple of minutes.
If this problem persists, contact apple support at apple.com/support""
EVERYDAY .EVERTIME.. I C this message and sleep....no use.....and i use to charge that 'white candy box' to c this message!
I try searching internet and all for solutn...but no one knw about it..but there are...some one me abt method called jailbreaking ..rednw..white snw ..ultrasnw and all...I dnt knw why it is so complicated to troublesht...apple is suppose to be simple and friendly.
C why u manufacturing these stuffz like this, if does'nt serve the any of its purpose ....or useable to any of its features atleast....C i wont be that disapppointed, if u put an option to playbck music or video during activation and all...
If you are responsible for manfacturing such unuseable thing, then its ur responsible to destroy it too.....
anyway now everyone knws that ..I have an apple iphone with me, but that doest make me proud at all...
Finally I have only few questions to ask...
1 will it work with my vodafone sim in kerala?
2 is any way , i can hear any music out frm it?
3 will i become a proud iPhone user?
I am already fedup with asking questions..begging for an solution.....
I hope so you can help to figure it out, without any complications....thank u!

It was not legitimately unlocked by the carrier it was originally locked to. ONLY the carrier it is locked to can authorize unlocking it.
In order to allow it to be used on a different carrier, the phone was hacked or jailbroken. An unauthorized modification was made to the phone. That modification has damaged the phone. You can not get support for it here or from Apple.

Change Account Duration for ISE Guest User can not more than 5 days

Extending guest account duration can not more than 5 days.
On portal we can change it to more than 5 days, but the account always expired after next 5 days.
Email notfication sent after change duration also said the account only have 5 days of duration.
I'm using ISE 1.2 patch 2.

Step 1 From the Cisco ISE Administrator interface, choose Administration > Guest Management > Settings > General > Purge.
The Purge Settings page is displayed.
Step 2 To schedule a purge operation, check the Enable purge settings for expired guest accounts check box.
Step 3 Configure the following available options:
a. Enter the purge interval, in number of days. Valid range is 1-365.
b. Specify the hour of the day when the purge should occur.
Date of last purge displays the date and time when the last purge operation occurred.
Date of next purge displays the date and time when the next purge operation is scheduled to occur.
Step 4 To immediately execute a purge of expired guest user records, click Purge Now.
This executes a purge manually even if Enable purge check box is not checked. This option provides you the freedom to purge records whenever you seem fit.
Step 5 Click Save
Please check the point 3 find the value is so that it may engaged.

More Than 250 Characters in single field

Hi
Can anybody help me Regarding this issue.
Is there any possibilty to get More than 250 Characters in single field (i.e up to 500),whether in Background or Online Mode.

Hi
do declare the field as string than Char .
data var1 type string , this can hold more 500 size .
Please mark helpful answers

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

Per Payment Document Expenses added not more than 5 lines

Hai Experts,
In outgoing payment Expenses added per document not more than 5 lines per document. Kindly provide SP_TN for this case..
Regards
Mohamed Yousuf Ali M I

Hi
Try This
if @object_type = '46' and @transaction_type in ('A','U')
   begin
        if exists(Select distinct 'Error'
        from   VPM4 T0 INNER JOIN OVPM T1 ON T0.DocNum = T1.DocEntry where T0.LineId > '5' and T1.DocEntry = @list_of_cols_val_tab_del)
          begin
   SET @error = 1234
   SET @error_message = 'Outgoing Payment lines Not More than 5 lines'
       end
end
With Regards
Balaji Sampath

How to restrict not more than 9 hrs in Timesheet

Hi
Is there any way to restrict not more than 9 hrs in Timesheet in PWA 2010
Regards
Santhu

Hi Santhu,
In server settings, timesheet settings, set the maximum hours per timesheet:
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

Standard practices:
Restart the device (power off completely, then back on) - retest.
Reset (hold sleep wake and home buttons until apple logo appears) - you can try this, but it is most useful when your device is frozen.
Restore to factory settings - retest.
Make an appointment at an Apple retail store genius bar if the above did not resolve the issue.
HTH.

Can i create more than one instance for single database?

HI
anybody can tell me how to create more than one instance for single database(without using RAC)?
thanks
Kalanidhi

Anandji,
I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
The main doubt of mine is that we create multiple instances accessing the same storage area.
Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
Why can't the same files be shared between the two instances in a same system ?
I know I am thinking a little bit confusing...
Anyway I need to test that also...
Mahesh.

Deploying more than one webapplication on single cluster

Hello Folks,
Is there a way to deploy more than one webapplication on single cluster of weblogic. Presently, we are getting an error while deploying second webapplication as
“Context path is already in use by the module: First Application Name”.
Awaiting reply, ...Thanks in Advance :)
Amit

Hi,
Yes, We can. For Instance . Your weblogic cluster consist of two managed servers. Each managed server different port number.
managedserver1: http://localhost:7003
managedserver2: http://localhost:7005
so your webapplication context name is same all managed servers.
http://localhost:7003/context,http://localhost:7005/context. you should select running weblogic cluster on jdeveloper ide when you deploying webapplication to server then the webapplication deployed all managed server.

More than one class in single java source file?

Is there a way to define more than one class in single java source file?
I get a duplicate class definition error for each extra class, but I am sure there is a way to handle this in JDeveloper.
Anyone knows how ?

Please post the question in jdeveloper forum at
JDeveloper and ADF
for quick response.
Regards,
Anupama
http://otn.oracle.com/sample_code/content.html

Query Builder accepts not more than 60 fields in a single dataset

Similar Messages

Maybe you are looking for