Query doesn't pull data within Report

Hi All,
For some odd reason, I can run the following query against my informix database using DbVisualizer or Sql Editor just fine. But when I press F5 in Crystal report, I get nothing back. Any suggestions?
SELECT
    screenlog.user_id, screenlog.session_id, screenlog.full_query
FROM
    screenlogdb@ol_xxxpdb99991:informix.screenlog screenlog
WHERE
    (screenlog.full_query LIKE '%201111%' OR
    screenlog.full_query LIKE '%511111%' OR
    screenlog.full_query LIKE '%601111%' OR
    screenlog.full_query LIKE '%9549658111%' OR
    screenlog.full_query LIKE '%9549658111%' OR
    screenlog.full_query LIKE '%9549658111%' OR
    screenlog.full_query LIKE '%9549658111%' OR
    screenlog.full_query LIKE '%TAA-9403-234%') AND
    screenlog.user_id NOT LIKE '%pthn.com'
ORDER BY
    screenlog.user_id ASC,
    screenlog.session_id ASC
Thanks.
Matt

Hi Matt,
Which ODBC driver are you using and what version of Crsytal Reports are you using?
Thank you
Don

Similar Messages

WITH Clause query doesn't work in Oracle Reports.

Hi Gurus,
I'm using a WITH clause query and need to build a report using the same query.
But when i'm trying to build a report, query is giving error as "WITH clause table or view doesn't exists".
But the same query perfectly works in sql prompt.
Oracle Reports doesn't supports WITH clause query?
Please suggest.
Thanks,
Onkar

I ran into a similar problem before and worked around it by moving the query to a pipelined function in the database as described at WITH clause unexpectedly causes ORA-00942 in Reports Builder
Hope this helps.

Query doesn't retrieve data after modify multiprovider

Hi all,
I created a backup cube and i put it under my MP, now my query doesn't retrieve the relative archived data.
I don't have any customer exit, and i see the infoprovider in the query filter on infobject 0infoprovider.
i see the data under transaction listcube under the MP, and in new query on the new infoprovider.
please help me!

problem solved, i forgot to match all index!
tnx

SAP Query - how to retrieve data within another program / FM

Hi,
I need to retrieve data from SAP Query, but when I used SUBMIT ..., the program results dump, because it is called within open custor loop.
Is there any another way, some FM or sth else?
thanks
Juraj

I already tried it, but I always get dump with CX_SY_OPEN_SQL_DB exception.
The problem is, that I tried to execute the query within open custor loop and this exception is caused by calling commit work somewhere in query report.
therefore I try to find another way
thanks
Juraj

Measure Formulae for Uploadable and Data collection report

Hi,
I have query related to application of measure Formula for Uploadable and Data collection report.
Consider a scenario where i use a MDX query to create a data collection report and I map these columns from these reports to an rowsource using a loader file. Can I use measure formula feature like onchange to work with Uploadable and Data colection reports such that changes to any one column should take effect in another column.
Regrads,
Wesley

Wesley,
IOP uploadable reports are used for sending data to the server in batch. They are coupled to the IOP model via a rowsource. You have a lot of flexibility with the spreadsheet you build for staging the upload. It's really just a function of how crafty you are with vb. Cascading changes from one column to another can be easily accomplished this way.
Onchange formulas are for something else. They are part of the model definition and are used for describing how to cascade changes between IOP data blocks.

Disco Report doesn't return data for a responsibilty

Hi Guys,
We have a report, we have shared with XXX Tax Manager. When we login through XXX Tax Manager, it doesn`t return data. But when we do similer with XXX Payables Manager, report runs fine and return data?
Can any one help me on this.
Note: Both Responsibility have access to the Business Area.
Thanks,
Nick

Please find the below query:
SELECT /*+ NOREWRITE */
o101613.expense_account_num AS e264170,
o271954.description AS e271961, o271954.po_number AS e272013,
o271954.project AS e272033, o271954.task AS e272035,
o271954.expenditure_type AS e272036, o272183.amount AS e275461,
(o272183.gl_date) AS e275566, (o272183.invoice_date) AS e275578,
o272183.invoice_id AS e275580, o275448.invoice_id AS e275581,
o272183.invoice_number AS e275584,
o272183.self_assessed_flag AS e275674,
o272183.ship_to_location_code AS e275681, o272183.state AS e275685,
o272183.tax_amount AS e275695,
o272183.tax_jurisdiction_code AS e275698,
o272183.tax_rate AS e275700, o272183.vendor_name AS e275720,
o272183.vendor_number AS e275723, (o278494.gl_date) AS e278500,
o278494.liability_account AS e278501
FROM apfg_ap_invoices o101612,
apfg_ap_invoice_distributions o101613,
apps.ap_invoice_lines_v o271954,
(SELECT ap.invoice_id, aps.vendor_name, aps.segment1 vendor_number,
ap.invoice_num invoice_number, ap.invoice_date, ap.gl_date,
apl.amount amount, zxl.tax_amt tax_amount,
zxr.percentage_rate tax_rate, zxl.tax_jurisdiction_code,
apl.ship_to_location_code, zxl.self_assessed_flag,
hzg.geography_element2_code state, apl.line_number
FROM ap.ap_suppliers aps,
ap.ap_invoices_all ap,
zx.zx_lines zxl,
apps.ap_invoice_lines_v apl,
zx.zx_rates_b zxr,
zx.zx_jurisdictions_tl zxj,
zx.zx_jurisdictions_b zxb,
ar.hz_geographies hzg
WHERE aps.vendor_id = ap.vendor_id
AND ap.invoice_id = zxl.trx_id
AND zxl.trx_id = apl.invoice_id
AND zxl.trx_line_number = apl.line_number
AND zxl.entity_code = 'AP_INVOICES'
AND zxl.event_class_code = 'STANDARD INVOICES'
AND zxl.self_assessed_flag = 'Y'
--AND zxr.tax_rate_code = zxl.tax_rate_code
AND zxr.tax_rate_id = zxl.tax_rate_id
AND zxj.tax_jurisdiction_id = zxl.tax_jurisdiction_id
AND zxb.tax_jurisdiction_id = zxj.tax_jurisdiction_id
AND zxb.zone_geography_id = hzg.geography_id
AND zxl.tax_amt <> 0
AND apl.line_type_lookup_code IN
('ITEM', 'FREIGHT', 'MISCELLANEOUS')
AND apl.line_source IN
('HEADER MATCH',
'MANUAL LINE ENTRY',
'IMPORTED',
'CHRG ITEM MATCH'
AND ap.cancelled_date IS NULL
ORDER BY aps.vendor_name, ap.invoice_num) o272183,
apps.ap_invoices_v o275448,
(SELECT xte.source_id_int_1 invoice_id, gcc.code_combination_id,
xte.transaction_number, xal.accounting_date gl_date,
gcc.segment1
|| '.'
|| gcc.segment2
|| '.'
|| gcc.segment3
|| '.'
|| segment4
|| '.'
|| segment5
|| '.'
|| segment6
|| '.'
|| segment7 liability_account
FROM xla.xla_transaction_entities xte,
xla.xla_ae_headers xah,
xla.xla_ae_lines xal,
gl.gl_code_combinations gcc
WHERE 1 = 1
AND xte.entity_id = xah.entity_id
AND xte.application_id = xah.application_id
AND xah.ae_header_id = xal.ae_header_id
AND xal.accounting_class_code = 'SELF_ASSESSED_TAX_LIAB'
AND xal.code_combination_id = gcc.code_combination_id) o278494
WHERE ( (o101612.invoice_id = o101613.invoice_id(+))
AND ( o101613.invoice_id = o271954.invoice_id
AND o101613.invoice_line_number = o271954.line_number
AND ( o272183.invoice_id = o271954.invoice_id
AND o272183.line_number = o271954.line_number
AND (o272183.invoice_id = o275448.invoice_id)
AND (o278494.invoice_id = o275448.invoice_id)
AND (o101613.dist_line_type_code IN
('ITEM', 'FREIGHT', 'MISCELLANEOUS'')')
AND (o101612.invoice_number = :"Invoice Number ")
AND ((o272183.gl_date) <= :"Ending GL DATE")
AND ((o272183.gl_date) >= :"Beginning GL DATE")
ORDER BY o271954.project ASC, o272183.invoice_number ASC;
It does not contain any security profiles, only contains view that might be not returning data.
thanks

The workbook report no authorization, but related query can show part data

Dear All,
We meet an error, The workbook report no authorization, but related query can show part data.
We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO' & ' WZA")(User didn't have authorization for this condition), and workbook report no authorization.
Then we checked authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
But when we execute the related query with same condition. the query can open and show WZA's data.
I'd like to know the reason.
thanks & Best Regards,
Kent Yu

Dear All,
We meet an error, The workbook report no authorization, but related query can show part data.
We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO' & ' WZA")(User didn't have authorization for this condition), and workbook report no authorization.
Then we checked authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
But when we execute the related query with same condition. the query can open and show WZA's data.
I'd like to know the reason.
thanks & Best Regards,
Kent Yu

How to increase the number of data Business Object can pull for a report?

Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
Thanks

Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti.

An error has occurred during report processing. (rsProcessingAborted).. Query execution failed for data set

Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.

in my case the problem is
one virtual machine is for developers
other for testers
in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
the error what testers get is
Error during the local report processing.
Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
and the solution is to use alternative url or in some cases http://localhost/

Query Saying NO Authorization- Data is not visible in report

HI All,
When I ran query no data is coming in the report in quality system. I created a query on multicube , in basic cubes data is there. when I am trying to run a query it is saying no authorization but in Development I am able to see the data in report.Pls can anybody give inputs on this.If any information required pls ask me.
Shah

Hi RSS,
Goto Monitor and check the multicube, if the required fields or data is there.
Check the transport connectivity.
Check this,
Bex- Transport
Hope this helps!

How capture query in data model report

Hi,
I have multiples queries in my data model report >clause WHERE is dynamic in all queries<. I need capture the final query and look what query execute.
Is this posible?, Are there any API that I can use? .
Viktor.

Viktor,
you can trace the report including the sql. Look in te builder at the menu program. there's a tracing option.
Regards
Rainer

One report to pull data from SQL or DB2

Hi Guys,
First post here. I have scoured the internet using our good friend google for answers and have come up empty. I hope someone can help me here!
Some Info: Crystal XI R2, Visual Studio 2005, Ms SQL Server 2005, DB2, VB.NET
What I am trying to accomplish is using one report to pull data from either SQL 2005 or DB2.
The problem I get is if the report is configured to pull data from SQL 2005, I cannot change it using the code below to pull data from DB2. The SQL Report uses the Microsoft OLEDB Provider. The DB2 report uses the IBM DB2 UDB for iSeries IBMDA400 OLEDB provider. When I quickwatch the oCRTable logon information, it seems to retain the other database's info.
Any ideas?
My code:
    Private Sub LoadRpt(ByVal rpt As String)
        Try
            Dim strReport As String
            Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rpt As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim oCRTable As CrystalDecisions.CrystalReports.Engine.Table
            Dim oCRConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo()
            strRptNm = String.Format(".rpt", rpt )
            strReport = String.Format("\{1}", Server.MapPath("Reports"), rpt )
            crReportDocument.Load(rpr)
            '   check to make sure report is loaded; if not, then do nothing
            If crReportDocument.IsLoaded Then
                oCRConnectionInfo.DatabaseName = ConfigurationManager.AppSettings.Item("DataBase")
                oCRConnectionInfo.ServerName = ConfigurationManager.AppSettings.Item("Server")
                oCRConnectionInfo.UserID = ConfigurationManager.AppSettings.Item("Profile")
                oCRConnectionInfo.Password = ConfigurationManager.AppSettings.Item("Password")
                For Each oCRTable In crReportDocument.Database.Tables
                    oCRTable.LogOnInfo.ConnectionInfo = oCRConnectionInfo
                    oCRTable.ApplyLogOnInfo(oCRTable.LogOnInfo)
                    oCRTable.Location = oCRTable.Location
                Next
                For Each rpt In crReportDocument.Subreports()
                    For Each oCRTable In rpt.Database.Tables
                        oCRTable.LogOnInfo.ConnectionInfo = oCRConnectionInfo
                        oCRTable.ApplyLogOnInfo(oCRTable.LogOnInfo)
                        oCRTable.Location = oCRTable.Location
                    Next
                Next
            ... other code ...
            End If
        Catch ex As Exception
            ... other code ...
        End Try
    End Sub
Edited by: Mace Windu on Feb 7, 2009 7:55 AM
Edited by: Mace Windu on Feb 7, 2009 7:56 AM

David,
Your suggestion worked to near perfection. The only problem was that if I configured the datasource locations of the report and sub reports in CR to use the SQL ODBC, the .net program would successfully log in using the DB2 info but had a problem reading the data. If I configured the datasource locations of the report and subreports in CR to use the DB2 ODBC, everything worked! Thanks for the advice.
The force is strong with you.
Mace

Report / Query to show all texts within all customer master records

Hi,
Can anyone let me know if there is a report or a query to show all texts within all customer master records?
Many Thanks
Aries

Hello Aries,
I don't believe there is a standard SAP report that does this.
But,...
You can see all the customer text types (Customer SD) using transaction VOTX.
Table TTXID contains the same info using Text Object "KNVV".
If you decide to have a custom ABAP developed use function READ_TEXT. SE37 can be used to validate a test.
Regards,
Jim

Scheduling siebel BI report not pulling data

Hi Gurus,
i have created report in Siebel with BI publisher, My report is working fine when i am running report from the icon. But when the same report running with scheduling option not pulling data in to my report. Is any other properties to set like viewmode something or user properties under integration object? If anyone have tried please provide me the steps.
Thanks in advacne,
Regards,
madhv

Hi ,
Please check the following :-
Is an appropriate summarization level defined?
Are fixed values stored in the definition of the summarization level?
Is the use of a summarization level necessary?
Was test mode activated in summarization level maintenance ?
Are the summarization levels in status "active" ?
Please have a detailed look into the SAP OSS Note : 67342 - CO-PA: No summarization level found which contains detials explanations and solutions for the issue ..
Kindly revert back for any further clarifications
Regards
Sarada

OBIEE Date Comparison report with multiple measures

Hello everyone...
I have a requirement where I need to create a date comparison report (Current Month vs. Prior Month vs Prior Month Year Ago vs YTD vs Prior YTD vs Rolling 3 months, etc) with multiple Measures (Quote count, Quote offered count, New Business count, etc). I am to generate this report in this fashion:
Quotes Current Month vs PM vs YoY Prior
Month Current Month Prior Year Current
YTD vs PM Prior
YTD Rolling 3 Months vs PM Prior Rolling 3 Months
Issued 120 120 123 1400 1020 1700 1580
Unique Risks
Offered 556 449 571 5881 6220 6101 5892
Unique Risk Close Ratio
Offered Close Ratio 21.6% 26.7% 21.5% 23.8% 16.4% 27.9% 26.8%
Bitmap
Avg Issued Premium 240 238 222 2801 2630 3104 2892
Avg Offered Premium
New Business
Count
Avg Full Term Premium
I understand that time series is an option, and have created the time series (which show up as measures).
My problem is:
when creating the report (even as a pivot table) , OBIEE is not allowing me to drag the measure to rows, nor is it allowing me to drag the time series to columns. Also, I need to do conditional formating on some of the columns showing an up arrow for increased vs. prior month and down arrow for decreased vs. prior month.
Does anyone have a solution for this issue? Any assistance would be greatly appreciated...
Please advise and thanks!!!

Jason,
You've been very helpful, but I guess I'm just not explaining myself that well. The Credit Memo's throw things off because they do not contain a "Paid Date" value. That field in the record is blank. Since it is blank the report query ignores them. Therefore when the report query returns all records that have a "Paid date" range of "x to y" they are never returned. This is a problem whenever a credit memo exists for an invoice because the "invoice total" never changes. So when a customer pays on their account for a particular invoice, they only pay what is due which is the "invoice total" minus any "credit" from the "Credit Memo". So when my A/R person receives payment they are showing the invoice paid in full because MAS automatically includes all invoices and credit memo's. My report does not because there is no data in the "Paid Date" field of the record for Credit Memos.
I've been doing alot research in trying to resolve this "exception" to my report. I think I may be on to something, but my knowledge of arrays is extremely limited. My resolution involves populating an array with the "invoice numbers" that are returned from the initial query from the supplied date range. Then using the "invoice numbers" from the array have it then populate my details section of the report with all of "invoice records" both the actual invoice record and any "credit memo" records. I can then group the records returned based upon the "invoice number". then within that grouping I can performing my calculations to show whether or not the invoice has been paid in full. What do you think? I've been able to populate an array with the invoice numbers based upon my date search range, but I have yet to figure out how to take that information and perform another lookup to pull in the rest of the data I need. Do you have any ideas?
Thanks. Bill

Query doesn't pull data within Report

Similar Messages

Maybe you are looking for