Query Designer: Execution Fails

Hi Experts,
Iam not able to execute my query in BExWeb.
It is showing following error.
iView : N/A
Component name : N/A
Access denied
(Object:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex).
Exception id: 02:47_19/04/06_0014_909224450
See the details for the exception ID in the log file
I have found so many are facing same problem.
so i think its my time.
some one please get me out of it.
Thanks in advance
kalyan
Message was edited by: kalyan chandra
Message was edited by: kalyan chandra
Message was edited by: kalyan chandra
Message was edited by: kalyan chandra

Would defo go, SPS8, BEX 801 with hotpacks oss note 964495.
We have no issues with the portal.
Cheers,
Sarah

Similar Messages

Query Designer, Execute fails with missing iView (Portal Runtime Error)

Hi,
I have followed all steps to integrate Sap NetWeaver 2004s BI into EP. Checks done so far indicate that all is well between the EP and BI. From within the EP, I can execute the Bex Web Analyser iView and from there I can execute a query on the BI backend. From the BI backend, executing the function module RSWR_RFC_SERVICE_TEST returns the 'BI test service' success message. SSO is working fine as no user/passwords were prompted for. From the trace file, I can see no errors appear but I do see authentication success messages. So far, so good
But, when I execute a query from within the Query Designer, it calls the browser and then errors with the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 10:06_03/03/06_0012_26285450
See the details for the exception ID in the log file
Looking at the trace file, all it tells me is the same, that this iView is not found.
If I logon to the portal and have a look at the iViews within the 'platform-add-ons/bi' folder, I can see the following 4 iViews:
BEx Broadcaster (com.sap.ip.bi.bexbroadcaster)
BEx Portfolio (com.sap.ip.bi.bexportfolio)
BEx Web Analyser (com.sap.ip.bi.bexwebanalyzer)
My Portfolio (com.sap.ip.bi.myportfolio)
I cannot find the missing iView (com.sap.ip.bi.bex).
Any ideas/suggestions would be appreciated.
Thanks in advance.

Hi Ashish,
Thanks for the suggestions. Here is what happened:
1. I have run the deploy and change template again (BIPostInstall). Step 10 failed but I am not too concerned as it does appear that SSO is working both directions. Also, step 13 failed which is the 'Configure Repository Manager'. The error I got here was USER_AUTH_FAILED: User account for logonid "" not found. I am not sure where it is getting the blank userid from.
2. The 'com.sap.ip.bi.business_explorer_showcase' role suggestion looked very promising. I found some doco on it and it does mention this role and when assigned, then you see the Business Explorer tab. I assigned it to all users and to all groups. When I went back into the portal, sure enough, the Business Explorer tab was visible. From within there, I could run query which all worked fine.
BUT, when executing a query from within the BEx Query Designer, I still got the same error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:25_05/03/06_0003_26285450
See the details for the exception ID in the log file
Do you know if this is an actual iView that should exist in the portal content ? If you have this working, can you see this iView in the portal?
3. I had a look at this note (872043) but I could not get the sap download manager to work to get the zip files attached to the note download. If you have it still, could you email it to me ([email protected]) and I will try that. Did you apply the zip file?
I can't find any further trace information on why this missing iView error is happening. I've amended the severity level on the areas which a SAP note detailed but the only information I get is that a missing iView was called.
Function module RSWR_RFC_SERVICE_TEST still works fine and I can execute a query from the Web BEx Analyser iView.
I just can't execute a query from the BEx query designer due to the missing iView.
I don't know whether it is a communication problem even though SSO both directions seem to work OR whether I do have some content missing from my portal.
Regards

BEx Query designer : Execution and portal

Hi Experts,
When i execute the query the respective portal is not opening up. Kindly advise me If I am missing some setting.
thanks & regards,
M.S

Hi Michael,
The SAP Notes you are provided are very good. We are getting the URL link but I can not see the results in Internet explorer.
I am getting error the SAP Server can not be reached.
All though all settings are maintained in system, maintained server parameters in Sytstem32/hosts file, added the URL as trusted site & I am on IE 6. But nothing is working I can not see the results even the URL is generating. This is only problem with Development system, we are getting results for quality and prod system.
Please let me know if you have any idea.
Thanks!
Harshal

SSRS Error : Query execution failed for dataset 'dataSet'. (rsErrorExecutingCommand) Semantic query execution failed. Invalid object name 'RPT.*********'. (rsSemanticQueryEngineError)

I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution       failed for dataset 'dataSet'.
      (rsErrorExecutingCommand
Semantic query        execution failed. Invalid object name
       'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.

Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Terminate:Activity failed; there is no back end error log. - Query Designer

Hello all,
Has anyone encountered this erro before while using query Designer. I am trying to drag an infoobject in the rows section and I get this STOP error in message section at the bottom.
Terminate: Activity failed; there is no back-end error log [A006(R9E)]
Diagnosis
An error occurred in the back end.
System Response
An error occurred in the back end for which there is no error message. You cannot continue to work.
Procedure
Exit the Query Designer and correct the error on the back end.
Then start the query designer again.
Procedure for System Administration
I dont get what is going wrong here,
Thanks,

hi,
There may be some problems with the connectivity in the box which you have logged in or in the excel properties itself. Try to login again and see if the problem is resolved else contact the BASIS or admin.
Thanks,
vrrp.

An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
Praveen

Hello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan

An error has occurred during report processing. (rsProcessingAborted).. Query execution failed for data set

Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.

in my case the problem is
one virtual machine is for developers
other for testers
in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
the error what testers get is
Error during the local report processing.
Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
and the solution is to use alternative url or in some cases http://localhost/

An error has occurred during report processing. (rsProcessingAborted) Query execution failed for dataset 'dsPriority'. (rsErrorExecutingCommand)

click report error:
log file:
processing!ReportServer_0-2!104c!04/27/2015-19:15:21:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing.
---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'dsPriority'.
---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Query (26, 25) The ALLMEMBERS function expects a hierarchy expression for the argument. A member expression was used.
   at Microsoft.AnalysisServices.AdomdClient.AdomdDataReader..ctor(XmlReader xmlReader, CommandBehavior commandBehavior, AdomdConnection connection)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.Process()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeParameterDataSet.Process()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.ProcessConcurrent(Object threadSet)
   --- End of inner exception stack trace ---
open http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx?op=ProcessWarehouse click Invoke:
System.Web.Services.Protocols.SoapException: TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. : 2015-04-27T19:30:29:782 ---> System.InvalidOperationException:
TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. at Microsoft.TeamFoundation.Warehouse.WarehouseAdmin.QueueJobs(String collectionName, String jobName)
at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName, String jobName) --- End of inner exception stack trace --- at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName,
String jobName)

Hi shelman,
I'd like to know whether you configured TFS reporting service properly, and if you can get the report normally before. From the error message, you might has wrong data source or the parameters of the dataset 'dsPriority'. You can check whether the data source
for your report is available, try to use windows authentication. Or check the parameters of dataset 'dsPriority' make sure the query works when you execute it manually.
To process the TFS data warehouse and analysis services cube, I'd like to know which operation you selected before clicking Invoke button. Please follow the instructions on this
page to process TFS data warehouse and analysis service cube manually. You can also refer the James's last reply in this
thread or this
blog to check if the solutions work for you.
Another option is run TFS best practice analyzer to check if there any configure issues on your TFS server machine. And check event logs to see if there any useful information, elaborate more details about your scenario including reproduce steps if the problem
persists.
Best regards,

Query execution failed for data set

Hi,
We are using SQL 2005 server for generating reports.When we ran the reports it taking so much time after some time it shows this error:---
ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set ---> System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.
Can you help me out.
Thanks,
--Amit

My team is also facing similar problem. The RS trace logs report:
w3wp!processing!13!9/26/2007-15:31:23:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set 'msdb'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set 'msdb'. ---> System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.
Operation cancelled by user.
In our system, Report Server and Database are on different machines. Report Server access database using a service account who has stored proc execute permissions on database.
Problem comes only if the query execution time exceeds 5 mins. Otherwise the report gets generated successfully.
I suspected this to be some timeout issue. But I have checked that all timeout settings in rs config files are as default.
Any pointers?
Thanks
puns
[email protected]

Query execution failed for dataset

I have a problem in SSRS with MDX.
Problem Statement: Query execution failed for dataset 'ds_ex' on Production server.
Not able to reproduce this error in Dev machine.
Problem
Desc:
When I select few values from drop down list it is throwing this error. and for combinations it is working.
Thought of data issue, checked in cube, local RDL everything is fine.

Hi Vamshi,
According to the information, it's hard to determine the root case for this issue. So, please help to collect more log information while the issue happened. Please refer to the article below:
Reporting Services Execution and Trace Logging:
http://technet.microsoft.com/en-us/library/ms157403.aspx
In additon, I would suggest you to check the "Report Execution Timeout" in the article below:
Processing Options Properties Page (Report Manager):
http://technet.microsoft.com/en-us/library/ms178821.aspx
Troubleshooting Timeout errors in Reporting Services:
http://blogs.msdn.com/b/mariae/archive/2009/09/24/troubleshooting-timeout-errors-in-reporting-services.aspx
Regards,
Elvis Long
TechNet Community Support

BEX - Query Designer - Query Execution - IE "The page cannot be displayed'

Hi ALL,
Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
However, when IE pops up to show the result, it says 'The page cannot be displayed'.
It seems the PORT Number is wrong.
When I execute the RSPLAN the port number is 52300 (23 ASCS) (and it works!!).
For this web query the port in URL is 55300 (53 SCS).
Could you help to configure the right port?
Something needs to be done on Basis side configurations?
Thank you,
Nivia

Hi,
This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
But I still have problem:
The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
Connect_PM TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
ERROR partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
The important detail is that The PORTAL works if it doesn't come from BEx.
COULD SOMEONE HELP ME?
Tks,
Nivia

Error in execution of query's from Query Designer

Hi,
We have recently installed the BI 7 server, when i execute the query from query designer i got the following URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=TEST_REP&VARIABLE_SCREEN=X&DUMMY=2
due to that page is not displayed, i guess there is some sort of hostname setting need to be done.
Can anybody please guide me where all these settings are done, help required urgently ?
Thanks in advance

In fact the query's are not running because this entry needs to be maintained in the below path:
C:\WINDOWS\system32\drivers\etc\hosts
Maintain this as the last entry below the localhost
<bi server ip> <host name>.
This entry is to be maintained whenever we dont see the host name in the url.

Error in query execution from Query designer

Hi,
We have recently installed the BI 7 server, when i execute the query from query designer i got the following URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=TEST_REP&VARIABLE_SCREEN=X&DUMMY=2
due to that page is not displayed, i guess there is some sort of hostname setting need to be done.
Can anybody please guide me where all these settings are done, help required urgently ?
Thanks in advance

Hello Dipika
May be you have not included host string in logon pad.
1. Open SAP log on pad
2. Select the system and go to change mode
3. you have IP defined for the system, here you need to put host string name which u can get from C:\WINDOWS\system32\drivers\etc file for your SAP system in your system.
4. Save and exit.and run query again
Thanks
Tripple k

Execution of BEx Query Designer Querys in BI Java SDK

Hello experts,
i am actually occupying with the possibilities of the BI Java SDK. I checked the documentation but could not find an answer to my question, so i address this issue now to the community in the hope, that someone out there can give me a hint:
Is it possible to execute a BI query, which was designed in the BEx query designer, within the BI Java SDK OLAP query api?
Is there somewhere a method, which could be simply passed the technical names of the infocube and the query and then returns the query result as a IBIResultSet or IBIDataSet?
Thanks in advance for your help,
best regards,
Thilo

Hello Mohan,
thanks for this impression - thats a way i didn't think about at all before. I even think, that it is not necessary to publish the query as iview - it would suffice to invoke the BEx-AdHoc-Analysis Service via a HttpConnection-Object within a servlet and then parse the result delivered by the BEx service. You won't even need BI Java SDK for this, since this is plain Java functionality.
But as i see there seems to exist no BI Java SDK-"generic" possibility to invoke an existing query as i see....
If anybody has got another idea, it is very welcome. But i think i will investigate on the approach with the native HTTP call to AdHoc Service.
Thanks anyway & best regards,
Thilo

Calculate no of execution month in query design

Hi,
I received requirements to create sales report as users would like to execute the sales report by entering the range of calendar month (eg: from 10.2010 to 12.2010). They would like to have average sales figures to be calculated as total sales / no of month (which is 3) that based on no of month that user had entered.
Can experts please share with me how can I achieve to calculate the no of month in query designer?
Thanks and regards,
Kang Ring

Hi,
Please follow the below steps it will give you desired result.
Make a new formula in that put value 1 and exception aggregation as counter of all detailed values and refernce characterstic as calmonth so it will give you 1 against all the months you entered in the selection screen.Suppose you enter for a range of 3 months so you will get count 111 and in result you will get 3.
Now you want your sales to be divided by the sum of months count.
In order to achieve that create another fornula and put
SUMGT(formula1) formula 1 is the first formula you created.
After doing this you will get 3 against all your month.
Now create another formula and in that put your sales keyfigure and divide by formula 2.
After performing all the above steps you will get your desired result.
Hide formula 1 and formula 2.
Hope it works and fullfil your requirement.
Regards,
AL

Query Designer: Execution Fails

Similar Messages

Maybe you are looking for