Query für niedrigsten Preis über alle Preislisten

Hallo Experten,
ich benötige einen Tip für meine beiden Query, die als Ergebnis aus der ITM1 den jeweils niedrigsten Preis anzeigen sollen.
Erster Query zeigt mir jedoch nur ItemCode und MinPreis an... ich sehe also nicht, aus welcher Preisliste
SELECT
T0.[ItemCode], 'MinPreis'= (SELECT MIN(T10.Price)
FROM ITM1 T10 WHERE T10.ItemCode=T0.ItemCode AND T10.Price > '0')
FROM ITM1 T0 GROUP BY T0.ItemCode
Nehme ich beispielsweise noch T0.PriceList hinein, so wird für jeden ItemCode die Preisliste gezeigt und ich muß mir von Hand (Excel) eine Gegenüberstellung bauen, wo ich den niedrigsten Preis, ItemCode und Preisliste sehe.
Query 2 ist recht ausführlich aber halt zu umfangreich, und ohne Nacharbeit in Excel nicht nutzbar:
SELECT distinct
T0.[ItemCode], T3.ItemName, T0.[PriceList], T2.ListName , T0.[Price], 'MinPreis'= (SELECT MIN(T10.Price)
FROM ITM1 T10 WHERE T10.ItemCode=T0.ItemCode and T10.Price > '0')
FROM ITM1 T0
INNER JOIN OPLN T2 ON T0.PriceList = T2.ListNum
INNER JOIN OITM T3 ON T0.ItemCode = T3.ItemCode
Where T0.Price > '0'
Order by T0.ItemCode, T0.Price asc
Hat jemand einen Tip, wie ich in einer Sicht:
Itemcode, Preisliste, niedrigsten Preis
erhalte ?
Vielen Dank für Eure Wissenswerte.
Gruß
Markus

Hi Steffen,
GENAU !!! Endgeil !
habe jetzt noch den ItemName reingebracht... so kann jeder meiner Kollegen was damit anfangen und die Preisgefüge prüfen:
SELECT T1.ItemCode, T4.Itemname, T1.Price, T3.ListName
FROM ITM1 T1
INNER JOIN (SELECT ItemCode, Min(Price) AS Price FROM ITM1 AS U WHERE Price > 0 GROUP BY ItemCode) AS T2
ON (T1.ItemCode = T2.ItemCode) AND (T1.Price = T2.Price)
INNER JOIN OPLN T3 ON T3.ListNum = T1.PriceList
INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode
Order by T1.ItemCode
Vielen Dank für Deine Mühen und Zeit.
Gruß
Markus

Similar Messages

What query should I use to find all versions of Office 2013 64-bit installed on client computers?

What query should I use to find all versions of Office 2013 64-bit installed on client computers? Could someone create a custom query? I need all of the client computers names and which ones have any Office 64-bit components. Thank you so much! I really
appreciate it!

Hi,
You could edit the following query to meet your requirement.
SELECT     dbo.v_R_System.Name0, dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System],
                      dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [OS Service Pack], arp.DisplayName0,
                      CASE WHEN arp.version0 LIKE '11.0.6361.0' THEN 'SP1' WHEN arp.version0 LIKE '11.0.7969.0' THEN 'SP2' WHEN arp.version0 LIKE '11.0.8173.0'
THEN 'SP3' WHEN
                       arp.version0 LIKE '12.0.6215.1000' THEN 'SP1' WHEN arp.version0 LIKE '12.0.6425.1000' THEN 'SP2' WHEN arp.version0 LIKE '14.0.6029.1000'
THEN 'SP1' ELSE '' END
                       AS 'Service Pack', arp.Version0
FROM         dbo.v_Add_Remove_Programs AS arp INNER JOIN
                      dbo.v_R_System ON arp.ResourceID = dbo.v_R_System.ResourceID INNER JOIN
                      dbo.v_RA_System_SMSInstalledSites AS ASSG ON dbo.v_R_System.ResourceID = ASSG.ResourceID INNER JOIN
                      dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID
WHERE     (arp.DisplayName0 LIKE '%Microsoft Office%edition%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2010%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office 2000%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office XP%') AND (arp.DisplayName0 NOT LIKE '%update%') AND
                      (arp.DisplayName0 NOT LIKE '%Microsoft Office XP Web Components') AND (dbo.v_R_System.Operating_System_Name_and0 NOT LIKE '%server%')
AND
                      (arp.InstallDate0 NOT LIKE 'NULL')
ORDER BY dbo.v_R_System.Name0, arp.DisplayName0, arp.Version0
Full details:http://social.technet.microsoft.com/Forums/systemcenter/en-US/7baeb348-fb63-4115-8d76-2c884d18f708/sql-query-to-check-ms-office-service-pack-level?forum=configmgrreporting
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Query to get the data of all the columns in a table except any one column

Can anyone please tell how to write a query to get the data of all the columns in a table except one particular column..
For Example:
Let us consider the EMP table.,
From this table except the column comm all the remaining columns of the table should be listed
For this we can write a query like this..
Select empno, ename, job, mgr, sal, hiredate, deptno from emp;
Just to avoid only one column, I mentioned all the remaining ( 7 ) columns of the table in the query..
As the EMP table consists only 8 columns, it doesn't seem much difficult to mention all the columns in the query,
but if a table have 100 columns in the table, then do we have to mention all the columns in the query..?
Is there any other way of writing the query to get the required result..?
Thanks..

Your best best it to just list all the columns. Any other method will just cause more headaches and complicated code.
If you really need to list all the columns for a table because you don't want to type them, just use something like...
SQL> ed
Wrote file afiedt.buf
1 select trim(',' from sys_connect_by_path(column_name,',')) as columns
2 from (select column_name, row_number() over (order by column_id) as column_id
3        from user_tab_cols
4        where column_name not in ('COMM')
5        and   table_name = 'EMP'
6       )
7 where connect_by_isleaf = 1
8 connect by column_id = prior column_id + 1
9* start with column_id = 1
SQL> /
COLUMNS
EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,DEPTNO
SQL>

Query to get a listing of all folders and joins in EUL

If anybody has a query that provides a listing of all folders and joins between those folders in a Discoverer EUL, can you please share it.
Any help would be greatly appreciated.

Hi
As Rod commented you won't get an accurate listing going through XREFS. You need to look in the statistics table, EUL5_QPP_STATS where you will find a history of all worksheets that have been executed. Unfortunately the item columns in EUL5_QPP_STATS are encoded so you will need some special SQL to uncode them.
First of all you will need to have installed the EUL extensions which can be found in the script called EUL5.SQL (located in the Discoverer\Util folder where Admin is installed) when logged in as the owner of the EUL. Theh try running this script, altering the data switch to a suitable date:
SELECT
QS.QS_DOC_OWNER USER_NAME,
QS.QS_DOC_NAME WORKBOOK,
QS.QS_DOC_DETAILS WORKSHEET,
TRUNC(QS.QS_CREATED_DATE) EXECUTION_DATE,
*(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 ITEMS,*
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),1, 6)) ITEM1,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),10, 6)) ITEM2,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),19, 6)) ITEM3,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),28, 6)) ITEM4,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),37, 6)) ITEM5,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),46, 6)) ITEM6,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),55, 6)) ITEM7,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),64, 6)) ITEM8,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),73, 6)) ITEM9,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),82, 6)) ITEM10,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),91, 6)) ITEM11,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),100,6)) ITEM12,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),109,6)) ITEM13,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),118,6)) ITEM14,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),127,6)) ITEM15,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),136,6)) ITEM16,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),145,6)) ITEM17,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),154,6)) ITEM18,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),163,6)) ITEM19,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),172,6)) ITEM20
FROM
EUL5_QPP_STATS QS
WHERE
*(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 < 21*
AND QS.QS_CREATED_DATE > '01-JAN-2009'
Best wishes
Michael

Tricky SQL query... how to get all data in a single query?

create table employee_definition (def_id number, def_name varchar(50));
insert into employee_definition values (100, 'EMAIL');
insert into employee_definition values (200, 'MOBILE_PHONE');
insert into employee_definition values (300, 'HOME_PHONE');
SQL> select * from employee_definition;
    DEF_ID DEF_NAME
       100 EMAIL
       200 MOBILE_PHONE
       300 HOME_PHONE
create table employee_data (def_id number, def_value varchar(20), emp_id number);
insert into employee_data values (100, '[email protected]', 123);
insert into employee_data values (200, '01232222', 123);
insert into employee_data values (300, '5555', 123);
insert into employee_data values (100, '[email protected]', 666);
insert into employee_data values (200, '888', 666);
insert into employee_data values (300, '999', 666);
insert into employee_data values (300, '444', 777);
SQL> select * from employee_data;
    DEF_ID DEF_VALUE                EMP_ID
       100 [email protected]              123
       200 01232222                    123
       300 5555                        123
       100 [email protected]              666
       200 888                         666
       300 999                         666
       300 999                         777
7 rows selected.I'm supposed to create a SQL that will return me the email, mobile_phone, and home_phone for a set of employees. The result will be something like this:
EMPLOYEE ID | HOME_PHONE | MOBILE_PHONE | EMAIL
123         | 5555 |    01232222      | [email protected]
666         | 999 |    888      | [email protected]
777         | 444 |    null     | nullThe thing I'm finding difficulty here is that the same column is used to store different values, based on the value in employee_definition table (something like a key/value pair). If I do:
SQL> select emp_id, def_value as email from employee_data, employee_definition
2 where employee_data.def_id = employee_definition.def_id
3 and employee_definition.def_name = 'EMAIL';
    EMP_ID EMAIL
       123 [email protected]
       666 [email protected]'s partially ok.. I'm just getting the definition for 'EMAIL'. But how can I get all the values in a single query, knowing that the column stores different values based on def_name?

Oh no, not again.
Entity attribute models always seem like a great idea to people who have been in the profession for five minutes and lack any kind of fundamental knowledge.
It staggers me that someone with 2,345 posts still believes "you need a 'detail table' for [storing multiple telephone numbers]"
"A person can have multiple telephone numbers" is not an excuse to build a tired person_attribute table. Niether is the bizarre proposal by someone with over 4k posts who should know better in an earlier post that EAV models are necessary to support temporal fidelity.
Taken to it's logical conclusion, EAV modelling leads to just two application tables. THINGS and THING_ATTRIBUTES. And when you consider that a THING_ATTRIBUTE is also a THING, why not roll those two tables up into one also? Hmmm, what does THINGS and THING_ATTRIBUTES look like? I know, TABLES and COLUMNS. Who would've guessed? SQL already provides the completely flexible extensible attribute model the advocates of EAV proscribe. But it also has data types, physical data independence, constraints and an efficient query language which EAV does not.
EAV modelling errodes the semantics of the attributes which are bundled into the "attribute" table.
There is no point in storing 12 different phone numbers with implied functional dependency to unconstrained and often repeating notional attributes like "MOBILE", "LANDLINE", "WORK", err, "WORK2", err, "MOBILE2", err, ... when this phone type attribute has no semantic value. When you want to call someone, you invariably want to retrive the prefered_phone_number which may depend on a time of day, or a call context.
These things need to be modelled properly (i.e normalised to BCNF) within the context of the database.

Dynamic Select Query including Dynamic Tables with For all Entries

Hello everyone,
I need to create a select query which involves using of Dynamic Tables.
Suppose I have a dynamic table <d1> which consist of let say 10 records.
Now i need to make a select query putting data into another dynamic table <d2>
CONCATENATE keyfield '=' '<d1>' INTO g_condition SEPARATED BY space.
CONCATENATE g_condition '-' keyfield INTO g_condition.
SELECT * FROM (wa_all_tables-name) INTO CORRESPONDING FIELDS OF TABLE <d1>
        FOR ALL ENTRIES IN <d1>
WHERE (g_condition).
But it is giving dump.
Please help me on this....

Short text
    A condition specified at runtime has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "ZNG_CUSTOMWRITE" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
    procedure "WRITE_ARCHIVE_PROD" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The current ABAP program has tried to execute an Open SQL statement
    which contains a WHERE, ON or HAVING condition with a dynamic part.
    The part of the WHERE, ON or HAVING condition specified at runtime in
    a field or an internal table, contains the invalid value "ZCOURIER-ZCOURIERID".
CONCATENATE keyfield '=' g_header INTO g_condition SEPARATED BY space.
CONCATENATE g_condition '-' keyfield INTO g_condition.
SELECT * FROM (wa_all_tables-name) INTO CORRESPONDING FIELDS OF TABLE <dyn_table1>
FOR ALL ENTRIES IN <dyn_table>
WHERE (g_condition).

Query for tasks assigned individually to all members of a user group

I am looking for a query that will allow me to create a list view that will show all tasks assigned to the current user (in the Assigned To field), as well as to other members of the user group that the current user belongs to. The scenario is that we want
a student to see tasks assigned to them, as well as to other students in the class. Each class is its own user group. I have seen a lot of examples where the filter shows tasks assigned to the current user and the current users group - that is NOT what I am
looking for.
For example - Todd (me), Fred and John are members of one user group. When I look at this class view, I should see tasks assigned to me, as well as those assigned directly to Fred and John.
Does anyone have a CAML query for this? I am thinking it would need to include the SPGroup element. Thanks!

Hi William,
I've tried this, but it isn't working for me. Should I chnge the Smart Group, to an ordinary one?
Thanks

Database query in MaxL DBS-Name list all file information failed

When I tried list all file information command in MaxL it gave me an error saying the user doesn't exist. When I check the user through display user; command in MaxL I get the information as listed below.
Is there something wrong with the way the user was created ?
How can I (Admin) get the index and data file information?
MAXL> query database Application.Database list all file information;
   ERROR - 1051012 - User ADMIN@Native Directory does not exist.
MAXL> display user;
user                description         logged in           password_reset_days enabled             change_password     type                protocol
   conn param          application_access_
+-------------------+-------------------+-------------------+-------------------+-------------------+-------------------+-------------------+-----------------
--+-------------------+-------------------
ADMIN@Nati                                    TRUE                   0                TRUE               FALSE                   3 CSS
   native://DN=cn=911,                   1

Has anyone resolved the problems with using TNSFormat?
As is, I want to move to a shared server setup and to do that I want to use TNSFormat and point to a tns entry which is setup for IPC+Shared connection.
But the Oracle Home that has the Oracle HTTP Server (from the companion CD) does not have SQL*net installed and does not seem to understand TNS.
I have TNS_ADMIN setup, I have ORACLE_HOME_LISTENER poiting to the DB Home.
for the OHS home, using "sqlplus login/pw@ipcshared" works, but "tnsping ipcshared" does not, since tnsping does not exist in the OHS home.
I cannot install SQL*Net from the CD1, since it requires a dedicated/new home and does not want to install in the OHS Home.
The only format that works in a dedicated OHS Home setup is ServiceNameFormat.
Any help or input would be very helpful.
Regards
ps. This is a redhat linux setup.
Message was edited by:
Oli_t

Need sql query to remove duplicates using UNION ALL clause

Hi,
I have a sql query which has UNION clause.But the UNION clause is causing some performance issues.
To overcome that I have used UNION ALL to improve performance but its returning duplicates.
Kindly anyone send a sample SQL query where my primary objective is used to use UNION ALL clause and to consider unique rows (elimating duplicate
ones)
Any help will be needful for me
Thanks and Regards

why not UNION? :(
another way also use MINUS
SQL>
SQL> with t as
2 (
3 select 1 if from dual union all
4 select 2 if from dual union all
5 select 1 if from dual union all
6 select 3 if from dual union all
7 select 3 if from dual
8 )
9 ,t2 as
10 (
11 select 1 if from dual union all
12 select 2 if from dual union all
13 select 3 if from dual union all
14 select 4 if from dual union all
15 select 5 if from dual
16 )
17 (select if from t
18 union all
19 select if from t2)
20 /
        IF
         1
         2
         1
         3
         3
         1
         2
         3
         4
         5
10 rows selected
SQL> so
SQL>
SQL> with t as
2 (
3 select 1 if from dual union all
4 select 2 if from dual union all
5 select 1 if from dual union all
6 select 3 if from dual union all
7 select 3 if from dual
8 )
9 ,t2 as
10 (
11 select 1 if from dual union all
12 select 2 if from dual union all
13 select 3 if from dual union all
14 select 4 if from dual union all
15 select 5 if from dual
16 )
17 (select if from t
18 union all
19 select if from t2)
20 minus
21 select -99 from dual
22 /
        IF
         1
         2
         3
         4
         5
SQL>

Query returns list of objects with all fields = NULL

Hi there,
I must be doing something wrong. I have tried to query for all activities and all contacts using the code pattern shown below (for activities):
Activity_ServiceLocator serviceLocator = new Activity_ServiceLocator();
serviceLocator.setActivityEndpointAddress(config.get(CONFIG_KEY_URL) + ";jsessionid=" + sessionId);
ActivityQuery aq = new ActivityQuery();
ListOfActivityQuery laq = new ListOfActivityQuery();
laq.setActivity(aq);
ActivityQueryPage_Input aqpi = new ActivityQueryPage_Input();
aqpi.setListOfActivity(laq);
laq.setPagesize(new BigInteger("100"));
laq.setStartrownum(new BigInteger("0"));
ActivityQueryPage_Output aqpo = serviceLocator.getActivity().activityQueryPage(aqpi);
When I do getListOfActivity() from the ActivityQueryPage object, I get a non-empty list, however, when I loop over the list, it seems that all fields in all the objects are NULL. This, even though I have checked in the system that the activities (appointments) all contain fields with data.
As mentioned, when I try to query for all contacts using the exact same code pattern, I also get a non-empty list of (contact) objects with non-empty fields .. So, I guess I'm doing a simple mistake (since I have hundreds of contacts in my CRM system), but which?
Thx in advance

Okay, I partly found the answer myself. It appears that one has to explicitly set a (empty) query type for the fields that one wants returned from the query .. At least this appears to return the field value of the returned objects .. But is this really the correct way of doing it?
A few related questions;
1) What is the purpose of the UseChildAnd? I cannot read this from the documentation!
2) Is there any more documentation than the Oracle CRM On Demand Release 16? I would like to have some more documentation on
a) how to make a cross table query, e.g. across activities and contacts (for instance, give me all contact who have an appointment tomorrow), and
b) how to use the QueryType.
Any references to something that can enlighten me? :-)

Query to check item no in all the rows in a sales order

Dear All,
Please assist me with a query which would be able to check the rows in a sales order to see if a particular item no is present. We are using SAP B1 2005 PL50
Kind Regards,
Monil.

Hi !
Try this !
if @object_type = '17' and @transaction_type IN ('A', 'U')
BEGIN
if not exists (select t0.docentry from ORDR T0,RDR1 T1 where
t0.Docentry = @list_of_cols_val_tab_del and
t0.Docentry=T1.Docentry and
T1.Itemcode in (select o1.itemcode from oitm o1) and T1.Itemcode = 'XXXXX'
begin
select @error = 1, @error_message = 'Add the item'
end
end
Replace XXXXXX with your itemcode !

Query structure with does not display all rows in VC

Hello Gurus,
I am trying to build a query based VC application.
I have a Row structure and Column structure in the query, but when I drag the query into ivew, I only see name of the structure but not the rows in the structure. At the same time when I deploy it is showing me all the rows in the result. I also did "Define/test query" and pressed the "Generate" button, but It is showing me only Colum struture rows but not Row strucure rows.
Any help in this issues is very much appreciated.
Thanks in advance
ganesh

Hi Mario,
To overcome this limitation is possible to substitute the VC Table with WAD Table and keep the functionality of send events (like open a pop-up after user click)?
Best Regards,
Marcos

Query to find Orders that have all LINES CLOSED status

All,
CAn someone send me SQL QUERY TO find all ORDERS that have all LINES in CLOSED status.
we have an issue in an environment, i am trying to build a data fix script.
regards
girish

Hi,
Try this :
Method-1 (backend):
*==============*
select a.order_number, b.line_number, b.flow_status_code
from oe_order_headers_all a, oe_order_lines_all b
where a.header_id = b.header_id
and a.org_id= &Org_id -- Operating_unit_id
and a.org_id = b.org_id
and b.flow_status_code='CLOSED'
Method-2 (front end)
*==============*
Orders,Returns --> Order Organizor --> Find orders/Quotes form will open --> Close this serch page only.... --> Now you will able to see Order oganizor form --> Click on Lines Tab of this form (you will see this tab atleft bottom side of the page) --> Press F11.. --> In status Field give parameter as *"CLOSED"..*and press Ctrl + F11 ..... Take an export of the form output..
Risk : this query may take hell lot of time to complete..as it is going to pull all closed line of a particular Org..
Method-3
*========*
Check if you can find any oracle standard report for closed lines..
Hope this will help..
Regards :)
S.P DASH

Query on getting the Pane with all the items for creating Views

Hi Group,
I have a query as under:
I was trying to create a sample Web Dynpro ( for ABAP ) using tcode SE80 and while creating view, I have to get the Pane with the items ( eg., Radio element, text fields, text areas, etc., kind of all UI Elements )....
But, I was not able to get while defining the View for the Web Dynpro application....
Please let me know if any setting has to be done to get this or any other clue as to get this Pane...
Thanks in advance.
Regards,
Vishnu.

hi vishnu....
make sure you have given the host and port in the local host file in c:/.
[link|help.sap.com/saphelp_erp2005/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm ].
---regards,
alex b justin

Query für eine UDT über eine andere Datenbank auf anderem SQL-Server

Guten Mittag,
ich möchte gerne eine Abfrage über eine UDT machen, die aber auf einem anderen Server in einer anderen Datenbank angelegt wurde.
der normale Weg über eine SAP-Tabelle funktioniert einwandfrei, z.B:
select* from [Server].DataBase.dbo.OITM
aber bei dem Versuch mit einer UDT klappt es nicht:
select* from [Server].DataBase.dbo.[@UDT]
Hat jemand eine Idee, wie eine benutzerdefinierte Tabelle über Datenbank und Server hinweg per Query ausgelesen werden kann ?
Vielen Dank für Eure Wissenswerte.
Gruß
Markus

Hi Markus,
also ohne Server kein Problem..?
Hier ein Funktionierendes SQL:
select * from [SBODemoDE].[DBO].[@COR_ACCT_CONF]

Query für niedrigsten Preis über alle Preislisten

Similar Messages

Maybe you are looking for