Query: Deactivate condition type

Dear All,
I have a question.
Iam using condition type HM00 and entering net value manually.
Now, as expected, when I see the pricing screen, PR00 is deactivated.
How does the system know that it should deactivate PR00 when HM00 is entered.
Thank you

Hi nsp nsp
Once you enter the HM00 condition type manually in the sales order , PR00 condition type gets deactivated because
Because you have put a requirement 2 for PR00 condition type and when you create a sales order system will check weather that requirement is met or not . If it is met then PR00 condition record value will trigger in the sales order which is nothing but automatic pricing.
Now when you enter the HM00 condition type manually in the sales order this PR00 condition type will become inactive as the manually entered price becomes active . Because that price which you have entered manually in the sales order is not meeting the requirement for the PR00 condition type.
More over another reason why it becomes inactive is because of the following in HM00 condition type details
condition class: B, group condition: X, header condition: X
Regards
Srinath

Similar Messages

Query regarding condition type value calculation in VA05

Dear Gurus,
We had maintained one condition type Z*** where we had declared the condition type as follows:
Condition class - Prices
Calculation type - Quantity
Plus/Minus - A (positive).
We had maintained the condition table as :
Price = 200 USD per 10 EA
Lower limit = uppler limit = 0.
When we are calculating the price in the sales document, the system is taking the price of 10 units as 200 USD correctly.
But in VA05 screen, the confirmed net value for 10 units is shown as 10*200 = 2000 USD which is wrong.
Can anybody throw a light on how the confirmed net value for VA05 screen is calculated.
regards,
Krishna

If it is representing the value of the condition type, then it is a new field customised by your technical team. Standard VA05 doesnot represent the value of any condition type. So please check with your developer, may be there is a problem in their program.

Condition Type for Purchase order

Dear All,
I have one query about condition type at item detail level in purchase order.
Please let me know how to disable any condition type for purchase order.
I have already tried it in, SPRO->Materials Management->Purchasing->Purchase Order->Define Screen Layout at Document Level.
But not found it there.
Regards,
Mahesh Wagh

Dear Ganti,
>OMF4 - Materials Management >Purchasing > Purchase Order Processing >Define screen layout at document level
1. No such T Code OMF4 found (I ma using ECC 6.0)
2. NO Such Customizing Menu path sound in SPRO.
Pls elaborate......
Regards,
Mahesh Wagh

Standard Report with Condition Type and Condition Records

Hello to all,
Is there any standard report available in which Condition Type and Condition values are displayed in either column or row format? The selection criteria can be either Quotation, Contract, Sales Order, Delivery, Invoice or Billing. Thanks anyways...

Hi Huzefa,
Pls check the relevant table where the condition records are stored. then do a query with that condition table and KONP. say for eg: condn type ZINV,ZMRP gets stored in condition table A821, then combine A821 and KONP, u can input condition type and get the values........................
go to vk13, display and click on layout, u will able to see the condition table.
Rgds,
Anitha J

How to query the condition value in VPRS

Hello all,
we provide the sales price to customers based on the condition value in "VPRS" ,because I have thousands of goods need the price,so I 'd like to make a query to extract the condition value in "VPRS".
which table is refer to this?
https://mnlylq.bay.livefilestore.com/y1mXNdIiY7VgiU1v3ymS71pxZluGxj4YNp4IFsyQEr1zkoxjm1VCsxpOgbBQ1-ucxiRtA9tC7O_3ZPaQa7qWKGbdnHNX8UzazWTlettENIO7iujggSx7vHjc2bvuIqhYFYb2DEgIjuNaJ5foKU_xF7wvA/%E5%9B%BE%E5%85%AD.jpg?psid
Thanks,
helai

hi,
For your Item category, if you check DETERMINE COST
Determine cost
Indicates whether, during pricing, the system determines the cost (stock value) of a sales document item.
Use
The system checks the cost determination indicator as a requirement before applying the condition type that calculates the cost (condition type VPRS in the standard version of R/3 1.1)
Mainatin VPRS as D then it will automatically pull the price from Material master if maintained
IF VPRS is getting determined, then in your pricing procedure, you can add markup (multiplier)

How to find out the condition type of the tax code in the PO document

Hi friends,
My questions is how to find out the condition type of the tax code in the PO document.
When you use me23n to display one PO document. In the invoice tab, there is one text field named 'tax code' whose value could be T1, T2, J1, J2 and so on. Beside the text field, there is one button named taxes. When you click the button taxes, it will show you the condition type of the tax code. For example, if the tax code is 'T1', then its condition type 'mwcn'.
I want to use the information on the PO to find out the value 'mwcn' of the tax code 'T1'. Could anybody help to describe the logic?it looks like the value is saved in the table konp. But I don't know the logic. Please describe. Thank you.

Hi,
Hope you have asked for select query..
select single knumh from a003 into wa_knumh
where mwskz = wa_itpotab-mwskz
and kappl = 'TX'
and aland = 'IN'.
select single kbetr from konp into wa_kbetr
where knumh = wa_knumh.
cheers,
Dep

Condition type

Hi Experts,
In Marketing Planner - while creating a contract, agreements gets generated.
Here the issue : we are getting Condition types counter id rather its description.
*In detail :* I have created a contract with 3 entries in PCUI where its agreements gets generated once the status is approved stage.
For a particular agreement, i am getting a condition type counter id as 042 instead of getting the description (Rebate Rate / lb).
somehow its not getting its value whereas the other agreements get generates and able to see the description.
this is happening only for this particular entry.
Can anyone please provide the solution. I am using CRM 5.0.
thanks in advance,
Jo

Ben,
When using Condition Type Value of Item in Expression 1 = Zero, the value you'd enter into the Expression 1 field is the name of a page or application item, e.g., P1_EMPNO.
When using Condition Type PL/SQL Expression, you enter a PL/SQL expression into the Expression 1 field, examples:
true
false
:APP_USER = 'BENTON'
To use the result of a boolean function, use Condition Type PL/SQL Function Returning Boolean and in the Expression 1 field put, for example:
return func(77);
For your specific example, an EXISTS or NOT EXISTS condition might be best. For those you put the query into the Expression 1 field.
Scott

Condition Types in Scheduling Agreement(Urgent)

Dear Experts.
This is a query with reference to my earlier issue Changes in Condition ME32L.As per suggestions, to get validity periods i have clicked on Time dependent Condition In SPRO settings Under Define document Types.
After that i am not able to enter Custom Conditions while creating a Scheduling Agreement.So i tried by removing this Time dependent setting,then was able to enter Custom Conditions...
But i need to see validity periods too when i change condition types through ME32L...
So,Please give me appropriate Suggestion....
Thanks and Regards
MK

I'm not sure about your own pric proc, but in standard it should works, and also its apply per organization level.
RM0000 and RM1000
    Control the price determination process in POs, quotations, and
    scheduling agreements.
    Both calculation schemas require 2 condition types for the gross
    price: one for automatic price determination (standard: PB00) and
    one for manual maintenance (standard: PBXX).
RM0001 and RM1001
    Determine which condition types you can enter in purchasing document
    headers with time-dependent conditions (e.g. contracts).

Free Goods Condition type R100

Hi Pals,
As per standard SAP, the free goods condition type R100 has to contain 'Requirement' 55 and 'Condition base value' 28, But it doesn't reflect in Proforma Billing document, as routine No. 28 will no get calculated in F8 Proforma invoice.
So my query is, is there any other standard routine which i can use, insted of 28.
Thanking you in anticipation,
Regards
Bidhu Bhusan Samantaray
9820917582

1. What is the condition type to calculate Taxes in India?
JEXP     IN: A/R BED %
JEXQ     IN A/R BED
JEAP     IN A/R AED %
JEAQ     IN A/R AED Qty
JESP     IN A/R SED %
JESQ     IN A/R SED Qty
JASS     IN A/R Assessable Va
JIN1     IN A/R CST
JIN2     IN A/R LST
JLST     IN A/R LST
JMAN     IN Manual excise
JMOD     IN A/R BED ..............................
Regards,
Rajesh Banka
Reward points if helpful.

New condition type print preview time out.

Dear all,
I am a ABAPer.
I am facing one problem in PO Print preview.
My MM consultant defines one new condition type-ZPF5 .
Instead of ZPF2 we are using this condition type- ZPF5.
After that in PO ,Net value & everything coming fine.
There is a smartform also related to this.
I have added all logic related to ZPF5 .
But when going to print preview In production & clicking on print preview,
It is giving time out after 9-10 mint-Time out for ALL po,not only for this condition related .
v_no = &SFSY-JOBPAGES& -1. "in this line.
&SFSY-JOBPAGES& means " Total number of pages in the currently formatted print request.
I saw M/08 - ZPF5 Print equal to 'X ' & Statistics is ticked for this.
But when I revert back old SMART FORMS & PRINT = blank,print preview is coming fine for all PO except
ZPF5 Is not affecting in print preview,but in PO affecting.
Any help from MM side?
Thanks
Gourav.

Dear all,
Issue resolved.
I have changed my select query & remove old condition from that,now I am using only ZPF5.
Like :
SELECT SINGLE KBETR KWERT KRECH FROM KONV INTO (V1_KBE,V_PF,V_KREC)
         WHERE KNUMV EQ V_KNUM AND
               KPOSN EQ WA_MAT-EBELP AND
               KSCHL EQ 'ZPF5'. " not zpf2
Thanks all for your time.
Thanks
Kumar Gourav.

Condition type need to be deactivated due to free good

Dear Gurus,
Is it possible in standard sap to deactivate a certain condition type if its a free good(item category :TANN) but work normally for other items of the order.As the pricing procedure must remain same.
Regards,
Sam Ahmed

Hi Sam Ahmed,
We can control this by maintaining the validity periods of the condition type,if the validity period of the condition type was over
it will be deactivated automatically,until you extended the validity.Everything will function normally no pricing procedure changes
is required.
Ex: PR00
valid from 29.10.2011 valid to 29.11.2011
after 29.11.2011 the condition record automatically deactivated.
check and revert
regards
Ram

Condition Type PR00 on materials and the price

Hi,
When I try to create a Sales Order by using VA01, in the item level, I am inputting the material number, quantity and profit center. Then when I select the same line and click on item conditions, automatically, condition type PR00 and the and amount is getting defaulted. However, for certain other materials when I click on item conditions, no condition type PR00 is being picked up. I need to manually input PR00 and the amount.
My question, I would like to know if there is any report available which shows, which materials are automatically defaulted with PR00 and what is the price automatically defaulted. I would also like to know, which are the materials are not automatically defaulted with PR00. (the cases where required to enter manually).
I am looking for any report or query etc.
Thanks in advance.

Adding to Shiva's comments...
The value for PR00 will be determined in the order only if the system could find a valid condition record exisitng. I guess, the condition type PR00 has been configured as...with value 'B - Automatic entry has priority' for the field Manual Entries. You can check the same using Tcode V/06. You are entering the values in the sales order item level for PR00 if the system fails to find a valid condition record. As Shiva mentioned, you can check the existing Condition records using the transaction V/LD for the report '15-Material Price'.
Thanks,
Ravi

Problem with multiple condition type for VAT &CST

Hi,Gurus,
pl. suggest the procedure for the following problem.we configured seperate pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
now I am facing the following problems.
1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of ZVAT/ZCST.
Now I would like to know is there any procedure to assign the Material type and Customer Account group to Tax category.
Thanks & Regards
sam

Hello Sam,
The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields Taxclassification3-Customer and taxclassification3- material. For ZSCT
Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
Please add New Condition table in the access sequence with the required Field
And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
In Document the values will be flown correctly after changing this.
Hope I have Solved your Query.
If any Doubt please revert.
Regards,
Rohit Dongre

Condition types from Central Contract not copied into Purchase Order

Hi,
When creating a central contract from SRM to ECC, all the condition types are copied well.
But when creating a shopping cart from SRM or a PO in ECC referencing the created central contract, the condtion types are not displayed in the conditions tab. (Only Condtion type PB00 is displayed.).
What can I do to assure, that all the condition types from the contract are displayed in the PO.
Do I have to do some customizing, or is there a SAP Notes to resolve this.
Regards,
Alexander

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Alternate UOM for condition type

Dear All,
My client requirement is to give the different unit for the charges(Cutting charge, machining charges) applicable on the material which is being ordered in the PO.
For example :
In a PO of the steel plate (order unit is in EA), vendor takes the cutting charges on the basis of UOM "squre inch".
and for machining charges on that steel plate , it takes on the basis of UOM " number of hours" of machine worked on that particular plate.
so for the above 2 charges I have created 2-2 different condition types , with the Calculation type of "B"-Fixed amount and "C"- qty based in each case.
and I am unable to give the condition values as per the client requirement .
I thought of taking use of Altr condition value routine in the pricing procudure , but unable to think a logic.
Please help!!!
Thanks & Regards
NC

In the PO condition, you can put different price per unit of measure for different condition type. This UOM can be different than Base unit of measure. However you have to put conversion between the two UOM in material master Basic Data 1 field.
Pl try this & revert back, if any further query.
Regards
Bhavesh

Query: Deactivate condition type

Similar Messages

Maybe you are looking for