Query directly from Lookup [QualifiedFlat] multivalued table

Hi,
Can i directly query from Lookup [QualifiedFlat] multivalued table without using the main table to traverse to the Lookup [QualifiedFlat] multivalued table?
to put it simple:
select * from table1;
here table1 is a Lookup [QualifiedFlat] multivalued table
Thanks,
gayatri

Gayatri,
If you query a qualified table you can only get the possible values of the non qualifier field, not all qualified table records in MDM. To get the actual data from the qualified table you have to go through a main table record.
-Greg

Similar Messages

Querying data from the maintenance view.

Hi Experts,
Well, i need the STEXT field value from the maintanance view V_T591A created for the standard table T591A.
Table T591A has the field Subtype but doesn't have the field Stext, which consists the description of the subtype. The Stext field is there in the maintenance view V_T591A.
So, if i want to query the respective description of the specific subtype, how do i get the values from the maintenance view?
Please advice.
Thanks in anticipation to all!
Cheers,
Sundar.

Atish,
It is not possible that way! U cannot Query directly from MV as a DB table.
Anyways, i managed to find the answer.
Thanks though.
Regards,
Sundar.

In SRM How to upload data from Excel to Internal Table

Hello Experts,
As seen the Function Module 'ALSM_EXCEL_TO_INTERNAL_TABLE' does not exists in SRM.
Is there any alternative to upload the data direct from excel to Internal table using any other FM. As seach did't get any relevant FM.
Please advice..
Thanks..

did u try this
TEXT_CONVERT_XLS_TO_SAP
in this manner
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header              = 'X'
      i_tab_raw_data             = lt_raw
      i_filename                 = p_path
    TABLES
      i_tab_converted_data       = gt_output
    EXCEPTIONS
      conversion_failed          = 1
      OTHERS                     = 2.
this FM works on DOI
so
SAP document about DOI:
http://help.sap.com/saphelp_nw2004s/helpdata/EN/e9/0be775408e11d1893b0000e8323c4f/frameset.htm
SAP Demo Program about DOI: SAPRDEMOEXCELINTEGRATION.
the fm you mentioned works on OLE
so you could refer,
SAP document about OLE:
http://help.sap.com/saphelp_46c/helpdata/EN/59/ae3c98488f11d189490000e829fbbd/frameset.htm
Also you can refer this post
Download of SRM Contracts in Excel - Unit of Measurement Missing
Let me know if this works ..
Regards
Manthan.
Edited by: Manthan_R on Feb 23, 2010 12:18 PM

SELECT * cannot be used in an INSERT INTO query when the source or destination table contains a multivalued field

Hi,
I am using Access 2013 and I have the following VBA code,
strSQL = "INSERT INTO Master SELECT * from Master WHERE ID = 1"
DoCmd.RunSQL (strSQL)
when the SQL statement is run, I got this error.
SELECT * cannot be used in an INSERT INTO query when the source or destination table contains a multivalued field
Any suggestion on how to get around this?
Please advice and your help would be greatly appreciated!

Rather than modelling the many-to-many relationship type by means of a multi-valued field, do so by the conventional means of modelling the relationship type by a table which resolves it into two one-to-many relationship types. You give no indication
of what is being modelled here, so let's assume a generic model where there is a many-to-many relationship type between Masters and Slaves, for which you'd have the following tables:
Masters
....MasterID (PK)
....Master
Slaves
....SlaveID (PK)
....Slave
and to model the relationship type:
SlaveMastership
....SlaveID (FK)
....MasterID (FK)
The primary key of the last is a composite one of the two foreign keys SlaveID and MasterID.
You appear to be trying to insert duplicates of a subset of rows from the same table. With the above structure, to do this you would firstly have to insert rows into the referenced table Masters for all columns bar the key, which, presuming this to be
an autonumber column, would be assigned new values automatically. To map these new rows to the same rows in Slaves as the original subset you would then need to insert rows into SlaveMastership with the same SlaveID values as those in Slaves referenced
by those rows in Slavemastership which referenced the keys of the original subset of rows from Masters, and the MasterID values of the rows inserted in the first insert operation. This would require joins to be made between the original and the new subsets
of rows in two instances of Masters on other columns which constitute a candidate key of Masters, so that the rows from SlaveMastership can be identified.
You'll find examples of these sort of insert operations in DecomposerDemo.zip in my public databases folder at:
https://onedrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
If you have difficulty opening the link copy its text (NB, not the link location) and paste it into your browser's address bar.
In this little demo file non-normalized data from Excel is decomposed into a set of normalized tables. Unlike your situation this does not involve duplication of rows into the same table, but the methodology for the insertion of rows into a table which
models a many-to-many relationship type is broadly the same.
The fact that you have this requirement to duplicate a subset of rows into the same table, however, does make me wonder about the validity of the underlying logical model. I think it would help us if you could describe in detail just what in real world
terms is being modelled by this table, and the purpose of the insert operation which you are attempting.
Ken Sheridan, Stafford, England

Syndicating Key mapping value from lookup table

Hi Experts,
I want to Syndicating Remote Key value from lookup table as per the remote system.
In syndicator, if I map destination field to the remote key of the lookup table, I am getting blank value.

Hi Mrinmoy,
kindly check in the Data Manger whether have you maintained Remote keys for the lookup table. If yes then choose the specified remote system from Remote key override fields under Map properties in the syndicator.
Incase you cant find the remote system in the "remote key override" field for which remote key is assigned in Data manager, then you need to check the Type (outbound) of the remote system in Console admin node. Because only those Remote systems type set as Outbound can been found in Remote key Override in the syndicator.
After choosing the remote key you need to map the destination field with Remote key value as shown in the below image.
Regards
Rahul

Migrating data from LookUp Table to Main Table without taking extract

Dear Experts,
Is there any way if we want to migrate full data from LookUp Table to Main Table in the same repository without taking the extract from MDM DM and not importing it using Import Manager?
Thanks
Gaurav Kumar Sharma

Hi Gaurav,
Yes there are ways,like you can create port for syndication and use MDIS to import it back but Extraction from DM would be more convenient though.You can also use APIs to syndicate the lookup data and import it back in MDM.
Can you please detail what you want to achieve?
Thanks,
Ravi

Sql query, from xml to nested table

Hello!
I have DB table: my_table
It has 2 fields: file_id and file_data (it's clob with xml)
I need to write query that returns info from xml using nested table (Oracle v.9)
The number of rows witch will return query must be equal to number of files (file_id)
Structure of XML:
<?xml version = "1.0" encoding = "utf-8"?>
<head>
<AAA v1="a" v2="b">
<BBB p1="1" p2="2"/>
<BBB p1="3" p2="4"/>
</AAA>
<AAA v1="c" v2="d">
<BBB p1="5" p2="6"/>
<BBB p1="7" p2="8"/>
<BBB p1="9" p2="0"/>
</AAA>
</head>
I have query, witch works! but not optimally! each CLOB scaned 3 times - I want to scan it once!
SELECT an.file_id,
CAST(MULTISET(SELECT extract(VALUE(val2),'//@v1').getStringVal() v1,
extract(VALUE(val2),'//@v2').getStringVal() v2,
CAST(MULTISET(SELECT extract(VALUE(val3),'//@p1').getStringVal() p1,
extract(VALUE(val3),'//@p2').getStringVal() p2,
FROM TABLE (XMLSEQUENCE(XMLTYPE(an.file_data).EXTRACT('/head/AAA/BBB[../@v1='||extract(VALUE(val2),'//@v1').getStringVal()||']'))) val3) AS T_VAL3) info
FROM TABLE (XMLSEQUENCE(XMLTYPE(an.file_data).EXTRACT('/head/AAA'))) val2) AS T_VAL2) head
FROM (SELECT olr.*
FROM my_table olr,
TABLE (XMLSEQUENCE(XMLTYPE(file_data)).EXTRACT('/head'))) val1) an
PLEASE, help me to rewrite this query!

I assume you're using nested objects like these to hold the result?
create type t_val3_rec as object ( p1 number, p2 number );
create type t_val3 as table of t_val3_rec;
create type t_val2_rec as object ( v1 varchar2(30), v2 varchar2(30), c1 t_val3 );
create type t_val2 as table of t_val2_rec;
/then this query should work :
SELECT t.file_id
     , CAST(
         MULTISET(
           SELECT extractvalue(value(x1), '/AAA/@v1')
                , extractvalue(value(x1), '/AAA/@v2')
                , CAST(
                    MULTISET(
                      SELECT extractvalue(value(x2), '/BBB/@p1')
                           , extractvalue(value(x2), '/BBB/@p2')
                      FROM TABLE(XMLSequence(extract(value(x1), '/AAA/BBB'))) x2
                    AS t_val3
           FROM TABLE(XMLSequence(extract(value(x), '/head/AAA'))) x1
         AS t_val2
FROM my_table t
   , TABLE(XMLSequence(extract(xmltype(t.file_data), '/head'))) x
;

Reason behind this query ,SELECT * FROM table WHERE 1 0

HEllo,
I would like to know the reason behind using this query ,
SELECT * FROM <table> WHERE 1 < 0
before executing the actual SQL query.
Is there any special reason or the JDBC receiver side is configured like that.
Is there any option to overcome this process like, can we remove this option or stop using this.
Why the JDBC adapter basically sending this query on the DB?
Thanks,
Soorya,

Hi,
if you run this query, you wont be able to see any records of the table.
SELECT * FROM <table> WHERE 1 < 0
if you run this query you will see all records
SELECT * FROM <table> WHERE 0 < 1
same with SELECT * FROM <table> WHERE 1=1
So you can check this out that whats happening in your code before executing actual query. just try to co-relate.
regards
Aashish Sinha
PS : reward points if helpful

Query reads directly from aggregates? / BW statistics

Hi,
Query reads directly from aggregates? / BW statistics
1.
How do you switch on BW statistics collection for a Cube?
And what is the signification on switching this statistics on?
2.
In selecting an infoprovider for query a to read against, do we select a cube and the cube automatically reads from the cubes aggregates or
can the query be defined to read directly from the aggregates?
If the answer is to run the report against a cube, then how do we direct the query to read from the aggregate of the cube instead of the cube?
Thanks

How do you switch on BW statistics collection for a Cube?
And what is the signification on switching this statistics on?
Go to RSA1 - info provider tree and on menu - tools - BW statistics for info provider. Click that and you will get a pop up of all providers and check the boxes "OLAP or WHM" The signifinfance of this, is when you collcect statistics, and run reports out of BW statistics cubes, you can monitor load and reporting performance and also navigational patterns of reports by users.
In selecting an infoprovider for query a to read against, do we select a cube and the cube automatically reads from the cubes aggregates or
can the query be defined to read directly from the aggregates?
NO. We dont set it.The OLAP will use aggregate if it finds anything suitable.
Ravi Thothadri

Query Data From Table Synonym

Hi Experts,
I encountered an issue when querying data from a table synonym. Some newly created data can be found in the physical table, but not seen from its synonym created in another schema. What could cause this?
Thanks for your help.

The synonym is defined as:
CREATE OR REPLACE SYNONYM "APPS"."synm_table1" FOR "CN"."table1";
When I query from APPS schema:
select * from synm_table1 where last_update_date>'16-jul-10'
I get nothing.
When I query:
select * from CN.table1 where last_update_date>'16-jul-10'
I get the expected rows.What are the results of
select owner,object_name,object_type from dba_objects where object_name='SYNM_TABLE1';

Producing nested xml with querying attributes from a nested table

How can one produce nested xml querying columns from a nested table? Looking at the object documentation, I can readily unnest the tables. Using your examples in the book, unnesting is select po.pono, ..., l.* from purchaseorder_objtab po, table (po.lineitemlist_ntab) l where l.quantity = 2;
what if I don't want to unnest and don't want a cursor. I would like to produce nested xml.

Gail,
Although you can use XSU (XML-SQL Util) in 8.1.7, I would recommend that you upgrade to 9i for much better support (both in functionality and performance) of XML in the database. For example, in Oracle9i there are:
- a new datatype - XMLType for storing and retrieving XML documents
- DBMS_XMLGEN package and SYS_XMLGEN, SYS_XMLAGG functions for generating XML document from complex SQL queries
- A pipelined table function to break down large XML documents into rows.
You can check out some examples using SYS_XMLGEN and DBMS_XMLGEN for your specific needs at http://download-west.oracle.com/otndoc/oracle9i/901_doc/appdev.901/a88894/adx05xml.htm#1017141
Regards,
Geoff

How to query the count of the temporary table from user_objects

e.g. select count(*) from user_objects where object_type='TABLE'
According to the SQL,I can query the all table including the temporary table,Can I how to query the count of the temporary table from user_objects excluding the permanent table?
thanks a lot!

select count(*) from user_objects where object_type='TABLE' and temporary = 'Y'

Query directly the EM DB tables?

Hi,
Is it possible to query directly the DB sitting behind the EM web front end? Where will this DB normally be found, name of the DB, schema, user account, default password?
Thanks,
Yoni

Hi,
The URL used shows the hostname where the database is running.
Ask the dba or systems admin fir the oracle user account details on the machine
Then log in to the machine.
Thanks
M

Not able insert ,query data from forms

hi,
I am not able to insert data or query data from forms(10g devsuite).getting error frm-40505,frm 40508 .i am able to insert and select record from sql plus.the block ihave created is control block .it is connected to the table using the properties.
should i do anything to insert record.please help

the block ihave created is control block .it is connected to the table using the properties.A Control Block, by definition, is a non-database block. This means the block is not directly connected to a table so you have to manually display data in the block and any DML you want to perform on data in this block you must do manually as well.
There are four database objects you can base your database block on; 1) a Table, 2) a View, 3) From Clause Query (basically an In-line View), and 4) a database stored procedure. I recommend you use one of these four methods rather than manually display your data.
Craig...

ORA-22905: cannot access rows from a non-nested table item in Table func

I am using a table function in Oracle 8.1.7.4.0. I did declare an object type and a collection type like this:
CREATE TYPE t_obj AS OBJECT ...
CREATE TYPE t_tab AS TABLE OF t_obj;
My table function returns t_tab and is called like this:
SELECT ... FROM TABLE (CAST (my_pkg.table_fnc AS t_tab)) ...
This works pretty well as long as I run it in the same schema that owns the function and the 2 types. As soon as I run this query from another schema, I get an ORA-22905: cannot access rows from a non-nested table item error, even though I granted execute on both the types and the function to the other user and I created public synonyms for all 3 objects.
As soon as I specify the schema name of t_tab in the cast, the query runs fine:
SELECT ... FROM TABLE (CAST (my_pkg.table_fnc AS owner.t_tab)) ...
I don't like to have a schema hard coded in a query, therefore I'd like to do this without the schema. Any ideas of how to get around this error?

Richard,
your 3 statements are correct. I'll go ahead and log a TAR.
Both DESCs return the same output when run as the other user. And, running the table function directly in SQL*Plus (SELECT my_pkg.table_fnc FROM dual;) also returns a result and no errors. The problem has to be in the CAST function.
Thanks for your help.

Query directly from Lookup [QualifiedFlat] multivalued table

Similar Messages

Maybe you are looking for