Querying data from the maintenance view.

Hi Experts,
Well, i need the STEXT field value from the maintanance view V_T591A created for the standard table T591A.
Table T591A has the field Subtype but doesn't have the field Stext, which consists the description of the subtype. The Stext field is there in the maintenance view V_T591A.
So, if i want to query the respective description of the specific subtype, how do i get the values from the maintenance view?
Please advice.
Thanks in anticipation to all!
Cheers,
Sundar.

Atish,
It is not possible that way! U cannot Query directly from MV as a DB table.
Anyways, i managed to find the answer.
Thanks though.
Regards,
Sundar.

Similar Messages

Use evdre to query data from a SQL View

Hi all
I believe that it is possible to use evdre to query data from a SQL View. If this is possible then how does one go about setting it up in the evdre options (assuming that the view has already been created)?
Regards,
Byron

Byron, perhaps this is no longer supported, it might be worth opening up a case at service.sap.com on this. However, I did find the following on Page 11 of the "Usages and Considerations of EVDRE" pdf file. This doc is imbedded in the helpfile for BPC 7 SP5 (which was released in August of 2009, well after note 1315011 was last updated.
It looks like you are limited to one custom view per application, since you have to name the view in a parameter at the APPLICATION level. Go into BPC Administration, login to the application related to the custom view, choose "Set Application Parameters" and enter the name of the view to the Application Parameter called "EVDRE_QUERYVIEWNAME" If it is not listed, go ahead and create it at the bottom of the Application parameter screen.
Also: I interpreted the following info from Page 10 of the same doc:
In your EVDRE, set the following options:
QueryEngine: MANUAL
QueryType: enter either NEXJ OR TUPLE see below:
NEXJ - Use two-dimensional queries using the nonemptycrossjoin function
TUPLE - Use two-dimensional queries using tuples"
And I'm assuming you'd enter a Y for the following two parameters:
QueryViewName
"..to enforce the query engine to use a used-defined SQL view of the fact tables, when trying to read the values using SQL queries. This option is typically used in conjunction with the SQLOnly option (see below). "
Option SQLOnly
"..to enforce the query engine to only execute SQL queries, when reading data. This can be achieved using this option."

Hi experts, how to use open sql to read data from one " maintenance view"?

i want to use this part of data within report ,so how to use open sql statement to read data from one " maintenance view"?

Hi
You can't use OPEN SQl statements to fetch data from maintenance view
You have to use only Database views
see the different types of views and the difference
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Reward points for useful Answers
Regards
Anji

Retrieve data from a maintenance view

Hello,
I created a specefic table.
i want to add a check when deleting lines from a maintenance view.
How to retrieve selected data ?
thanks,
Meriem.

Hello Sudeesh,
I think i must use extract table and Field Symbol <XMARK>.
Can any body give an exemple.
thanks,
Meriem.

Querying data from the buffer_cache

Hi,
I'm running an experiment on my own home database to understand how data is retrieved from the buffer_cache. Using Oracle 10g 10.2.0.3.0. I've populated 2 tables with 10million records each. The table structure is as follows.
create table bigtable(col1 varchar2(50), col2 varchar2(50))
create table bigtablechild(col1 varchar2(50), col2 varchar2(50))
bigtablechild.col1 is a foreign key to bigtable.col1 and there are no indexes on the tables.
When I run this query, it takes about 30 s to return data each time it runs. I can also see hard drive activity running on my handy hard drive monitor utility each time. I thought that once the data is loaded into the buffer_cache, the query wouldn't scan the hard disk for data. Could someone please help me understand what is happening?
select b.col2 from bigtable a, bigtablechild b where a.col1 = b.col1 and a.col1 = 'ABC8876'
| Id | Operation          | Name          | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads |
|* 1 | HASH JOIN         |               |      1 |      5 |      5 |00:00:23.00 |   93671 | 90663 |
|* 2 |   TABLE ACCESS FULL| BIGTABLE      |      1 |      1 |      1 |00:00:14.26 |   57799 | 54931 |
|* 3 |   TABLE ACCESS FULL| BIGTABLECHILD |      1 |      5 |      5 |00:00:08.74 |   35872 | 35732 |
-------------------------------------------------------------------------------------------------------Edited by: arizona9952 on Jan 19, 2013 9:38 AM

It's not the o/s RAM that would be used for the caching of the data but the amount of RAM that youhave designated as buffer cache within your SGA , that would be used for it. You are probably running the tests on large tables and you don't have enough sized buffer cache. It's correct that with the buffer cache, next time, the access is done from the buffer cache provided it holds the data. Using some small tables you can see this behavior like below,
SQL*Plus: Release 11.2.0.3.0 Production on Sat Jan 19 22:48:14 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
startConnected to an idle instance.
SQL> startup
SP2-0734: unknown command beginning "startstart..." - rest of line ignored.
SQL> startup
ORACLE instance started.
Total System Global Area 263639040 bytes
Fixed Size                  1344312 bytes
Variable Size             205524168 bytes
Database Buffers           54525952 bytes
Redo Buffers                2244608 bytes
Database mounted.
Database opened.
SQL> set autot trace stat
select
SP2-0042: unknown command "s" - rest of line ignored.
SQL> select * from scott.emp;
14 rows selected.
Statistics
         57 recursive calls
          0 db block gets
         87 consistent gets
         11 physical reads
          0 redo size
       1454 bytes sent via SQL*Net to client
        419 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          6 sorts (memory)
          0 sorts (disk)
         14 rows processed
SQL> /
14 rows selected.
Statistics
          0 recursive calls
          0 db block gets
          7 consistent gets
          0 physical reads
          0 redo size
       1454 bytes sent via SQL*Net to client
        419 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
         14 rows processedYou can see that the next time when the query is run, there are no physical IO's but only logical ones.
HTH
Aman....

How to read data in a program from a MAINTENANCE View

Hi Experts,
Requirement:
1. I have maintained a maintenance view on three Database tables.
2.Data can be entered in the view as it is a Maintenace view as i have created maintenance generator for that and it is a requirement.
3. In one of my programs i need to read this data, into an internal table, that is maintained through this view.
Problem: When i am firing a SELECT query on this view, it goves me a syntax error that i cannot get data by select query on a Maintenance view.
Solution required for: Is there any way i can get the data from this Maintenance view.
Thanks in advance for your exteemed replies.
Regards,
Raghavendra Goutham P.

Hi,
   Only projection view or database view can be used
   in select query.
    Find the tables used in view and
   Select data into report program by
    joining tables .
Regards
Amole

Query Regarding Fetching of Maintenance View

Hi Experts
I have one query regarding fetching of Maintenance View.
My Maintenance View is consisting of only one table.
so i am unable to fetch the data using inner join.i also found
one FM VIEW_GET_DATA which fetches entire table with out
any condition it may lead to performance issue. kindly suggest
how do i fetch the data from such Maintenance View.
Thanks
Nishita G

Hi,
You can Direct Use the DML operations on the Underlying Database Table.( example 'SELECT' Statement and use 'WHERE' Condition for required output ).
Regards
Pavan Kumar

Send data from 2 table view to a RFC

Hi All,
What I try to do is following:
I have two table view A and B, which contain data, which I need both for the RFC. Now I can Toolbar for one of the tables and connect both tables to the RFC, both with the action caused by the button.
But only the data from the table view with the button is sent to the RFC.
Has anyone an idea what I could do?
BR Matthias

Hi Matthias,
have you defined an action like 'submit' and declared the events in the transition like '*submit'?
Best Regards,
Marcel

Trying to query data from a view - ORA-01882 and ORA-02063 Errors

Hey there,
I tried to query data from a view that was provided by a colleague. This view works fine and gives correct data using PL/SQL Developer or SQLPLUS, but in SQL Developer, I get the following error:
ORA-01882: Time zone region not found
ORA-02063: preceding line from SYSTOOLS
01882.00000 - "timezone region %s not found"
* Cause: Specified reason name was not found
* Action: Please contact Oracle Customer Support
Vendor Code 1882
Where comes this error message from?! SYSTOOLS is the database link.
Can't see an obvious reason for this error.
OS is Windows 2000 SP4, SQL Developer is v1.1.1.25 BUILD MAIN-25.14
Regards,
Thomas

From Oracle Messages 'Cause and Action'
http://www.oracle.com/technology/products/designer/supporting_doc/des9i_90210/cmnhlp72/messages/ora_messages.htm
ORA-01882, 00000, "timezone region %s not found"
Cause: The specified region name was not found.
Action: Please contact Oracle Customer Support.
Maybe invalid region in NLS_LANG?
"select * from v$nls_parameters"
Starting this script in all developer program and compared result...

Get the data from the structure OR View

Hi All,
how wud i take data from the structure OR View? when i m writing the select query then its saying that its not defind in data dictionary.
I hav the requirement to develop a report for PM module..
in that i hav all structure like AFVGD,CAUFVD,PMCOEA...
Plz tel me how to write a select quary for this...

Hi,
You cannot select data from a structure.
A structure / work area contains data only at the run-time.
You can select data from views and tables.
The data you need to select will be in Database tables. All you need to do
is to find those table and select from there.
Let me know if you need further help.
Regards,
Rajat

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

How can I enter the data from the recordset into your insert query

Hi
i would like to know how I can enter the data from the recordset into your insert query without using a hidden field.
thanks
------------------------------------------------------------------------------------Below is the code------------------------------------------------------------------------------------- -----
<?php require_once('../../Connections/ezzyConn.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
   $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frmpostComment")) {
   $insertSQL = sprintf("INSERT INTO comments (com_topic, com_user, title, com_content, com_date, online_id) VALUES (%s, %s, %s, %s, %s, %s)",
                       GetSQLValueString($_POST['com_topic'], "int"),
                       GetSQLValueString($_POST['commentby'], "int"),
                       GetSQLValueString($_POST['title'], "text"),
                       GetSQLValueString($_POST['com_content'], "text"),
                       GetSQLValueString($_POST['com_date'], "text"),
                       GetSQLValueString($_POST['online_id'], "int"));
mysql_select_db($database_ezzyConn, $ezzyConn);
$Result1 = mysql_query($insertSQL, $ezzyConn) or die(mysql_error());
$insertGoTo = "index.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
$colname_rsCommentby = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsCommentby = $_SESSION['MM_Username'];
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsTopics = "SELECT topic_id, topic FROM topics ORDER BY topic_date DESC";
$rsTopics = mysql_query($query_rsTopics, $ezzyConn) or die(mysql_error());
$row_rsTopics = mysql_fetch_assoc($rsTopics);
$totalRows_rsTopics = mysql_num_rows($rsTopics);
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsOnline = "SELECT online_id, `online` FROM `online` ORDER BY online_id DESC";
$rsOnline = mysql_query($query_rsOnline, $ezzyConn) or die(mysql_error());
$row_rsOnline = mysql_fetch_assoc($rsOnline);
$totalRows_rsOnline = mysql_num_rows($rsOnline);
$colname_rsCommentby = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsCommentby = $_SESSION['MM_Username'];
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsCommentby = sprintf("SELECT user_id, username FROM users WHERE username = %s", GetSQLValueString($colname_rsCommentby, "text"));
$rsCommentby = mysql_query($query_rsCommentby, $ezzyConn) or die(mysql_error());
$row_rsCommentby = mysql_fetch_assoc($rsCommentby);
$totalRows_rsCommentby = mysql_num_rows($rsCommentby);
?>
<?php include("../includes/access.php"); ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>ezzybay - easy click, ezzy shopping</title>
<link href="../css/global.css" rel="stylesheet" type="text/css" />
<link href="../css/navigation.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
<?php include("../includes/top.php"); ?>
<div id="content">
<div id="pageTitle">
    <h2>CMS Section:</h2>
    <p>Comment Topics Page</p>
</div>
<?php include("../includes/leftnav.php"); ?>
    <div id="mainContent">
      <form action="<?php echo $editFormAction; ?>" method="post" name="frmpostComment" id="frmpostComment">
        <table align="center">
        <caption>Post Comment</caption>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right">Topic:</td>
            <td><select name="com_topic" class="listbox" id="com_topic">
              <?php
do {
?>
               <option value="<?php echo $row_rsTopics['topic_id']?>"><?php echo $row_rsTopics['topic']?></option>
              <?php
} while ($row_rsTopics = mysql_fetch_assoc($rsTopics));
$rows = mysql_num_rows($rsTopics);
if($rows > 0) {
      mysql_data_seek($rsTopics, 0);
      $row_rsTopics = mysql_fetch_assoc($rsTopics);
?>
            </select></td>
          </tr>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right">Title:</td>
            <td><input name="title" type="text" class="textfield" value="" size="32" /></td>
          </tr>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right" valign="top">Comment:</td>
            <td><textarea name="com_content" cols="50" rows="5" class="textarea"></textarea></td>
          </tr>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right">Status:</td>
            <td><select name="online_id" class="smalllistbox">
              <?php
do {
?>
               <option value="<?php echo $row_rsOnline['online_id']?>" <?php if (!(strcmp($row_rsOnline['online_id'], 2))) {echo "SELECTED";} ?>><?php echo $row_rsOnline['online']?></option>
              <?php
} while ($row_rsOnline = mysql_fetch_assoc($rsOnline));
?>
            </select></td>
          </tr>
          <tr> </tr>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right"> </td>
            <td><input type="submit" class="button" value="Insert record" /></td>
          </tr>
        </table>
        <input name="commentby" type="hidden" id="commentby" value="<?php echo $row_rsCommentby['user_id']; ?>" />
        <input type="hidden" name="com_date" value="<?php echo date("d/m/y : H:i:s", time()) ?>" />
        <input type="hidden" name="MM_insert" value="frmpostComment" />
      </form>
    </div>
</div>
<?php include("../includes/footer.php"); ?>
</div>
</body>
</html>
<?php
mysql_free_result($rsTopics);
mysql_free_result($rsOnline);
mysql_free_result($rsCommentby);
?>

I'll keep it simple and only use the date as an example. Hopefully you get the concept from the example. Basically you create a recordset and insert the recordset value instead of the POST value into your insert query. In the example below I declared a variable for $the_date and entered the variable into the INSERT query instead of the hidden POST field.
<?php require_once('../../Connections/ezzyConn.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
   $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$the_date = date("d/m/y : H:i:s", time());
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frmpostComment")) {
   $insertSQL = sprintf("INSERT INTO comments (com_topic, com_user, title, com_content, com_date, online_id) VALUES (%s, %s, %s, %s, %s, %s)",
                       GetSQLValueString($_POST['com_topic'], "int"),
                       GetSQLValueString($_POST['commentby'], "int"),
                       GetSQLValueString($_POST['title'], "text"),
                       GetSQLValueString($_POST['com_content'], "text"),
                       GetSQLValueString($the_date, "text"),
                       GetSQLValueString($_POST['online_id'], "int"));
mysql_select_db($database_ezzyConn, $ezzyConn);
$Result1 = mysql_query($insertSQL, $ezzyConn) or die(mysql_error());
$insertGoTo = "index.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
?>

Very slow pasting data from the Clipboard into a Sharepoint 365 list by using the Quick Edit view

<p>In sharepoint 2010 it was very fast to paste data from the Clipboard by using the Data Sheet view. Why is it so slow in Sharepoint 365 when using the Quick Edit View? is there a workaround?</p><p>also in Sharepoint 365 if you try to
paste a large number of records (2,000) it will freeze.</p>

I'm interest about same thing. Clipboard is often only way to migrate lists between sharepoint versions and now it is almost unpossible to use.

THE DATA FROM THE ORACLE DATABASE VIEW DATA IS NOT REFERESHED AUTOMATICALLY

THE DATA FROM THE ORACLE DATABASE VIEW DATA IS NOT REFERESHED AUTOMATICALLY IN OBIEE DASHBOARD(ANSWERS)
UNLESS AND UNTILL I OPEN THE ORACLE BI ADMINISTRATOR TOOL AND DO UPDATE ALL ROWCOUNT AND THEN SAVE THE RPD.
WHERE AS ORACLE DATABASE TABLE DATA IS AUTOMATICALLY REFRESHED.
PLS SOMEONE HELP OUT IN THIS ISSUE.

Check whether you have enable cache on that view?

Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal repor

HI Expert
Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal report
Need Step by Step Procedure whatl all we come across while Generating report from SAPBI (ECC(Functionmodule/view/BAPI)
to Crystal report what all integration and setting we need to do
Thanks and Regards
AhmedPasha

Hello,
Ingo Hilgefort has documented this step by step in this SCN article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe?QuickLink=index&overridelayout=true
Starting on page 13, you can use the same steps - he selects data from a table join, you select FN instead for function module.
You can also get to it via this link:
http://www.sdn.sap.com/irj/sdn/business-objects-bi-for-sap?rid=/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe
Regards,
Tammy

Querying data from the maintenance view.

Similar Messages

Maybe you are looking for