Query Builder doesnt load the tables. Schema not loaded

Hi all,
One small issue i am facing.. I have made a connection to Oracle db using the user id given by my DBA.
But when I try to open the query builder it doesnt load any tables.. cant see any tables.
Findings:
If on toad i run a query
select * from table it returns me noting.
But if i run it with SIEBEL
Select * from SIEBEL.table it returns result.
just prefixing it with SIEBEL gives me the result.
Do i need to ask the DBA to give my user id the access to run queries without prefixing SIEBEL... what exactly shld i ask him to do
OR is something we can do at the publisher end itself so that it strt loading required tables avalable for my user id?
thanks a lot!!
Dev

From your description I'd conclude that your DBA has provided you database access via a user ID (schema), let's say USER1. If you have registered this database as JDBC / JNDI data source using this particular user, then you will always need to prefix your table names with 'SIEBEL.' as the database objects are stored in the SIEBEL schema, and not in the USER1 schema.
You may question your DBA about the feasibility of setting up a logon trigger on the USER1 account so that it automatically switches the current schema to the SIEBEL one.
alter session set current_schema = <your_schema_name>;
Something similar was discussed in the following thread:
how to switch schema in a logon trigger when in 3-tier (how to define case)

Similar Messages

Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

Hi there,
I recently had the following situation, where I changed the source of my CSV file in Power Query.
Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
This is what I get from the Call Stack
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
Has anyone had this before and know how to fix it?
http://www.bidn.com/blogs/guavaq

Hi there
I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
Thanks
Gilbert
http://www.bidn.com/blogs/guavaq

Crystal report error (The table '' could not be found)

Dear Expert,
As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
Using the 'Crystal reports for SAP B1', they already view the report.
But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
Thanks in advance for any help.

Hi ,
We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
Best regards,
Jadie

Getting an "unable to Load the tables in the power pivot window" error

Hello,
I have 2 worksheets in a excel file and would like to load both into a power pivot table. When I click the 'create linked table' in the pwer pivot ribbon, The powerpivot window open and looks like its about to load the data but then I get
a popup dialogue box with the following error:
Unable to load the tables in the powerpivot window
============================
Error Message:
============================
The given key was not present in the dictionary.
============================
Call Stack:
============================
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at Microsoft.AnalysisServices.Modeler.SheetTabs.PopulateSheetList(String selKey)
   at Microsoft.AnalysisServices.Modeler.SheetTabs.SetSelectedSheet(String key)
   at Microsoft.AnalysisServices.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
When I try again, there is a meesage saying the table is already linked but I dont see any data.
has Anyone seen this error before and know what to do?
Thanks,
Nathan

Hi
I get first the same error as above but after I look into the details I see the following error message:
in translation the error message is: There is already a item with the same key added.
I can open the power pivot window in diagram view. And after I refresh the data in one of the tables I can open it in the table view. I have already searched for "!" signs in the calculations and searched for calculations with same name but that
is not the problem.
Also I can't open the synonym window. I think this has something to do with it because I've made changes in the synonyms.
============================
Foutbericht:
============================
Er is al een item met dezelfde sleutel toegevoegd.
============================
Aanroepstack:
============================
   bij System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
   bij Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(Tuple`2 measure, SynonymCollection synonyms)
   bij Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
   bij Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
   bij Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
   bij Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
Thanks,
Leo

XML File as Datasource - The table is not found in file

Hi,
I am trying to use a xml file as datasource and want to map those columns to the existing DWH. Actually, it is additional data which should be combined with the existing DWH data. Therefore I am using the fragmentation option.
I did it already on my privat pc and it works, but as soon as I implement it to the DEV environment it doesn' t work at all :( I am getting the following error:
Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 64002] The table is not found in file C:\Ist.xml loaded. (HY000)
Could somebody help me??
Thanks

If you changed environments make sure that the XML file actually exists in the location specified at C:\ist.xml.
Also be sure that the information in the properties section of the XML data source match your DEV environment. If you used any session variables be sure that you have also modified those in the DEV environment to reflect the DEV environment.
Did you switch from a same OS environment, i.e.: Linux to Linux or Windows to Windows? Or did you go from a Windows to Linux OS?

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED

In the Dreamweaver brim Bindings, the recordset and all of the fields of the table are not EXHIBITED. I don't know if an option of configuration adjustment exists in Dreamweaver that corrects the problem. It is Dreamweaver CS4 - Version 10.0 build 4117.

I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.

IPhone SDK - scrollToRowAtIndexPath crashes if table is not loaded yet

I have a case where i have to scroll the UITableView to a particular row and section. When i tried this the application crashes when the table is not yet done loading.
Is there a way to find out if the table view is done loading?
I did not see any delegate methods which address this.
I would appreciate for any pointers on how to handle this scenario.
Thanks,
-TRS

Found a solution.
I reload the table before i ask it to scroll to a position.
- (void) setOrdinal:(jint) topItem {
NSIndexPath *indexPath = [NSIndexPath indexPathForRow:topItem inSection:0];
[tableView reloadData];
[tableView scrollToRowAtIndexPath:indexPath atScrollPosition:UITableViewScrollPositionTop animated:NO];
The setOrdinal method is called by the user of the view containing the table.
This works just fine.
Thanks to all who took time to read this post.
-TRS

I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How to set up several iPads using same apple id for classroom? The 1st one did great and the rest will not load any apps??

iPad minis donated to a classroom. Teachers are trying to set up several iPads using the same apple id, but the apps will not load on any but the first iPad set up. What to do?

Can you assign existing devices to a DEP account? When DEP came out, you could not.
"This document offers guidance on some important considerations for getting the most out of your iOS deployment." Covers: Prepare your infrastructure. Set up devices. Configure and manage devices. Deploy apps and content. Plan for support.
https://www.apple.com/ipad/business/docs/iOS_Enterprise_Deployment_Overview_EN_F eb14.pdf
Quick overview of zero-touch MDM enrollment, DEP
http://www.apple.com/education/it/dep/
Consider DEP, Device Enrollment Program. Use VPP, Volume Purchase Program. Select an MDM, Mobile Device Management. Read the Google doc below and nsdjoey write up.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
    Education
      http://www.apple.com/education/ipad/resources/
      scroll down after all the pretty picture. Click on the words "For It".
    business site is:
       http://www.apple.com/lae/ipad/business/#browse-it-resources
      If necessary, scroll down until you see the Browse IT Resources button. Click on button.
    MDM -- Mobile Device Management
      For a comparison see this page:
      http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
    VPP -- Volume Purchase Program
      http://www.apple.com/education/it/vpp/
Joe Rowe's Excellent guides
IT managers who are new to configurator and managing a cart of ios devices:
      https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
         [ original announcement -- https://discussions.apple.com/thread/4256735?tstart=0 ]
Quick help presentation for students:
     https://docs.google.com/presentation/d/18937JdleX2gymtSb8zfbDczV-76BdR2DIfCV9eJi yOE/edit#slide=id.g1b776944_0_224

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

Firefox opens but no content is shown, url says the website but the tab does not load up and says '(untitled)'. how can i fix this?

firefox opens but no content is shown, url says the website but the tab does not load up and says 'untitle'. how can i fix this?
== This happened ==
Every time Firefox opened
== after norton asked me to restart my laptop. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; .NET4.0C)

Hi,
Unfortunately we had a data base error today and lost some user accounts when we had to go back to our backups. If you have started this thread, your's is one of those. Since we can not recreate your account, please sign-up for a new account here to reply to the forum messages:
https://support.mozilla.org/users/auth
You can use the same username and email address as before. We are very sorry for the inconvenience.

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how d

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?

You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

HT203180 I purchased a video from iTunes but it will not sync to my iPod. I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod." I tried to use the "create an iPod version" but the command is graye

I purchased a video from iTunes but it will not sync to my iPod. I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod." I tried to use the "create an iPod version" but the command is grayed out

I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2

I have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

i have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

Janieburmy,
You can always deauthorize all your machines from your store account page — just log in and view your account settings and there's a button to deauth all your machines. Which just means for the other machines, it will ask you for your store ID / password the next time you play a purchased song.
So, let's try the filter experiment.
On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
Find the heading HKEYLOCALMACHINE. Click on it.
Find the heading SYSTEM inside it. Click on it.
Find the heading CurrentControlSet. Click
Find the heading Control. Click
Find the heading Class. Click
Find the heading that begins {4D36E965- Click
Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
Delete the key named LowerFilter.
Select the key named UpperFilter, right click, select "modify". Then edit the text in the dialog to just say "GEARAspiWDM" followed by hitting the return key, the return after the word is important.
Then reboot, and see what iTunes does.
To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.
I'm particularly interested in getting rid of the "AFS2K" driver in the chain — that's a old driver from a company that hasn't existed in years.
To answer your last question, why am I doing this?... I'm paying off a karmic debt. And someday we'll start that Tequila for Toonz paypal account and then I'll be set.

Query Builder doesnt load the tables. Schema not loaded

Similar Messages

Maybe you are looking for