Query Filter on attribute

Hi,
I am designing the BEx Query that requires the data to be filtered based on the attribute value of an infoobject - both are available in the BEx Query.
However when I apply the Filter on the same infoobject in the BEx Query, it does not return me any data as result.
Can you please let me know if there is a better way to filter Query Results based on attribute of a characteristic.
Regards,
Amogh

Goto RSD1 > Infoobject Maintainence > Key in your Infoobject name & check the /BIC/M* table. Find all entries applicable for restriction. Make sure all the existing entries are same as that is visible at Info provider level. In BEx, if you are sure you are not going to make changes to query frequently, use Filters at Query level. Include all relevant entries you find applicable for your Characteristic Info object. As suggested in previous posts you need a Navigational Attribute for your Info object; if you want to capture Attribute data. Else, if you wish to create a filter at run time, use an input enabled Variable, which can capture Multiple Entries.

Similar Messages

Error Message in Query Filter on attribute of 0MATERIAL filters charac.

Hi All,
i have a query with few variables , i used navigational attributes of 0material......
I am getting the below Warning Message... Ineed to supress the below Error Message....
Please let me know the solution...
Error Message: Filter on attribute of 0MATERIAL filters charac. values without master data
Diagnosis
Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read.
There is a restriction on a navigation attribute of the listed characteristic in the query. This filters all characteristic values of the master-data bearing characteristic for which there is not yet master data out of the result.
For performance reasons, this filtering is unavoidable.
System Response
Procedure
In case of doubt, find other restirctions directly on the characteristic values of the characteristics contained in the DataStore object.
Procedure for System Administration
Notification Number DBMAN 345
Thanks All

Dear all SAP Gurus,
we've solved this problem and this is the solution:
The warning is triggered by the method CL_RSDRV_ODS_QUERY-PROCESS_SFC_WITH_ATR when the BExFlag of the InfoProvider is not set. Using DSOs for direct update there is no change to change the BExFlag. As a result queries based on a DSO for direct update always throw the above mentioned warning when filter-characteristics are attributes.
Regards, Clemens

Virtual Character in Bex Query / Filter by Attribute

Hi ,
We have a query where we need to resrict the query result by a character at run time. I think this is done by using virtuual characters with user exit RSR00002...Here is our requirement. We have the PCA query with Cost element heirarchy (Revenues & Expenses as nodes and several other sub nodes available) as the report out put and when we drill down by cost center user wants to see the result of blank cost centers only for Revnues but not for Expenses.
If this scenerio is not possible by virtual characters, I have a display attribute in Cost element where Revenues always have type 11 and Expenses have 1. So I need to exclude the cost center blanks for cost element type 1....But I'm not sure how to achieve this. Can any one advice if this is better to do in Info cube level / Bex query level...
Thanks

Hi,
This forum is for the BusinessObjects BI Solution Architecture. I would suggest you post your questions into the corresponding SAP BW Forum
regards
Ingo Hilgefort

Problems about query filter (BEx).

Hello there,
I have some problems about query filter (BEx).
I have master data and I want to use attribute in this master data to dynamic filter in query(BEx).
But this attribute is key figure. I can't done it now. TT
Is this possible? If yes, could anyone advise how this is to be done?
Thanks in advance.

Hi
In BEx there is option as 'Exceptions' & 'Conditions'. If you go in condition, you can specify range for key figure output. This is either predefined or by user selection. You create the condition as per your requirement & it will show you filtered data.
How to create conditions you will find easily on this site.
You can create as many conditions as no of filters you want. You can create these at query level also at report output level.

Sorting query in MDX query filter in PPS

Hi,
Iam new to the PPS world. Iam using MDX query filter and I need to create a filter field using the [BusinessLine].[Department] dimension. I need to sort the display value of Department in descending order in the filter and Iam using the following
Order([BusinessLine].[Department],[BusinessLine].[Department],DESC) in the query window while creating the filter. But Iam getting 'No value found'! result.
Please let me know Iam doing any mistake in this

Hi Umair,
Thanks for the reply
The department here is Attribute and BusinessLine is dimension in my cube.For other requirement(the department has to be sorted based on the creation date attribute) purpose I have kept department as composite key with other attribute called CREATE_DATE
with named column as department
Order (
[BuisnessLine].[Department].[DEPARTMENT],
[BusinessLine].[CREATE_DATE].Properties("Name"),
DESC
Iam just replacing the above query as it is in the Enter MDX formul? page
Is it correct.

Filter on attribute of 0MATERIAL filters charac. values without master data

Hi SAP-Gurus,
I've a problem while executing a query (this query is based on a MultiProvider).
I got the message "Filter on attribute of 0MATERIAL filters charac. values without master data" and I don't know why.
When I don't use the filter on the navigation attribute, the query can be executed without any errors, bute when I set the filter, the warning message comes again.
Thank you all,
Clemens

Dear all SAP Gurus,
we've solved this problem and this is the solution:
The warning is triggered by the method CL_RSDRV_ODS_QUERY-PROCESS_SFC_WITH_ATR when the BExFlag of the InfoProvider is not set. Using DSOs for direct update there is no change to change the BExFlag. As a result queries based on a DSO for direct update always throw the above mentioned warning when filter-characteristics are attributes.
Regards, Clemens

How can I use a variable in webi query filter

I created a webi report using the fiscal year/month(period) field as a filter to show a window of 18 periods. The report works just as requested using a between filter on fiscal period with prompts for both the start and ending periods. Now I'd like to calculate the start period based on what was entered in the prompt for the ending period (e.g. enter 201106 for the TO prompt on the between statement and have the FROM statement filled in as 201001.) I can create variables in the report to display both the user response to the ending period prompt and the calculated starting period, but I cannot figure out how to incorporate that calculated starting date into the FROM side of the between query filter.
Any suggestions?
Thanks,
Doug
Sorry I got my froms and to's mixed up in the first draft. Edited by: Doug Roswold on Mar 4, 2011 6:27 PM

Let me understand what you want to do. You don't want to use two prompts, just one, insn't it?
I mean, instead of:
Filter area:
Date between "From prompt" to "To Prompt"
You want something like:.
Filter area:
Date between Variable to "To Prompt"
if I'm not wrong that's not possible to achieve in Webi Query Panel.
Can you modify your universe? The only way to achieve it is modifying your universe, creating your formula in the universe and assigning it to an object, so you can use this new object in your filter area like this:
Date between MyUniverseObject to "To Prompt"
Edited by: PadawanGirl on Mar 4, 2011 8:15 PM

Error when using "inlist operator" in the query filter of Webi 3.1

Hi,
We are currently in the process of migrating Deski to webi (BOXI 3.1).
The problem is, Deski is using the "inlist" operator which is working fine but after migrating to webi the inlist operator in the query filter is throwing the below error,
*Error Message :*
A database error occured. The database error text is: ORA-00907: missing right parenthesis. (WIS 10901)
Appreciate your assistance on this.
Thanks !
Regards,
Perialt

Karthik ,
Yes I am seeing an additional paranthesis in Webi SQL query.
For example plz consider the product table below,
SELECT
Product.ID,
Product.Name
FROM Product
WHERE
Product.Name IN ( @Prompt('4) Name:','C','Product\Name-M',multi,free) )
As a work around in Custom SQL, If I remove the paranthesis the below query is running fine in webi
SELECT
Product.ID,
Product.Name
FROM Product
WHERE
Product.Name IN @Prompt('4) Name:','C','Product\Name-M',multi,free)
But I want a permanent solution.

Error while querying workflow message attributes for task

Can some one please help me with this error?
I get this error when I submit a task in worklist app. I have figure out that it is causing due to one payload in the table in the task. If remove that payload I am able to submit the task.
Error while querying workflow message attributes for task a99d1cf3-5e91-4c4a-8660-aeae91bfbec0 with version 5.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services.
oracle.jbo.JboException: Error while querying workflow message attributes.
Error while querying workflow message attributes for task a99d1cf3-5e91-4c4a-8660-aeae91bfbec0 with version 5.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services.
     at oracle.bpel.services.datacontrol.XSDDataControl.invokeOperation(XSDDataControl.java:460)
     at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:430)
     at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2144)
     at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:467)
     at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)

Can anybody help me on this?
I did some google but I get this only which is not much helpful.
http://download.oracle.com/docs/cd/E14571_01/core.1111/e10113/chapter_bpm_messages.htm

What are the Query criterion property attributes to search for KB's in SCCM 2012

A client is ask what servers might have a particular hotfix(ex: KB2798040) installed. The Hotifx is not in our WSUS catalog because it is not a critical security patch so it is not downloaded. What is the SCCM 2012 R2 Query criterion property attributes
to find a particular KB?

Depending on the OS of the client, that information may not be collected by default.
Rather than collecting all of the HotfixID class, instead, consider using DCM for this single HotfixID.
Sherry has previously posted about ways to do this,
http://myitforum.com/cs2/blogs/skissinger/archive/2011/08/17/non-security-hotfix-detection-for-windows-7-2008.aspx
and here's a post by Nick which seems to be based on the very same approach:
http://t3chn1ck.wordpress.com/2010/10/20/sccm-dcm-inventory-for-installed-windows-hotfixes/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Adding a list in Service Mananger Query Filter

In this post:
http://www.concurrency.com/blog/service-manager-request-query-result-filtering/
" The trick was to setup the simple list to include no initial results, which provided very fast form load and quick search
result return speeds. "
They have a list or a prompt in their query filter. Is there a site anywhere that explains what this is, or where to do this? I'm absolutely baffled and searching provides no documentation but sky-high level overviews.

Lets say you want to filter users based on department. You'll end up with two questions in your service offiering
Department to search in. refresh the next question after changing this value.
User.
the first question contains a simple list (see the table at
This Blog Post for more details on that)
[null]
LegitDepartment1
LegitDepartment2
LegitDepartment3
ETC...
the second question is your actual query result question. The Criteria on this is going to compare the user's department to the results of the first question. >when the form loads, it going to run the following query:
System.User where Department = [Null]
Since there are no users with a null department, this result will be empty and return immediately.
Then, the user goes down, hits the right department, and then hits refresh on the second question and gets the correct users, clicks the right one, and goes on with their life.

Bex Query Filter Page in BSP - Urgent Please...

I have seen many threads about Bex query in BSP, but can any one tell me how can i display the default Bex Query Filter page in BSP.
I created a query in Bex Query Designer and added few filters and when i execute i get a popup where i can enter the input values for which the report would be generated, can i get the same functionality or similar functionality if i have the same Bex query in BSP.
Also apart from the filters specified in the Bex, all the columns displayed in the report appears in the filter section how can get the same functionality BSP.
Note: I do not want to use Bex Web Application Designer
Please tell me the steps for the same.
Atleast please give me the steps at a high level. Please...

Hi,
1. Create a CKF, inside the CKF window create a new Formula Variable --> Right click in left side window on var and say create new Variable
2. Create new variable of replacement path type and reference Characteristic as the TO DATE value which you want to be max.
3. Now drag this new created var to CKF and save.
4. Now create condition with follwoing deatils:
Key Figure Operator Value
Max Date(CKF) TOP N 1
Save and execute your query. This will give you max value for the To Date field.
Hope it works .
Regards
Raj Rai

Use Yesterday as variable for Query Filter

Post Author: rrburton
CA Forum: WebIntelligence Reporting
I want to have a query filter that refers to the previous day. In regular SQL I would use something like "= trunc(sysdate)-1". I don't see any option for doing it this way in web intelligence, the closest it comes is selecting object and then assigning the Beginning of Last Week item from the System Date table. What am I missing?

Post Author: rrburton
CA Forum: WebIntelligence Reporting
Nevermind - I figured it out just now. It isn't very intuitive. In the Objects and Variables dialog in the SystemDate table there are a bunch of items like 1 day, 2 days, etc. and you select one of those and then in the code it looks like:
WHERE PKG_NTD_CONV.TO_ORCL_DATE(TROUBLE_TICKET_ARCHIVE.CREATE_DATE) = ( sysdate )-1
It should say something like 1 day ago, 2 days ago, etc.

Rich Client Query Filter Pane question

I've browsed through various forums without finding an answer to my problem. I'm frustrated and hope someone else has been there/done that and can offer a suggestion to ease my pain.
We're using BOXI 3.0, and my question is specifically about deciphering/maintaining the contents of the query filter pane in InfoView and/or Web Intelligence Rich Client.
We have some complicated reports with numerous optional prompts. We realize this is not optimal, but need to maintain this reports until we can replace them.
The filter panes are very complicated, since there are so many prompts, ANDs, and ORs and nested statements.
Is there a way to see which universe component a query filter field is connected to? In the query results pane (on top), I can click on a field and it's source is highlighted in the universe tree view on the left. That doesn't happen when you click a field in the query filter pane.
Is there some way I've not found yet, or is this an enhancement request for BOE? Thanks in advance.

I guess this an enhancement request for BOE because I've never seen an option like that. And I really wish that option existed.
The only way I could think of to solve this problem is renaming all the objects of your universe. This way you may know what class any object is related to when using the query filter panel.
For example: You have 3 classes in the universe: Users, Quotes, Invoices. Rename them with a prefix, let's say:
U-Users
Q-Quotes
I-Invoices
Then all the objects belonging to Users must be renamed with the U- prefix:
U-User name
U-User id
And the same applies for the other classes objects:
Q-Quotes:
    Q-quote id
    Q-User id
     Q-Amount
I-Invoices:
   I-Invoice id
   I-Quote id
   I-Amount
So if in one query filter panel you have a filter using the object Quote id, you'll see if this Quote id comes from Quotes or Invoices, because of the prefix Q- or I-.
I don't know if it is a good practice but I hope it helps.
Regards,
Erika Atencio Harris
Edited by: PadawanGirl on Jan 19, 2011 10:10 PM

WEBI Substraction of two classes in query filter

Please tell me how could i implement the following query in the WEBI rich client query filter.
and ( one."/BIC/ZORIG_DAT" - one.me_itmvalf ) < 364
AND ( abs(one."/BIC/ZINV_VAL") - abs(one."/BIC/ZSD_AFYV") > 1 )

First, you should know that there is a set of updateXXX() methods in Java 2.0. So, when you have the correct row of the resultSet in hand you can use:
updateString(3,"Hello world!")method to update the field in the column 3 to a String with value "Hello world!". This is just an example of course.
To make this example complete see this:
// assume you have the right row from the resultSet in hand.
// assume rs is your resultSet
int foo = rs.getInt(1);
foo += foo*0.05;
// and other calculations here
rs.updateInt(1,foo);
rs.updateRow(); // This line is here so as to make the changes
                // permanent.
                // No need to mention that you cannot change primary
                // keys...Second, I think I've given you a very clear example of what you can do. And since this is a Java assignment you don't want to be spoon-feeded, do you? :)
Hope this helped.
afotoglidis

Query Filter on attribute

Similar Messages

Maybe you are looking for