Query changes getting assigned to wrong bex request

We have set up several packages for bex objects by functional area (SD, HR, FI, etc.)  Once I release a particular bex request, I expect that I should not be able to make a change to a query within that functional area until I assign a new bex request for that package.  This is not the case.  As long as there is a bex request available from one of the other functional areas, any new changes to this query will be recorded in an existing bex request.  Has anyone had this problem before?
I have confirmed that all of the query elements of a particular released query are assigned to the correct package yet changes are permitted and being recorded in a request assigned to a different package.
Any help is greatly appreciated.
John

Thanks for all suggestions but if I would have just read the help I would have figured out what I was doing wrong.  1) I did not immediately create a new bex request for my functional area after releasing the last assigned request. 2) I did not create a standard bex request for all bex changes that are not assigned to a special package.
So in my scenario, because we did not create a standard bex request and I did not immediately create a new bex request for my special package, changes to my query were being written to one of the other special packages by default.

Similar Messages

  • Sap Query custom field assigned to wrong field group (in extract)

    Hello,
    I want to add an extra field to InfoSet /SAPQUERY/MEBANF at EBAN level. I added a field in a normal way:
    I fill it with a constant value. I adapted Sap Query:
    In result, I got the value in new column but only for certain rows:
    The value is there only for EBAN rows which have EBKN entries related.
    I checked the program, and my new field is added to field group %fg07 with some other fields from table EBKN (not EBAN):
    Fields from field group %fg07 are inserted to extract only in event get EBKN, so if there is no entries in EBKN, my field will not be inserted into extract:
    I tried a lot of things (assigning my field to new field group in InfoSource, adding a field on EBKN level). I can say that every extra field created by me was assigned to field group &fg07.
    Am I doing something wrong?
    The target is to add new field in the document overview panel in ME2xN transaction. I know that there is user-exit EXIT_SAPLMEQUERY_002 where I can specify a Z* query. But this solution requires a copy of InfoSet and query to Z*. Adding a new field to standard Sap query is the fastest way.
    Message was edited by: Rafal Matuszewski
    Now I tried to append EBAN table with my Z* field. I regenerated InfoSet and query but the result is still wrong:
    insert EBAN-GSFRG into %fg06.
    insert EBAN-ZUGBA into %fg06.
    insert EBKN-VBELN into %fg07.
    insert EBKN-AUFNR into %fg07.
    insert EBKN-KOSTL into %fg07.
    insert EBAN-ZZDELIV_DATE_MRP into %fg07.   <-- here again the Z* field is assigned to field group related to EBKN table

    Thanks Sandra

  • Bex request can not collect the change of query

    HI every one:
         Bex request can not collect the change of query automatically ,eventhough This query has ben transport before and have the same dev class with the Bex request.
            when I press the  button to save the change of query  , a dialog was pop up to let me assign one request to this query.
              who can help me ?! thanks alot!
    Best regard
    david

    Hi David,
    already previous request is transported to Q or P....so when ever u try to change the existing query in BI.. the assigned request is not available in 'D'. so its asking to assign a request. for this
    go to transport connection in Admin Workbench>there in right top u willl find a transport symbol for bex> click that for creating a request for bex queries--> after creating that request try to open ur query and do necessary modifications, what ever the modifications you do will come under this newly created request.
    reply back if u have any questions
    Thanks and Regards
    Ajay .D

  • How to get bex query changes reflected in webi.

    Hi expert,
             I am using sap bex query in WEBI by BICS connection, but I have done some change in bex query, how can I get those changed reflected in webi.
    Many Thanks,

    Hi Zhang,
    Please review following link which would help you to understand the impacts of changes in the BEx Query to associated universes and webi reports.
    http://wiki.scn.sap.com/wiki/display/BOBJ/Impact+of+a+BEx+query+change+to+universes+and+WebI+documents
    Regards,
    Veer

  • I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

    I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

    Also, if you are sharing an Apple ID, you will get his iMessages.

  • Wrong query is getting generated in WHERE NOT EXISTS  with group by clause

    Query is getting generated wrongly in where not exists section when i use group by function.Please prvoide me any clue to over come the problem.
    /* DETECTION_STRATEGY = NOT_EXISTS */
    INSERT /*+ APPEND */ INTO STG_ETL.I$_DCMT_TIMEZONE_LOOKUP
         TZ_OFFSET,
         ADT_CRT_DT,
         ADT_UPDT_DT,
         IND_UPDATE
    SELECT * FROM (
    SELECT      
         to_number(KOFAX.RECEIVED_TZ)     TZ_OFFSET,
         min(sysdate)     ADT_CRT_DT,
         min(sysdate)     ADT_UPDT_DT,
         'I' IND_UPDATE
    FROM     ESTG.FLAT_FIL_DMS_KOFAX KOFAX
    WHERE     (1=1)
    And (KOFAX.LD_DT = ( select MAX(LD_DT) from ESTG.FLAT_FIL_DMS_KOFAX INNER
    where INNER.ENGAGEMENT=KOFAX.ENGAGEMENT
                   and INNER.KOFAX_FILE_NM = KOFAX.KOFAX_FILE_NM
                   AND INNER.IM_CUST_ID = KOFAX.IM_CUST_ID
              and INNER.BATCH_ID=KOFAX.BATCH_ID)
    AND
    (TO_DATE(KOFAX.LD_DT)>=TO_DATE(SUBSTR('#WAREHOUSE.P_EDW_LAST_RUN',1,10),'YYYY-MM-DD'))
    And (substr(KOFAX.RECEIVED_TZ,1,1) <> '+')
    Group By to_number(KOFAX.RECEIVED_TZ)
    ) S
    WHERE NOT EXISTS (
         SELECT     'X'
         FROM     EDW.DCMT_TIMEZONE_LOOKUP T
         WHERE     T.TZ_OFFSET     = S.TZ_OFFSET AND
         )

    Easiest fix for you would be to change the detection_strategy on the IKM from NOT_EXISTS to either :
    MINUS
    -- Try this out, it should work, it will give the same data through the equiverlant steps.
    NONE
    -- This will load all incoming data into your I$ table, there will be more rows to crunch in the following 'Flag Rows for Update' step, it might give incorrect results potentially - you will have to test it.
    So try MINUS first, failing that, see if NONE gives you what you want in your target.
    Are you inserting only new data or updating existing data?

  • How To Guide : Impact of a BEx query change to universes and WebI document

    Ever wondered about the impact of a BEx query change to your universes and Intelligence documents ? "If I change this, will I need to refresh the universe structure ? will my Web Intelligence documents break ?". This article aims at clarifying these questions for Web Intelligence documents that use OLAP Universe(s) based on BEx query(ies). More specifically, it clarifies which BEx query change does impact Universes and Web Intelligence documents and which one is transparent to them.
    The first part of this article provides a summary table. The second part explains what to do to make the universe and Web Intelligence documents reflect the BEx query change. And finally, it covers each change scenario in details with more explanation and screen shots.
    [http://wiki.sdn.sap.com/wiki/x/0wt9DQ|http://wiki.sdn.sap.com/wiki/x/0wt9DQ]

    Hi Rajesh J Salecha,
    What I understood is like :
    You have two queries and both gives same results but one of the query having a parameter.
    You have one report which is using query1.  Now you want that report to be copied as Report2 and use Query2 instead of Query1.
    If the this is the issue, then you copy Report1 as Report2 and go in Database and change the Data source location to Query2.
    Hope this will help you.  If my understanding is wrong then give us the work flow.
    Thanks,
    Sastry

  • BEx query not getting reflected correctly in OLAP workspace

    Hi,
    I have an OLAP workspace based on a BEx query. Everything works fine with BEx query and We can see the BEx report as required. But in OLAP workspace for one of the feilds (profit center), the workspace is coming with the Texts but not keys. Keys says Not Assigned everytime.
    BEx
    OLAP Workspace
    1990909099/Super Center
    #/Super Center
    871812788/Athlon
    #/Athlon
    We refreshed the connection couple of times and created new reports without any better results. Can anyone suggest a solution for this.
    Thanks
    Neo

    Hi,
    Yes,We're using standart template.
    This below  URL generated froum Query Designer.
    http://<hostname>:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=KSD_M01_Q006
    regards

  • CAML query to get task assigned to current logged in user

    I want to know the CAML query to get tasks assigned to the currently logged in user
    Nour

    Hi,
    This is the query that worked for me
    <Where>
    <And>
    <Or>
    <Membership Type=’CurrentUserGroups’>
    <FieldRef Name=’AssignedTo’ />
    </Membership>
    <Eq>
    <FieldRef Name=’AssignedTo’  LookupId=’TRUE’ />
    <Value Type=’Lookup’>123</Value>
    </Eq>
    </Or>
    <Neq>
    <FieldRef Name=’Status’ />
    <Value Type=’Text’>Completed</Value>
    </Neq>
    </And>
    </Where>
    Regards,
    Nishant Rana
    http://nishantrana.wordpress.com https://twitter.com/#!/nishantranacrm

  • HOW TO CHANGE SQL QUERY TO GET SPECIFIC RESULT

    I HAVE FOLLOWING QUERY AND ITS FUNCTIONING BUT I WANT ALL THOSE RECORD SHOULD BE DISPLADE WICH HAVE NO TRANSACTION IN SALES ANS SALES RETURN WHILE RETREVING DATA FROM DATABASE.
    I TRIED TO USE + OPERATOR BUT I DON'T KNOW HOW TO CHANGE THE QUERY TO GET THE RESULT
    MAIN TABLE IS BEING USED TO FETCH RECORD
    SALES_HEADER,SALES_DETAIL
    SALES_HEADERR,SALES_DETAILR
    STOCK_REG
    AND THE QUERY IS
    select s.item_code,S.DESCR,s.GRAND_TOTAL,
    sum(decode(d.dayno,01,NVL(S.QTY,0),0)) DAY1,
    sum(decode(d.dayno,02,NVL(S.QTY,0),0)) DAY2,
    sum(decode(d.dayno,03,NVL(S.QTY,0),0)) DAY3,
    sum(decode(d.dayno,04,NVL(S.QTY,0),0)) DAY4,
    sum(decode(d.dayno,05,NVL(S.QTY,0),0)) DAY5,
    sum(decode(d.dayno,06,NVL(S.QTY,0),0)) DAY6,
    sum(decode(d.dayno,07,NVL(S.QTY,0),0)) DAY7,
    sum(decode(d.dayno,08,NVL(S.QTY,0),0)) DAY8,
    sum(decode(d.dayno,09,NVL(S.QTY,0),0)) DAY9,
    sum(decode(d.dayno,10,NVL(S.QTY,0),0)) DAY10,
    sum(decode(d.dayno,11,NVL(S.QTY,0),0)) DAY11,
    sum(decode(d.dayno,12,NVL(S.QTY,0),0)) DAY12,
    sum(decode(d.dayno,13,NVL(S.QTY,0),0)) DAY13,
    sum(decode(d.dayno,14,NVL(S.QTY,0),0)) DAY14,
    sum(decode(d.dayno,15,NVL(S.QTY,0),0)) DAY15,
    sum(decode(d.dayno,16,NVL(S.QTY,0),0)) DAY16,
    sum(decode(d.dayno,17,NVL(S.QTY,0),0)) DAY17,
    sum(decode(d.dayno,18,NVL(S.QTY,0),0)) DAY18,
    sum(decode(d.dayno,19,NVL(S.QTY,0),0)) DAY19,
    sum(decode(d.dayno,20,NVL(S.QTY,0),0)) DAY20,
    sum(decode(d.dayno,21,NVL(S.QTY,0),0)) DAY21,
    sum(decode(d.dayno,22,NVL(S.QTY,0),0)) DAY22,
    sum(decode(d.dayno,23,NVL(S.QTY,0),0)) DAY23,
    sum(decode(d.dayno,24,NVL(S.QTY,0),0)) DAY24,
    sum(decode(d.dayno,25,NVL(S.QTY,0),0)) DAY25,
    sum(decode(d.dayno,26,NVL(S.QTY,0),0)) DAY26,
    sum(decode(d.dayno,27,NVL(S.QTY,0),0)) DAY27,
    sum(decode(d.dayno,28,NVL(S.QTY,0),0)) DAY28,
    sum(decode(d.dayno,29,NVL(S.QTY,0),0)) DAY29,
    sum(decode(d.dayno,30,NVL(S.QTY,0),0)) DAY30,
    sum(decode(d.dayno,31,NVL(S.QTY,0),0)) DAY31,
    sum(S.qty) TU
    FROM
    (select nvl(sales_detail.qty+sales_detail.bonus,0) as qty,
    sales_detail.item_code AS ITEM_CODE,
    stock_reg.descr AS descr,
    s_date as sale_date,stock_reg.GRAND_TOTAL AS GRAND_TOTAL FROM
    SALES_DETAIL,SALES_HEADER,STOCK_REG
    WHERE SALES_DETAIL.S_ID = SALES_HEADER.S_ID AND
    SALES_DETAIL.ITEM_CODE = STOCK_REG.ITEM_CODE(+) AND
    STOCK_REG.COMCODE='C1'
    UNION all
    select -1*nvl(sales_detailR.qty+sales_detailR.bonus,0) as qty,
    sales_detailR.item_code AS ITEM_CODE,
    stock_reg.descr AS descr,
    RETURN_date as sale_date,stock_reg.GRAND_TOTAL AS GRAND_TOTAL FROM
    SALES_DETAILR,SALES_HEADERR,STOCK_REG
    WHERE SALES_DETAILR.SR_ID = SALES_HEADERR.SR_ID AND
    SALES_DETAILR.ITEM_CODE = STOCK_REG.ITEM_CODE(+) AND
    STOCK_REG.COMCODE='C1') S,
    (select level as dayno
    from dual
    connect by level <= 31) d
    where d.dayno = to_char(s.sALE_date, 'DD') AND TO_DATE(S.SALE_DATE) BETWEEN '&FROMDATE' AND '&TODATE'
    GROUP BY S.ITEM_CODE,S.DESCR,S.GRAND_TOTAL

    well my query running successfully just the quesion was that i wanted to bring some changes in the query to retrieve the complete record which has no transaction in sales
    for exmple
    if i write the quey
    select dept.deptno,sum(sal) from emp,dept
    where dept.deptno = emp.deptno
    group by dept.deptno
    the recult comes as
    DEPTNO SUM(SAL)
    10 8750
    20 10875
    30 9400
    though there is another deptno which is deptno no 40
    have no sal
    and when i use this query
    select dept.deptno,sum(sal) from emp,dept
    where dept.deptno = emp.deptno(+)
    group by dept.deptno
    it shows the dept no 40 also
    DEPTNO SUM(SAL)
    10 8750
    20 10875
    30 9400
    40
    so to get this i posted query which was to long to understand easily.
    i accept that i sholud post short query to make other understand
    so check out this
    select STOCK_rEG.item_code AS ITEM_CODE,SUM(qty) as qty
    FROM
    SALES_DETAILR,SALES_HEADERR,STOCK_REG
    WHERE SALES_DETAILR.SR_ID = SALES_HEADERR.SR_ID AND
    SALES_DETAILR.STOCKCODE = STOCK_REG.STOCKCODE
    AND RETURN_DATE = '01-APR-08'
    GROUP BY STOCK_rEG.item_code
    ORDER BY TO_NUMBER(ITEM_CODE) ASC
    when i execute this query i get the following result
    ITEM_CODE QTY
    84 2
    102 3
    108 3
    116 6
    166 3
    170 3
    thoug there is other items are aalso available in stock which transaction
    yet not been done or not been sold out/
    so when i use the outer join i get the same result
    select STOCK_rEG.item_code AS ITEM_CODE,SUM(qty) as qty
    FROM
    SALES_DETAILR,SALES_HEADERR,STOCK_REG
    WHERE SALES_DETAILR.SR_ID = SALES_HEADERR.SR_ID AND
    SALES_DETAILR.STOCKCODE(+) = STOCK_REG.STOCKCODE
    AND RETURN_DATE = '01-APR-08'
    GROUP BY STOCK_rEG.item_code
    ORDER BY TO_NUMBER(ITEM_CODE) ASC
    ITEM_CODE QTY
    84 2
    102 3
    108 3
    116 6
    166 3
    170 3
    hope i tried to make u understand on better way

  • Query to get all ports assigned and used by EBS instance.

    Hi,
    Can some one pleaase help to get
    Query to get all ports assigned and used by EBS instance.
    Help is appreaciated.
    Regards,
    Milan

    MILAN RATHOD wrote:
    Hi,
    Can some one pleaase help to get
    Query to get all ports assigned and used by EBS instance.
    Help is appreaciated.
    Regards,
    MilanIn addition to the thread referenced above by Helios, please check the context files and (Oracle E-Business Suite R12 Configuration in a DMZ [ID 380490.1] -- F. List of Ports to Open in a DMZ Configuration).
    Thanks,
    Hussein

  • HT204406 I signed up for iTunes Match but I keep getting a msg that my request can't be completed - Error 4010. What's wrong?

    I signed up for iTunes Match but I keep getting a msg that my request can't be completed - Error 4010. What's wrong?

    From the  More Like This  on the right
    https://discussions.apple.com/thread/3992090?tstart=0

  • How to check query is getting reused after changing parametr cursor_sharing

    Hello,
    Oracle Version: 11g
    OS Version: Windows 2003 64Bit
    How to find if a particular query is getting reused after change in a cursor_sharing parameter from EXACT to SIMILAR.
    Which set of Views/DD's should i query go get the relevant details.
    Thanks in advance.
    -Vijay.

    SQL> desc v$sqlarea
    Name                                                  Null?    Type
    SQL_TEXT                                                       VARCHAR2(1000)
    SQL_FULLTEXT                                                   CLOB
    SQL_ID                                                         VARCHAR2(13)
    SHARABLE_MEM                                                   NUMBER
    PERSISTENT_MEM                                                 NUMBER
    RUNTIME_MEM                                                    NUMBER
    SORTS                                                          NUMBER
    VERSION_COUNT                                                  NUMBER
    LOADED_VERSIONS                                                NUMBER
    OPEN_VERSIONS                                                  NUMBER
    USERS_OPENING                                                  NUMBER
    FETCHES                                                        NUMBER
    EXECUTIONS                                                     NUMBER
    PX_SERVERS_EXECUTIONS                                          NUMBER
    END_OF_FETCH_COUNT                                             NUMBER
    USERS_EXECUTING                                                NUMBER
    LOADS                                                          NUMBER
    FIRST_LOAD_TIME                                                VARCHAR2(19)
    INVALIDATIONS                                                  NUMBER
    PARSE_CALLS                                                    NUMBER
    DISK_READS                                                     NUMBER
    DIRECT_WRITES                                                  NUMBER
    BUFFER_GETS                                                    NUMBER
    APPLICATION_WAIT_TIME                                          NUMBER
    CONCURRENCY_WAIT_TIME                                          NUMBER
    CLUSTER_WAIT_TIME                                              NUMBER
    USER_IO_WAIT_TIME                                              NUMBER
    PLSQL_EXEC_TIME                                                NUMBER
    JAVA_EXEC_TIME                                                 NUMBER
    ROWS_PROCESSED                                                 NUMBER
    COMMAND_TYPE                                                   NUMBER
    OPTIMIZER_MODE                                                 VARCHAR2(10)
    OPTIMIZER_COST                                                 NUMBER
    OPTIMIZER_ENV                                                  RAW(797)
    OPTIMIZER_ENV_HASH_VALUE                                       NUMBER
    PARSING_USER_ID                                                NUMBER
    PARSING_SCHEMA_ID                                              NUMBER
    PARSING_SCHEMA_NAME                                            VARCHAR2(30)
    KEPT_VERSIONS                                                  NUMBER
    ADDRESS                                                        RAW(4)
    HASH_VALUE                                                     NUMBER
    OLD_HASH_VALUE                                                 NUMBER
    PLAN_HASH_VALUE                                                NUMBER
    MODULE                                                         VARCHAR2(64)
    MODULE_HASH                                                    NUMBER
    ACTION                                                         VARCHAR2(64)
    ACTION_HASH                                                    NUMBER
    SERIALIZABLE_ABORTS                                            NUMBER
    OUTLINE_CATEGORY                                               VARCHAR2(64)
    CPU_TIME                                                       NUMBER
    ELAPSED_TIME                                                   NUMBER
    OUTLINE_SID                                                    VARCHAR2(40)
    LAST_ACTIVE_CHILD_ADDRESS                                      RAW(4)
    REMOTE                                                         VARCHAR2(1)
    OBJECT_STATUS                                                  VARCHAR2(19)
    LITERAL_HASH_VALUE                                             NUMBER
    LAST_LOAD_TIME                                                 DATE
    IS_OBSOLETE                                                    VARCHAR2(1)
    CHILD_LATCH                                                    NUMBER
    SQL_PROFILE                                                    VARCHAR2(64)
    PROGRAM_ID                                                     NUMBER
    PROGRAM_LINE#                                                  NUMBER
    EXACT_MATCHING_SIGNATURE                                       NUMBER
    FORCE_MATCHING_SIGNATURE                                       NUMBER
    LAST_ACTIVE_TIME                                               DATE
    BIND_DATA                                                      RAW(2000)

  • Query Changes: Variable not collected in Transport

    Hi Experts,
    Intiatlly some one created a query and it was transported to BWQ from BWD.
    Due to some changes, I needed to rework on the query. For that I did the following:
    a. In the Administrator Transport Workbench, I collected the query
    b. CLicked on the Transport checkbox
    c. Then assigned a new BEX Transport request.
    d. I then made changes in the query plus added a variable in the query.
    e. I checked my query and it was working fine in BWD.
    Now when I transport this query to BWQ, the transport fails and says
    "Error when acitvating element 4DKMNO0UMEXIN0FHM6RYXXJ3F"
    "Element 4E5X3H4IQ5BEDSZY1I6GW4P2J" is missing in version M"
    I think the transport is missing the variable I created. So why is this not collected?
    Secondly since this transport request was released will I have to recollect the query and variable. If so how?
    Thanks,
    Hundia

    I raised an OSS Message.
    The reply from SAP was:
    "We have analyzed the situation with the inconsistent queries.
    1. The error message
    'Unable ot detect element type for Element Recreated Formula:
    DBJFSQOSAL3WPK8LSCNUWNAJ"' is raise as a result of incorrect repair
    procedure most likely perfomed by the program ANALYZE_MISSING_ELEMENTS.
    This is very old report which allowes repair, but unfortunately this
    repair is not correct. Therefore we do not recommend you to use it
    in similar cases.
    The element DBJFSQOSAL3WPK8LSCNUWNAJ recreated by the program as a
    local formula must have type Calculated Key Figure. This info can be
    obtained just by analysis of the corresponding structure members which
    has to represent this CKF in the query...
    2. Missing element and INCONSISTENCY. This is logically related to
    the first case. I have perfomed extended anylysis and the situation is
    the following.
    Affected query YTEMP_ZSCNNM04_01 (4B75NN07LN3TJVDW9VX8OUACR) contains
    one unresolved reference to 4B773WHW1GK5WZAPK5CZHZSH7. This missing
    element can be a local structure member (FLM or SEL) or a reusable
    object like calculated or restricted KF
    Affected query ZORQSP_ZSPNNM021_NN_05 (4DUV3IK29VBJESNEWX20PBXM3) also
    contains one unresolved reference. This is pretty similar to the case
    above. The missing element is CKF. This can be found from the definitionof the related element.
    Affected query YY_FT_TEST has 3 unresolved references. Here the case
    is a bit different. According to my analysis the missing elements are
    just such global part of a query like Filter and Sheet. This more less
    means the entire definition of this query is not available.
    Possible solution.
    As far as I see, all missing elements are local for the BWD system.
    This means that most likely we can not use transports from the other
    system. By just to use this option aswell, please check if some of thesemissing can be found in the other systems
    4B773WHW1GK5WZAPK5CZHZSH7
    4BO650QIIZZ51VCNLZXSC4MP7
    4BO652NN9NEIPI7P2IIUUMB57
    4BPGWZK405TZ1061K1FSQCT0R
    4DVE6TT3PU9YJ6RQ4ETM2MDIJ
    and
    4DBJFSQOSAL3WPK8LSCNUWNAJ
    If you find something, it is necessary to transport them to the BWD
    system. This will solve some issues.
    But probably you will not find them. Therefore the alternative way will
    be to replaces the missing objects in the definition of the affected
    queries by some other availabe objects. This is to be done manually.
    For example mising CKF can be replaced by a constant value and then
    in Query Designer replaced once again by any avaialbe CKF.
    Such technique can help te achieve technical consistency of the queries
    ZORQSP_ZSPNNM021_NN_04, YTEMP_ZSCNNM04_01 and ZORQSP_ZSPNNM021_NN_05.
    Situaiton with the YY_FT_TEST is more critical. There are no chances
    to repair this one. The only option will be to delete it using the
    transaction RSZDELETE.
    Please tell me how would you like to process. In principle, this case
    is not really critical as the missing elements are just locally affect
    queries and not used by reusable query components like CKFs/RKFs which
    might be shared between many other queries also affecting them.

  • Transport Query Changes Individually

    In our environment, we have a SOX IT requirement that each change to a query is separately approved by the business user before it is moved to production.  The transport request must be able to be directly linked to a change request management system where the approvals took place.
    We have a large team.  We use the BEx transport, and have set up several development classes to further refine the changes to queries but the problem is as follows:
    If two developers work on separate queries changes at the same time, but both queries are in the same development class, those changes will be mixed (and locked) into the same BEx request.  This makes it difficult to link one change to one request and another change to another request.  If I then require the developers to collect their changes manually to put them in separate requests, they get errors because the objects are already locked in to the default request for that development class.
    What I would like to do is to turn off the automatic recording of BEx changes so that the developers will all be forced to manually collect changes before moving.  Or even better, if they make a change, they would be prompted as per a normal change to an object.
    Has anyone encountered this problem before or have any suggestions as to how to resolve?

    Hi,
    You have to make sure that all the elements of the queries are captured in the transport request. For that, in transport connection, while capturing the query, filter on "ELEM" and include them in transport connection.
    As for authorization, you will not have it except in development. Thatu2019s the reason why you can not change the query in GRA directly. You always have to transport the changes.
    Regards,
    Yogesh

Maybe you are looking for