Query display incorrect data by authorize object

I have 2 location (1001, 1002).
And I set 0plant for authorization. I set 'AA' user for display 1002 location.
I create stock query, that it can input location by 0plant infoobject.
(New variable -> processing by: Authorize -> selection and optional and ready for input)
Result:
Input 1001 -> I receive "No Authorize" -> OK
Input 1002 -> I receive 1002 data -> OK
Input 1001,1002 -> I receive "No Authorize" -> Not OK -> I want to display only 1002 data
No input -> I receive all data both 1001 and 1002 -> Not OK -> I want to display only 1002 data
please help me
critical solution is no input case

Hello A J,
are you using the (new) concept of analysis authorizations?
If yes, then think about this important rule: authorizations do not work as a filter. Authorizations define the area that the user is allowed to see, but you still need to define the filters in the query in order to make sure that the query does not select more than the user is authorized to. The variable that you created should help the user filter the data, so it should show you only 1002 in the F4 help, but not 1001. If, however, the user manually enters something out of the authorized area, he should get a "not authorized" error.
So, in your cases:
- Input 1001,1002 -> I receive "No Authorize" -> Not OK -> I want to display only 1002 data
Query tries to select both plants, but the user is only authorized to 1002, so "no authorization" message is expected
- No input -> I receive all data both 1001 and 1002 -> Not OK -> I want to display only 1002 data
This should not happen. Are you sure that data for 1001 is also displayed? If yes, check the authorization log via RSECADMIN to see which authorization allows the user to see plant 1001.
I hope this helps.
Regards,
Maxim

Similar Messages

Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air

Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air. Date on Windows 8.1 is correct. Thank you.

Try doing a reset on your phone. Sounds like your carrier's time set is not getting through to your device. If the reset doesn't do it, then go to Settings>General>Reset>Reset Network Settings. That should do it.

Query displaying from date & to date selected from calendar

Hello every1,
I just want to create a query which will display from date and to date which i need to select it from the calendar.
Can any1 help me out for it.

HELLO,
ACTUALLY I HAVE A FIELD CALLED DUE DATE IN MY UDT WHERE I HAVE ENETERED SOME MY DUE DATES. NOW WHEN IAM CREATING A QUERY FOR DUE DATE AS FOLLOW:
SELECT * FROM DBO.[@LC_OV_H] T0 WHERE T0.DUEDATE>='[%0]' AND T0.DUEDATE<='[%1]'
IT IS GIVEN ME A LIST OF THE DUE DATES WHICH I HAVE ENTERED BUT HERE I WANT A CALENDER TO BE DISPLAYED DURING SELECTION.........
Edited by: MEGHSHILPK on Jul 17, 2010 10:07 AM

ECT List View Web Part displaying incorrect data when View Item

I have a External Content Type which pulls data from a stored procedure. The stored procedure has 1 parameter - the users logon id. The data retrieved is a list of meetings with start date time, end date time, location, subject, etc. From this ECT there
is an External List which displays all data correctly.
There is 2 pages within the site and its subsites that have list view web parts which display a subset of the info from the external list. When the user clicks a specific meeting to display the complete info on the meeting, the wrong information is displayed,
it always displays the info for the 1st meeting in the list. So, I displayed the BDC Identity field on the list and this field is identical for all the rows since the key for the ECT is the username and hence not unique.
I've spent all day trying to finding a way to resolve this and have come up empty. I've tried to find a way to make the BDC Identity field to be unique, using Business Data View web part, Data View web part, and nothing.
The user needs to be able to click the My Meetings url header on the above pages to see a full list of their meetings so I need the external list. Any ideas how to make the BDC Identity field unique or how to get the View Item on the List View web part to
work correctly?

Sorry, I do not understand what you mean.
I resolved the non unique BDC Identity problem by simply adding the row # to the Username in the stored procedure so the BDC Identity fields on the list records are now unique (although they're really long ie. __bk44003500070057003700560027000200140037003700f600360096001600470056003300,
__bk44003500070057003700560027000200140037003700f600360096001600470056004300 etc). Not sure how it generates the BDC Identity?
I still see the same behaviour when you select a meeting to display the details. It always displays the 1st record in the list.
I added code to the DispForm to display the ID when the page loads and the BDC Identity from the record and verfied that they do match.
I can add another parameter to the stored procedure and just return the row # in that field. What do you mean by make the identifire as Identity in operations?

I am having trouble with the calendar displaying incorrect dates and times

I am currently receiving calendar invites that i know are displaying incorrectly in my calendar and i am unsure how to fix this.

Yes its all correct. I have just discovered that a separate calendar was set up with incorrect settings from the originator. I have checked all my settings and I'm good to go. thanks for your response

WebI displays incorrect dates when sourced from SAP

We have several issues, all tied to displaying dates from a BEx Query, through the universe, into WebI.
Scenario One: Dates that have a datatype of date will parse in the universe, but will give driver not capable when used in WebI. Could this be tied to an invalid date?
Scenario Two: Dates set with date datatype parse correctly and can be queried in WebI, but return incorrect results. If queried WITHOUT a measure, date appears as one day less than actual date (ex. SAP date = Apr 28, 2009 but universe object set with date datatype shows April 27, 2009. When a measure is added, the same date displays as Sept 27, 1976.
I suspect that we need to modify the data access files in order to accurately convert SAP dates (which by default come into the universe as Character) to a date datatype. If this is the case, are there sample sapen.prm and sap.sbo files to ensure appropriate settings?
Does anyone have additional thoughts on what could be causing this issue? Are there sample sapen.prm and sap.sbo files anyone would be willing to share?
Thanks!

Hi Robin,
If you are using BOE XI 3.1. Then make sure that you apply fixpack 1.4 on it because the issue you are Describing is Fixed in this fix pack.
Here is the Description of that Particular issue In Release Notes of Fix pack 1.4
      ADAPT01181134
      Description:
      When users create a Web Intelligence document with the universe which is built based on SAP data, it fails to display correct values for some Date objects. This problem occurs when users have a timezone of 'GMT-x hours' on the machine where BusinessObjects Enterprise is installed.
      I hope this would solve your problem.
Thanks,
SK.

IPhoto displays incorrect dates for photos imported from iPod

I recently purchased the iPod Camera Connector for use with my 4G iPod with color display (iPod Photo). I took a few pictures on my Canon SD110 digital camera and used the Camera Connector to copy the pictures to my iPod. I then plugged the iPod into the computer, opened iPhoto, and imported these pictures from the iPod. All of this worked without a hitch.
However, I noticed that the roll of images that iPhoto created is dated incorrectly (it says 12.31.2000). The photos themselves have the correct date (5.21.2007) but the incorrect time (3:15p instead of 6:15p).
My camera, computer, and iPod are all set to the correct date and time. Any idea what's causing this? It's not a particularly big deal as I can just change the dates on the rolls to match what the photos say (and adjust the times on the photos to be 3 hours ahead), but I shouldn't have to do this if all of the date/time information is set correctly.

All photos from the My Photo Stream go into a monthly Event. If you sort your Events by Date - Descending the most recent Events will be at the top of the Event window. The monthly Events will look like this:
OT

Variable displaying incorrect data for selection in template

Hello Friends,
We have an InfoObject 0CALMONTH. On this InfoObject we have created a variable PERIOD (Z_INTER). This InfoObject and variable is used in two queries (A & B). In BEx the variable is working fine for both the queries, that means the variable shows the correct period (04/2005 to 01/2007). This data exists in our dataprovider.
Now in a web template, I pull a chart and associate query A as the dataprovider and the variable works fine. It also does so if I associate query B as the dataprovider. The problem starts when I pull two charts, simultaneously in the template, and associate one with query A and other with query B. This time the variable acts funny and shows and incorrect period for selection (03/1995 to 03/2005). We do not have any data for the year 1995 to 2004 in the dataprovider.
So you see individually the queries (and variable) run fine but as soon as I ask them to co-exist in the same template, I get aberrations. We are not sure from where this previous years data is being pulled.
Please assist. Thanks!
Regards,
Prem.

Hi,
I feel 1995 year data should be available in any one of the cube. Check the complete data in the cube directly with 'manage' tab or 'listcube' transaction code.
And one more idea in my mind is, remove the variables from the queries and use 'filter' option in WAD for filtering the caleder month.
Try this also: Use only one variable for both reports. I mean to say, remove variable in one report. Check whether both reports also running fine.
Once you try this, let me know the status. According that we will try more things.
Regards,
Vivek V

Bex Query showing incorrect data

Hi Experts,
I have a Bex query on an infoset. The infoset is based on Sales Order Line Item DSO and Sales Order Condition DSO. I am refering Net value from Sales Order Line Item DSO. In the query, the values of Net Value is not coming correctly. When i check the value in Sales Order Line Item DSO it shows 100. However, in the query it shows 500. When i checked the infoset, it had 5 records. In each record, the net value was 100. What should i do to get the correct value of Net Value in the query.
Have anyone faced similar problem ?
Please reply as soon as possible.
Thanks,
Saachi

Hi Sachi,
This is a common problem in infoset.
Sales order line item - SLI say
Sales order condition - SC say.
The value you see in your net value field depends on your join condition in the infoset.
Currently you have join in such a way that 1 record in SLI correspods to 5 records in SLC (this is as per your join condition), hence you see this error. Youcan manupilate your join condition to get the required result, if this is viable.
However, in most cases you may not be able to alleviate the fields defining the join.
Say your sales order and item form the joining fields, then in sales order condition DSO you have 5 records for that sales order and item.
The way you could probably avoid net value getting multiplied 5 times is by using exception aggregation with reference char a characteristic in the query.
The ref char should uniquely identify the 5 sales order item condition lines.
(basic principle - we have to net value/ no of lines in Sales order condition DSO [5 in this case] .)
The problem, however is, whenever you consider uniqueness defining fields, you would look at the keys of DSO, because they define uniqueness. One could have multiple infoobject when defining a DSO key.
So you would'nt be able to define any record with only one particular infoobject(ref char), based on which you could define the exception aggreation.
You could define one more data field in the DSO which is a concatenation of all of its keys and then use it in exception aggreg as a reference char in the query.
One more way is to load data from the two DSO to further cubes to achieve the requirement.
I think, this is the limitation with the infoset.
Please let me know if you find any other solution.
Hope it helps,
Regards,
Sunmit.

Sales order query - display invoice date and invoice number

I have a query that is reading information from both the ORDR and RDR1. How do I link to AR invoice to get the invoice number and invoice date if the line item of the sales order has been shipped (we do not use deliveries so the AR invoice is the next document after the sales order.
Thanks

Hi Keith,
The link between ORDR and RDR1 to invoice:
RDR1.trgetentry = OINV.DocEntry
or
INV1.BaseEntry = ORDR.DocEntry
Use which is more appropriate to your query
Regards,
David

Hypertrend Cursor displaying incorrect data

Upgrading to Lookout V6.6 build 49152 from 5.1. The hypertrends work but the cursor information is always the same and doesnt change when moving the cursor.

Here is a hypertrend with the cursor in two different positions. The value is 37 for this trend line no matter where the trend is when it is opened. Other trend lines are stuck at different values.
Attachments:
Lookout_1.jpg ‏255 KB
Lookout_2.jpg ‏255 KB

Regarding Authorization object's changed date..

Hi All,
Could someone help me, I wanna a table name which holds the changed/modify date for Authorization object..
e.g. change date for S_TCODE etc.....
Regards,
Ankur

Hi,
Try Trx SU21, search for S_QUERY with Find button, double click on S_QUERY Object and Click on Permitted Activities. Use the Display<->Change Button for Modify.
Angelo.

CFChart Displaying False Data

I posted a question previously about grouping CFChart output
that was answered by MikeRoo. I thought it was solved and marked it
as such. However, this morning I discovered that the Chart
contained invalid data -- data that is not in the database. I did
not see a way to change the previous thread to "Unanswered" so I'm
posting this new thread -- for which I apologize ahead of time if
I'm not supposed to do it this way. But this is more of a problem
than the grouping was because it is showing false results.
I want to display a Bar graph with TQs along the X axis
(bottom) and Percentages along the Y axis (side). But I need a
percentage of each InsideTQ and OutsideTQ for each Originator.
What is happening is that I'm getting InsideTQ and OutsideTQ
values for Originators that do not have that TQ. For example:
Originator 00021
TQ 3
InsideTQ 40 percent
OutsideTQ 60 percent
TQ 6
InsideTQ 44 percent
OutsideTQ 56 percent
But what I'm seeing on the graph is that Originator 00021
shows a TQ 5 with an InsideTQ and OutsideTQ value, but there isn't
a TQ 5 for this Originator. This particular Originator should only
have 5 values on the chart, yet there are 13 being displayed for
it. I've double checked the tables, I've created temp tables from
my queries to step through each query and query of query. My
queries are correct and they display the data correctly on the
report table. But the CFChart is showing false data. The good news
is that all of the data that is really is in the database is shown
correctly on the chart...just seems to make up other data.
Attached are my queries, chart, and table. I have a jpg of
the chart if anyone thinks that might help...
I REALLY appreciate your help.

MikerRoo,
Yeah it's a LOT of code...that is why I was trying to give it
to you in pieces, didn't want to scare you off ;-)
Something I tried yesterday: I pulled the CFChart out and
opened it in a new window with just the attached code and it still
displays incorrect data. My best guess on where the data is coming
from -- it is some how ignoring my more specific filters and
returning data for rows where the Originator or TQ is NULL though I
specify not to include those. I use the NULL Originator and TQ
fields for my roll up counts but I don't want them in the chart.
However, when I've found strange values in the chart, they all
point back to a row in the table with a NULL Originator or TQ. Now
on my table, those values are being filtered correctly. So, I'm
still blaming the chart and not my queries...just wish I knew why!?
Again, any time you have when you can help, it is
appreciated. I'm going to lock down the filters so that the users
can only select 1 Originator and/or 1 Object. This way the report
in production will display correctly until we can solve the problem
in the development report.
Side Note: I downloaded a trial version of Chart Director. I
just started looking at it yesterday, spent a few hours trying to
figure out how I would get it to work with my CF site. I'm such a
CF geek that I forget about those other languages...we have .NET,
we have VB, and other assorted development tools so it shouldn't be
too difficult to figure out how to fit it into the current
reporting tool. I'll let you know how it goes...also the book you
suggested "Visual Display of Quantative Information" does that
cover Chart Director? Trying to get our Project Lead to purchase
Chart Director and a few books so I don't bang my head against the
wall on these charts...
Thanks again and hope to hear that you had an epiphany...I'll
let you know if I have any!

Report to view user nm, authorization objects, activity, transaction code.

Hi All,
I want to view a user-wise report that displays the transaction code, authorization objects and activities for which the user has authorization.
Is there any standard report to view all this at a glance?
Can anybody help me on this?
Thanks.

u can try SUIM tcode
its really helps u
regards,
Abhilash

Maintain assignments of authorization objects for Z Webdynpros in SU24

Hello experts,
When we display the assignments of authorization objects for External Services - Webdynpros in transaction SU24, Z_webdynpros are not shown in the screen.
We need to add more webdynpros in that table.
I suposse that there must exist a way for updating that table with the Z webdynpros developed or some configuration is needed.
Thanks in advance...
Hector Longarte

The Zwebdynpros I am talking about are Java Webdynpros in the SAP Portals, and the SAP ERP is onlyan ABAP stack.
Is this configuration posible??

Query display incorrect data by authorize object

Similar Messages

Maybe you are looking for